Matt was not very active reviewer in last years. Furthermore he
apparently left Google and his email doesn't work anymore. I didn't find
any working contact for him so at least for now delete the entry with
non-existent email.
Signed-off-by: Jan Kara <jack@suse.cz>
There is just one set of changes that the remaining IO expansion chips
on the TH1520-based LicheePi 4a board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCamfmlAAKCRDb7CzD2Six
DDehAQChtA/two2PhKC3UEHpwNYI0WGGenAJxWrmL4Pp5IKVYgD/azDUxAEJ7duG
ejz2YONec+NvXG+AZoKxmbKgPzOErgk=
=uG96
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c8kz
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD device tree changes for v7.3
There is just one set of changes that the remaining IO expansion chips
on the TH1520-based LicheePi 4a board.
* tag 'thead-dt-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: Add remaining Lichee Pi 4A IO expansions
riscv: dts: thead: Add IO labels for the IO expansion on I2C1
riscv: dts: thead: lpi4a: sort nodes
riscv: dts: thead: Add TH1520 I2C nodes
riscv: dts: thead: th1520: remove pclk for I2C1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
intel_dp_hdmi_sink_max_frl() limits the sink's max FRL rate by its
DSC max FRL rate whenever the sink supports DSC 1.2.
However, the DSC max FRL rate (HF-VSDB DSC_Max_FRL_Rate) only applies
to compressed video transport, which requires a DSC 1.2 encoder in
the PCON (configured via intel_dp_pcon_dsc_configure()).
Without such an encoder the HDMI link always carries uncompressed
video, for which the regular Max_FRL_Rate is the correct limit.
Applying the DSC limit unconditionally trains the FRL link at a lower
rate than both the PCON and the sink support.
E.g. an LG OLED G4 (Max_FRL_Rate 48 Gbps, DSC_Max_FRL_Rate 24 Gbps)
behind a Synaptics VMM7100 PCON (PCON max FRL bw 48 Gbps, no DSC
encoder):
Sink max rate from EDID = 24 Gbps
FRL trained with : 24 Gbps
while Windows/macOS train the same hardware at 40/48 Gbps.
The too low FRL rate needlessly constrains the formats available to
the sink.
Only apply the sink's DSC max FRL rate if the PCON has a DSC 1.2
encoder, matching the gate in intel_dp_pcon_dsc_configure().
PCONs with a DSC encoder keep the current conservative behavior,
since the link is trained once and compressed transport may be used
for any subsequent mode.
With this the setup above trains at 48 Gbps.
Tested on PTL (xe) with the above PCON/sink combo.
Fixes: 10fec80b48 ("drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260718105207.5565-3-alexander.kaplan@sms-medipool.de
(cherry picked from commit 71b57dd92f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When we fail to write out inode when adding new xattr block, we backed
out some changes (like quota modifications) but left others (like block
allocation or inode xattr block modification). Just leave the inode
intact in this case because we can hardly reach a consistent state and
defer fixing to e2fsck. Also remove outdated comment and special data
handling since sync_inode_metadata() does not write out any data.
Link: https://patch.msgid.link/20260728154724.3934977-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Control-flow integrity is controlled through a WARL field in henvcfg.
Expose the feature only if the Zicfilp/Zicfiss is supported for VS-mode.
Allow the VMM to block access to the feature by disabling the ISA
extension in the guest.
Assisted-by: YuanSheng:claude-4.7-opus
Co-developed-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20260713010302.303278-8-inochiama@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
isert_login_recv_done() records how many bytes the HCA actually placed in
the login buffer, but nothing compares that against the length the login
PDU's BHS declares. isert_rx_login_req() copies min(login_req_len,
MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then
reads the declared length back out of that buffer - for the first PDU in
iscsi_target_locate_portal(),
payload_length = ntoh24(login_req->dlength);
tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL);
and for the ones after it in iscsi_decode_text_input(), reached from
iscsi_target_do_login().
login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so
an initiator that declares more than it sends reads off the end of it,
before authentication and with the length under its control:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_target_locate_portal+0x48d/0x1180
iscsi_target_login_thread+0x19a9/0x3350
Allocated by task 167:
__kmalloc_cache_noprof+0x158/0x370
iscsi_target_login_thread+0x971/0x3350
which belongs to the cache kmalloc-8k of size 8192
allocated 8192-byte region
Falsifying the second login PDU instead reaches the other reader, on the
same buffer:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50
Workqueue: isert_login_wq iscsi_target_do_login_rx
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_decode_text_input+0xc6/0x11c0
iscsi_target_do_login+0x261/0x1470
iscsi_target_do_login_rx+0x51d/0x7d0
iscsit over TCP is not exposed: iscsit_get_login_rx() validates the
declared length with iscsi_target_check_login_request() and then reads
exactly that many bytes off the socket, so the declared length governs
how much arrives rather than how much is copied out of an already-filled
buffer. isert does not call iscsi_target_check_login_request() at all.
