v3d_mmu_set_page_table() ends by calling v3d_mmu_flush_all() to flush the
MMU cache and clear the TLB after reprogramming V3D_MMU_PT_PA_BASE.
v3d_mmu_flush_all() is gated by pm_runtime_get_if_active(), which returns
0 unless runtime_status == RPM_ACTIVE.
v3d_mmu_set_page_table() is called from two paths that *know* V3D is
reachable, but where the runtime PM status might be wrong:
1. v3d_power_resume(): the runtime resume callback itself, where
runtime_status is RPM_RESUMING.
2. v3d_reset(): called from the DRM scheduler timeout handler with the
hung job's pm_runtime reference held, so RPM_ACTIVE, but here we
don't need to take an extra reference for the duration of the flush
either.
In the first case pm_runtime_get_if_active() returns 0, the flush is
silently skipped, and V3D resumes executing with whatever MMUC/TLB state
happened to survive the last reset. This can leave stale translations
live across runtime PM cycles, manifesting as random GPU hangs.
Split the actual flush sequence into a helper that does the writes
unconditionally, and have v3d_mmu_set_page_table() call it directly.
Fixes: 458f2a712a ("drm/v3d: Introduce Runtime Power Management")
Link: https://patch.msgid.link/20260530-v3d-fix-rpi4-freezes-v1-2-c2c8307da6ce@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Add OV5645 camera device node and enable relevant components in the
video capture data path, so output stream can be captured, and the
camera itself can be controlled over I2C bus.
This is roughly based on descriptions found in downstream kernel tree [1],
adapted to match upstream bindings.
Link: ce8fd74abf/arch/arm/boot/dts/imx7d-pico.dtsi (L874) [1]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Replace the vendor-specific PHY compatible string with the generic
ethernet-phy-ieee802.3-c22 compatible.
The marvell,88E1510 compatible is listed in whitelist_phys[] and is
never matched against a PHY driver. PHY devices are expected to use
the generic ethernet-phy-ieee802.3-c22 compatible unless a specific
MDIO driver match is required.
The 88E1510 is compatible with Clause 22 PHY devices, so use the
generic compatible string instead.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dtb: /soc/bus@2100000/ethernet@2188000/mdio/ethernet-phy@0: failed to match any schema with compatible: ['marvell,88E1510']
Known other user (uboot) did not use marvell,88E1510.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The edt,edt-ft5x06 compatible is not referenced in
drivers/input/touchscreen/edt-ft5x06.c and is not documented.
There is no publicly available datasheet or binding information that
distinguishes edt-ft5206/ft5306/ft5406 variants and the driver treats these
FT5x06-family controllers with the same configuration model. So switch to
the lowest common and documented baseline compatible edt,edt-ft5206.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dtb: /soc/bus@60000000/i2c@63fc8000/touchscreen@38: failed to match any schema with compatible: ['edt,edt-ft5x06']
ABI impact consideration:
Not affect Linux kernel. The I2C subsystem uses a legacy fallback mechanism
where it strips the vendor prefix from the compatible string to derive the
client name, resulting in edt-ft5x06
{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
After this, the driver was actively binding to these devices based on the
compatible string.
Known user (U-Boot) does not parse or use edt,edt-ft* touchscreen
compatibles.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove the undocumented and unused compatible karo,imx6qdl-tx6-sgtl5000 and
retain only the generic simple-audio-card sound configuration.
The karo,imx6qdl-tx6-sgtl5000 compatible is not documented and is not
referenced by any in-kernel driver. The audio setup is already fully
described using simple-audio-card, which is the standard and supported
binding for this hardware configuration.
