There is no good reason to have wBytesPerInterval < wMaxPacketSize -
either one is too low or the other too high, and we may want to warn
about such descriptors. Start with cleaning up our own root hubs.
USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of
SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize
from its former value of 4, which was derived from USB 2.0 spec and
the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2
10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports.
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently, a few races have been discovered in the GEM LRU logic, all
of them caused by the fact the LRU lock is accessed through
gem->lru->lock, and that very same lock also protects changes to
gem->lru, leading to situations where gem->lru needs to first be
accessed without the lock held, to then get the lru to access the lock
through and finally take the lock and do the expected operation.
Currently, the only driver making use of this API (MSM) declares a
device-wide lock, and the user we're about to add (panthor) will
do the same. There's no evidence that we will ever have a driver
that wants different pools of LRUs protected by different locks under
the same drm_device. So we're better off moving this lock to drm_device
and always locking it through obj->dev->gem_lru_mutex, or directly
through dev->gem_lru_mutex.
If anyone ever needs more fine-grained locking, this can be revisited
to pass some drm_gem_lru_pool object representing the pool of LRUs
under a specific lock, but for now, the per-device lock seems to be
enough.
Fixes: e7c2af13f8 ("drm/gem: Add LRU/shrinker helper")
Reported-by: Chia-I Wu <olvaffe@gmail.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/86
Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20260518-panthor-shrinker-fixes-v4-1-1920234470d5@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL.
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026051405-posture-shrill-7884@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values.
Fixes: 93c473948c ("usb: gadget: add WebUSB landing page support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeremy Erazo <mendozayt13@gmail.com>
Link: https://patch.msgid.link/20260512160530.352318-1-mendozayt13@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the error code on these two error paths. The existing code returns
success.
Fixes: 77ed2f4538 ("usb: typec: tipd: Use read_power_status function in probe")
Fixes: 04041fd7d6 ("usb: typec: tipd: Read data status in probe and cache its value")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/agL9o7wUK1dOVBTy@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ovl_iterate_merged() stores PTR_ERR(cache) in err before checking
IS_ERR(cache). On success err holds the truncated cache pointer and
can be returned as a bogus non-zero error.
The syzbot reproducer reaches this through overlay-on-overlay readdir:
getdents64
iterate_dir(outer overlay file)
ovl_iterate_merged()
ovl_cache_get()
ovl_dir_read_merged()
ovl_dir_read()
iterate_dir(inner overlay file)
ovl_iterate_merged()
Only compute PTR_ERR(cache) on the error path.
Fixes: d25e4b739f ("ovl: refactor ovl_iterate() and port to cred guard")
Reported-by: syzbot+a16fb0cce329a320661c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a16fb0cce329a320661c
Cc: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Link: https://patch.msgid.link/20260514144258.3068715-1-nirmoyd@nvidia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add an MP5998 power monitor used to monitor the power consumption
of the Paddle_P12V_HSC rail on the Yosemite5 paddle board.
[arj: Remove changelog from commit message]
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>
Link: https://patch.msgid.link/20260331120734.39260-1-Daniel-Hsu@quantatw.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
dm_poll_bio() is the ->poll_bio() callback for a stacked dm device.
The caller only knows about the dm queue, so it may decide to do a
spinning poll if it thinks a single queue is being polled. Passing those
flags unchanged to the mapped clone lets blk_mq_poll() spin on a target
queue from inside dm_poll_bio().
With io_uring IOPOLL on a dm-stripe target this can keep a task in
dm_poll_bio() -> bio_poll() -> blk_mq_poll()
long enough to trigger an RCU CPU stall, before io_uring gets back to
io_iopoll_check() and its need_resched() check.
Keep dm's ->poll_bio() bounded by forcing one-shot polling for target
bios. The caller can invoke dm_poll_bio() again if it wants to keep
polling, and it also gets a chance to reap completions or reschedule
between passes.
Fixes: f22ecf9c14 ("blk-mq: delete task running check in blk_hctx_poll()")
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When we send a message to a device that has no table, the return code was
not set. The code would return "2", which is not considered a valid return value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
This adds the admin-guide documentation for dm-inlinecrypt.
dm-inlinecrypt.rst is the guide to using dm-inlinecrypt.