Reject a login PDU whose declared DataSegmentLength exceeds what was
received, in both paths that reach isert_rx_login_req():
isert_get_login_rx() for the first login PDU and isert_login_recv_done()
for the ones after it. dlength <= login_req_len is allowed because the
received count can include up to three bytes of iSCSI padding.
Once the check is in place the copy out can no longer exceed the copy in:
the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot
exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is
login_req_len.
Like the existing short-PDU check added by 29e7b925ae, the reject in
isert_login_recv_done() returns without completing login_req_comp, so a
malformed subsequent PDU leaves the login to be torn down by the login
timer rather than failing immediately. The first-PDU path returns an
error and fails straight away.
Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an
initiator that sends the real key=value payload while declaring 8193 in
the BHS, on the first login PDU and on the second in separate runs. The
reported read size tracks the declared value exactly; 16384 and 61440
behave the same. Unpatched 3 of 3 runs report on each of the two paths,
patched 0 of 3 on both, run alternately in a single session, and a normal
login still completes on the patched build.
Fixes: b8d26b3be8 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260726163931.971063-3-yhlee@isslab.korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
isert_recv_done() hands each received PDU to the opcode handlers without
ever looking at wc->byte_len, the number of bytes the HCA actually placed
in the receive descriptor. The handlers then copy that many bytes - the
data-segment length the initiator declared in the BHS
(ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) -
out of the fixed-size descriptor:
isert_handle_iscsi_dataout():
sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc),
unsol_data_len);
isert_handle_scsi_cmd():
sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents,
isert_get_data(rx_desc), imm_data_len);
Because the declared length is never checked against wc->byte_len, an
initiator can declare a data segment larger than the bytes it actually
sent (and larger than the descriptor) and cause an out-of-bounds read of
the receive buffer.
Nothing upstream of isert closes this door:
- __iscsit_check_dataout_hdr() bounds the inbound payload against
conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter,
used here for the inbound check.
- iscsi_set_connection_parameters() sets
ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength;
and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in
iscsi_check_acceptor_state(), so the value the initiator declares is
adopted verbatim (type range 512..16777215). The initiator effectively
raises its own ceiling.
- isert never clamps the negotiated value to its own fixed receive
descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and
the descriptor size are unrelated.
The imm_data_len == data_len path is more than an over-read: it aliases
the receive descriptor via sg_set_buf() and passes it to the backend as
the data source for the SCSI WRITE, so an over-declared length causes heap
contents past the descriptor to be written through the backend to the
backing store. The backend is the victim of the oversized scatterlist
isert hands it, not the cause; no read-back of the written bytes was
demonstrated.
Trigger: after login completes (full feature phase), an initiator that has
declared a large TargetRecvDataSegmentLength and a FirstBurstLength that
permits unsolicited/immediate data sends a PDU whose declared data-segment
length exceeds what was received. With KASAN:
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0
Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25
Workqueue: ib-comp-wq ib_cq_poll_work
Call Trace:
sg_copy_buffer+0x150/0x1c0
isert_recv_done+0xba6/0x2390
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout()
(ib_isert.c:1160), inlined through isert_rx_opcode().
Validate wc->byte_len against the framing in isert_recv_done() before the
PDU reaches any handler, and reinstate the connection if it is short.
Because the test compares without subtracting the header length, it also
rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise
be parsed out of stale descriptor contents. The login handler rejects PDUs
shorter than ISER_HEADERS_LEN (commit 29e7b925ae ("IB/isert: Reject login
PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared
length either; that is fixed in the next patch. The data handlers had no
length check at all.
isert reads the data segment from a fixed offset: isert_get_data()
returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for
an AHS. The bytes the handlers touch are therefore exactly
[ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum
against wc->byte_len bounds precisely the region that is read. An AHS
term would only make the test stricter without bounding anything further,
and cannot cause a false reject: a PDU carrying an AHS is longer, not
shorter.