No known users (such as uboot) rely on karo,imx6qdl-tx6-sgtl5000.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dtb: /sound: failed to match any schema with compatible: ['karo,imx6qdl-tx6-sgtl5000', 'simple-audio-card']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add bus-type (MEDIA_BUS_TYPE_PARALLEL) for ov5642/ov5640. i.MX53 and
i.MX6UL only supports parallel csi interface. Fix below CHECK_DTBS
warnings:
arm/boot/dts/nxp/imx/imx53-smd.dtb: ov5642@3c (ovti,ov5642): port:endpoint: 'bus-type' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Remove redundant bus-width property according to video-mux.yaml to fix
below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: ipu1_csi0_mux (video-mux): port@4:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/video-mux.yaml
The bus-width already set at remote endpoint (camera).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add required power-supply and vdd-supply properties to fix below CHECK_DTB
warnings:
arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dtb: panel (edt,etm0700g0dh6): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh.
Fixes: 36c75ce3bd ("nd_btt: Make BTT lanes preemptible")
Assisted-by: Claude-Sonnet:4.5
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260528021625.618462-1-alison.schofield@intel.com
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
The detect hook of connectors - called by HPD polling - will check if
user accesses are enabled and prevent the connector detection if that's
not the case. Accordingly enable user accesses during system resume by
calling intel_display_driver_enable_user_access() before enabling HPD
polling.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/f9803b937ba3044052a81e1673ac374809548ba7.1780310011.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A pending hotplug work or the encoder suspend/shutdown hooks may still
require display IRQs at least for AUX accesses, so keep all display IRQs
except for hotplug IRQs enabled until after intel_hpd_cancel_work() and
the encoder suspend/shutdown hooks are called during system suspend and
shutdown.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/0b4b4d489f91be9334554e5438d3f2aa79421d42.1780310011.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Having a stray kconfig symbol in the middle of the PROCESSOR_SELECT menu
(this symbol plus its dependent symbols) causes the menu dependencies
not to be displayed correctly in "make {menu,n,g,x}config".
Move the BROADCAST_TLB_FLUSH symbol away from the PROCESSOR_SELECT menu
so that the list of processors is displayed correctly.
Fixes: 767ae437a3 ("x86/mm: Add INVLPGB feature and Kconfig entry")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260519173526.10985-1-rdunlap@infradead.org
This pull request contains fixes for building the zx29 SoC documentation
contributed by Randy Dunlap.
-----BEGIN PGP SIGNATURE-----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=ycVR
-----END PGP SIGNATURE-----
Merge tag 'zx29-docfix-for-7.2' of https://gitlab.com/stefandoesinger/zx297520-kernel into soc/arm
ARM: zte: clean up zx297520v3 doc. warnings
This pull request contains fixes for building the zx29 SoC documentation
contributed by Randy Dunlap.
* tag 'zx29-docfix-for-7.2' of https://gitlab.com/stefandoesinger/zx297520-kernel:
ARM: zte: clean up zx297520v3 doc. warnings
Signed-off-by: Linus Walleij <linusw@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jaeM
-----END PGP SIGNATURE-----
Merge tag 'cix-dt-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix into soc/dt
- Add cpuidle and cpufreq support for Sky1
* tag 'cix-dt-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
arm64: dts: cix: Add CPU idle states for Sky1
arm64: dts: cix: Add SCMI performance domains for CPUFreq on Sky1
Signed-off-by: Linus Walleij <linusw@kernel.org>
mx31_read_cpu_rev() maps the IIM registers with of_iomap() to read the
silicon revision, but returns without unmapping the MMIO mapping.
Keep the normalized revision value in a local variable and route the
return path through iounmap() after the revision register has been read.
Fixes: 3172225d45 ("ARM: imx31: Retrieve the IIM base address from devicetree")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add minimal device trees for all t8122 based devices. The devices are
- iMac (24-inch, M3, 2023)
- MacBook Air (13-inch, M3, 2024)
- MacBook Air (15-inch, M3, 2024)
- MacBook Pro (14-inch, M3, 2023)
The device trees have a minimal set of devices limited to CPU cores,
interrupt controller, power states, watchdog, serial, pin controller,
i2c and the boot framebuffer.
The device trees for the notebooks add a PWM controller for the keyboard
LED illumination.
