In mmio_print_mark(), a raw C cast (struct print_entry *)entry is used to
obtain the print_entry pointer.
Use the standard trace_assign_type() macro instead, matching the usage in
mmio_print_rw() and mmio_print_map().
Link: https://patch.msgid.link/178524301013.56416.9116249028160618790.stgit@devnote2
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Simon Schippers says:
====================
tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops
This patch series deals with tun/tap & vhost-net which drop incoming
SKBs whenever their internal ptr_ring buffer is full. Instead, with this
patch series, the associated netdev queue is stopped, but only when the
new IFF_BACKPRESSURE flag is set and a qdisc is attached. Without the
flag, or if no qdisc is present, the existing behavior is preserved. The
XDP transmit path is not affected. This patch series touches tun/tap and
vhost-net, as they share common logic and must be updated together.
Modifying only one of them would break the other.
By applying proper backpressure, this change allows the connected qdisc to
operate correctly, as reported in [1], and significantly improves
performance in real-world scenarios, as demonstrated in our paper [2]. For
example, we observed a 36% TCP throughput improvement for an OpenVPN
connection between Germany and the USA.
The previous version of this work was applied and then reverted in 7.2,
because the backpressure was unconditional: it caused a significant
throughput drop in an IPv6 multicast testcase with multiple iperf3 TCP
threads sending on Brett Sheffield's librecast testbed [3]. This version
therefore makes the behavior opt-in via IFF_BACKPRESSURE from the very
first patch, so that a tun/tap device which does not set the flag behaves
exactly as before.
The series is ordered so that no patch changes how packets are handled
unless the flag is set:
- Patch 1 adds the flag only. It has no effect yet: TUNSETIFF silently
masks it off, as it does for any flag outside TUN_FEATURES, until
patch 5 adds it there.
- Patches 2 and 3 add the consumer side, which wakes a stopped netdev
queue. __tun_wake_queue() returns early unless IFF_BACKPRESSURE is set,
and no queue is stopped at this point anyway.
- Patch 4 is a pure ptr_ring refactor required by patch 5.
- Patch 5 adds the queue stopping, gated on IFF_BACKPRESSURE, together
with the wake needed when the flag is cleared again, and only there is
the flag added to TUN_FEATURES.
That way no intermediate commit changes the behavior of an existing
tun/tap user beyond the added checks, and bisecting inside the series can
not hit the regression that led to the revert.
[1] https://unix.stackexchange.com/questions/762935/traffic-shaping-ineffective-on-tun-device
[2] https://cni.etit.tu-dortmund.de/storages/cni-etit/r/Research/Publications/2025/Gebauer_2025_VTCFall/Gebauer_VTCFall2025_AuthorsVersion.pdf
[3] https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
====================
Link: https://patch.msgid.link/20260803183641.96882-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit prevents tail-drop when IFF_BACKPRESSURE is set, a qdisc is
present and the ptr_ring becomes full. Once the ring reaches capacity
after a produce attempt, the netdev queue is stopped instead of dropping
subsequent packets. Without the flag, or if no qdisc is present, the
previous tail-drop behavior is preserved.
IFF_BACKPRESSURE is added to TUN_FEATURES here and not in the patch that
defines it, so that TUNSETIFF honours the flag only once the
implementation behind it is complete.
The unconditional version of this behavior was reverted because it caused
a significant throughput drop in an IPv6 multicast testcase on Brett
Sheffield's librecast testbed [1]: with 8 iperf3 TCP threads sending, the
throughput dropped from 13.5 Gbit/s to 9.13 Gbit/s. This is why the queue
stopping is now gated on IFF_BACKPRESSURE.
If producing an entry fails anyway due to a race, tun_net_xmit() drops
the packet. Such rare races are expected because LLTX is enabled and the
transmit path operates without the usual locking.
The queue state is only touched while the device is running. The stop
itself would be harmless during teardown, as tun_net_close() sets the
same bit, but the re-check below it wakes the queue again and must not
clear that stop.
A later TUNSETIFF can clear the flag again while the device has at most
one queue. Past that point tun_set_iff() returns before it writes
tun->flags, which is how it already treats every other TUN_FEATURES bit.
For the case where the flag does change, tun_set_iff() calls
tun_force_wake_queue() for the attached tfiles, so that no queue stays
stopped without a consumer that would wake it.
The __tun_wake_queue() function of the consumer races with the producer
for waking/stopping the netdev queue, which could result in a stalled
queue. Therefore, an smp_mb__after_atomic() is introduced that pairs
with the smp_mb() of the consumer. It follows the principle of store
buffering described in tools/memory-model/Documentation/recipes.txt:
- The producer in tun_net_xmit() first sets __QUEUE_STATE_DRV_XOFF,
followed by an smp_mb__after_atomic() (= smp_mb()), and then reads the
ring with __ptr_ring_check_produce().