This is a memory-safety fix that verifies the bytes that were actually
received; it does not touch RFC 7145 length negotiation and is not the
MaxXmitDataSegmentLength negotiation redesign raised in the 2017 "[Query]
iSER-Target: QP errors observed on increasing MaxXmitDataSegmentLength"
discussion. That redesign is explicitly out of scope here.
The patched kernel rejects the malformed DataOut PDU and both
immediate-data variants with "PDU declares ... bytes were received" and
continues to pass normal traffic with no regression.
Reproduced with soft-RoCE (rdma_rxe) and a raw rdma_cm/ibv initiator; no
kernel-side test hooks were needed.
Fixes: b8d26b3be8 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260726163931.971063-2-yhlee@isslab.korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The extension Zicfiss/Zicfilp introduces a software-check exception
to the privilege architecture. Redirect this exception to VS mode
when VCPU enable Zicfiss/Zicfilp so the CFI violations in VU/VS could
be reported.
Also, update kvm_riscv_vcpu_trap_redirect() to forward the SPELP
state to the VS mode.
Assisted-by: YuanSheng:claude-4.7-opus
Co-developed-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260713010302.303278-6-inochiama@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The Samsung Galaxy Book5 Pro 360 (960QHA) has an upside-down mounted
OV02E10 sensor. The 180 degree rotation is reported in neither the SSDB
nor the _PLD for the sensor (both report a rotation of 0 degrees), so
the image is rendered upside-down in userspace.
Add a DMI quirk entry for this laptop so that the sensor fwnode gets a
"rotation" property of 180 and userspace (e.g. libcamera) can
compensate.
Tested on the Galaxy Book5 Pro 360: with the sensor reporting
V4L2_CID_CAMERA_SENSOR_ROTATION = 180 (verified with an equivalent
local sensor-driver quirk), libcamera renders the image upright.
Signed-off-by: Mihail Antsev <mihail.antcev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The link frequency, retrieved in cvs_csi_enable_streams(), is stored in
the icvs structure to then be used right after in csi_set_link_cfg(),
called only from the same function. Pass it as a function parameter
instead to improve readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
In mt9t112_probe(), the clock error check after devm_v4l2_sensor_clk_get()
calls PTR_ERR(priv->clk) unconditionally, before testing IS_ERR().
On a successful lookup, priv->clk is a valid pointer and calling PTR_ERR()
on it is incorrect API usage. While the comparison against -ENOENT happens
to be harmless in practice (valid kernel pointers never fall in the error
range), this is still a violation of the IS_ERR()/PTR_ERR() contract that
can mislead readers.
Restructure the check to guard PTR_ERR() inside IS_ERR(), using the
simpler != -ENOENT form to avoid an unnecessary else clause.
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The migration to CCI helpers made V4L2_CID_FLASH_DURATION write the
requested duration directly to OV9282_REG_STROBE_FRAME_SPAN, dropping
the conversion from microseconds to the register value.
This made flash strobes too long and produced overly bright frames.
Restore the missing calculation so flash duration is programmed
correctly again.
Fixes: 273f52f3cb ("media: i2c: ov9282: Convert to CCI register access helpers")
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
isys_notifier_init() initialises a v4l2 async notifier and then, for
each CSI-2 port, adds a remote sensor subdev to the notifier's
waiting_list via v4l2_async_nf_add_fwnode_remote(), which allocates a
sensor_async_sd descriptor and takes a fwnode reference.
If parsing or adding a later port fails, the code jumps to the
"err_parse" label, which only drops the current endpoint fwnode
reference and returns, without calling v4l2_async_nf_cleanup(). Any
descriptors already added to the notifier for earlier ports are
therefore leaked, and the caller's error path does not clean up the
notifier either.
Call v4l2_async_nf_cleanup() on the error path, matching the cleanup
already performed when v4l2_async_nf_register() fails. This is safe as
the notifier is always initialised before the loop is entered.
Fixes: a516d36bdc ("media: staging/ipu7: add IPU7 input system device driver")
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
This one was fully static, so no need to fill it in the register
function manually.
Signed-off-by: Link Mauve <linkmauve@linkmauve.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add 5 missing test patterns to complete the available
hardware test patterns.
The original mapping for color bars and solid color in the menu
is preserved to prevent existing userspace application and automated
vendor capture tests.
