While svdm_consume_modes() already prevents mode_data.altmodes from
exceeding ALTMODE_DISCOVERY_MAX during SVDM discovery, defensively
bounding array iteration indices against ALTMODE_DISCOVERY_MAX in altmode
registration and unregistration helpers guarantees protection against
out-of-bounds accesses in the event of memory corruption.
Ensure that tcpm_register_plug_altmodes() is also bounded alongside
tcpm_register_partner_altmodes() and tcpm_unregister_altmodes.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260629225729.2749896-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All types in `bindings` implement `Zeroable` if they can. This enables
using `pin_init::zeroed()` for `usb_device_id` initialization instead
of relying on `..unsafe { MaybeUninit::zeroed().assume_init() }`.
This change improves readability and removes unnecessary unsafe blocks.
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260625224927.404258-1-nico.antinori.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ucsi_register() creates per-instance debugfs entries, but
ucsi_unregister() keeps them around until ucsi_destroy().
Drivers like ucsi_glink that unregister/register the same UCSI
instance across remoteproc restart then try to create an already
existing debugfs directory and log:
debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi'
Unregister debugfs entries as part of ucsi_unregister(), and
clear ucsi->debugfs after freeing it so repeated unregister
paths remain safe.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Fixes: df0383ffad ("usb: typec: ucsi: Add debugfs for ucsi commands")
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E80100 CRD
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611-usci-unregister-debugfs-v1-1-f4a518a94f27@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260525074857.30816-1-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead.
Fixes: 812d47889a ("gpio/mvebu: Use irq_domain_add_linear")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260707232358.1218077-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Rename the local variable 'bAllow' to 'allow' in
rtw_cmd_filter() to fix a checkpatch CamelCase warning.
Signed-off-by: Anirban Bose <boses156@gmail.com>
Link: https://patch.msgid.link/20260708061904.4136-1-boses156@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to Linux kernel coding style.
Reported by checkpatch:
WARNING: please, no space before tabs
Struct definitions in drivers/staging/rtl8723bs/include/wifi.h had
inconsistent spacing.
Signed-off-by: David C.C.M. Gall <david.ccm.gall@googlemail.com>
Link: https://patch.msgid.link/ak4kZZ3CQE69cjSm@fudgebox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 302c570bf3 ("usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260706145312.37260-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VDO() second parameter is VDM type (bit 15): 1 for SVDM, 0 for UVDM.
Using 'vdo ? 2 : 1' corrupts SVID low bit when vdo is non-NULL
(2 << 15 = BIT(16)). Enter Mode is always SVDM, hardcode to 1.
Fixes: 8face9aa57 ("usb: typec: Add parameter for the VDO to typec_altmode_enter()")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260604105059.18750-1-andyshrk@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a Dell XPS 13 9360 (BIOS 2.21.0), entering system suspend (deep/S3)
races a pending UCSI connector-change worker against the ACPI EC teardown.
The worker evaluates the UCSI _DSM (GET_CONNECTOR_STATUS), whose AML
accesses the Embedded Controller. By that point the ACPI EC has already
been stopped for suspend, so the EC address space handler rejects the
access with AE_BAD_PARAMETER, aborting the AML and failing the connector
query:
[22314.689495] ACPI: EC: interrupt blocked
[22314.711981] ACPI: PM: Preparing to enter system sleep state S3
[22314.743260] ACPI: EC: event blocked
[22314.743265] ACPI: EC: EC stopped
[22314.743267] ACPI: PM: Saving platform NVS memory
[22314.744241] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20260408/evregion-303)
[22314.744432] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECW1 due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.744673] ACPI Error: Aborting method \ECWB due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745201] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_BAD_PARAMETER) (20260408/psparse-543)
[22314.745394] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f rev:1 func:1 (0x1001)
[22314.745414] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 1
[22314.745424] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-5)
ucsi_acpi implements a resume callback but no suspend callback, so nothing
cancels the connector-change work before the firmware/EC is torn down.
Add a `ucsi_suspend()` core helper that cancels the pending init and
connector-change work, and wire it into ucsi_acpi's PM ops. The connector
state is re-read on resume by `ucsi_resume()`, so cancelling the work loses
nothing.