- The consumer in __tun_wake_queue() first writes zero to the ring in
__ptr_ring_consume(), followed by an smp_mb(), and then reads the queue
status with netif_tx_queue_stopped().
=> Following the aforementioned principle, it is impossible for the
producer to see a full ring (and therefore not wake the queue on the
re-check) while the consumer simultaneously fails to see a stopped
queue (and therefore also does not wake it).
tun_net_xmit() holds only the producer_lock and can not reset cons_cnt,
which the consumer_lock protects, so the wake on the re-check leaves
stale credit behind. That is accepted as best-effort, the re-check rarely
succeeds and the next drain corrects the count.
The documentation in tuntap.rst is updated accordingly.
Benchmarks:
My own benchmarks show a slight regression in raw transmission performance
when using two sending threads. Packet loss also occurs only in the
two-thread sending case; no packet loss was observed with a single
sending thread.
Test setup:
AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU threads;
Average over 50 runs @ 100,000,000 packets. SRSO and spectre v2
mitigations disabled.
Note for tap+vhost-net:
XDP drop program active in VM -> ~2.5x faster; slower for tap due to
more syscalls (high utilization of entry_SYSRETQ_unsafe_stack in perf)
+--------------------------+--------------+----------------+----------+
| 1 thread | Stock | Patched with | diff |
| sending | | fq_codel qdisc | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 1.132 Mpps | 1.123 Mpps | -0.8% |
| +-------------+--------------+----------------+----------+
| | Lost/s | 3.765 Mpps | 0 pps | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 3.857 Mpps | 3.901 Mpps | +1.1% |
| +-------------+--------------+----------------+----------+
| +vhost-net | Lost/s | 0.802 Mpps | 0 pps | |
+------------+-------------+--------------+----------------+----------+
+--------------------------+--------------+----------------+----------+
| 2 threads | Stock | Patched with | diff |
| sending | | fq_codel qdisc | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 1.115 Mpps | 1.081 Mpps | -3.0% |
| +-------------+--------------+----------------+----------+
| | Lost/s | 8.490 Mpps | 391 pps | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 3.664 Mpps | 3.555 Mpps | -3.0% |
| +-------------+--------------+----------------+----------+
| +vhost-net | Lost/s | 5.330 Mpps | 938 pps | |
+------------+-------------+--------------+----------------+----------+
[1] https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
Link: https://patch.msgid.link/20260803183641.96882-6-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves the check for available free space for a new entry into
a separate function. Existing callers that only check for a non-zero
return value are unaffected. __ptr_ring_produce() now returns -EINVAL
for a zero-size ring and -ENOSPC when full, whereas before both cases
returned -ENOSPC. The new helper allows callers to determine in advance
whether a single subsequent __ptr_ring_produce() call will succeed. This
information can, for example, be used to temporarily stop producing until
__ptr_ring_check_produce() indicates that space is available again.
The return values are documented above the helper, as a caller that waits
for space must distinguish the transient -ENOSPC from the permanent
-EINVAL.
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20260803183641.96882-5-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tun_wake_queue() to tun.c and export it for use by vhost-net. The
function validates that the file belongs to a device implemented by
drivers/net/tun.c, in IFF_TUN as well as in IFF_TAP mode, and that the
tfile exists, dereferences the tun_struct under RCU, and delegates to
__tun_wake_queue().
vhost_net_buf_produce() now calls tun_wake_queue() after a successful
batched consume of the ring to allow the netdev subqueue to be woken up.
The point is to allow the queue to be stopped when it gets full, which is
required for traffic shaping, implemented by the following
"stop tail-drop when IFF_BACKPRESSURE is set".
As __tun_wake_queue() returns early unless IFF_BACKPRESSURE is set, a
tun/tap device that does not opt in only pays for the added check.
macvtap and ipvtap rings, which get_tap_ptr_ring() accepts too, are
unaffected: their producer is the tap_handle_frame() rx_handler and not
ndo_start_xmit, so stopping a netdev TX queue would not hold it back.
drivers/net/tap.c has no netdev_ops of its own either. No
tap_wake_queue() is needed.
cons_cnt and the wake decision are best-effort and are not reverted by
ptr_ring_unconsume(), so vhost_net_buf_unproduce() can leave the subqueue
woken over a full ring. The producer re-stops it on the next packet, and
that path only runs from vhost_net_stop_vq() and vhost_net_set_backend(),
when the consumer is going away, so a stopped queue is the correct end
state rather than a stall.
