kprobe_fault_handler() currently treats any page fault taken while in
KPROBE_HIT_SS or KPROBE_REENTER state as a kprobe single-step fault. This
assumption does not hold: perf or tracing code may run from the debug
exception path during the single-step window and take its own page fault.
When the fault is handled as a kprobe fault, the PC is rewritten to the
probe address, corrupting the exception recovery context for the real
fault. A typical reproducer is running perf with preemptirq tracepoints
and dwarf callchains while a kprobe is installed on a frequently
executed function.
Fix this in two layers:
1. At function entry, bail out immediately for simulated kprobes
(ainsn.xol_insn == NULL), since they have no XOL slot and any fault
taken during their execution cannot be a single-step fault.
2. For kprobes with an XOL slot, only handle the fault when the
faulting PC matches the XOL instruction address. Faults from any
other PC are left to the normal page fault handler.
This follows the same principle as the x86 fix in commit 6381c24cd6
("kprobes/x86: Fix page-fault handling logic").
Signed-off-by: Pu Hu <hupu@transsion.com>
Signed-off-by: Hongyan Xia <hongyan.xia@transsion.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
- Fix a build error in certain configurations
- Clarify some parts of the documentation
- Remove unused code that I forgot to remove in commit cf52058dcd
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCalpR7hQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK0FsAP4g1ERoX/xslpz++c9GQPK3QhXGjug5
B1nGMnqDJPQmewD/eAloShBc5VYxnCeDDN24txP2RZeRK9XSG/mGTsdv2wk=
=Dtak
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a build error in certain configurations
- Clarify some parts of the documentation
- Remove unused code that I forgot to remove in commit cf52058dcd
("lib/crypto: powerpc/md5: Drop powerpc optimized MD5 code")
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: aes - Fix conditions for selecting MAC dependencies
lib/crypto: docs: Improve introduction sentence
lib/crypto: docs: Fix some sentence fragments
lib/crypto: md5: Remove support for md5_mod_init_arch()
Sashiko (locally) reports a logical issues in mmio_guard_ioremap_hook()
mmio_guard_ioremap_hook() attempts to handle unaligned addresses and
sizes. However, aligning the start address before adding the size, might
shift the end to the page before.
Fixes: 0f12694958 ("drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
io_install_bpf() only rejects a second registration on the ctx side
(ctx->bpf_ops) and sets the per-map back-pointer ops->priv
unconditionally. The struct_ops link path never advances a map past
BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be
registered more than once, and bpf_io_reg() re-resolves the target ring
via fget(ops->ring_fd) on every call. A caller can therefore point the
same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE
calls.
The second registration passes the ctx->bpf_ops check (the new ctx has
none) and overwrites ops->priv, orphaning the first ctx. Teardown
(io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so
the orphaned ctx is never torn down: its ctx->loop_step keeps pointing
into the struct_ops trampoline, which is freed once the map is gone. A
later io_uring_enter() on the orphaned ring then calls the dangling
ctx->loop_step from io_run_loop() -- a use-after-free of freed
executable memory, reachable by a task with CAP_BPF + CAP_PERFMON.
Reject registration when ops->priv is already set, as hid_bpf_reg()
does for its struct_ops.
Cc: stable@vger.kernel.org
Fixes: 98f37634b1 ("io_uring/bpf-ops: implement bpf ops registration")
Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260717154537.129736-1-worapat.kd2@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io.latency doc says the io.stat delay field counts microseconds. The
field is delay_nsec and is reported in nanoseconds. Refer to it by its
real name and correct the unit.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The test_cgcore_no_internal_process_constraint_on_threads test has two
back-to-back cg_enter_current(root) calls in its cleanup path.
A single cg_enter_current() call atomically migrates the entire thread
group to the target cgroup even for multi-threaded processes, and this
test creates no extra threads or child processes that would require a
second migration attempt. The second call is a harmless no-op once the
process is already in the root cgroup, but it is redundant and
inconsistent with the cleanup logic used in all other cgroup core
selftest cases.
Remove the duplicate call to clean up the code. No functional change is
intended.
Signed-off-by: Jian Guo <guojian@kylinos.cn>
Acked-by: Michal Koutný <mkoutny@suse.com>
Tested-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
On some NXP chipsets, disabling Root Port MSI/MSI-X Capabilities blocks
MSIs originating from Endpoints from reaching the iMSI-RX controller.