Fixes: 4e3a50293c ("usb: typec: ucsi: acpi: Implement resume callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Assisted-by: Claude Opus 4.8
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260703110738.8457-2-pmenzel@molgen.mpg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_power_delivery_find() wraps class_find_device_by_name(). That helper
returns a device reference that must be released by the caller.
select_usb_power_delivery_store() only needs this reference while calling
the pd_set callback. Drop it once the callback returns. Otherwise the sysfs
write can pin the selected USB Power Delivery object and prevent it from
being released on unregister.
Fixes: a7cff92f06 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable <stable@kernel.org>
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260702191329.2648043-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The old of_drm_get_panel_orientation() function was replaced by the
drm_of_get_panel_orientation() in the core DRM OF helpers. Replace all
uses of the old helper and remove it.
Changes in v5:
- also convert r63419 panel
Changes in v4:
- also convert anbernic, chipone and ili9488 panels
Changes in v2:
- include drm_of.h in all drivers to make sure the new symbol is defined
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260701121055.192475-4-tzimmermann@suse.de
Commit 6bebd9b777 ("usb: typec: ps883x: Rework ps883x_set()") introduced
two regressions:
1. The CONN_STATUS_0_USB_3_1_CONNECTED bit is mistakenly written to the
wrong configuration register (cfg1 instead of cfg0). This breaks USB3
when using USB3+DP adapters.
2. The switch-case fallthrough block is inverted: Currently,
TYPEC_DP_STATE_C (DP-only) inherits the USB3 configuration, while
TYPEC_DP_STATE_D (DP+USB3) is missing the necessary DP sink flags.
Fix these by writing the USB3 bit to the correct register and swapping the
case statement order so both states get their correct bits assigned.
Cc: stable <stable@kernel.org>
Fixes: 6bebd9b777 ("usb: typec: ps883x: Rework ps883x_set()")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260601-ps883x-usb3dp-fixes-v1-1-d19bec3a6d26@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 602cb14e31 ("pinctrl: qcom: x1e80100: Bypass PDC
wakeup parent for now").
PDC interrupts no more break GPIOs PDC irqchip is updated to work for
pass through or secondary mode. Update nwakeirq_map to reflect the GPIO
to PDC irq map size.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://patch.msgid.link/20260707-hamoa_pdc_v3-v4-6-dfd1f4a3ae89@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
PDC needs to acknowledge incoming GPIO interrupts to clear the latched
interrupt status in secondary mode of PDC. For level-triggered IRQs this
happens automatically in irq_eoi() but for edge-triggered IRQs this needs
to happen as early as possible in the IRQ handler.
Implement this by using handle_fasteoi_ack_irq() as IRQ handler in this
situation and forward the irq_ack() callback to the parent IRQ chip.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://patch.msgid.link/20260707-hamoa_pdc_v3-v4-5-dfd1f4a3ae89@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
A device-tree panel node can specify the panel's rotation in steps
of 90 degrees. Set the DRM connector orientation accordingly. Use
UNKNOWN for the orientation if the field is missing or invalid.
v3:
- read the orientation with drm_of_get_panel_orientation() (Thierry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260701121055.192475-3-tzimmermann@suse.de
Implement drm_of_get_panel_orientation() to retrieve a panel's
rotation property as enum drm_panel_orientation. The code has
been taken from of_drm_get_panel_orientation(), so convert that
helper over. Callers of the old helper can be converted as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260701121055.192475-2-tzimmermann@suse.de
When a USB device with active stream endpoints is disconnected,
xhci_free_streams() is called from the hub_event workqueue to
free the stream resources. It calls xhci_free_stream_info()
while holding xhci->lock with irqs disabled.
xhci_free_stream_info() invokes xhci_free_stream_ctx(), which
calls dma_free_coherent() for large stream context arrays.
dma_free_coherent() can sleep (e.g. via vunmap), triggering
a BUG when called from atomic context.
Call trace:
dma_free_attrs+0x174/0x220
xhci_free_stream_info+0xd0/0x11c
xhci_free_streams+0x278/0x37c
usb_free_streams+0x98/0xc0
usb_unbind_interface+0x1b8/0x2f8
device_release_driver_internal+0x1d4/0x2cc
device_release_driver+0x18/0x28
bus_remove_device+0x160/0x1a4
device_del+0x1ec/0x350
usb_disable_device+0x98/0x214
usb_disconnect+0xf0/0x35c
hub_event+0xab4/0x19ec
process_one_work+0x278/0x63c
Fix this by saving the stream_info pointers and clearing the
ep references under the lock, then calling xhci_free_stream_info()
outside the lock where sleeping is allowed.
