We have been running with commit root csums enabled for some time and
have noticed a slight uptick in zero csum errors. Investigating those
revealed that they were same transaction reads of extents that were just
relocated, but the extent map generation was long ago.
It turns out that relocation intentionally does not update the extent
generation (replace_file_extents()), but must write a new csum since the
data has moved, so we must account for this with commit root csum reading.
Luckily this is a short lived condition: after the relocation transaction
the commit root will once again have the csum. So we can add a generic
fallback to the lookup to try again with the transaction csum root.
Fixes: f07b855c56 ("btrfs: try to search for data csums in commit root")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have an unexpected reloc_root for our root, we jump to the out label
but never drop the reference we obtained for root, resulting in a leak.
Add a missing btrfs_put_root() call.
Fixes: 24213fa46c ("btrfs: do proper error handling in merge_reloc_roots")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected.
Reported-by: Weiming Shi <bestswngs@gmail.com>
Fixes: 5b0e95bf60 ("Btrfs: inline checksums into the disk free space cache")
Link: https://lore.kernel.org/linux-btrfs/CAPpSM+RMPByMCKXvM5QFKToxsyNccfuFLWMdD0mfd0wh2Ja62w@mail.gmail.com/
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to abort the transaction if we failed to set or delete a
property, as we haven't done any change. However we need to abort if we
set a property or delete a property and then fail to update the inode
item, as that would leave the inode's state in subvolume tree
inconsistent.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We set the xattr and then attempt to apply the property. If the apply
fails we then attempt to delete the xattr to avoid an inconsistency.
However we don't verify if the deletion succeed, so if it fails we
leave an inconsistency between the state in the btree and the in-memory
inode.
Address this by validating first if we can apply the property, then set
the xattr, then apply the property, and this last step should not fail
since the validation succeeded before - assert that it does not fail but
leave code to attempt to delete the xattr if it happens, and then abort
the transaction only if the xattr delete failed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If wired LDAC, should be asserted when unused (pin is active-low), which
allows for synchronous DAC updates. This will be used to update all the
channels at the same time when adding buffer support.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add RESET pin GPIO support through an optional reset control, which is
local to the probe function. A reset pulse is manually generated after
the device is powered up.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Get and enable regulators for vdd, vlogic and vref input power pins. Vdd
is the input power supply, while vlogic powers the digital side. vref is
replacing vcc, which is being deprecated, but still supported. The value
of vref_mv is checked so that a device without internal voltage reference
cannot proceed without an explicit supply. For correct operation, vdd and
vlogic are required, then devm_regulator_get_enable() is used so the
driver can still work without them by using the stub/dummy regulators.
Error report uses dev_err_probe(), which helps debugging an init issue.
A small delay is added after the regulators are enabled to consider for
the power-up time (4.5 us).
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add supplies for VDD, VLOGIC and VREF input voltage pins. The vcc-supply
property is deprecated, once it does not really exist as none of the
devices describe any power input with that name. VCC is also misleading as
it sounds like the input power supply, but it is being used as an external
voltage reference, which should be called VREF. Certain devices require
vref-supply to be available once an internal reference voltage is absent.
For correct operation vdd and vlogic supplies are required.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add GPIO property for RESET, LDAC and GAIN pin. RESET is active-low, LDAC
is used to load DAC channels with values from input registers and GAIN
can double the voltage in output channels. The gain-gpios property is
not available to all supported parts. The adi,range-double property
indicates that GAIN pin is hardwired to high in case gain-gpios is not
set, otherwise it sets the initial value for the gain setting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add supplies for VDD, VLOGIC and VREF input voltage pins. The vcc-supply
property is deprecated, once it does not really exist as none of the
devices describe any power input with that name. VCC is also misleading as
it sounds like the input power supply, but it is being used as an external
voltage reference, which should be called VREF. Certain devices require
vref-supply to be available once an internal reference voltage is absent.