To address this hardware bug, commit 3a4e8302e7 ("PCI: imx6: Keep Root
Port MSI capability with iMSI-RX to work around hardware bug") preserves
Root Port MSI and MSI-X Capabilities on i.MX7D, i.MX8MM, and i.MX8MQ
when iMSI-RX is in use.
The same applies to i.MX6Q, i.MX6QP, and i.MX6SX, so preserve Root Port
MSI/MSI-X Capabilities there as well.
Note that preserving these Capabilities means Root Port-originated MSIs
such as AER and PME won't be received due to separate hardware limitations.
Users may need to use workarounds such as passing the 'pcie_pme=nomsi'
command-line parameter.
Fixes: f5cd8a929c ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org # 7.0+
Link: https://patch.msgid.link/20260717033203.2965045-1-hongxing.zhu@oss.nxp.com
The Focaltech ft3d81 is fully compatible with the ft8112 i.e.
it uses the same I2C-HID protocol and the same power-on/reset sequencing,
DT nodes for boards carrying an ft3d81,can therefore bind to the existing
ft8112 driver without any additional changes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Link: https://patch.msgid.link/20260717-add_focaltech_ft3d81_touchscreen_support-v4-1-5dd091e25801@oss.qualcomm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver implements debounce protection using a timer-based mechanism:
when a key interrupt occurs, a timer is scheduled to verify the key state
after DEBOUNCE_TIME before reporting the event. This works well during
normal operation.
However, key press events can be lost during system resume on platforms
like i.MX8MQ-EVK because:
1. During the no_irq resume phase, PCIe driver restoration can take up to
200ms with IRQs disabled.
2. The power key interrupt remains pending during the no_irq phase.
3. If the key is released before IRQs are re-enabled, the timer eventually
runs but sees the key as released and skips reporting the event.
To prevent event loss during system suspend, set a pending_press flag in
the interrupt handler and report the press event from the timer callback
when the flag is set. This avoids out-of-order event delivery and keeps
the existing timer-based debounce mechanism for normal operation.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-4-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the PCI1008 device ID to the quirk_switchtec_ntb_dma_alias PCI fixup
table. Without it, DMA transactions from a PCI1008 switch's NTB function
are not given the correct requester ID alias, which can misdirect them
under an IOMMU.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260714212010.230606-4-logang@deltatee.com
Add the Microchip PCI1008 device ID to the core switchtec management
driver's PCI ID table. Without it, the management endpoint on a PCI1008
switch is not bound by this driver, preventing userspace tools from
configuring or monitoring the switch and leaving NTB functionality
unavailable.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260714212010.230606-3-logang@deltatee.com
- the revert of the uclinux map driver which was presumably no longer
used but in fact was
- the use of SPI match data to get chip capabilities in the mchp23k256
driver
- several fixes addressing the newly introduced virt-concat support
- a missing build dependency on ndfc
There is as well the usual load (if not actually bigger than ususal) of
uninitialized variables, leaks, double free, and AI fuzzed issues being
fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmpaTeQACgkQJWrqGEe9
VoQ0/Af7BpZ9gxFZrgiXBdQ/XcVDfsrP7YP/3D3SLlB7ynwPHrq0YvMdBs8CCp+b
YbTDqBrt0+T1YeZ4igWu50bGSjAz0mLztE2r09/uwrG9YO+B0s98jXRFEqnaOMMf
2ghhrIKr2RB9OPJaigmtdzQij1UAjCIFpWxEz4XLytXQ5oxnzP2j50JyeVxifb1R
3KDw0KBibngn3I5MUQ4OHCg4+6Krf0rtjo8yZWB6LKgVlCcy3eEbYGZMn3YI3T6T
xsOa8KxkBLf2BeAFu2nDp0e/5vEfaVk9fCnRElBDz3kEdJ6LR6k45mLpqfB+U9HN
DhWZswONu0y54xHAmyauVWyYBK/DHg==
=SD+E
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Among the most important fixes that we have here, there are:
- the revert of the uclinux map driver which was presumed to
be no longer used but in fact was
- the use of SPI match data to get chip capabilities in the