The changes were validated on a raspberry pi 5 with an imx219 sensor
using v4l2-ctl and rpicam-still.
Signed-off-by: Tharit Tangkijwanichakul <tharitt97@gmail.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Running the sensor on 10 bits mode resulted in FPS being 25% faster than
it should be. This issue did not appear in 8 bits mode. This is mostly
noticeable with libcamera as it can set a target FPS value directly.
This is caused by the V4L2_CID_PIXEL_RATE control being dynamically
changed according to the media bus code, while it should be the same
regardless of the code.
Since we already compute the pixel_clock, use it directly for
V4L2_CID_PIXEL_RATE instead.
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The OVL adaptor registers both an aggregate driver for its child devices
and a component for the main DRM aggregate. Probe currently ignores an
error from registering the child aggregate and leaves that aggregate
registered if registering the DRM component fails. The remove callback
also leaves the DRM component registered.
These imbalances can leave component framework entries referring to a
device whose probe failed or whose driver has been detached. The aggregate
unbind callback also fails to undo component_bind_all(), leaving its child
components marked as bound when the aggregate is removed.
Check the aggregate registration result, unwind it when the component
registration fails, and unregister the component before the aggregate on
remove. Keep runtime PM enabled until both framework registrations have
been removed, and unbind all child components from the aggregate unbind
callback.
Fixes: 453c336463 ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4+
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260721152242.47138-1-mhun512@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Extend the testing coverage in L2 by forcing a nested VM-Exit from L2 to
L1 right after restore on every other iteration. Forcing a nested
VM-Exit while L0 has control (e.g. without explicitly running L2 and
making a hypercall) is valuable, as it often happens during live
migration (e.g. L1 timer interrupt fires by the time the VM lands on the
destination).
To force the nested VM-Exit inject a #UD in to the saved vCPU state, and
intercept #UD from L1.
With this change, the test reliably reproduces the CR2 bug fixed by
commit 5c247d08bc ("KVM: nSVM: Use vcpu->arch.cr2 when updating vmcb12
on nested #VMEXIT") -- at least on Milan, Genoa, and Turin CPUs.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-14-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the stress test to allow running the access+#PF code in L2
instead of L1 by adding proper L1 guest code to bootstrap L2. By
default, the test runs in L2 after running in L1 if nested is supported.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-13-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Instead of an explicit GUEST_SYNC() after each access+#PF, run another
thread that keeps sending SIGUSR to the vCPU thread, essentially
triggering exits to userspace and save+restore on random points in guest
execution. This makes the test a lot more meaningful as it opens the
door to exercising race conditions between #PF handling in the guest
and save+restore in the host.
The signals are ignored using SIG_IGN outside of __vcpu_run() to avoid
interrupting other ioctls/sysctls performed by the test.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-12-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a basic stress test for handling #PFs in a guest while the host is
doing save+restore cycles. The guest periodically accesses non-present
memory causing a #PF, and the #PF handler walks the page tables and
updates the PTE to be present, like a proper #PF handler.
After every access (and #PF), the guest triggers a sync and the test
performs save+restore of the VM. This is not very meaningful as
save+restore are performed after the access and #PF handling complete,
but following changes will change that.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-11-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
init_vmcs_control_fields() sets PFEC_MASK and PFEC_MATCH so that they
never match, which reverses the meaning of the PF_VECTOR bit in
EXCEPTION_BITMAP (which is zeroed), effectively enabling #PF
interception by default.
The relevant part of the SDM describes this:
When a page fault occurs, a processor consults (1) bit 14 of the
exception bitmap; (2) the error code produced with the page fault [PFEC];
(3) the page-fault error-code mask field [PFEC_MASK]; and (4) the
page-fault error-code match field [PFEC_MATCH].
It checks if PFEC & PFEC_MASK = PFEC_MATCH. If there is equality, the
specification of bit 14 in the exception bitmap is followed (for example,
a VM exit occurs if that bit is set). If there is inequality, the meaning
of that bit is reversed (for example, a VM exit occurs if that bit is
clear).
Clear PFEC_MATCH such that there is equality, and the #PF bit in the
exception bitmap is followed, so that #PFs are not intercepted by default,
same as every other exception. This also allows tests to set the #PF bit
in the exception bitmap if they want to intercept #PFs, without having to
muck with the PFEC_{MASK,MATCH} fields.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-10-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 76255024ca ("drm/mediatek: mtk_dsi: enable hs clock
during pre-enable") rightfully moves the HS clock enablement to
before atomic_enable(), but it's moving it to mtk_dsi_poweron(),
which is not only called in the .atomic_pre_enable() callback
for the DRM bridge, but also in the MediaTek DRM's .ddp_start()
callback, which happens way before the bridge ones.