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20260803183641.96882-4-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce tun_ring_consume() that wraps ptr_ring_consume() and calls
__tun_wake_queue(). The latter wakes the stopped netdev subqueue once
half of the ring capacity has been consumed, tracked via the new
cons_cnt field in tun_file. As a safety net, the queue is also woken on
the last consumed entry if it leaves the ring empty. The point is to
allow the queue to be stopped when it gets full, which is required for
traffic shaping, implemented by the following "stop tail-drop when
IFF_BACKPRESSURE is set".
__tun_wake_queue() returns early unless IFF_BACKPRESSURE is set, so for a
tun/tap device that does not opt in only the added check on the consume
path remains.
Every site that clears __QUEUE_STATE_DRV_XOFF now checks netif_running()
under a ring lock that tun_net_close() takes, so that none of them undoes
its stop. The core sets it before it calls ndo_open() and clears it
before it calls ndo_stop(), so it is false for exactly as long as the
device is down. IFF_UP would not do, it is only cleared after ndo_stop()
returns.
Some implementation details:
- tun_ring_recv() replaces ptr_ring_consume() with tun_ring_consume()
to properly wake the queue.
- __tun_wake_queue() returns early for a device that is not running, so a
stop from tun_net_close() is not mistaken for backpressure, and it only
wakes if the tfile still owns its slot in tun->tfiles[]. A detached
tfile keeps its queue_index, which __tun_detach() may already have
handed to the tfile that took over the slot.
- lockdep_assert_held() enforces the documented consumer_lock
precondition of __tun_wake_queue().
- __tun_detach() locks the tx_ring.consumer_lock to avoid races with
the consumer on the queue_index, and that of tfile across the hand-over
of the slot, which makes the ownership check above exact.
- The ptr_ring_consume() call in tun_queue_purge() is not replaced with
tun_ring_consume(). Instead __tun_detach() wakes the netdev queue for
the ntfile taking it over, to avoid a possible stall. The queue is only
woken if the ring of the ntfile is empty, as otherwise the consumer
wakes it after consuming the remaining entries. This does not matter
for tun_detach_all(), as it is called during device teardown and no
tfile takes over any queue.
- That wake sits after synchronize_net() and tun_queue_purge(), so it can
not be undone by a concurrent tun_net_xmit() or __tun_wake_queue().
- Ensure detached queues are woken on re-attach by calling the new
tun_force_wake_queue() helper from tun_attach(), and reuse it across
the existing wake paths. Unlike __tun_wake_queue() it ignores
IFF_BACKPRESSURE, so a queue can not stay stopped after the flag is
cleared. It does honour netif_running(), but it always clears cons_cnt,
so no old count is left over when the queue is stopped again.
- tun_net_close() takes and releases both ring locks of every tfile
before netif_tx_stop_all_queues(), so that its stop is the last write
to __QUEUE_STATE_DRV_XOFF.
- The aforementioned upcoming patch explains the pairing of the smp_mb()
of __tun_wake_queue().
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20260803183641.96882-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the IFF_BACKPRESSURE flag to the UAPI header and to its tools/ copy.
The flag has no effect yet, it is the opt-in switch for the qdisc
backpressure logic added by the following patches.
It is added to TUN_FEATURES only in the last patch of the series, once the
implementation is complete. Until then TUNSETIFF silently masks it off, as
it does for any flag outside TUN_FEATURES.
Keeping the flag and its users in separate patches would either leave a
window where backpressure is unconditional, or make the opt-in a later
add-on. Adding the flag first lets every following patch be a no-op
unless it is set.
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Link: https://patch.msgid.link/20260803183641.96882-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tc_new_tfilter() the create branch sets tp_created = 1 before calling
tcf_chain_tp_insert_unique(). When the caller loses the race (another
request inserted a proto at the same chain/prio first), insert_unique()
destroys the caller's own tp_new and returns the winner's proto with an
extra reference. tp_created was never cleared, so the loser's errout
path treated the winner's live proto as its own and called
tcf_chain_tp_delete_empty() on it, silently unlinking an active
classifier that the winning request already advertised via
RTM_NEWTFILTER.
Track the outcome of the insert step in a single tri-state variable so
each errout path reacts correctly:
- TP_NOT_CREATED: no proto created; pursue the old path.
- TP_CREATED: proto inserted successfully; same code path as before.
- TP_NOT_OWNED: New - lost the insert race; tp is another request's proto
(chain ref already released by tp_new's destroy)
Both errout reactions are single expressions derived from the state.
This fix is motivated by the Sashiko's automated review of Patch
(net/sched: cls_api: Always acquire rtnl_lock when destroying locked
classifiers) [1][2]. The review identified the silent-unlink behaviour of
an adopted proto's teardown when a request loses the
tcf_chain_tp_insert_unique() race.