For correct operation vdd and vlogic supplies are required.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add GPIO property for RESET, LDAC and GAIN pin. RESET is active-low, LDAC
is used to load DAC channels with values from input registers and GAIN
can double the voltage in output channels. The gain-gpios property is
not available to all supported parts. The adi,range-double property
indicates that GAIN pin is hardwired to high in case gain-gpios is not
set, otherwise it sets the initial value for the gain setting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sashiko reports:
In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function
calculates the fan RPM using the tachometer value. However, it does not
check if the tachometer value is zero before performing the division.
If the hardware reports a tachometer value of 0 (which can happen due to
an extremely fast pulse, a stuck edge, or a hardware glitch), the
calculated tach_div evaluates to 0. The subsequent call to do_div() with
tach_div as the divisor triggers a divide-by-zero exception, leading to
a kernel panic.
Check the divisor against zero to fix the problem.
Fixes: 7e1449cd15 ("hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach")
Cc: Billy Tsai <billy_tsai@aspeedtech.com>
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
Commit 754bd2b4a0 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 754bd2b4a0 ("hwmon: (pmbus/core) Protect regulator operations with mutex")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Salih Erim is no longer with AMD to maintain the Xilinx AMS driver.
Replace Salih Erim with Sai Krishna Potthuri in the Xilinx AMS driver
MAINTAINERS entry for continued development and maintenance of the driver.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: "O'Griofa, Conall" <conall.ogriofa@amd.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The drivers explicitly set the .driver_data member of struct
spi_device_id to zero without relying on that value. Drop these unused
assignments.
While touching these arrays use named initializers for .name.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
spi_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The drivers explicitly set the .driver_data member of struct
spi_device_id to zero without relying on that value. Drop these unused
assignments.
While touching these arrays unify spacing and use named initializers for
.name.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There is one id entry that has an explicit assignment to .driver_data.
To make the intention clearer, assign BOSCH_UNKNOWN (which is also 0)
for all previously ids that had .driver_data = 0 implicitly before.
While touching all entries in this array, convert to named initializers.
This change is similar to commit e50856dc41 ("iio: accel: bmc150:
Explicitly set .driver_data") but cares for the driver's spi part
instead of i2c.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver supports a single chip variant only. Simplify the driver by
hard-coding the device properties instead of using the id_table's
abstraction for a single chip type and a lookup in a table with only one
entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
spi driver data is only set but never used, so the assignment can be
dropped. Also the spi id_table's .driver_data is unused and can be
dropped.
While touching the spi id_table modify it to use a named initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver only supports a single chip variant since it's birth in 2022.
Both the spi id_table and the of id_table are essentially unused (only
assigned to a write-only member in private data).
Hardcode the device name and then drop various unused stuff from the
driver. While touching the spi id_table assign .name using a named
initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver was introduced in 2020 and since then only supports a single
chip variant and .driver_data was unused from the start.
Drop the assignment for .driver_data and hardcode the device name
instead of doing a lookup in a table with only one entry. While touching
that array, make use of a named initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is a follow-up for commit f68afce8e8 ("iio: Initialize
i2c_device_id arrays using member names"). This previous commit missed
these two instances because these drivers didn't exist yet in the tree
where I prepared the respective patch.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add driver for the QST QMC5883L 3-Axis Magnetic Sensor
connected via i2c.
Signed-off-by: Siratul Islam <siratul.islam@linux.dev>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add devicetree binding for the QST QMC5883L 3-Axis Magnetic Sensor
connected via I2C.
Used enum so that more devices could use this binding
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Siratul Islam <siratul.islam@linux.dev>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Prefer 'u32' instead of 'unsigned int' for usage_id variable.
This matches expected callback API type and improves code clarity.
No functional change.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Prefer 'u32' instead of 'unsigned int' for usage_id variable.
This matches expected callback API type and improves code clarity.
No functional change.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Prefer 'u32' instead of 'unsigned int' for usage_id variable.
This matches expected callback API type and improves code clarity.
No functional change.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
propagate error.
Signed-off-by: Yash Suthar <yashsuthar983@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
fxls8962af_fifo_flush() transfers the sample count the device reports in
BUF_STATUS into an on-stack buffer sized for FXLS8962AF_FIFO_LENGTH (32)
samples, but the count is a 6-bit field (0..63) that is only checked for
zero. A device, or an attacker on the I2C/SPI bus, reporting 33..63
overflows the buffer by up to 186 bytes: a stack out-of-bounds write.