mchp23k256 driver
- several fixes addressing the newly introduced virt-concat
support
- a missing build dependency on ndfc
as well as the usual load (if not actually bigger than usual) of
uninitialized variables, leaks, double free, and AI fuzzed issues
being fixed"
* tag 'mtd/fixes-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: maps: remove uclinux map driver"
mtd: onenand: samsung: report DMA completion timeouts
mtd: rawnand: fsl_ifc: return errors for failed page reads
mtd: mchp23k256: use SPI match data for chip caps
mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout
mtd: rawnand: lpc32xx_mlc: fail DMA transfers on timeout
mtd: fix double free and WARN_ON in add_mtd_device() error paths
mtd: virt-concat: free duplicate generated name
mtd: nand: mtk-ecc: stop on ECC idle timeouts
mtd: mtdswap: remove debugfs stats file on teardown
mtd: mtdpart: validate partition bounds in mtd_add_partition()
mtd: mtdpart: fix uninitialized erasesize on MTDPART_OFS_RETAIN error path
mtd: rawnand: ndfc: add CONFIG_OF dependency
mtd: spinand: initialize ret in regular page reads
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy()
mtd: rawnand: ingenic: handle ECC clock enable failures
mtd: nand: ecc-mtk: handle ECC clock enable failures
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins()
mtd: rawnand: ndfc: fix gcc uninitialized var
- Fix RPMB device unregister ordering
- Fix __counted_by handling in mmc_test
MMC host:
- mtk-sd: Document missing clocks for MT8189
- sdhci-esdhc-imx: Fix the support for system suspend/resume for SDIO
- sdhci-of-dwcmshc: Fix error handling for clock prepare/enable
- vub300: Fix lockdep issue for the cmd_mutex
- vub300: Fix use-after-free on probe failure
MEMSTICK:
- Reject a card that reports too many blocks
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmpaF4YQHHVsZmhAa2Vy
bmVsLm9yZwAKCRD+JoQlc1iMKQsXEAC4Y3DuRvuYUi3MVeAI8IqXZKW1qZ2Wg7pD
tvjbS0h1ZLVBPXeWIhjL2N9Y2GWIzbq5Yb0zAyqwl4d99IsNL5j0ul6rQbVWHY6Z
48IJ8idboGeUXZ9foUif8t+gZOVUd6Mecf8GxWkJcwlJ70pt36TCGWPvp3/MkQmP
w6srlDXfIZgQyauQIz+cHYcocD0L7vp6apAcT/QQRLadY4PBpzNfjjgbqr5ogejF
ovRkTUBp2D/ufTV0p8V0ykQ9onac7aV1HrX1ubSjs/2rkxNMOBGRYTeds8YYm4Of
Jljdivx0EeLA638sJ7XO6QGbxT7pwwffRzS+q6VE+NilKghwF3/GE1LPv8NSV+mA
woeSxPCgVxfqF+THGQE9J8NQXtIV6UF7gNHVSp+Vq/aKuykSwnRslUbu7mncgDZC
nv2cwcmlVU98IKDNVFNNMCkMbaEyifWzaxR6gX2Xlo+Qo6n3A/Qz6bSjw5LTkIyg
sAx0jmSKWbgpRZl4eYO16DKDwOkGW5zDEhjxQqtRBcyxv7Yndgl+lcP/fPR0oVCT
/gyZOEsFg3ItfUCW5nMnTRWZ6u8D7tSXXVXaqs8b4HB8Nj7jX2WHfkrmT0+i8oMu
eGXITNNOWp827RZHX1uxzoBMQXfHVIZq8FVECAcrCxnzQz4E5zpP3JKTzz9ydpe6
VG49Xs+JsA==
=IHdC
-----END PGP SIGNATURE-----
Merge tag 'mmc-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix RPMB device unregister ordering
- Fix __counted_by handling in mmc_test
MMC host:
- mtk-sd: Document missing clocks for MT8189
- sdhci-esdhc-imx: Fix the support for system suspend/resume for SDIO
- sdhci-of-dwcmshc: Fix error handling for clock prepare/enable
- vub300:
- Fix lockdep issue for the cmd_mutex
- Fix use-after-free on probe failure
MEMSTICK:
- Reject a card that reports too many blocks"
* tag 'mmc-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: fix resume error handling
mmc: sdhci-esdhc-imx: make non-fatal errors non-blocking in suspend
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
mmc: sdhci-esdhc-imx: restore pinctrl before restoring ios timing on resume
mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore
mmc: sdhci-esdhc-imx: restore DLL override for DDR modes on resume
mmc: sdhci-esdhc-imx: remove unnecessary mmc_card_wake_sdio_irq check for tuning save/restore
mmc: block: fix RPMB device unregister ordering
memstick: ms_block: reject a card that reports too many blocks
dt-bindings: mmc: mtk-sd: Document extra clocks for MT8189
mmc: vub300: defer reset until cmd_mutex is unlocked
mmc: vub300: fix use-after-free on probe failure
mmc: mmc_test: Fix __counted_by handling after kzalloc_flex() conversion
mmc: sdhci-of-dwcmshc: check bus clock enable result in the probe() method
This reverts commit e057b94772.