The HS clock enablement should be done at just the right time,
otherwise some bridge chips (or some Display Driver ICs) may
not work correctly: this is seen at least with a Parade DSI to
eDP bridge (PS8640) on the MT8173 Elm Chromebook.
This resolves a regression that was seen on the aforementioned
machine, which was happening only after a suspend-resume cycle.
Cc: <stable@vger.kernel.org> # 7.1.x
Fixes: 76255024ca ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Adam Thiede <me@adamthiede.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260728153145.578404-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Expose a guest_mmu to the guest to allow guest code to use the PTE masks
for page table manipulation. Since guest page tables are not mapped in
the guest by default, zero the PGD in guest_mmu in an attempt to make it
more difficult for new tests to shoot themselves in the foot and assume
that page tables can be immediately used by guest code.
Ultimately, guest code can read CR3 any way, so guest_mmu.pgd doesn't
add a lot of value.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-9-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a blank line for visual separation, which is especially useful for
tests that use carriage returns for same-line printing, in case a
failure occurs before a blank line is ever logged by the test.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-8-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that nVMX test codes preserves GPRs across nested VM-Exits
(specifically RBP, RDX, and RDI among others), drop the ucall-specific
hack to avoid clobbering these registers.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-7-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reuse the GPR switching logic for nVMX by defining VMX_SWITCH_GPRS_ASM,
which is essentially the same as SVM_SWITCH_GPRS_ASM but also switches
RAX and doesn't switch RFLAGS, replacing the push/pop of a subset of the
registers.
The long clobber list of registers is no longer needed as registers are
saved and restored appropriately (and not clobbered by L2).
Define VMX_SWITCH_GPRS_ASM before including evmcs.h, such that it can be
used by evmcs_vmlaunch() and evmcs_vmresume().
This replaces the apparently thread-safe push/pop sequence with the
global GPR switching logic used by SVM, which isn't thread-safe at all.
However this is still an improvement because:
- The VMX logic is half-baked and prompts the UCALL clobber hack as it
doesn't properly save/restore everything. Reusing the GPR switching
logic used by SVM allows for dropping that hack.
- Hitting a problem due to half-baked GPR save/restore logic is arguably
more likely than thread-safety. Evidently, adding more involved stress
tests fails on VMX with the existing push/pop sequence. OTOH, there
are no known failures on SVM due to lack of thread-safety fo
save/restore. Only one test currently uses more than one vCPU with
nested (the memstress test).
The logical next step is to move the guest_regs to be per-vCPU,
making it thread-safe for both VMX and SVM in a proper way.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-6-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Instead of handling rflags separately, add it to guest_regs. No
functional change intended.
Assisted-by: Gemini:Gemini-Next
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-5-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The assembly code defined by SAVE_GPR_C uses the wrong offsets for some
registers in guest_regs. For example, the offset of RCX should be 0x08
not 0x10. Also, the last offset in the struct (R15) is 0x78, not 0x80,
so the code actually saves and restore beyond the end of gpr64_regs.
Eliminate hardcoded offsets by dynamically generating offsets using
offset_of() and using macros to pass the offsets to assembly as asm
constraints.
To avoid register conflicts in inline assembly (since almost all GPRs are
context-switched), access guest_regs via absolute symbol addressing
(guest_regs + offset) rather than using a base register which could
get overwritten mid-assembly.
While at it, rename SAVE_GPR_C and LOAD_GPR_C to a single macro,
SVM_SWITCH_GPRS_ASM, rename gpr64_regs to guest_regs, and expose it in
processor.h (in preparation for reusing it for VMX).
Assisted-by: Gemini:Gemini-Next
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-4-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The offsets used (0x170 and 0x1f8) are offsets within vmcb_save_area,
not vmcb. The correct offsets should include the base of vmcb_save_area
within vmcb (which is 0x400 -- so 0x570 and 0x5f8).
Instead of just correcting the offsets, use vmcb->save.rax and
vmcb->save.rflags as parameters to the asm block and avoid hardcoding
offsets completely. While at it, also use guest_regs.rax directly
instead of assuming it's at offset 0 of guest_regs.