Signed-off-by: Linlin Zhang <linlin.zhang@oss.qualcomm.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
As described in commit 2bc0576925 ("block: don't make REQ_POLLED imply
REQ_NOWAIT"), which fixed the same issue for the block device node, there
are valid cases to poll for I/O completion without REQ_NOWAIT.
Additionally, sing REQ_NOWAIT for file system writes is currently not
supported as file systems writes are not idempotent and would need a
retry of just the bio and not the entire operation to be fully supported.
Switch iomap to set REQ_POLLED and remove the now unused bio_set_polled
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260518062917.506483-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The current SysFS flow first enables the links and sink, then rolls back
to disable them if the source fails to enable. This failure can occur if
the associated CPU is offline, which causes the SMP call to fail.
Validate whether the associated CPU is online for a per-CPU tracer.
If the CPU is offline, return -ENODEV and bail out.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-28-f88c4a3ecfe9@arm.com
This commit moves CPU hotplug callbacks from ETMv4 driver to core layer.
The motivation is the core layer can control all components on an
activated path rather but not only managing tracer in ETMv4 driver.
The perf event layer will disable CoreSight PMU event 'cs_etm' when
hotplug off a CPU. That means a perf mode will be always converted to
disabled mode in CPU hotplug. Arm CoreSight CPU hotplug callbacks only
need to handle the Sysfs mode and ignore the perf mode.
Add a 'mode' argument to coresight_pm_get_active_path() so it only
returns active paths for the relevant mode. Define the enum with bit
flags so it is safe for bitwise operations.
Change CPUHP_AP_ARM_CORESIGHT_STARTING to CPUHP_AP_ARM_CORESIGHT_ONLINE
so that the CPU hotplug callback runs in the online state and thread
context, allowing coresight_disable_sysfs() to be called directly to
disable the path.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-27-f88c4a3ecfe9@arm.com
Except for software sources (e.g. STM), other sources treat multiple
enables as equivalent to a single enable. The device mode already
tracks the binary state, so it is redundant to operate refcount.
Introduce a helper coresight_is_software_source() for check software
source. Refactor to maintain the refcount only for software sources.
This simplifies future CPU PM handling without refcount logic.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-26-f88c4a3ecfe9@arm.com
Add interrupt-parent and interrupts properties to the PDB PCA9555
nodes in the anacapa DTS.
[arj: Tweak commit subject capitalisation]
Signed-off-by: Rex Fu <Rex.Fu@amd.com>
Link: https://patch.msgid.link/20260417-anacapa-pca9555-irq-v1-1-9a6d28b1b656@amd.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Instead of projecting using pointer to a field project the full slot. This
further shifts the code generation from the initializer site to the struct
definition site, which means less code is generated overall.
It also makes the safety comment easier to justify, as now the projection
is done by the `#[pin_data]` macro which has full visibility of pinnedness
of fields.
The field alignment could also be checked on the `#[pin_data]` side;
however, since `init!()` macro works for other type of structs, we cannot
remove the alignment check from `init!`/`pin_init!` side anyway, so I opted
to still keep the alignment check in init.rs.
Signed-off-by: Gary Guo <gary@garyguo.net>
By projecting slots, the `pin_init!` and `init!` code path can be more
unified. This also reduces the amount of macro-generated code and shifts
them to the shared infrastructure.
Signed-off-by: Gary Guo <gary@garyguo.net>
The `InitData` and `PinData` traits do not need to exist, the inference
helpers could be inherent methods instead.
There is no risk for calling the wrong methods even when user defines it,
as inherent methods take priority over trait methods.
With this change, it unlocks the possibility of attaching additional bounds
to the method per type, which is not possible for trait methods.
Signed-off-by: Gary Guo <gary@garyguo.net>
Instead of projecting the created reference, simply create drop guards with
different marker types and have the `let_binding()` method of guards of
different marker produce different type instead.
This allows more flexible lifetime as this is now controlled by the guard.
This will be needed when implementing self-referential fields.