[1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
[2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
Fixes: 8b64678e0a ("net: sched: refactor tp insert/delete for concurrent execution")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
Closes: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reported-by: TencentOS Corvus AI <corvus@tencent.com>
Tested-by: Aohan Mei <henrymei@tencent.com>
Link: https://patch.msgid.link/20260805134049.927864-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sun Jian says:
====================
fix skb length accounting after XDP frag adjustment
This series fixes skb length accounting after an XDP program adjusts its
fragment area, in both the generic XDP path (net/core/dev.c) and the veth
native path (drivers/net/veth.c). When the fragment area is resized,
skb->len and skb->data_len can go out of sync, and in the reproduced UDP
receive path this leaked skb_shared_info contents (including a kernel
pointer) to userspace while truncating real payload.
====================
Link: https://patch.msgid.link/20260804054040.613675-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs.
Fixes: 718a18a0c8 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Reported-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://lore.kernel.org/bpf/80687d9c-9c27-494c-b3f2-efd0230b1895@gmail.com/
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-3-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly.
Fixes: e6d5dbdd20 ("xdp: add multi-buff support for xdp running in generic mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/al9T9Eto%2FhRIzP5W@boxer/
Reviewed-by: Mohsin Bashir <hmohsin@meta.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mohsin Bashir says:
====================
selftests: net: shaper: Expand shaper API coverage
Add more net shaper selftest coverage for group operations and nested
node management.
The series first prepares shared cleanup and capability helpers, and
separates the basic netdev grouping coverage from the rate-limited
variant. It then adds tests for updating node shaper rates through both
.set and .group, discovering the supported nesting depth, deleting child
nodes and reparenting their leaves, moving queues between nodes, and
rejecting node reparenting.
Further patches broaden API coverage: exercising the full set of scalar
shaper attributes, rejecting invalid .set requests while leaving the
existing configuration intact, grouping leaves drawn from different
parents (which requires an explicit parent), and recursively cleaning up
nodes left empty.
The new tests use the capability helper to skip unsupported devices
instead of depending on earlier test ordering, size their queue
requirements from the number of TX queues exposed in sysfs, and register
cleanup for created shapers as soon as the operation succeeds.
TAP version 13
1..22
ok 1 shaper.get_shapers
ok 2 shaper.get_caps
ok 3 shaper.set_qshapers
ok 4 shaper.del_qshapers
ok 5 shaper.set_nshapers
ok 6 shaper.del_nshapers
ok 7 shaper.set_all_supported_attrs
ok 8 shaper.invalid_set_preserves_state
ok 9 shaper.mixed_parent_group_requires_parent
ok 10 shaper.recursive_empty_node_cleanup
ok 11 shaper.basic_groups
ok 12 shaper.basic_groups_with_rate
ok 13 shaper.qgroups
ok 14 shaper.set_node_shaper
ok 15 shaper.group_update_rate
ok 16 shaper.delegation
ok 17 shaper.nested_depth_limit
ok 18 shaper.delete_child_reparent
ok 19 shaper.move_queue_between_nodes
ok 20 shaper.reject_reparenting
ok 21 shaper.dup_leaves
ok 22 shaper.queue_update
====================
Link: https://patch.msgid.link/20260805030936.1092907-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exercise cleanup of nested nodes after deleting their last queue leaf. The
test builds a two-level node hierarchy and checks that removing the queue
also removes both now-empty node shapers.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-15-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add coverage for grouping leaves that currently belong to different parent
nodes. The test verifies that an implicit parent is rejected, an explicit
parent succeeds, and the old empty parent nodes are cleaned up.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-14-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Verify that invalid set requests fail without corrupting existing queue
shaper state. The test covers invalid node creation through set and invalid
queue identifiers, then confirms the original queue configuration remains
unchanged.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-13-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exercise queue-scope scalar shaper attributes reported by the device,
including rate limits, burst, priority and weight. Build the set request
from advertised capabilities so devices are tested for the attributes they
claim rather than skipped for missing unrelated fields.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-12-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add reject_reparenting to verify that the group operation rejects attempts
to change an existing node's parent. The test creates two node shapers
under netdev and verifies that re-grouping the first node under the second
fails with EOPNOTSUPP. It also verifies that updating the node with the
same parent succeeds, and that updating the node without specifying a
parent keeps the queue leaves under the original node while updating their
weights.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-11-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add move_queue_between_nodes to verify that a queue can be moved
from one node to another via re-grouping. Creates N1 with Q1,Q2
and N2 with Q3, then re-groups N2 with Q1,Q3 to steal Q1 from
N1. Verifies Q1 moved to N2 and Q2 remains under N1.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-10-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add delete_child_reparent to verify that deleting a child node
reparents its queue leaves to the parent node. Creates a two-level
hierarchy (N1 with Q1,Q2 and child N2 with Q3), deletes N2, and
verifies Q3's parent becomes N1.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-9-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add nested_depth_limit to incrementally create deeper nesting
levels until the driver rejects. Reports the maximum supported
nesting depth on both pass and fail. A device advertising nesting
support must support at least depth 2, otherwise nesting is
meaningless.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-8-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add group_update_rate to test updating an existing node's rate
via the .group callback. Creates a node with bw_max=10000,
re-groups with bw_max=50000, and verifies the rate changed while
leaves remain under the same node.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-7-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add set_node_shaper to test updating a NODE scope shaper's rate
via the .set callback. Creates a node group with bw_max=10000,
updates to 20000 via .set, and verifies the change.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test that groups queues under the netdev parent with rate
limiting enabled. Extract the common group-under-netdev flow into
_group_under_netdev helper to share with basic_groups.