Note: "+m" must be used for vmcb_rax and vmcb_rflags, as caching those
fields in registers would be wrong as the underlying KVM will update
them in memory.
The same problem was recently fixed (differently) for kvm-unit-tests
[1].
[1]https://lore.kernel.org/all/20260521092311.86030-1-pbonzini@redhat.com/
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260518202514.2037078-1-yosry%40kernel.org?part=1
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-3-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the custom defined XSTR() macros in KVM selftests and use
__stringify() instead. Include stringify.h in test_util.h to make it
available for all tests instead of including it in all the tests that
need it, as more tests will start using it.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-2-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use CMPXCHG instead of clear_bit(), which currently emits a LOCK BTR since
the to-be-cleared bit isn't a compile-time constant, when aging SPTEs in
the shadow MMU to align with the approach taken by the TDP MMU, and because
using CMPXCHG is far more robust against bugs in KVM. E.g. if the SPTE is
somehow no longer an SPTE due to a KVM bug, CMPXCHG will fail gracefully,
whereas clear_bit() would potentially corrupt/clobber memory.
Clearing the Accessed bit without atomically ensuring the SPTE is still the
old SPTE is "fine", as holding the rmap's lock ensures zapping the old SPTE
can't fully complete, which in turn ensures a new, different SPTE can't be
installed. But that chain of logic isn't exactly obvious, and there's zero
reason to avoid CMPXCHG as its cost on modern hardware is within ~1-2 uops
of LOCK BTR (and may even be cheaper on some microarchitectures). Doing a
64-bit CMPXCHG on 32-bit kernels does require a more expensive CMPXCHG8B,
but 32-bit KVM is all but dead at this point.
Cc: James Houghton <jthoughton@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://patch.msgid.link/20260728002236.869865-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use LOCK CMPXCHG instead of LOCK AND to clear the Accessed bit when aging
SPTEs in the TDP MMU, as doing a LOCK AND can corrupt a FROZEN SPTE and
allow a third CPU to effectively overwrite the FROZEN SPTE. As pointed
out by AI of some kind, because the magic FROZEN_SPTE value is a "full"
SPTE, not a single bit, and includes the Accessed bit, clearing the
Accessed bit in a FROZEN SPTE will result in is_frozen_spte() getting a
false negative.
E.g. if CPU0 freezes an SPTE, and CPU1 clears the Accessed bit in the
frozen SPTE, then CPU2 could come along and overwrite the frozen SPTE with
a shadow-present SPTE.
Thankfully, the false negative is largely benign, because outside of TDX,
which doesn't support aging, KVM only freezes leaf SPTEs when removing an
upper level shadow page. So while KVM could clobber a frozen SPTE back to
a shadow-present SPTE, and could even use the new SPTE, the subsequent TLB
flush will make the orphaned, shadow-present SPTE unreachable. Failure to
ever zap the orphaned leaf SPTE would show up in KVM's stats, but otherwise
is benign (because KVM no longer keeps an elevated refcount for leaf SPTEs).
Opportunistically add a comment to warn future developers away from using
kvm_tdp_mmu_write_spte_atomic() and tdp_mmu_clear_spte_bits_atomic(), as
they are generally unsafe. Keep the helpers, e.g. instead of open-coding
the atomic64_fetch_and() in tdp_mmu_clear_spte_bits(), as scary warnings
usually are more effective deterrent against recidivism than removal of the
dangerous code.
Alternatively, KVM could use different bits for the magic FROZEN_SPTE value,
e.g. setting the Dirty bits (with effective IPAT and Global aliases) would
likely be "ok", as IPAT/Global are extremely unlikely to be cleared without
doing a full SPTE write, and KVM's clearing of Dirty bits shares logic with
Write-Protection, which must do a full SPTE write (via cmpxchg64() in the
TDP MMU) to ensure KVM isn't clobbering state. But there is zero reason to
carry that risk (beyond stubbornness in wanting to preserve a "cute" idea),
as the cost of LOCK CMPXCHG and LOCK AND are within 1-2 uops of each other
on modern hardware.
Fixes: b146a9b34a ("KVM: x86/mmu: Age TDP MMU SPTEs without holding mmu_lock")
Cc: stable@vger.kernel.org
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Link: https://patch.msgid.link/20260728002236.869865-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add ssp context save/restore for guest VCPUs and also add it to the
ONE_REG interface to allow its access from user space.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260713010302.303278-5-inochiama@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Hardware updating of PTE A/D bits is controlled through ADUE bit in
henvcfg Expose the feature only if both Svadu and Svade are supported
for VS-mode.
