The code for initializing struct ublksrv_io_desc on I/O dispatch is
largely duplicated in 3 places. Commit 4d4a512a1f ("ublk: add PFN-
based buffer matching in I/O path") added support to ublk_setup_iod()
for matching request buffers against registered UBLK_F_SHMEM_ZC buffers,
but missed adding it to ublk_setup_iod_zoned() for zoned requests. Move
the duplicated logic to a new helper ublk_init_iod(). This way, zone
appends can also benefit from avoiding the data copy.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260520203654.1413640-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move ublk_req_build_flags() above its callers so it doesn't need to be
forward-declared.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260520203654.1413640-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_rq_has_data() currently uses bio_has_data(), which involves 2
indirections and several branches. Use blk_rq_has_data() instead to save
an indirection and NULL check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260513211846.1956810-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add blk_rq_has_data(), an analogue of bio_has_data() for struct request.
This skips one dereference relative to bio_has_data(rq->bio).
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260513211846.1956810-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function disk_update_zone_resources() may call
disk_free_zone_resources() in case of error, and following this,
blk_revalidate_disk_zones() will again calls disk_free_zone_resources() if
disk_update_zone_resources() failed. If a zone worker thread is being used
(which is the default for a rotational media zoned device),
disk_free_zone_resources() will try to stop the zone worker thread twice
because disk->zone_wplugs_worker is not reset to NULL when the worker
thread is stopped the first time.
In disk_free_zone_resources(), fix this by correctly clearing
disk->zone_wplugs_worker to NULL when the worker thread is stopped.
And while at it, since disk_free_zone_resources() is always called after a
failed call to disk_update_zone_resources(), remove the unnecessary call
to disk_free_zone_resources() in disk_update_zone_resources().
Fixes: 1365b6904f ("block: allow submitting all zone writes from a single context")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260522115622.588535-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Handle probe on hinted conditional branch instructions. BC.cond
instructions can be simulated in the same way as B.cond instructions,
so extend the decode mask for B.cond to cover BC.cond
- Flush the walk cache when unsharing PMD tables. Recent changes to
huge_pmd_unshare() introduced mmu_gather::unshared_tables but the
arm64 code was still treating the TLB flushing as only targeting leaf
entries (TLBI VALE1IS). Fix it by using non-leaf-only instructions
(TLBI VAE1IS) when tlb->unshared_tables is set
-----BEGIN PGP SIGNATURE-----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=koH2
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Handle probe on hinted conditional branch instructions.
BC.cond instructions can be simulated in the same way as B.cond
instructions, so extend the decode mask for B.cond to cover BC.cond
- Flush the walk cache when unsharing PMD tables. Recent changes to
huge_pmd_unshare() introduced mmu_gather::unshared_tables but the
arm64 code was still treating the TLB flushing as only targeting leaf
entries (TLBI VALE1IS).
Fix it by using non-leaf-only instructions (TLBI VAE1IS) when
tlb->unshared_tables is set
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Flush walk cache when unsharing PMD tables
arm64: probes: Handle probes on hinted conditional branch instructions
The current unwritten grammar for RTP rules is as follows:
rules = disjunction;
disjunction = conjunction, { "OR", conjunction };
conjunction = single_rule, { single_rule };
(* the AND operator is implicit *)
single_rule = ? GRAPHICS_VERSION(...), MEDIA_VERSION(...),
FUNC(...), etc ?
While rule_matches() currently works for the grammar above, it doesn't
easily resemble it. Let's replace it with an implementation that is
structured in a way to resemble the grammar.
Such a new implementation, although a bit more verbose, is arguably
easier to reason about and to adapt to any extension we do to the
grammer in the future.