Sashiko points out that updating 'orig_x0' after secure_computing()
has returned is too late to handle the case where a seccomp filter is
re-evaluated after initially returning SECCOMP_RET_TRACE. This means
that a tracer can manipulate the first argument of the syscall behind
seccomp's back.
For now, revert the initial fix and we'll have another crack at it soon.
Since the incorrect fix was cc'd to stable, do the same here with an
appropriate fixes tag.
Cc: stable@vger.kernel.org
Fixes: e057b94772 ("arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates")
Link: https://sashiko.dev/#/patchset/20260716120640.6590-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
ttm_pool_split_for_swap() unconditionally splits high-order pool pages
into order-0 pages before backup, so every compound the shrinker
touches is shattered even when the rest of the system would prefer it
stay intact. Under sustained kswapd pressure this fragments memory
enough to drive other parts of MM into recovery loops.
Back up each compound at its native order instead. In
ttm_pool_backup(), hand the full compound to the new
ttm_backup_backup_folio(), which backs up subpages to a contiguous
range of shmem indices and returns the base handle plus the number of
subpages actually backed up (@nr_backed). On full success, free the
compound once at its native order -- no split_page(), no per-4K
refcount juggling.
A per-folio backup can't be made fully atomic under memory pressure:
ttm_backup_backup_folio() must allocate shmem folios before source
subpages can be released, so under true OOM any subpage may fail
while the rest of the compound is still live. Two mechanisms handle
this without regressing reclaim behaviour:
- alloc_gfp gets __GFP_NOMEMALLOC whenever order > 0 (cleared again
for order-0), so a high-order backup fails fast with -ENOMEM
instead of draining kernel reserves, leaving them for other
allocations under the same pressure.
- If ttm_backup_backup_folio() still returns a short @nr_backed with
a valid handle for the successfully-backed prefix, split the
source compound with ttm_pool_split_for_swap(), free the prefix as
order-0 pages (already safely in shmem), and retry the remaining
subpages at order 0, where __GFP_NOMEMALLOC is cleared and
reserves may be used as a last resort.
This preserves the original split-on-OOM fallback while keeping the
common case fragmentation-free, and preserves the "partial backup is
allowed" contract (shrunken is incremented per subpage backed up).
The restore-side leftover-page split in ttm_pool_restore_commit() is
left as-is: it's unreachable in practice and not worth complicating
the restore state machine to avoid.
Testing: the existing backup_fault_inject point only truncated
tt->num_pages, which never exercised the reactive split path above
since it never left a compound partially backed up. Wire fault
injection into ttm_backup_backup_folio() itself: past the first
subpage of a compound, synthesize a -ENOMEM in place of
shmem_read_folio_gfp() when should_fail() trips, producing the same
short @nr_pages_backed a real failure would and forcing
ttm_pool_backup() through the split-and-retry path. The fault_attr
stays private to ttm_pool.c; ttm_backup.c reaches it through
ttm_backup_fault_inject_folio(), declared in ttm_pool_internal.h.