Fixes: 8df75f42f8 ("USB: xhci: Add memory allocation for USB3 bulk streams.")
Cc: stable <stable@kernel.org>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260703144033.483286-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction.
Fixes: de66754e9f ("xhci: sideband: add initial api to register a secondary interrupter entity")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260703144033.483286-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The udc structure acts as the management structure for the gadget,
but their lifecycles are decoupled. A race condition exists where
usb_del_gadget() frees the udc memory (e.g., via mode-switch work)
while gadget_match_driver() concurrently accesses the freed udc memory
(e.g., via configfs), causing a Use-After-Free (UAF) that triggers a
NULL pointer dereference when the freed memory is zeroed:
[39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140
[39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60
...
[39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8
[39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140
[39430.931308][ T1171] configfs_write_iter+0xec/0x134
[39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode
[39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c
[39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664
Fix this by ensuring the udc structure remains allocated until the
gadget is released. To achieve this, introduce a new
usb_gadget_release() routine to the core. When the gadget is added,
usb_add_gadget() stores the gadget's release routine in the udc
structure and takes a reference to the udc. When the gadget is
released, usb_gadget_release() drops the reference to the udc and
then calls the gadget's release routine.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260625073705.803880-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls
dwc3_disconnect_gadget(). For async callbacks that helper only uses
plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback
still runs with IRQs disabled and any sleepable callback trips Lockdep.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the dwc3_gadget_suspend() ->
dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and
Lockdep reported:
BUG: sleeping function called from invalid context
gadget_disconnect+0x21/0x39 [vuln_msv]
dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]
Keep the disconnect callback selection in one common helper, but add a
sleepable suspend-side wrapper which snapshots the callback under
dwc->lock and then runs it after spin_unlock_irqrestore(). The regular
event path still uses the existing spin_unlock()/spin_lock() window.
Fixes: c8540870af ("usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()")
Cc: stable <stable@kernel.org>
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260612052005.3849659-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sl811h_probe() enables the HCD controller device as a wakeup source after
usb_add_hcd() succeeds, but sl811h_remove() removes the HCD and releases
the driver resources without disabling that wakeup source.
Disable controller wakeup after usb_remove_hcd() and before usb_put_hcd()
so the wakeup source object is detached while the controller device pointer
is still available.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 3c9740a117 ("usb: hcd: move controller wakeup setting initialization to individual driver")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260701121625.96815-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
anx7411_i2c_probe() enables runtime PM before returning successfully, but
anx7411_i2c_remove() tears down the Type-C partner state, workqueue, dummy
I2C device, mux, switch and port without disabling runtime PM.
Use devm_pm_runtime_enable() so runtime PM is disabled automatically on
driver detach. Since devres action registration can fail, route that
failure through the existing probe unwind path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: fe6d8a9c8e ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260701114006.75738-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc3_ulpi_setup() calls the register read and write calls with
dwc3->regs when both these calls take the dwc3 structure directly.
Chnage these two calls to fix the following sparse warning, and
possibly a nasty bug in the dwc3_ulpi_setup() code:
drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs
drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs
Cc: stable <stable@kernel.org>
Fixes: 9accc68b1c ("usb: dwc3: Add dwc pointer to dwc3_readl/writel")
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260703162033.2847599-1-ben.dooks@codethink.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 3295f1b866 ("usb: misc: uss720: check for incompatible versions of the Belkin F5U002")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://patch.msgid.link/20260706151049.63470-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://patch.msgid.link/20260708-usb-gadget-rndis-v1-2-e77e026dcc6a@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add variable representations for BufLength and BufOffset in
rndis_query_response(), and perform a length check on them.
This is identical to how rndis_set_response() handles these parameters.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://patch.msgid.link/20260708-usb-gadget-rndis-v1-1-e77e026dcc6a@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed.