Clamp the count to FXLS8962AF_FIFO_LENGTH before the transfer, mirroring
the clamp already applied in fxls8962af_set_watermark(). Conforming
hardware reports at most that many samples and is unaffected.
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
__bmc150_accel_fifo_flush() transfers the frame count the device reports
in FIFO_STATUS into an on-stack buffer sized for BMC150_ACCEL_FIFO_LENGTH
(32) samples, but the count is masked to 7 bits (0..127) and the optional
caller budget does not bound the flush-all path. A device, or an attacker
on the I2C/SPI bus, reporting up to 127 frames overflows the buffer by up
to 570 bytes: a stack out-of-bounds write.
Clamp the count to BMC150_ACCEL_FIFO_LENGTH before the transfer, mirroring
the clamp already applied in bmc150_accel_set_watermark(). Conforming
hardware reports at most that many frames and is unaffected.
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Update the list of included headers in stk8ba50.c using
Include-What-You-Use (IWYU) tool, mainly to remove kernel.h
and add missing headers such as array_size.h, bitops.h,
dev_printk.h, etc.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Miao Li <limiao@kylinos.cn>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add comment to mutex per checkpatch.pl report. While we're at it, add
a comment to bool ok_to_ignore_lock.
No functional change.
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move the driver to use devm_* functions to automate resource
management and simplify error handling. This also allows removal
of the opt3001_remove() function.
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move driver to use guard(mutex)() macro, to facilitate automatic
locking/unlocking of resources. This modernizes the driver and
improves code style.
While at it, remove unnecessary gotos and return variables.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Switch driver to use dev_err_probe() to unify error messages generated
in *_probe() and probe path functions.
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Switch the driver to use local variables for struct device and struct
i2c_client and remove struct device member from struct opt3001, as the
former can be derived from struct client.
No functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move IIO device registration to the end of the probe() function to
follow standard driver teardown/setup ordering and improve driver
logic. Additionally, switch devm_iio_device_register() to its
unmanaged counterpart as current driver implementation mixes managed
and unmanaged resources, causing potential resource leaks.
Also, add iio_device_unregister() to remove() function to correctly
handle teardown.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The "st,adc-alt-channel" and "st,filter0-sync" properties are
documented as boolean flags. The legacy parser read them as integer
cells, unlike the child-node parser which already checks only for
presence.
Use presence and boolean helpers so both parsers follow the binding and
the property type checker no longer reports the flags.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add parenthesis and dashes.
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
AD_SIGMA_DELTA is a hidden tristate that can only be enabled by
selecting drivers (AD7124, AD7192, etc.), all of which require SPI.
This prevents compile-testing the library code directly with allmodconfig
or by manually enabling it with COMPILE_TEST.
Add a prompt string guarded by "if COMPILE_TEST" so the symbol becomes
directly selectable when COMPILE_TEST is set.
Also add an explicit "depends on SPI" since the ad_sigma_delta library
directly calls SPI core symbols such as spi_bus_lock(), spi_bus_unlock(),
and spi_sync_locked().
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Change hx711_reset_read() to accept the channel descriptor directly and
update its callers accordingly.
Split the existing HX711 channel-selection work into a small helper so a
later variant-specific change can add a matching helper without growing
hx711_reset_read() further.
No functional change.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tighten the scope of the loop variables in hx711_read() now that
trailing-pulse selection is already handled by the callers.
Also replace the 24-bit loop bound with a named constant while touching
the same code.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Separate the initial value assignments from the declarations in
hx711_read() and hx711_reset().
This is a small preparatory cleanup before the later loop-iterator and
variant-specific changes adjust the local variable layout in these
functions.
No functional change.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move the trailing-pulse selection out of hx711_read() and into its
callers.
This is a preparatory change so later variant-specific code can pass the
per-channel pulse count without adding a separate read path.
No functional change.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a per-variant static configuration structure and populate the IIO
device fields from it at probe time.
This is a preparatory change for adding support for more HX711-compatible
hardware variants without duplicating the probe-time setup.
No functional change for existing HX711 users.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