Also take this opportunity to update the kernel-doc for XE_RTP_RULES()
to include the grammar, so that it is not unwritten anymore.
v2:
- Include the grammar in the code documentation. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-7-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The function rule_matches() short-circuits evaluation of the implicit
conjunctions (each substring of rules not containing OR) and the
explicit disjunctions (implicit conjunctions joined by OR). In other
words:
- in a conjunction, once a rule evaluate to false, we skip to the next
OR (if any) to evaluate the next conjunction;
- in a disjunction, once a conjunction evaluates to true, we return
true and skip evaluating all the remaining rules.
While this behavior results in a correct logical value, due to how the
"OR" short-circuiting is implemented, it has the side-effect that rule
set does not get fully "parsed", allowing incomplete constructs like
(rule1, OR) to evaluate to true when rule1 is true. We should treat
such constructs as invalid and treat them the same way we do for stuff
like (OR, rule1).
As such, update rule_matches() to "parse" the whole rule set, and that
while keeping the short-circuit aspect of evaluation. With that, we can
fix the FIXME test cases that cover that behavior.
v2:
- Do not change short-circuit *evaluation* behavior. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-6-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The current logic in rule_matches() mixes individual rule matching
with the logic necessary for handling OR operations. Let's simplify
rule_matches() to focus on the latter by extracting individual rule
matching into a separate function called rule_match_item().
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-5-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
With the current implementation, the RTP framework will cause parsing of
the rule set to be interrupted if one rule requires a context item (gt
or hwe) that is missing (i.e. when the value is NULL).
This is arguably a semantic error instead of a syntactic one, meaning
that RTP should not interrupt parsing the rules. With the current
behavior, we would miss detecting other errors that could appear in the
remaining rules and could also prevent valid rules joined by "OR" from
being evaluated.
Make sure that we do not stop parsing the rule set when detecting
missing context and let's add rtp_rules_test_cases to reflect that.
v2:
- Add "missing-context" in the test case names to indicate that those
are about rules that are missing the necessary context. (Matt)
- Rebase: treat the new match type XE_RTP_MATCH_PLATFORM_STEP in the
same way when the platform is missing step information.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com> # v1
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-4-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
While RTP processing evaluates true on the "yes-or" case (i.e. a
conjunction of rules that evaluate to true followed by an "OR" without
the right hand operand), it does not on the "or-yes" one.
Both cases are considered malformed and could be a result of someone
dropping checks deemed not necessary anymore and forgetting to drop the
superfluous "OR". Nevertheless, we should aim for consistency, and
having the "or-yes" case also evaluating to true while also causing a
warning seems reasonable. So let's do that.
The "or-yes" pattern being evaluated to false comes from the fact that
that we unconditionally short-circuit upon finding XE_RTP_MATCH_OR on
the outer loop. We should only do that if the preceding conjunction of
rules evaluated to true (meaning that rcount must be non-zero) and
continue the evaluation otherwise.
Do that and also add extra test cases to validate the short-circuiting
behavior.
Notice that some of the new test cases have a "FIXME" comment, which
comes from the fact that we are unable to detect syntax errors after the
short-circuit point. That is going to be fixed in a follow-up change.
Link: https://lore.kernel.org/intel-xe/871pfw4lo9.fsf@intel.com/
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Violet Monti <violet.monti@intel.com>
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-3-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The kunit test cases for the RTP framework are currently separated into
three groups:
(1) rtp_rules_cases:
Those to verify rule matching logic.
(2) rtp_to_sr_cases:
Those to verify generation of save/restore tables from RTP tables.
(3) rtp_cases
Those to verify processing of RTP tables without save/restore action
associated, which are used for OOB workarounds.
Today we have some cases in (2) and (3) that are actually meant to
verify rule matching logic. Now that we have (1), let's cleanup (2)
and (3) so that they become focused on their main objectives.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-2-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The kunit test cases for the RTP framework are currently separated into
those that validate xe_rtp_process_to_sr() and those that validate
xe_rtp_process(). In both of them, we also have mixed stuff to validate
rule matching functionality, which should rather be done in a separate
test case group.