The iMacs and the 14-inch device trees add the i2c based Apple cd321x
USB Type-C port controller.
Co-developed-by: Michael Reeves <michael.reeves077@gmail.com>
Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-5-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The Apple devices with the t8122 SoC (M3) are very similar to their M1
and M2 predecessors.
Only the 13-inch Macbook Pro is replaced by a 14-inch version based on
the design of the 14-inch Macbook Pro with (M1/M2 Pro/Max). The Mac mini
was not offered with M3.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-4-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The PWM controller on the Apple silicon t8122 (M3) SoC is compatible
with the existing driver. Add "apple,t8122-fpwm" as SoC specific
compatible under "apple,s5l-fpwm" used by the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-3-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The device power state management of the PMGR blocks on Apple's t8122
SoC (M3) is compatible with the existing driver.
Add "apple,t8122-pmgr-pwrstate" as SoC specific compatible under the
existing "apple,t8103-pmgr-pwrstate" used by the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-1-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The PMGR blocks on Apple silicon M3 SoCs (t8122) are compatible with the
M1 and M2 predecessors. Add "apple,t8122-pmgr" as M3 specific
compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260505-apple-m3-initial-devicetrees-v2-1-b0c2f3519e0e@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
When writing queries to >control, flags are parsed 1st, since they are
the only required field, and they require specific compositions. So
if the flags draw an error (on those specifics), then keyword errors
aren't reported. This can be mildly confusing/annoying, so explain it
instead.
cc: linux-doc@vger.kernel.org
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260502-dyndbg-doc-v1-2-67cc4a93a77e@gmail.com>
commit 47ea6f99d0 ("dyndbg: use ESCAPE_SPACE for cat control")
changed the control-file to display format strings with "\n" rather
than "\012". Update the docs to match the new reality.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260502-dyndbg-doc-v1-1-67cc4a93a77e@gmail.com>
Update file paths for sticore references that
became stale when drivers were reorganized:
- drivers/video/console/sticore.c -> drivers/video/
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260531140541.4115641-1-costa.shul@redhat.com>
The man page reference appeared twice - once as plain text and
once as a hyperlink. Remove the plain text duplicate.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260531141823.4118954-1-costa.shul@redhat.com>
Update two file paths that became stale when kgdb/kdb sources
were reorganized:
- kernel/debugger/debug_core.c -> kernel/debug/debug_core.c
- drivers/char/kdb_keyboard.c -> kernel/debug/kdb/kdb_keyboard.c
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260531140207.4114764-1-costa.shul@redhat.com>
The sonypi.h header was moved from drivers/char/ to
include/linux/. Update the reference.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260531135850.4113774-1-costa.shul@redhat.com>
The sa1100ir parameter referenced drivers/net/irda/sa1100_ir.c,
which was removed along with the entire IrDA stack in commit d64c2a7612
("staging: irda: remove the irda network stack and drivers").
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260531135455.4113157-1-costa.shul@redhat.com>
Add text for some undescribed iommu= parameters (merge, nomerge,
biomerge, panic, nopanic, pt, nopt). Add "usedac" and its description.
Add that iommu=pt is equivalent to iommu.passthrough=1
and that iommu=nopt is equivalent to iommu.passthrough=0.
Move the PPC/POWERNV heading & its option "nobypass" to a separate
area since the current "iommu=" applies only to X86 (according to
its heading).
Unindent the AMD GART IOMMU options heading to make it stand out.
Also add its kconfig symbol name to be explicit about what these
options apply to.
Make sure that the IOMMU options that are listed under AMD Gart
HW IOMMU-specific options are only for that product; i.e., add "force"
there and move "merge", "nomerge", and "panic" to the general IOMMU
options area.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260528054611.1524937-1-rdunlap@infradead.org>
Pull MD updates and fixes from Yu Kuai:
"Bug Fixes:
- Only requeue dm-raid bios when dm is suspending. (Benjamin Marzinski)
- Reset raid10 read_slot when reusing r10bio for discard. (Chen Cheng)
- Fix raid1/raid10 deadlock in read error recovery path.