The test independently checks for netdev scope bw_max and metric
capabilities before proceeding, and verifies that the netdev
shaper persists after leaf deletion.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Decouple basic_groups from the set_nshapers test dependency. The
test was gated on cfg.netdev which is set by set_nshapers. Replace
with direct capability checks: netdev scope support (required for
grouping under netdev handle) and queue scope nesting + weight.
Remove bw-max and metric from the .group call so the test validates
pure queue grouping without rate limiting. The rate-limited variant is
restored in the following patch, which adds a dedicated
basic_groups_with_rate test.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dup_leaves expects the kernel to reject a group request that lists the same
queue twice. When that rejection does not happen, ksft_raises only records
a failed check and leaves cm.exception as None, so the following errno
check raises AttributeError. Worse, the accepted group request leaves a
node shaper and queue 0 behind, which makes later tests fail for an
unrelated reason. Handle the negative test explicitly instead. If group
fails, verify that the errno is EINVAL and return. If group succeeds,
delete the node returned by the operation and queue 0 before reporting the
failure.
Give the duplicate leaves different weights so the request still contains
two distinct leaf entries while exercising duplicate handle validation.
This also introduces _delete_shaper(), cached _cap_get(), and
_require_caps() helpers as preparation for the following shaper group
tests. The follow-on tests need the same capability checks for node and
queue scope support. Keeping that logic in one place avoids repeating raw
EOPNOTSUPP handling in each test.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 57bb59ab6f ("selftests: net: bump default cmd() timeout to 20
seconds") raised the default cmd() timeout to 20 seconds, so the explicit
timeout=10 passed to the ethtool channel commands in queue_update() is
now redundant and, in fact, shorter than the default. Drop it and rely
on the default timeout.
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260805030936.1092907-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building with W=1 reports a -Wformat-truncation warning on
niu_set_irq_name(): the "%s:SYSERR" format could be truncated
because irq_name[] was one byte too small for the worst case
interface name length (IFNAMSIZ-1) plus the ":SYSERR" suffix.
Increase the irq_name buffer size to account for the suffix and
replace the remaining sprintf() calls in the same function with
snprintf() to avoid possible buffer overflows.
Tested:
- Built the kernel with W=1 and confirmed the warning is no longer reported.
- No NIU hardware was available for runtime testing.
Signed-off-by: Ronan Marchal <ronanmarchal29@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260803211149.10585-1-ronanmarchal29@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mt7530: fix remaining swallowed MDIO access errors
The original series, "net: dsa: mt7530: fix swallowed MDIO read
errors", landed on net as its v1 [1] just before its v2 [2] was sent.
This series started from the fixes in that original v2 which its v1
had not already carried: the two standalone patches that original v2
grew from the Sashiko AI review of its v1 (the mtk-lynxi read check
and the regmap IRQ serialization), plus, split into patches of their
own, the companion fixes original v2 had folded into the
already-applied patches -- the unchecked bus->read() in core_rmw() and
the unchecked PHY_IAC command writes in the MT7531 indirect PHY access
functions.
The Sashiko AI review of this series' own v1 [3] then flagged two more
swallowed MDIO errors of the same kind, added here as patches of their
own: the unchecked CORE_PLL_GROUP4 read-modify-write in mt7531_setup(),
and the unchecked ATC/VTCR command-register writes in mt7530_fdb_cmd()
and mt7530_vlan_cmd().
The remaining non-fix changes from the original v2, dropping a
redundant read-back and improving the poll failure messages, will
follow via net-next.
[1] https://lore.kernel.org/netdev/cover.1785213071.git.daniel@makrotopia.org/
[2] https://lore.kernel.org/netdev/cover.1785368701.git.daniel@makrotopia.org/
[3] https://lore.kernel.org/netdev/cover.1785427248.git.daniel@makrotopia.org/
====================
Link: https://patch.msgid.link/cover.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch register regmap is created with .disable_locking = true;
every other user in this driver calls mt7530_mutex_lock()/unlock()
around it, which takes priv->bus->mdio_lock, since the underlying
mt7530_regmap_read()/write() issue raw, unserialized bus->read()/
write() MDIO transactions.
mt7530_setup_irq() hands this same unlocked regmap straight to
devm_regmap_add_irq_chip_fwnode(), whose threaded IRQ handler then
calls regmap_read()/regmap_update_bits() on it without ever calling
mt7530_mutex_lock(). An interrupt firing while another thread is
mid-transaction on the same regmap (e.g. a paged register access, or
an indirect PHY access) can interleave with the IRQ handler's own
paged access and corrupt page selection on either side.