While converting the writeback branch to operate on the whole folio,
the unlock condition after shmem_writeout() also changed from `if
(ret)` to `if (ret == AOP_WRITEPAGE_ACTIVATE)`, matching the actual
contract: shmem_writeout()/swap_writeout() only leave the folio locked
when returning AOP_WRITEPAGE_ACTIVATE; any other return (including a
hard error from arch_prepare_to_swap()) means the folio was already
unlocked internally. The old `if (ret)` check would have double-
unlocked in that hard-error case.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: b63d715b80 ("drm/ttm/pool, drm/ttm/tt: Provide a helper to shrink pages")
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260716201358.4086085-1-matthew.brost@intel.com
A recent change enabling compile testing of a Freescale dual-role
controller indirectly enabled a USB PHY driver to be built. That driver
in turn is missing a bunch of static keywords which results in warnings
like:
drivers/usb/phy/phy-fsl-usb.c:105:5: error: no previous prototype for 'write_ulpi' [-Werror=missing-prototypes]
105 | int write_ulpi(u8 addr, u8 data)
| ^~~~~~~~~~
which consequently breaks -Werror builds.
Add the missing static keywords.
Fixes: 0807c500a1 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable@vger.kernel.org # 3.0
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/4f9f5ff9-8eaa-4bd5-9331-37119f78e13f@sirena.org.uk
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260717154957.1853976-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX platform
and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers
-----BEGIN PGP SIGNATURE-----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=BN00
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX
platform and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers"
* tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
MAINTAINERS: Update maintainer and git tree for CIX SoC
ARM: Don't let ARMv5 platforms select USE_OF
MAINTAINERS: Update SpacemiT SoC git tree repository
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
arm64: tegra: Fix CPU1 node unit-address on Tegra264
arm64: tegra: Fix CPU compatible string to cortex-a78ae on Tegra234
MAINTAINERS: .mailmap: update Jens Wiklander's email address
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
arm64: tegra: Remove fallback compatible for GPCDMA
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b2149 ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2),
since those special offsets rely on cur_offset tracking the
previous partition's end. However, commit 1a31368bf9 ("mtd: add a flags
for partitions which should just leave smth. after them")
later added MTDPART_OFS_RETAIN (-3) for the static
partition table path without updating mtd_add_partition() to
also reject this value.
With offset=-3 passed via BLKPG, the RETAIN size calculation in
allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD
= parent_size + 3). If the underflow result does not appear to
leave enough space, allocate_partition() jumps to out_register via
goto, skipping erasesize initialization. This results in
erasesize=0, which triggers:
WARN_ON((!mtd->erasesize || !master->_erase) &&
!(mtd->flags & MTD_NO_ERASE))
in add_mtd_device(). If the underflow result appears to leave
enough space, a bogus partition size is calculated, but the
"out of reach" sanity check catches the invalid offset and
creates a disabled empty partition (offset=0, size=0) instead
of returning an error.
Fix this by adding MTDPART_OFS_RETAIN to the rejection list in
mtd_add_partition(), consistent with the existing handling of
APPEND and NXTBLK.
Fixes: 1a31368bf9 ("mtd: add a flags for partitions which should just leave smth. after them")
Signed-off-by: zhouminqiang <zhouminqiang2@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace the open-coded of_address_to_resource() plus devm_request_mem_region()
and devm_ioremap() sequence with a single devm_platform_ioremap_resource()
call, which folds the resource lookup, region reservation and mapping into
one step and returns an ERR_PTR on failure, checked with IS_ERR() and
propagated via PTR_ERR().
Switch IRQ acquisition from irq_of_parse_and_map() to platform_get_irq(),
which only retrieves the interrupt the OF/platform core has already set up
rather than transferring mapping ownership to the driver. Drop the now
unneeded of_irq.h include.
This is behaviorally equivalent: the driver already reserved the region
with devm_request_mem_region(), so the non-overlapping reg requirement of
devm_platform_ioremap_resource() was already satisfied.
Drop the now-unused regs_paddr / regs_size locals, which previously only
fed the open-coded request/ioremap calls. Keep the linux/of_address.h
include, as of_iomap() is still used elsewhere in the driver.
Built for PowerPC (mpc512x_defconfig + CONFIG_MTD_NAND_MPC5121_NFC) with
LLVM=1; drivers/mtd/nand/raw/mpc5121_nfc.o compiles cleanly.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mtdoops_notify_add() allocates oops_page_used when the configured MTD
device is registered. mtdoops_notify_remove() detaches from that device
but leaves the bitmap allocated. If the same MTD device is later
registered again, the add path allocates a new bitmap and overwrites the
old pointer, leaking one vmalloc allocation per remove/add cycle.