Let's create such a group, specific for validating rule matching, and
also add an initial set of cases. In an upcoming change, we will do a
cleanup of the other groups by migrating those cases intended for rule
matching to this new group.
v2:
- s/no-yes-or-no-yes/no-yes-or-yes-no/ (Matt)
- Drop leftover include of <kunit/test.h>.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260522-rtp-rule-parser-v3-1-0c51039899f4@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
On the latest A8xx Adreno chips several of the bits in the UBWC-related
registers are now hardwired to 1. Currently the driver doesn't write
them because there is no side-effect. In the preparation for the
refactoring in the next patch, write '1' to those bits anyway.
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/726504/
Link: https://lore.kernel.org/r/20260520-ubwc-rework-v5-15-72f2749bc807@oss.qualcomm.com
Now that the highest_bank_bit value is retrieved from the running
system and the global config has been part of the tree for a couple
of releases, there is no reason to keep any hardcoded values inside
the GPU driver.
Get rid of them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/726488/
Link: https://lore.kernel.org/r/20260520-ubwc-rework-v5-4-72f2749bc807@oss.qualcomm.com
The UBWC registers in the MDSS region are not dependent on the UBWC
version (it is an invalid assumption we inherited from the vendor SDE
driver). Instead they are dependent only on the MDSS core revision.
Rework UBWC programming to follow MDSS revision and to use required (aka
encoder) UBWC version instead of the ubwc_dec_version.
Fixes: d68db6069a ("drm/msm/mdss: convert UBWC setup to use match data")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/723384/
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-1-c19593d20c1d@oss.qualcomm.com
- Fix PAI NNPA mismatch between counting and recording, where
sampling reports twice the value
- Fix loss of PAI counter increments during recording on systems
with many CPUs under heavy load, while counting is not affected
- On some supported machines, CHSC cannot access memory outside
the DMA zone, causing CHSC command failures. Restore GFP_DMA
flag when allocating memory for CHSC control blocks
- Align the numbering scheme for higher-level topology structures
like socket, book, drawer with other hardware identifiers e.g.
in sysfs, procfs and tools like lscpu
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCag8nxxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OulAQC/lQlKztFCEUad/yCXhfZnJbwz
zqUrq/5+JyKm8w1kPgEAq1cYMpzoUdcQ1D8N889SLe6o5aUPHO1fBu3VC6V0cg0=
=OS/x
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PAI NNPA mismatch between counting and recording, where sampling
reports twice the value
- Fix loss of PAI counter increments during recording on systems with
many CPUs under heavy load, while counting is not affected
- On some supported machines, CHSC cannot access memory outside the DMA
zone, causing CHSC command failures. Restore GFP_DMA flag when
allocating memory for CHSC control blocks
- Align the numbering scheme for higher-level topology structures like
socket, book, drawer with other hardware identifiers e.g. in sysfs,
procfs and tools like lscpu
* tag 's390-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: Use zero-based numbering for containing entities
s390/cio: Restore GFP_DMA for CHSC allocation
s390/pai: Fix missing PAI counter increments under heavy load
s390/pai: Disable duplicate read of kernel PAI counter value
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmoQJvUbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJELvgsHXSRYiavTcH/iKK1G+ygWOCqKrlZxir
/Ga7vPPQSXgiZEtEQ9ZIC/1UQeBp/eQc4uCzgy/aAMqksFjdwsFF/qs6mUr1ffHB
ne9RBk40zoP6KQfKkP8GW22ERmDOLnJ1t+QiCibrre8roM7vguDx0Sr5VXGoDmU5
p9mtomLzxJkuDV1gY7LGsT26Es+3PIpma8DTJwlhsUw2igAsp9XnfXJEjBu4eEXP
vfGkxK+go5+u4iH5/qKKw6MpfmV7z+O5WJsHaGaKyp8chc6lMSkqtFe1g15h6j6D
bL4D6jvmUuwTGsDVaufUnnKdM64+BtcCYJAkgzfKHhge8KG3eBlmsiLkK4uvNRo4
8NI=
=E0Wr
-----END PGP SIGNATURE-----
Merge tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix for a missing cpus_read_lock in one of the cpu sheaves
flushing paths (Qing Wang)
* tag 'slab-for-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: hold cpus_read_lock around flush_rcu_sheaves_on_cache()
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one.