Fixes: 8de9840265 ("[PATCH] USB: Fix USB suspend/resume crasher (#2)")
Fixes: e9df41c5c5 ("USB: make HCDs responsible for managing endpoint queues")
Fixes: 7d50195f6c ("usb: host: Faraday fotg210-hcd driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260630071419.349161-1-dawei.feng@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1892bf9067 ("USB: usb-storage: Fix use of bitfields for
hardware data in ene_ub6250.c") converted the media status fields from
bitfields to bit masks.
The original ene_transport() test called ene_init() only when neither
media type was ready:
!(sd_ready || ms_ready)
The converted test became:
!sd_ready || ms_ready
This is not equivalent. Restore the original semantics by testing that
both ready bits are clear before calling ene_init().
Fixes: 1892bf9067 ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/F42641386E32404F+20260626070607.4119527-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch.
Fixes: e8d5f92b8d ("usb: gadget: function: printer: fix use-after-free in __lock_acquire")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/80295742B820DA9B+20260626064617.4090626-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Call trace:
vep_dequeue+0x1c/0xe4 (P)
usb_ep_dequeue+0x14/0x20
ffs_aio_cancel+0x24/0x34
__arm64_sys_io_cancel+0xb0/0x124
do_el0_svc+0x68/0x100
el0_svc+0x18/0x5c
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
Assisted-by: opencode:openai/gpt-5.5
Cc: stable <stable@kernel.org>
Fixes: b6a0ca1118 ("usbip: vudc: Add UDC specific ops")
Reviewed-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260626-usbip-vudc-deque-fix-v3-1-98c2dc4d6a48@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB devices running at SuperSpeedPlus report "10000" or "20000" in
their sysfs speed attribute. usbip currently maps only "5000" to
USB_SPEED_SUPER, so a SuperSpeedPlus device is imported as
USB_SPEED_UNKNOWN.
The attach request is then rejected by vhci_hcd:
vhci_hcd: Failed attach request for unsupported USB speed: UNKNOWN
Map the SuperSpeedPlus sysfs speed values to USB_SPEED_SUPER_PLUS, use
the SuperSpeed VHCI hub for SuperSpeedPlus devices, and recognize the
gadget current_speed string used by the kernel.
Fixes: b2316645ca ("usb: show speed "10000" in sysfs for USB 3.1 SuperSpeedPlus devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/00C828F338E43447+20260617020613.199086-1-chenyichong@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM
command hold the 32-bit Alternate Mode Specific (AMSpecific) field.
For DisplayPort Alternate Mode, this field must contain the full
32-bit DisplayPort configuration VDO payload that the OPM wants the
connector to operate in, rather than just the pin assignment value.
This AMSpecific value follows the DisplayPort Configurations defined
in the DisplayPort Alt Mode on USB Type-C Specification v2.1a,
Table 5-13: SOP DisplayPort Configurations.
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Madhu M <madhu.m@intel.com>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ravi Hothi <ravi.hothi@oss.qualcomm.com> says:
This series adds audio support for the Qualcomm Eliza SoC. Eliza uses
the same LPASS macro codec hardware as SM8550, so the existing SM8550
fallback compatible is reused for all four macro codecs (RX, TX, VA,
WSA). The sound card is compatible with the SM8450 generation machine
driver.
Patch 1 documents the Eliza LPASS macro codec compatibles in the
dt-bindings for RX, TX, VA and WSA macros.
Patch 2 documents the Eliza sound card compatible.
Patch 3 adds the Eliza sound card entry to the machine driver.
Link: https://patch.msgid.link/20260703073434.2589657-1-ravi.hothi@oss.qualcomm.com
Add bindings for Eliza sound card, which is compatible with
the existing SM8450.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703073434.2589657-3-ravi.hothi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm Eliza LPASS RX, TX, VA and WSA macro codecs,
which are compatible with the existing SM8550 generation.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703073434.2589657-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace manual bitfield manipulations with FIELD_MODIFY() and define
constants with BIT() and GENMASK() to make code more readable.
Also, remove offset and shift constants for clarity in use of bitfield
macros.
Signed-off-by: Bryan B. Lima <bblima@usp.br>
Co-developed-by: Gustavo S. Correa <gustavoscorrea@usp.br>
Signed-off-by: Gustavo S. Correa <gustavoscorrea@usp.br>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260701010802.99029-1-bblima@usp.br
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv->zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as well.