(Abd-Alrhman Masalkhi)
- Fix raid1/raid10 error-path detection with md_cloned_bio().
(Abd-Alrhman Masalkhi)
- Fix raid1/raid10 bio accounting for split md cloned bios.
(Abd-Alrhman Masalkhi)
- Fix raid1 nr_pending leak in REQ_ATOMIC bad-block path.
(Abd-Alrhman Masalkhi)
Improvements:
- Skip redundant raid_disks updates when the value is unchanged.
(Abd-Alrhman Masalkhi)
Cleanups:
- Update MAINTAINERS email addresses. (Yu Kuai, Li Nan)
- Clean up raid1 read error handling. (Christoph Hellwig)
- Move the exceed_read_errors condition out of fix_read_error().
(Christoph Hellwig)
- Use str_plural() in raid0 dump_zones(). (Thorsten Blum)"
* tag 'md-7.2-20260531' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid0: use str_plural helper in dump_zones
raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path
md/raid1: move the exceed_read_errors condition out of fix_read_error
md/raid1: cleanup handle_read_error
md/raid1,raid10: fix bio accounting for split md cloned bios
md/raid1,raid10: fix error-path detection with md_cloned_bio()
md/raid1,raid10: fix deadlock in read error recovery path
md/raid10: reset read_slot when reusing r10bio for discard
md: skip redundant raid_disks update when value is unchanged
dm-raid: only requeue bios when dm is suspending
MAINTAINERS: Update Li Nan's E-mail address
MAINTAINERS: update Yu Kuai's email address
Replace 'This are' with 'These are' in the md sysfs speed limit
section to correct grammar and improve readability.
Signed-off-by: Miguel Martín Gil <miguel.martin.gil.uni@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260525214554.2196-1-miguel.martin.gil.uni@gmail.com>
Commit 9edd04c418 ("docs: Raise minimum pahole version to 1.26 for
KF_IMPLICIT_ARGS kfuncs") raised the minimum required pahole version
from 1.22 to 1.26 in the requirements table and added a paragraph
explaining the failure mode for distributions still shipping pahole
v1.25 (e.g. Ubuntu 24.04 LTS).
The next day, commit ece7e57afd ("docs: changes.rst and ver_linux:
sort the lists") came through a different tree (docs vs sched_ext) and
re-flowed the table alphabetically, but its base did not include
9edd04c418. When the two commits met in mainline, the textual rewrite
of the table won and the version bump was lost. The added "Since Linux
7.0..." paragraph also disappeared.
The result is that changes.rst on master (v7.1-rc5) lists pahole 1.22
again, even though sched_ext kfuncs annotated with KF_IMPLICIT_ARGS
genuinely require v1.26 to produce a correct vmlinux BTF. Users on
distributions with pahole v1.25 hit "func_proto incompatible with
vmlinux" when loading any sched_ext BPF program (scx_simple,
scx_qmap, ...) and have no documentation pointing them at the version
gap.
Restore both changes from 9edd04c418.
Fixes: ece7e57afd ("docs: changes.rst and ver_linux: sort the lists")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260526022033.1301884-1-zhanxusheng@xiaomi.com>
The first parameter should match the variable that the allocated memory
is assigned to. Fix the example accordingly, the one for kmalloc_obj got
it right already.
Fixes: 7c6d969d53 ("Documentation: adopt new coding style of type-aware kmalloc-family")
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260529081006.2019687-2-ukleinek@kernel.org>
Update the content of the maintainer-handbooks documentation
to Brazilian Portuguese.
Signed-off-by: Amanda Corrêa <amandacorreasilvax@gmail.com>
Acked-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260528041958.57231-1-amandacorreasilvax@gmail.com>
Add the Brazilian Portuguese (pt_BR) translation for the
'development-process.rst' and '2.process.rst' files under
the 'process/' directory.