Use struct regmap_irq_chip's handle_mask_sync hook to call
mt7530_mutex_lock()/unlock() around the mask register write regmap-irq
issues whenever a consumer of one of the mapped sub-IRQs enables,
disables, requests or frees its line. This needs a per-device copy of
mt7530_regmap_irq_chip, since devm_regmap_add_irq_chip_fwnode() keeps
a pointer to it rather than copying it.
handle_pre_irq/handle_post_irq, which would additionally cover the
status read and ack write the threaded handler does directly, bracket
the whole handler including its handle_nested_irq() calls. Lockdep
caught this on hardware: those calls reach phy_interrupt() for the
per-port PHY IRQ lines mapped through this chip, which takes
phydev->lock, while phy_attach_direct() and this driver's own indirect
PHY access already establish the opposite order (phydev->lock, then
priv->bus->mdio_lock) elsewhere. Using them here would close that
cycle, so they are not used.
regmap_irq_sync_unlock() also has its own init_ack_masked path, used
by this chip, which unconditionally does its own regmap_write() to ack
currently-masked IRQs; that path has no per-driver hook. Together with
the threaded handler's own status read and ack write, these stay
unprotected -- a narrower, harder-to-hit gap than the recurring mask
sync above -- and will be closed once the switch regmap moves to
regmap's own locking in the driver-wide register access cleanup.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/818840879e9cd20f8d568789da29b3474c8f3ab9.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt7530_fdb_cmd() and mt7530_vlan_cmd() start a command by writing the
BUSY bit to MT7530_ATC / MT7530_VTCR, then poll for it to clear.
mt7530_write() discards the write's return value, so a failed command
write leaves BUSY unset and the poll succeeds on its first read,
reporting a command that never ran as done -- returning stale FDB data
or silently dropping a VLAN table update.
Return mt7530_mii_write()'s error from mt7530_write() and check it in
both command helpers.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/0e5d65a672313286e5a8ce28a9faba9c8972dbb6.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt7531_setup() reads CORE_PLL_GROUP4 through the MT7531 indirect c45
PHY access, modifies it and writes it back to enable the PHY core
PLL, but checks neither the read nor the write. Now that the indirect
access functions propagate command-write failures, a failed read
returns a negative errno that would be bit-modified and written back
into the PLL register, and a failed write-back would go unnoticed.
Check both and bail out. The adjacent EEE advertisement writes push a
constant value and cannot corrupt state, so they are left as is.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/a7dfe3b66ea6ac1ae7915034de0527060e6ddcd4.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MT7531_PHY_ACS_ST is only ever set by the command write that precedes
each poll in the MT7531 indirect PHY access functions, and that
write's return value is discarded. A failed write leaves ACS_ST at 0
from the previous access, so the poll succeeds on its first iteration
and the functions return stale IAC contents as if they were fresh PHY
data. Check the writes and bail out before polling.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/c34602e63a20ebbfb97babd145c82832d7a0b523.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core_rmw() accesses the MMD core registers directly rather than
through the regmap and has the same unchecked bus->read() as the
one just fixed in the MDIO regmap backend: a negative errno is
consumed as register data, modified and written back to the switch.
Check the read and bail out like the surrounding bus accesses do.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/48bb9f0b311a9efeda2a6b24a7e05d4792393a3b.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mtk_pcs_lynxi_get_state() ignores regmap_read()'s return value; a
failed read leaves bm and adv holding uninitialized stack values
which are then decoded into the reported link state. The regmaps
backing the MT7531 SGMII PCS instances sit on an MDIO bus where
reads can fail. Check both reads and report the link as down on
error; phylink presets state->link before the callback, so a bare
return would leave a failed read reported as link-up.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/fce70657fc03bbaf60a04c0fbf2f418531135c4f.1785811140.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hwprobe vDSO data is populated by the first riscv_hwprobe syscall.
Some values, such as MISALIGNED_VECTOR_PERF, may depend on the async
vector unaligned access speed probe registered by
check_unaligned_access_all_cpus().
That initcall currently runs at late_initcall level. However,
rootfs_initcall enables usermode helpers before late initcalls run, so an
early helper can execute userspace and call riscv_hwprobe first.
In that case complete_hwprobe_vdso_data() consumes the initial
pending_boot_probes reference, populates the vDSO cache, and marks it
ready before the later async probe is registered. The eventual probe
result then cannot update the already-ready cache.