This is only visible when the backing MTD device can disappear and be
registered again while mtdoops remains loaded, so the usual static MTD
case does not expose it.
Free the bitmap after unregistering the dumper and flushing the pending
workers, then clear the pointer and page count before a later attach can
allocate fresh state. Clearing the pointer also keeps the module exit
path from freeing the same bitmap a second time after a remove event.
Fixes: be95745f01 ("mtd: mtdoops: keep track of used/unused pages in an array")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In mtdswap_add_mtd(), debugfs setup failure after successful blktrans
registration can free mbd_dev twice.
add_mtd_blktrans_dev() initializes the blktrans device reference and
publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the
disk down and drops the blktrans reference; when that reference reaches
zero, blktrans_dev_release() frees the mtd_blktrans_dev.
The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell
through the common cleanup label and called kfree(mbd_dev) again. Clear
the local pointer after deregistration so the common cleanup can still
release the mtdswap state without freeing the blktrans object twice.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: e8e3edb95c ("mtd: create per-device and module-scope debugfs entries")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The AFS v2 parser uses footer[8] to locate the image information block
inside the current erase block, then uses the image information
region_count to walk entries from a fixed local array. The footer offset
and region count come from flash contents and are not checked against the
erase block or the local image-info array before use.
Reject v2 entries whose image information offset would underflow the
erase block calculation, and reject region counts that cannot fit in the
local image-info array before walking region entries.
Fixes: b7cf5e2830 ("mtd: afs: add v2 partition parsing")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
intel_dg_mtd_probe() allocates region names before enabling runtime PM
and before calling pm_runtime_resume_and_get().
If kasprintf() fails while building a region name, the error path jumps
to err, which calls pm_runtime_put(). At that point there has not been a
successful pm_runtime_resume_and_get() call to balance, so the runtime PM
usage count can underflow.
Jump to err_norpm from the kasprintf() failure path, as the runtime PM
reference has not been acquired yet.
Fixes: 779c59274d ("mtd: intel-dg: Fix accessing regions before setting nregions")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Defining a static array in a header results in each .c file that
includes the header (here: drivers/memory/omap-gpmc.c and
drivers/mtd/nand/raw/omap2.c) to contain a copy of that array when
compiled to an object file.
With sizeof(struct of_device_id[3]) ≥ 588 having omap_nand_ids[] twice
just to do two string comparisons is quite some bloat. So move
omap_nand_ids[] to the nand driver which actually needs that array for
its module meta data and do the compatible check by hand.
bloat-o-meter reports for drivers/memory/omap-gpmc.o (ARCH=arm):
add/remove: 1/2 grow/shrink: 1/0 up/down: 28/-588 (-560)
Function old new delta
gpmc_probe_generic_child 2108 2136 +28
omap_nand_ids 588 - -588
Total: Before=18114, After=17554, chg -3.09%
(drivers/mtd/nand/raw/omap2.o doesn't change).
This allows to drop <linux/mod_devicetable.h> from
include/linux/platform_data/mtd-nand-omap2.h (which is my original
motivation for this change). Note that this header isn't needed in the
two drivers because omap-gpmc.c doesn't use any device id struct and for
the nand driver omap2.c of_device_id is already provided via
<linux/platform_device.h>.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Without a full-ID entry, the non-ONFI TC58NVG1S3H falls back to the
generic 0xda extended-ID decoding. It is therefore identified only as a
generic 256 MiB Toshiba NAND. Without a model-specific interface
configuration, the core leaves it in the conservative reset timing mode.
Add its full five-byte ID with the datasheet geometry, OOB size and ECC
requirements. Its interface timings match the mode-4-derived profile
already used by the related TH58NVG2S3HBAI4 and TH58NVG3S0HBAI4, so
share that profile and select it for the new model.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The Realtek external ECC engine driver has an OF match table wired into
its platform driver, but the table is not exported with
MODULE_DEVICE_TABLE().
When the driver is built as a module, the missing OF module alias
prevents automatic module loading from the compatible string.
Add the missing MODULE_DEVICE_TABLE() entry.