The main 'index.rst' file is also updated to include references
to the newly translated documents in the toctree.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260527155350.202569-1-danielmaraboo@gmail.com>
v3d_clean_caches() starts the cache-clean sequence by writing
V3D_L2TCACTL_TMUWCF to V3D_CTL_L2TCACTL and then polling for that bit to
clear. It does not, however, check for an L2T flush (L2TFLS) that may
still be in flight from a previous operation.
On pre-V3D 7.1 hardware, kicking off the TMU write-combiner flush while an
L2T flush is still pending can clobber bits in L2TCACTL and cause cache
inconsistencies.
Poll for L2TFLS to clear before writing L2TCACTL on V3D < 7.1, ensuring
any pending flush has completed before a new clean is issued.
Cc: stable@vger.kernel.org
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Link: https://patch.msgid.link/20260530-v3d-fix-rpi4-freezes-v1-1-c2c8307da6ce@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
CPPC v4 (ACPI 6.6, Section 8.4.6) adds two optional entries to the
_CPC package:
1. OSPM Nominal Performance (8.4.6.1.2.6): A write-only register that
lets OSPM inform the platform what it considers nominal performance.
The platform classifies performance above this level as boost and
below as throttle for its power/thermal decisions.
2. Resource Priority (8.4.6.1.2.7): A Package of Resource Priority
Register Descriptor sub-packages that allow OSPM to set relative
priority among processors for shared resources (boost, throttle,
L2/L3 cache, memory bandwidth). Parsing the full structure is not
yet supported; such entries are marked as unsupported.
Add v4 _CPC table parsing (25 entries) and update REG_OPTIONAL to
mark the two new registers as optional.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20260527194626.185286-2-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpumask_get() is used as a sysfs getter for the cpumask module
parameter. Use sysfs_emit() and cpumask_pr_args() to emit the mask.
This prepares for removing cpumap_print_to_pagebuf().
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260528183625.870813-16-ynorov@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpumask_show() is a sysfs show callback, so use sysfs_emit() and
cpumask_pr_args() to emit the mask in it.
This prepares for removing cpumap_print_to_pagebuf().
Signed-off-by: Yury Norov <ynorov@nvidia.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20260528183625.870813-15-ynorov@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Test veventq_depth to cover a memory exhaustion vulnerability.
Keep veventq_depth=2 for the existing callers.
Link: https://patch.msgid.link/r/acfa370fa4e89e4626f71954bad7ad2bd64cf63b.1779408671.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with
an upper bound at U32_MAX.
This leaves a vulnerability where userspace can allocate excessively large
queues to exhaust kernel memory reserves.
Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the
maximum number of entries in the SMMUv3 EVTQ (the largest use case today).
Fixes: e36ba5ab80 ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/8426cbaa5e8294472ec7f076ef427cc473be5985.1779408671.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The veventq memory allocation happens inside the spinlock. Given its depth
is decided by the user space, this leaves a vulnerability, where userspace
can allocate large queues to exhaust atomic memory reserves.
Move the allocation outside the spinlock and use GFP_NOWAIT, which can fail
fast under memory pressure without dipping into the GFP_ATOMIC reserves or
direct-reclaiming from the threaded IRQ handler. On allocation failure,
queue the lost_events_header (so userspace learns of the drop) and return
-ENOMEM so the caller learns of the kernel-side memory pressure.
This is intentionally distinct from the queue-overflow path, which also
queues the lost_events_header but returns 0: a full queue is an expected
userspace-pacing condition rather than a kernel error.
A subsequent change will cap the upper bound of the veventq_depth.
Fixes: e36ba5ab80 ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/5ff36b5d80f7f6299f851be532a5195c1d2f1dae.1779408671.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kzalloc_flex() computes the allocation size. With event_data typed as u64,
data_len is interpreted as a u64 element count. Yet, every caller and the
read path treat data_len as a byte count. The current code over-allocates
by sizeof(u64) and the __counted_by() annotation overstates the length by
the same factor.