Fixes: 39efa3ef3a ("signal: Use GROUP_STOP_PENDING to stop once for a single group stop")
Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot
Reported-by: syzbot+b109633ea805cac54a61@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b109633ea805cac54a61
Link: https://syzkaller.appspot.com/ai_job?id=d70208cc-862b-4fe3-bf02-3031e10cd0b3
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Link: https://patch.msgid.link/20260521142240.2973022-1-nogikh@google.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the
FUSE daemon to actively write/read pagecache contents.
For directories with FOPEN_CACHE_DIR, the pagecache is used as
kernel-internal cache storage, and userspace is not supposed to have
direct access to this cache - in particular, fuse_parse_cache() will hit
WARN_ON() if the cache contains bogus data.
Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than
regular files with -EINVAL.
Fixes: 5d7bc7e868 ("fuse: allow using readdir cache")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260519-fuse-dir-pagecache-v2-1-5428fa48e175@google.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios
can contain uninitialized data.
Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already
in the page cache and not wait for data from the FUSE daemon, treat
!uptodate folios as if they weren't present.
This only has security impact on systems that don't enable automatic
zero-initialization of all page allocations via
CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.
Cc: stable@kernel.org
Fixes: 2d45ba381a ("fuse: add retrieve request")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260519-fuse-retrieve-uptodate-v1-1-a7a1912a37f9@google.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Two minor updates for the DMA-mapping code, mainly fixing some rare
corner cases (Petr Tesarik, Jianpeng Chang).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCag/+/AAKCRCJp1EFxbsS
RC9gAP4qM5M9S2WrUJBCoeQrhUrQajNBXN1HV3N+hncHcgkCUwEA2nJq1oETLONH
UI4HDrtEBIUEXQgPWEmCj7krN5IYOw0=
=I4my
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two minor updates for the DMA-mapping code, mainly fixing some rare
corner cases (Petr Tesarik, Jianpeng Chang)"
* tag 'dma-mapping-7.1-2026-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: move dma_map_resource() sanity check into debug code
dma-direct: fix use of max_pfn
- Avoid NULL return from hist_field_name()
The function hist_field_name() is directly passed to a strcat()
which does not handle "NULL" characters. Return a zero length
string when size is greater than the limit.
This is used only to output already created histograms and no
field currently is greater than the limit. But it should still
not return NULL.
- Do not call map->ops->elt_free() on allocation failure
When elt_alloc() fails, it should not call the map->ops->elt_free()
function if it exists, as that function may not be able to handle
the free on allocation failures. The ->elt_free() should only be
called when elt_alloc() succeeds.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCag+BVhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qor+AP94efFkLGAxuv7YIZsPrrkz+dh0XI/N
5asQe9sTnrfGiAD8DhE77S0DkZpMO+OE0J6mqTWmOVqds4RcuCWABxx12Ag=
=F67c
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Avoid NULL return from hist_field_name()
The function hist_field_name() is directly passed to a strcat() which
does not handle "NULL" characters. Return a zero length string when
size is greater than the limit.
This is used only to output already created histograms and no field
currently is greater than the limit. But it should still not return
NULL.
- Do not call map->ops->elt_free() on allocation failure
When elt_alloc() fails, it should not call the map->ops->elt_free()
function if it exists, as that function may not be able to handle the
free on allocation failures. The ->elt_free() should only be called
when elt_alloc() succeeds.
* tag 'trace-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
tracing: Avoid NULL return from hist_field_name() on truncation
The newly added driver requires the LED classdev support
and causes a link failure when that is disabled:
x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe':
bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext'
Fixes: dc1ec4fa86 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260515112458.34378-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