The original code used a three step process to cleanup:
1. Call thermal_zone_device_unregister() to cleanup.
2. Set priv->zone to an error pointer to preserve the error code.
3. Set priv->zone to NULL to avoid a second call to
thermal_zone_device_unregister() in the rcar_thermal_remove()
function.
Now we can just do a direct goto error_unregister and rcar_thermal_remove()
handles the cleanup properly.
Fixes: bbcf90c064 ("thermal: Explicitly enable non-changing thermal zone devices")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/aj5WnseULiwgmlWv@stanley.mountain
The bytes_sent and bytes_rcvd members of structs asyncppp and syncppp
are not used. Drop them.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260702060420.95023-1-jirislaby@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The per-error decode in tegra30_mc_handle_irq() dereferences
mc->soc->regs unconditionally. This 'regs' structure is optional and is
only used for decoding and logging MC error interrupts. The rest of the
MC functionality does not depend on it.
When adding support for the Tegra238 SoC, the 'regs' structure was
initially omitted because it is only used for error logging. We found
that this resulted in a NULL pointer dereference in IRQ context, causing
a crash when an MC error interrupt fired. Although existing upstream
devices will not hit this condition because 'regs' is present, guard
against it to improve the robustness of the driver.
Skip the decode and just clear the interrupt when mc_regs is NULL. This
bypasses the error interrupt logging while keeping the remaining MC
functionality intact.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://patch.msgid.link/20260703045653.395498-1-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add support for representing each memory-controller instance (one
per NUMA node / socket) as its own interconnect (ICC) provider,
with its own MC client nodes, to match the hardware topology on
multi-socket Tegra SoCs.
Use the NUMA node ID to make client IDs globally unique across
per-socket providers, since the ICC framework allocates node IDs
from a single global IDR. Per-socket MC and EMC node names are
also derived from dev_name() so they match the corresponding
debugfs subdirectory. On single-socket platforms (NUMA_NO_NODE)
the existing client IDs and node-name strings are preserved.
Each socket's MC and EMC therefore get their own debugfs
subdirectory under /sys/kernel/debug/{mc,emc}/. The parent
directories are created on first probe.
Bandwidth requests from MC clients in a socket are routed to
that socket's local BPMP.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260626131423.3986998-1-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
ipu7_resume() calls pm_runtime_get_sync() before resuming the device.
If the runtime PM resume fails, the usage count remains incremented, but
the error path returns without dropping the reference.
Use pm_runtime_resume_and_get() instead, which balances the usage count
on failure and avoids the leak. Keep returning 0 on error, as resume
callbacks should not propagate failures to the PM core, matching the
behaviour of the ipu6 driver.
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
ipu7_init_fw_code_region_by_sys() calls pm_runtime_get_sync() before
accessing the firmware code region. If resuming the device fails,
pm_runtime_get_sync() leaves the runtime PM usage count incremented,
but the error path returns without dropping the reference.
Use pm_runtime_resume_and_get() instead, which balances the usage count
automatically on failure and avoids the leak.
The ipu6 driver uses pm_runtime_resume_and_get() in the equivalent
location.
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Vidhu Sarwal <vidhu.linux@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Write value for auto-exposure into correct register REG_BCRM_EXPOSURE_AUTO_RW
instead of wrong register REG_BCRM_WHITE_BALANCE_AUTO_RW.
Fixes: 0a7af87291 ("media: i2c: Add support for alvium camera")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The IBP project is an DFI platform with a fixed audio
configuration consisting of headset(headphone and mic-in).
The audio routing and pin assignments are defined according to
the board-level hardware design and are not intended to be
dynamically changed.
Signed-off-by: Leo Tsai <antivirus621@gmail.com>
Link: https://patch.msgid.link/20260708035552.44429-1-antivirus621@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ctl_open() unconditionally overwrites the return value of
snd_card_file_add() with -ENODEV on failure, discarding the actual
error code.
Fix this by directly returning the original error code returned by
snd_card_file_add() (e.g. -ENOMEM or -ENODEV). This behavior is
consistent with the error handling used in other functions such as
snd_mixer_oss_open(), snd_hwdep_open(), snd_pcm_oss_open(), and others.
There is no functional change other than the returned error code in this
failure path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260708023540.6962-1-phucduc.bui@gmail.com