Re-type event_data as u8. No functional change in user-visible behavior.
Fixes: e36ba5ab80 ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/f7665f839b9dce917d6bd394375a1cf56568d86b.1779408671.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit a5242d37c8 ("erofs: error out obviously illegal extents in
advance") changed the per-extent algorithm presence check from "is the
bit set" to "is the only bit set":
- !(sbi->available_compr_algs & (1 << map->m_algorithmformat))
+ (sbi->available_compr_algs ^ BIT(map->m_algorithmformat))
`available_compr_algs` is a bitmap of every compression algorithm
available in the image (z_erofs_parse_cfgs() iterates it with
for_each_set_bit()), so an image that enables more than one algorithm
has multiple bits set. XOR is zero only when the bitmap is exactly
BIT(map->m_algorithmformat); for any image with two or more algorithms
the test is non-zero for every extent and the read fails with
-EFSCORRUPTED ("inconsistent algorithmtype %u").
Reproducer (mkfs.erofs from erofs-utils 1.7.1):
$ mkdir src
$ yes A | head -c 100K > src/a
$ head -c 64K /dev/zero > src/b
$ mkfs.erofs -zlz4:deflate multi.erofs src
$ mount -t erofs -o loop multi.erofs /mnt
$ cat /mnt/a >/dev/null
cat: /mnt/a: Structure needs cleaning
$ dmesg | tail
erofs (device loop0): inconsistent algorithmtype 0 for nid 46
erofs (device loop0): read error -117 @ 0 of nid 46
The erofs on-disk format (Z_EROFS_COMPRESSION_MAX = 4 with LZ4, LZMA,
DEFLATE, ZSTD) and the kernel parser explicitly support
multi-algorithm images, and erofs-utils 1.7.1 generates them via the
"-z X:Y" syntax.
Restore the original per-bit presence check.
Fixes: a5242d37c8 ("erofs: error out obviously illegal extents in advance")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The Arm Ethos-U NPUs have a PMU with performance counters. The PMU h/w
supports up to 4 (U65) or 8 (U85) counters which can be programmed for
different events. There is also a dedicated cycle counter.
The ABI and implementation are copied from the V3D driver. The main
difference in the ABI is there is no query API for the event list. The
events differ between the U65 and U85, so the events lists are
maintained in userspace along with other differences between the U65 and
U85.
The cycle counter is always enabled when the PMU is enabled. When the
user requests N events, reading the counters will return the N events
plus the cycle counter.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260601173814.250071-1-tomeu@tomeuvizoso.net
---
v2:
- Use XArray instead of idr
- Rework locking to use per device spinlock to protect modifying active
perfmon. Based on pending V3D changes:
https://lore.kernel.org/all/20260508-v3d-perfmon-lifetime-v1-1-f5b5642c085f@igalia.com/
- Add missing perfmon puts in ethosu_ioctl_perfmon_set_global() and
ethosu_ioctl_perfmon_get_values() error paths.
- Fix reading number of counters on U85.
- Add defines NPU_REG_PMCCNTR_CFG
v3:
- Add explicit padding to drm_ethosu_perfmon_destroy
- Fix SPDX license expression
- Fix comment typos
- Convert perfmon lock from spinlock to mutex
- Simplify switch_perfmon condition check
- Remove unused ethosu_perfmon_init
- Add lockdep_assert_held to ethosu_perfmon_stop_locked
v4:
- Use drmm_mutex_init() for perfmon lock
- Add lockdep_assert_held() to ethosu_perfmon_start()
- Fix a few style issues reported by Maíra
idlecpus_show() is a sysfs show callback. Use sysfs_emit() and
cpumask_pr_args() to emit the mask.
This prepares for removing cpumap_print_to_pagebuf().
Signed-off-by: Yury Norov <ynorov@nvidia.com>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/20260528183625.870813-6-ynorov@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