Signed-off-by: Gary Guo <gary@garyguo.net>
`InitializerKind::Code` is a special case where it does not initialize a
field, and thus generate no guard and accessors. Handle it earlier and make
the rest of the code more linear.
Signed-off-by: Gary Guo <gary@garyguo.net>
The ACS specification does not allow a non-NCQ command to be issued while
an NCQ command is outstanding.
Commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced a feature where a deferred non-NCQ command gets issued from a
workqueue. The design stores a single non-NCQ command per port.
However, when using Port Multipliers (PMPs), specifically PMPs that
support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed
on the same port, just not for the same link, see e.g. ata_std_qc_defer()
which is, and always has operated on a per-link basis.
Therefore, move the deferred_qc from struct ata_port to struct ata_link.
This way, when using a PMP with FBS, we will not needlessly defer commands
to all other links, just because one link issued a non-NCQ command while
having an NCQ command outstanding. Only commands for that specific link
will be deferred. This is in line with how PMPs with FBS worked before
commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation").
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you
can only issue commands to one link at a time. For PMPs with CBS, there is
already code to handle commands being sent to different links in
sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes
use of ap->excl_link.
A user on the list reported that commit 0ea84089db ("ata: libata-scsi:
avoid Non-NCQ command starvation") broke PMPs with CBS. The commit
introduced code that stores a deferred qc in ap->deferred_qc, to later be
issued via a workqueue. It turns out that this change is incompatible with
the existing ap->excl_link handling used by PMPs with CBS.
Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return
ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via
workqueue is not used for this return value.
This way, PMPs with CBS will work once again. Note that the starvation
referenced in commit 0ea84089db ("ata: libata-scsi: avoid Non-NCQ
command starvation") can only happen on libsas ports, and libsas does not
support Port Multipliers, thus there is no harm of reverting back to the
previous way of deferring commands for PMPs with CBS.
Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal
drive or a PMP with FBS) will continue using the deferred workqueue, since
it does result in lower completion latencies for non-NCQ commands, even
though the workqueue is not strictly needed to avoid starvation for
non-libsas ports.
If we want to modify the scope of the workqueue issuing to also handle
PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ
commands in ap->deferred_qc, while also removing the existing PMP CBS
handling using ap->excl_link, such that we don't duplicate features.
While at it, also add a comment explaining how the ap->excl_link mechanism
works.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reported-by: Tommy Kelly <linux@tkel.ly>
Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 18226ba521 ("drm/syncobj: reject invalid flags in
drm_syncobj_find_fence") forgot to take into account the fact that
drm_syncobj_find() takes a reference to syncobj and returns early
without dropping the reference, leading to memory leaks.
Fixes: 18226ba521 ("drm/syncobj: reject invalid flags in drm_syncobj_find_fence")
Reported by: Sam Spencer <sam.spencer@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Erik Kurzinger <ekurzinger@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/all/20260507144425.2488057-1-liviu.dudau@arm.com
The deferred QC feature was meant to handle mixed NCQ and non-NCQ commands,
i.e. for return value ATA_DEFER_LINK.
ATA_DEFER_PORT is returned by PATA drivers, but also certain SATA drivers
like sata_mv and sata_sil24 that uses ap->excl_link to workaround hardware
bugs in these HBAs. Regardless of the reason, using the deferred QC feature
for ATA_DEFER_PORT is always wrong, and will break the ap->excl_link usage
of the SATA drivers that rely on that feature.
Modify ata_scsi_qc_issue() to only use the deferred QC feature when mixing
NCQ and non-NCQ commands, i.e. ATA_DEFER_LINK.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Improve readability of ata_scsi_qc_issue().
No functional changes.
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 64a6b57749 ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/aBDSTxALaOc-PD7X@gaggiata.pivistrello.it/
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Fixes: 64a6b57749 ("regulator: tps65219: Remove debugging helper function")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20260518083113.2063368-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TRBE context can be lost when a CPU enters low power states. If a trace
source is restored while TRBE is not, tracing may run without an active
sink, which can lead to hangs on some devices (e.g., Pixel 9).