Fixes: 3148d0e5b1 ("mtd: nand: realtek-ecc: Add Realtek external ECC engine support")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
MDM9607 has QPIC v1.5 that supports the OP_PAGE_READ_ONFI_READ command, but
is missing the rest of the hardware changes in QPIC v2. Add the new
qcom,mdm9607-nand compatible and set it to use has_onfi_read_op without
also setting qpic_version2.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
QPIC v1.5 requires using the OP_PAGE_READ_ONFI_READ command, but is missing
the rest of the hardware changes that are currently covered by the QPIC v2
(qpic_version2) check in the driver. Split that into an extra
has_onfi_read_op feature flag so it can be separately enabled.
No functional change.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some SoCs (e.g. MDM9607, SDX55) have only a single separately controllable
clock for the NAND controller. The actual clocks in the hardware are
managed by the firmware and turned on all together when needed. In this
case, there is no separate "aon" clock that can be described in the device
tree from the OS point of view.
Make the second "aon" clock optional to avoid an error when it is missing.
For platforms that really need it, the dt-bindings are responsible for
validating that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add the qcom,mdm9607-nand compatible for the QPIC NAND controller used
inside the MDM9607 SoC.
On MDM9607 and other recent SoCs, the QPIC hardware requires 3 clocks
(core, aon, ahb). However, access to these clocks is restricted to the RPM
firmware that controls the shared power resources for the whole SoC. The
clocks cannot be controlled separately, for the OS view of the hardware
there is only a single RPM_SMD_QPIC_CLK clock that implicitly enables all
of the 3 clocks. The only exception to this are some IPQ* SoC that are not
using RPM, there the clocks are directly controlled by the kernel via the
clock controller (GCC). Require only one clock in the dt-bindings for
MDM9607 to avoid having to define dummy clock entries.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add front compatible string "fsl,ls1021aqds-fpga" for on boards FPGA chip
and remove unused property bank-width and device-width, which used for
MTD devices and FPGA is not a MTD devices.
Fix below CHECK_DTBS warning:
rch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: 'oneOf' conditional failed, one must be fixed:
'bank-width', 'device-width' do not match any of the regexes: '^gpio@[0-9a-f]+$', '^mdio-mux@[a-f0-9,]+$', '^pinctrl-[0-9]+$'
/home/lizhi/source/linux-upstream-pci-ep-arm/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0:compatible: 'oneOf' conditional failed, one must be fixed:
['simple-mfd'] is too short
arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'bank-width', 'compatible', 'device-width', 'mdio-mux@54', 'ranges', 'reg' were unexpected)
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add fsl,ls1021aqds-fpga compatible string for ls1021a qds's FPGA on board
controller chips, which connect CFI interface.
With following patches to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: 'oneOf' conditional failed, one must be fixed:
'bank-width', 'device-width' do not match any of the regexes: '^gpio@[0-9a-f]+$', '^mdio-mux@[a-f0-9,]+$', '^pinctrl-[0-9]+$'
/home/lizhi/source/linux-upstream-pci-ep-arm/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0:compatible: 'oneOf' conditional failed, one must be fixed:
['simple-mfd'] is too short
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
- Enable CONFIG_VPA_PMU to be used with KVM
- Initialize starttime at boot for native accounting
- Set CPU_FTR_P11_PVR for Power11 and later processors
- fix memory leak on krealloc failure in papr_init
- Misc fixes and cleanups
Thanks to:
Amit Machhiwal, Christophe Leroy (CS GROUP), Ethan Nelson-Moore, Gautam
Menghani, Harsh Prateek Bora, Junrui Luo, Mukesh Kumar Chaurasiya (IBM), Ritesh
Harjani (IBM), Rosen Penev, Shrikanth Hegde, Thorsten Blum, Yuhao Jiang
-----BEGIN PGP SIGNATURE-----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=jI4x
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Enable CONFIG_VPA_PMU to be used with KVM
- Initialize starttime at boot for native accounting
- Set CPU_FTR_P11_PVR for Power11 and later processors
- fix memory leak on krealloc failure in papr_init
- Misc fixes and cleanups
Thanks to Amit Machhiwal, Christophe Leroy (CS GROUP), Ethan
Nelson-Moore, Gautam Menghani, Harsh Prateek Bora, Junrui Luo, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Rosen Penev, Shrikanth
Hegde, Thorsten Blum, and Yuhao Jiang
* tag 'powerpc-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Remove dead non-preemption code
powerpc/dt_cpu_ftrs: Set CPU_FTR_P11_PVR for Power11 and later processors
powerpc/pseries: fix memory leak on krealloc failure in papr_init
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
powerpc/vtime: Initialize starttime at boot for native accounting
powerpc/85xx: Add fsl,ifc to common device ids
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
powerpc/pseries/Kconfig: Enable CONFIG_VPA_PMU to be used with KVM
knav_queue_probe() creates the global qmss debugfs file whose show
callback reads the global knav_qdev state. knav_queue_remove() tears
down the queue manager resources but leaves the debugfs file published.