Move check_unaligned_access_all_cpus() to fs_initcall_sync. This still
runs after clocksource_done_booting(), so the ktime_get_mono_fast_ns()
benchmark uses a stable clocksource, but it runs before rootfs_initcall
enables usermode helpers.
Any async hwprobe probe is therefore registered before userspace can
trigger the one-time vDSO cache population.
Cc: stable@vger.kernel.org
Fixes: 6455c6c118 ("riscv: Clean up & optimize unaligned scalar access probe")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20260721150511.1607105-1-qirui.001@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
drivers/s390/net/fsm.h contains comments starting with '/**'
that don't follow kernel-doc syntax, triggering warnings when
running:
scripts/kernel-doc -none -Wall drivers/s390/net/fsm*
Example warning:
Warning: drivers/s390/net/fsm.h:14 This comment starts with '/**', but isn't a kernel-doc comment. Refer to Documentation/doc-guide/kernel-doc.rst
* Define this to get debugging messages.
Convert function declarations to proper kernel-doc format per
Documentation/doc-guide/kernel-doc.rst. Change debug macros and
internal structure comments from '/**' to '/*' since they are
not part of the public API. Also add missing parameter name in
fsm_settimer() declaration to match the implementation. Remove
redundant extern keywords from all function declarations.
No functional change.
Reviewed-by: Aswin Karuvally <aswin@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
Link: https://patch.msgid.link/20260803182736.2356374-1-nagamani@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Disable liknk power management on yet another misbehaving WD drive
(Niklas).
- Fix a use after free issue in the pata_sl82c105 driver (Hongyan).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCanZp5gAKCRDdoc3SxdoY
dtQwAP0Yq6NUePN6QaCMJL214S3VVASmM5HaDuj3pECJbXBUxgD+L+i3CkytaJKi
pII90cCwLvXXuRT35HO5XXQGxt3Z5AY=
=CUb4
-----END PGP SIGNATURE-----
Merge tag 'ata-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Disable link power management on yet another misbehaving WD drive
(Niklas)
- Fix a use after free issue in the pata_sl82c105 driver (Hongyan)
* tag 'ata-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_sl82c105: fix bridge revision use-after-free
ata: libata-core: Disable LPM on WDC WD141KFGX-68FH9N0
Danielle Ratson says:
====================
bridge: Validate and clean up IPv6 neighbour suppression
The bridge implements IPv6 neighbour suppression by snooping Neighbour
Solicitation and Neighbour Advertisement messages, but it previously only
checked the ICMPv6 type and code before acting on them. This leaves it
open to acting on malformed or spoofed packets that any RFC 4861 compliant
node should reject, and the option parsing in br_nd_send() open-codes a
loop that has historically been a source of bugs.
This series hardens and cleans up that path:
Add ndisc_check_ns_na(), a standalone NS/NA validator modeled after
ipv6_mc_check_mld(), implementing the RFC 4861 section 7.1.1 / 7.1.2
mandatory receive checks (hop limit, checksum, code, length, target and
option validation). Wire the bridge into it so NS/NA messages are
validated to the same standard MLD already enjoys.
Replace the manual ND option parsing loop in br_nd_send() with
ndisc_parse_options() and ndisc_opt_addr_data(), and linearize the skb
once it has been validated as an NS/NA message so that this and any future
ND message handling operate on a linear buffer. The first patch is a small
preparatory cleanup that drops the now-unnecessary skb_header_pointer()
fallback from br_is_nd_neigh_msg().
No functional change is intended for well-formed packets.
Patchset overview:
Patch #1: drop the skb_header_pointer() fallback.
Patches #2-#3: add ndisc_check_ns_na() and validate NS/NA with it.
Patch #4: linearize once the ND message type is validated.
Patch #5: parse options via ndisc_parse_options().
====================
Link: https://patch.msgid.link/20260803112505.613873-1-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the manual ND option parsing loop in br_nd_send() with
ndisc_parse_options(), which provides proper validation and avoids the
class of bugs that were fixed by commit 53fc685243 ("bridge: Avoid
infinite loop when suppressing NS messages with invalid options") and
commit 850837965a ("bridge: br_nd_send: validate ND option lengths").
Use ndisc_opt_addr_data() to extract the source link-layer address
from the parsed options, which correctly validates the option length
for the underlying device type.
Export ndisc_parse_options() so that it can be resolved from the bridge
when it is built as a module (CONFIG_BRIDGE=m); otherwise modpost fails
with an undefined symbol.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260803112505.613873-6-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_nd_send() parses ND options from ns->opt[] and therefore needs the skb
to be linear. Commit a01aee7caf ("bridge: br_nd_send: linearize skb
before parsing ND options") ensured that by linearizing inside
br_nd_send() itself.