The save and restore flows are described in the section K5.5 "Context
switching" of Arm ARM (ARM DDI 0487 L.a). This commit adds save and
restore callbacks with following the software usages defined in the
architecture manual.
During the restore flow, since TRBLIMITR_EL1.E resets to 0 on a warm
reset, the trace buffer unit is disabled when idle resume, it is safe to
restore base/pointer/status registers first and program TRBLIMITR_EL1
last.
Signed-off-by: Yabin Cui <yabinc@google.com>
Co-developed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-25-f88c4a3ecfe9@arm.com
The thermistor device nodes were added before the vbus regulator and
reserved memory nodes, when they should be after them, based on
alphabetical order of the device node _name_.
Move them to the correct position. No functional changes intended.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The names currently given to the EC controlled regulators do not match
what is used in the hardware design.
Fix the names and the labels.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
GPIO lines 59 and 61 are named BT_KILL_1V8_L and WIFI_KILL_1V8_L in the
hardware design. Add them to the gpio-line-names property to make the
names available to users and developers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
For JEDEC compatible SPI NOR chips, there should be a single generic
"jedec,spi-nor" compatible.
Drop the model-specific compatible from the flash node.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset()
calls gpiod_set_value() on it. However, the GPIO descriptor is never
acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout
the driver lifetime.
gpiod_set_value() silently returns when passed a NULL descriptor, so
the hardware reset sequence in it66121_hw_reset() is a no-op. This
leaves the chip in an undefined state at probe time, which can prevent
it from responding on the I2C bus.
The DT binding marks reset-gpios as a required property, so all
compliant device trees provide this GPIO. Add the missing
devm_gpiod_get() call after enabling power supplies and before the
hardware reset, so the chip is properly reset with power applied.
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Julien Chauveau <chauveau.julien@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Johan Hovold <johan@kernel.org> says:
In preparation for fixing the SPI controller API so that it no longer
drops a reference when deregistering (non-managed) controllers (cf.
[1]), this series converts drivers using managed registration to also
use managed allocation.
Included is also a related cleanup of a lp8841-rtc.
This leaves us with 18 drivers using non-managed allocation, which is
few enough to be able to fix the API in tree-wide change.
Johan
[1] https://lore.kernel.org/lkml/20260325145319.1132072-1-johan@kernel.org/
Link: https://patch.msgid.link/20260511150408.796155-1-johan@kernel.org
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-9-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-8-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-7-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to device managed controller allocation for consistency and to
simplify error handling.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260511150408.796155-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike system level sinks, per-CPU sinks may lose power during CPU idle
states. Currently, this applies specifically to TRBE. This commit
invokes save and restore callbacks for the sink in the CPU PM notifier.
If the sink provides PM callbacks but the source does not, this is
unsafe because the sink cannot be disabled safely unless the source
can also be controlled, so veto low power entry to avoid lockups.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-24-f88c4a3ecfe9@arm.com
Extend the CPU PM flow to control the path: disable from source up to
the node before the sink, then re-enable the same range on restore.
To avoid latency, control it up to the node before the sink.
Track per-CPU PM restore failures using percpu_pm_failed. Once a CPU
hits a restore failure, set the percpu_pm_failed and return NOTIFY_BAD
on subsequent notifications to avoid repeating half-completed
transitions.
Setting percpu_pm_failed permanently blocks CPU PM on that CPU. Such
failures are typically seen during development; disabling PM operations
simplifies the implementation, and a warning highlights the issue.
Clear this flag when the source device is unregistered.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-23-f88c4a3ecfe9@arm.com
Since the path pointer is stored in the source's structure, retrieve it
directly when disabling the path.
As a result, the global variables used for caching path pointers are no
longer needed. Remove them to simplify the code.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-22-f88c4a3ecfe9@arm.com
Set the path pointer on the target CPU during ETM enable and disable.
This ensures the device mode and path pointer are updated together and
observed atomically by the CPU PM notifier.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-21-f88c4a3ecfe9@arm.com
Set the path pointer on the target CPU during ETM enable and disable.
This ensures the device mode and path pointer are updated together and
observed atomically by the CPU PM notifier.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-20-f88c4a3ecfe9@arm.com