Allow the VMM to enable/disable this feature by change the ISA
extension state in the guest.
Assisted-by: YuanSheng:claude-4.7-opus
Co-developed-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260713010302.303278-2-inochiama@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
I haven't been active enough lately to warrant an M: maintainer entry,
demote me to reviewer.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/87y0hspx0u.fsf@mpe.ellerman.id.au
Since kmalloc_nolock() always fails in NMI and hardirq contexts on
PREEMPT_RT, slub_kunit cannot properly test _nolock() APIs.
Register a kprobe pre-handler to invoke kmalloc_nolock() and
kfree_nolock() in the middle of the slab allocator. However, do not
register the handler on UP kernels because that use case is not
well supported [1] in the kernel.
To attach the pre-handler while s->cpu_sheaves->lock or n->list_lock
is held, add a wrapper function for lockdep_assert_held() that calls
a no-op function slab_attach_kprobe_locked() on debug builds. The
function is optimized away when neither CONFIG_PROVE_LOCKING nor
CONFIG_DEBUG_VM is selected and register_kprobe() fails.
The function calls barrier() to prevent the compiler from optimizing
away its callsites. Otherwise, the compiler may consider the function
does not have any side effect and remove callsites.
Compared to using plain kprobe, this has two advantages: 1) it avoids
hardcoding function names in the test, and 2) it can trigger those APIs
in the middle of a function, where the lock is expected to be held as
annotated with lockdep.
While it was proposed [2] to use kunit function redirection to test
this, it is currently infeasible as some lock helpers don't have
symbols.
Factor out the nested loop that calls kmalloc and friends to
test_kmalloc_kfree(), and call them in
test_kmalloc_kfree_nolock_{perf,kprobe}(), each being an independent
test case. During the refactoring, drop alloc_fail handling as it
doesn't provide much benefits.
Link: https://lore.kernel.org/linux-mm/20260427-nolock-api-fix-v2-0-a6b83a92d9a4@kernel.org [1]
Link: https://lore.kernel.org/linux-mm/6edebc2b-5f5a-4b9c-9a4c-564310acee1b@kernel.org [2]
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260729-kfree_rcu_nolock-v5-1-a28cdcda9673@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
The PCON max FRL bandwidth field lives in byte 2 of the DFP Detailed
Capability Info (DPCD 0x82 for the first DFP).
The DP standard defines the meaning of descriptor bytes 1-3 strictly
per DFP type, and for a DisplayPort type DFP all of them are
reserved, with "read all 0s" semantics (DP v2.0, section 2.12.3,
Table 2-183).
The FRL bandwidth field is an HDMI DFP extension added by the VESA
DP-to-HDMI PCON specification.
drm_dp_get_pcon_max_frl_bw() however parses the byte without checking
the DFP type, the branch presence or DETAILED_CAP_INFO_AVAILABLE.
Without the latter the port descriptors are one byte wide and
port_cap[2] is not even the right register.
All neighbouring helpers parsing the same descriptor are scoped by
the DFP type already, see for instance drm_dp_downstream_max_bpc()
reading the same byte and returning 0 for a DP type DFP.
amdgpu's DC parses the field only for HDMI(/DP++) detailed types as
well.
This is not theoretical.
A Synaptics VMM7100 based USB-C to HDMI adapter with a macOS targeted
firmware advertises a DisplayPort type DFP with the type byte
replicated across the whole descriptor (08 08 08 08).
i915 decodes that as "PCON limited to 18 Gbps FRL" and prunes every
mode above ~750 MHz dotclock, including all the 4k@100/120 modes the
sink EDID offers, while macOS drives 4k@120 through the same adapter
just fine via DP DSC (and amdgpu's type-scoped parser would ignore
the bogus field as well).
Only parse the field for an HDMI DFP behind a DPCD 1.1+ branch
device that reports detailed cap info, matching the type-scoped
field layout of the spec and the rest of the helpers.
Fixes: ce32a6239d ("drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260610193825.2933-1-alexander.kaplan@sms-medipool.de
write_tpt_entry() allocates a new STAG index with c4iw_get_resource() and
bumps stats.stag.cur before programming the entry. When
write_adapter_mem() fails, it returns the error without releasing the index
or reversing the statistic. No MR is inserted into rhp->mrs, so
deregistration never reclaims it, leaking the index until device teardown.