Move the linearization up into br_is_nd_neigh_msg(), right after
ndisc_check_ns_na() has validated the message as an NS/NA. This makes a
linear buffer a property of every recognized ND message, so that this and
any future ND message handling operate on a linear skb and cannot
reintroduce that class of bug by forgetting to linearize.
Since the skb is now linear by the time br_nd_send() runs, drop the
linearization there and derive ns from the transport header set by
ndisc_check_ns_na(), instead of recomputing it from the network header.
If linearization fails under memory pressure, br_is_nd_neigh_msg() returns
NULL and the packet falls back to normal forwarding rather than being
suppressed.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260803112505.613873-5-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge performs neighbor suppression by snooping NS/NA messages, but
previously only checked the ICMPv6 type and code. This leaves it open to
acting on malformed or spoofed packets that any RFC-compliant node should
reject.
Wire br_is_nd_neigh_msg() into the new ndisc_check_ns_na() helper, which
enforces the full RFC 4861 section 7.1.1/7.1.2 receive validation:
hop limit of 255, valid checksum, correct code, and type-specific rules
(NS target not multicast; NA solicited flag clear for multicast
destinations).
MLD messages are already validated by ipv6_mc_check_mld() before the
bridge acts on them; this brings NS/NA to the same standard.
As a side effect, the skb parameter of br_is_nd_neigh_msg() changes from
const to non-const, since ndisc_check_ns_na() may reallocate the skb head
via pskb_may_pull() and sets the transport header. The returned pointer is
now derived from skb_transport_header() rather than a direct cast.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260803112505.613873-4-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ndisc_check_ns_na(), a standalone NS/NA packet validator modeled
after ipv6_mc_check_mld(). It performs the RFC 4861 section 7.1.1
(Neighbor Solicitation) and 7.1.2 (Neighbor Advertisement) mandatory
checks that are relevant for software operating at the bridge level,
where packets bypass the normal IPv6 stack path:
- Hop Limit must be 255 (packet was not forwarded by a router)
- ICMPv6 checksum is valid
- ICMP Code is 0
- ICMP length is at least 24 octets (sizeof(struct nd_msg))
- Target Address must not be a multicast address
- All included options have a length that is greater than zero
- NS/DAD: destination must be a solicited-node multicast address
- NS/DAD: no Source Link-Layer Address option when source is unspecified
- NA: Solicited flag must be 0 when IP Destination is multicast
On success the function sets the skb transport header and returns 0,
matching the convention of ipv6_mc_check_mld().
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260803112505.613873-3-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both callers of br_is_nd_neigh_msg() already call pskb_may_pull() to
ensure sizeof(struct ipv6hdr) + sizeof(struct nd_msg) bytes are in the
linear area before invoking this function. The skb_header_pointer()
call and its fallback buffer are therefore unnecessary.
Replace skb_header_pointer() with a direct cast to ipv6_hdr(skb) + 1
and drop the now-unused 'msg' parameter and its corresponding stack
buffer from all callers.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260803112505.613873-2-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Align function args
- Fix comment style
- Fixup formatting around edac_device_reset_delay_period() too
The not-too-trivial change is converting the
edac_device_reset_delay_period() msec argument to unsigned int as that
is what the rest of the code expects.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
The EcoNet EN7528 MIPS SoC embeds four Gigabit Ethernet PHYs (PHY ID
0x03a29491) behind its built-in MT7530 switch. They use the same LED
register layout as the other SoC PHYs handled by this driver, but their
LED controller powers up with its external control disabled, so the LED
pins stay dark regardless of what is programmed into the LED control
registers.
Add a phy_driver entry for it, modelled on the Airoha AN7583 one. Its
config_init callback enables the LED controller through the LED basic
control register, which this driver does not program for its other
PHYs, but which the air_en8811h driver already handles as
AIR_PHY_LED_BCR. LED behaviour is then controlled through the phylib
LED operations shared with the other PHYs of this driver.
The LED block is shared by the four PHYs of the EN7528: the LED
configuration programmed through any one of them applies to all four,
while each PHY still drives its own LED pin from its own link state.
The EN7528 PHYs need no efuse calibration data, so relax the
MEDIATEK_GE_SOC_PHY dependencies to allow building the driver on the
ECONET platform.
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260804103321.3331802-1-naseefkm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU.
Fixes: e27e3dac65 ("drivers/edac: add edac_device class")
Signed-off-by: Jad Keskes <inasj268@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260730145549.148229-1-inasj268@gmail.com
Otherwise in f2fs_sanity_check_node_footer(), it will check the
same nid incorrectly.
Cc: stable@kernel.org
Fixes: 0a736109c9 ("f2fs: fix to do sanity check on node footer in __write_node_folio()")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