Save the debugfs dentry in struct knav_device and remove it during
teardown before the resources used by the show callback are released.
While touching the debugfs_create_file() call, spell the unchanged read-
only file mode as 0444.
Fixes: 41f93af900 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260706144706.96313-1-pengpeng@iscas.ac.cn
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove the 'supports-clkreq' property from PCIe1 as the standard PCIe
slot on i.MX943 EVK may not have CLKREQ# signal wired, causing
compatibility issues with some PCIe cards.
Fixes: 9a8f11f6f7 ("arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
On the i.MX91 9x9 QSB, CAN1 and MICFIL share pins. A TMUX1574RSVR
analog mux controls the routing: when SEL is driven high, CAN1 is
selected; when SEL is driven low, MICFIL is selected. By default,
SEL is kept low.
To enable CAN1, SEL must be driven high. This is done via the can_fun
function defined in the pinctrl-gpiomux node. CAN1 uses the
TJA1057GT/3 PHY.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add device tree support for the Variscite Symphony carrier board with
the VAR-SOM-MX8 QuadMax system on module.
The Symphony board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart, SPI and I2C interfaces
- GPIO Expanders
- RTC module
- TPM module
- CAN peripherals
- PCIE support
Link: https://variscite.com/carrier-boards/symphony-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add device tree support for the Variscite VAR-SOM-MX8 QuadMax
system on module.
This SOM is designed to be used with various carrier boards.
The module includes:
- NXP i.MX8 QuadMax MPU processor
- Up to 8GB of LPDDR4 memory
- Up to 128GB of eMMC storage memory
- Integrated 10/100/1000 Mbps Ethernet Transceiver
- Codec audio WM8904
- WIFI6 dual-band 802.11ax/ac/a/b/g/n with optional 802.15.4 and Bluetooth
Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.
Link: https://variscite.com/system-on-module-som/i-mx-8/i-mx-8-quadmax-quadplus/var-som-mx8/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add DT compatible strings for Variscite VAR-SOM-MX8 QuadMax SoM and
Variscite Symphony development carrier Board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
In atomic_check, damage handling is not fully evaluated. Another
atomic_check helper could trigger a full modeset and thus invalidate
damage clips.
Allocation of the request/response buffers in appletbdrm depends on
correct damage information. Otherwise it might allocate incorrectly
sized buffers. Allocate the buffers in the driver's begin_fb_access
helper. It runs early during the commit when damage clipping has been
fully evaluated.
v5:
- pass plane state as the old damage-iterator state
v2:
- allocate before drm_gem_begin_shadow_fb_access() to avoid leak on error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Aditya Garg <gargaditya08@proton.me>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260610152505.260172-6-tzimmermann@suse.de
Disable the internal SNVS RTC on the Symphony carrier board and use the
external DS1337 RTC instead.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Enable PWM1 on the Symphony carrier board and add the corresponding
pinctrl configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Keep the RGB_SEL line driven low on the Symphony carrier board.
This avoids leaving the line floating and ensures the board remains in
the expected display configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Mark the Symphony carrier board GPIO keys and capacitive touchscreen as
wakeup sources.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Enable I2C4 on the Symphony carrier and add pinctrl configuration,
including GPIO-based bus recovery support.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add support for the TPM2 device on the VAR-SOM Symphony carrier board.
The ST33K TPM2 is connected over I2C, and A PCA6408 GPIO expander is
used to control the reset signal required to release the TPM from reset.
Add the PCA6408 GPIO expander and the ST33K TPM2 device node.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Enable the FlexSPI controller on the VAR-SOM-MX8MN and add the
corresponding pin multiplexing configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