Record whether this call allocated the index and, on a failed write, return
it to tpt_table and decrement stats.stag.cur. Key the rollback on both the
write error and that flag, not the error alone: a non-reset update carries
a caller-owned STAG that this call did not allocate and must not free.
Fixes: ec3eead217 ("RDMA/cxgb4: Remove kfifo usage")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Only in a bare metal OS environment, the _OSC control flags like Hotplug,
PME, AER, etc. reflect the physical root bridge capabilities. But in a VM
environment, these flags reflect the hypervisor policy and in most cases,
the hypervisor disables all of these control flags to the guest.
So copying these flags would needlessly disable these features in the VMD
owned Root Ports. Hence, copy the flags only when VMD is running in a bare
metal OS environment.
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
[mani: commit log and comment rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260713220844.561357-1-nirmal.patel@intel.com
mlx5_ib_set_cc_params() resolves the port-specific mlx5_core_dev via
mlx5_ib_get_native_port_mdev() but issued MLX5_CMD_OP_MODIFY_CONG_PARAMS
through dev->mdev. On an affiliated secondary RoCE port those pointers
refer to different devices, so a write to the secondary port's cc_params
debugfs file either altered the master port or failed with a master-side
command error, while the read path already used the resolved mdev and
returned the unchanged secondary value.
Issue the command to the resolved mdev, the same device whose capabilities
were checked when its debugfs directory was created. It is already
referenced by the get/put pair, so its lifetime is safe.
Fixes: 31578defe4 ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://patch.msgid.link/20260726-mlx5-ib-set-cc-params-applies-conges-v1-1-a253edafe1f3@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
get_param() reads a congestion parameter as a u32 but formats it with the
signed "%d" into an 11-byte stack buffer. A value with bit 31 set, such as
0x80000000, renders as "-2147483648\n" whose full length is 12. snprintf()
stores only 11 bytes yet returns 12, so simple_read_from_buffer() treats 12
bytes as valid and reads one byte past lbuf[].
Size the buffer for the widest unsigned decimal, format with "%u" to match
the u32, and use scnprintf() so the length passed to
simple_read_from_buffer() reflects the bytes actually stored.
Fixes: 4a2da0b8c0 ("IB/mlx5: Add debug control parameters for congestion control")
Link: https://patch.msgid.link/20260726-get-param-leaks-kernel-stack-memory-v1-1-d61a4d39662d@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf4 ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to stop it. __del_gendisk() and
blk_mq_destroy_queue() still do; only the probe failure path lost it.
nvme gets there because nvme_update_ns_info() submits Report Zones or
FDP io-mgmt-recv on ns->queue before the disk is added, so a later
failure - a concurrent reset setting NVME_CTRL_FROZEN, or
device_add_disk() failing - lands in put_disk() with the timer armed:
BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340
Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37
__timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621
blk_sync_queue+0x22/0x40 block/blk-core.c:222
nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362
nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264
Allocated by task 34:
__blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462
nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146
Freed by task 0:
blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254
rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857
The queue being synced there is ctrl->admin_q, only a victim sharing a
timer wheel bucket with the freed queue's dangling entry; other runs
tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work().
Failing nvme_alloc_ns() with a debug patch makes it deterministic: one
leaked timer trips KASAN within seconds, while 1987 patched releases
produced no splat.
Stop the timer and the queue work items before blk_mq_exit_queue(), like
blk_mq_destroy_queue() does.
Found by FuzzNvme.
Fixes: 6f8191fdf4 ("block: simplify disk shutdown")
Acked-by: Weidong Zhu <weizhu@fiu.edu>
Signed-off-by: Chao Shi <coshi036@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260727201257.211635-1-coshi036@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the device is in the fatal error state, write_tpt_entry() returns -EIO
before handing the caller's preallocated skb to the transmit path; its
allocation-failure returns do the same. c4iw_dereg_mr() ignores the error
and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the
skb a second time after dereg_mem() already consumed it, a double free.
Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on
every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and
stag allocation failure. c4iw_ofld_send() consumes the skb on success and
error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after
dereg_mem().
Fixes: 0f8ab0b6e9 ("RDMA/iw_cxgb4: Low resource fixes for Memory registration")
Link: https://patch.msgid.link/20260726-leaked-mhp-dereg-skb-in-c4iw-dereg-m-v1-1-ebd6df364d53@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
