On helper registration, the maximum number of expectations cannot go over
NF_CT_EXPECT_MAX_CNT (255), but zero can be specified then
nf_conntrack_expect_max applies. Turn zero into NF_CT_EXPECT_MAX_CNT
otherwise, expectation LRU eviction on insertion is disabled.
Moreover, expand this sanity check all expectation classes.
This max_expecy policy is only tunable since userspace helpers are
available, set Fixes: tag to the commit that adds such infrastructure.
Remove the check for p->max_expected given this field must always
be non-zero after this patch.
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Userspace passes '5000' in case user asks for 5 seconds.
Allowing for sub-second expectation lifetimes makes sense to me. so
fix up the kernel side instead of munging nft to send a value rounded
up to next second.
Also note that this violates nft convention of passing integers in
network byte order, but we can't change this anymore.
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Run expectation eviction if no helper is specified to deal with the
nft_ct expectation support.
Cap the maximum expectation limit per master conntrack to
NF_CT_EXPECT_MAX_CNT (255).
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Store master conntrack tuple in the expectation since exp->master might
refer to a different conntrack when accessed from rcu read side lock
area due to typesafe rcu rules.
Fixes: 02a3231b6d ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IRC Direct client-to-client requires plaintext. IRC over TLS should be
preferred, making this helper ineffective. Add a deprecation warning and
update the help text to better reflect that this is needed for the DCC
extension, not IRC itself.
PPTP is esoteric these days and it is the only helper that requires the
destroy callback in the conntrack helper API.
Removal would simplify the conntrack core.
Both helpers are IPv4 only.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In davinci_gpio_irq_setup(), after successfully creating an IRQ domain
with irq_domain_create_legacy(), a subsequent devm_kzalloc() failure
in the bank loop causes the function to return -ENOMEM without
removing the IRQ domain.
Unlike devm-managed resources, irq_domain_create_legacy() does not
auto-clean up on probe failure, so the domain is leaked.
Fix by calling irq_domain_remove() before returning on allocation
failure.
Fixes: b5cf3fd827 ("gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Link: https://patch.msgid.link/20260623023106.117229-1-fffsqian@163.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path.
Fixes: 11da905412 ("gpio: tegra: Fix offset of pinctrl calls")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260619152439.1239561-1-runyu.xiao@seu.edu.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Store tiling function pointer in struct intel_panic instead of struct
intel_framebuffer, and store struct intel_panic pointer instead of
struct intel_framebuffer pointer in struct drm_scanout_buffer private
member.
To make this happen, pass the tiling function pointer to panic setup
hook, and initialize sb->private in the hook for clarity.
This allows us to drop the dependency on struct intel_framebuffer from
i915 and xe panic code.
Note: It would be less verbose to have a typedef for the tiling function
pointer. However, there isn't a nice location for it that wouldn't also
increase header interdependencies.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/d97abae79db3437c617cd4cb6193ba017b3a8d78.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The driver explicitly sets the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop these
unused assignments.
While touching this array unify spacing and usage of commas and use
named initializers for .name.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Helge Deller <deller@gmx.de>
sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and
write(2): it opens the connection in the SYN. apparmor_socket_sendmsg()
only checks AA_MAY_SEND, so a profile that grants send but denies connect
lets a confined task open an outbound TCP/MPTCP connection that connect(2)
would have refused, bypassing connect mediation.
Mediate the implicit connect when MSG_FASTOPEN is set and a destination
is supplied. Add it to apparmor_socket_sendmsg() (not the shared
aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()
directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not
cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit.
Fixes: cf60af03ca ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: John Johansen <john.johansen@canonical.com>
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
The CAP1114 uses two control registers for LED output management and
requires two button status registers for touch input state reporting.
By default, channels CS8~CS14 operate as a single grouped block.
Set the corresponding register enable bit to enable these channels as
independent touch inputs. Note these channels share the input threshold
of the eighth entry, causing num_sensor_thresholds to differ from
num_channels.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-11-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
Add the compatible string for CAP1114, add its datasheet URL,
update the maximum of LED channel reg, and add constraint for
linux,keycodes.
Previously, the LED reg property had a default maximum of 7 for CAP1188.
With the addition of CAP1114, the default maximum is now 11.
An if-then constraint is added to limit the LED count for CAP1188.
Update description for microchip,input-threshold: CAP1114 only provides
eight threshold entries, which does not match its total channel count.
CAP1114 does not support microchip,signal-guard and
microchip,calib-sensitivity.
Add CAP1114 to the unsupported enum list.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-10-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Check of_property_present() before parsing microchip,calib-sensitivity
and microchip,signal-guard, so that models which do not support these
properties (e.g. CAP1114) skip the parsing entirely.
This prevents a potential buffer overflow in calib_sensitivities[8] and
signal_guard_inputs_mask when a model with more than 8 channels
(CAP1114 has 14) would otherwise call of_property_read_u32_array()
with num_channels as the element count.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-9-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend cap11xx_hw_model structure to support CAP1114 with
different register offsets and hardware characteristics:
- led_output_control_reg_base: different address on CAP1114
- sensor_input_reg_base: different address on CAP1114
- num_sensor_thresholds: separate value from num_channels for CAP1114
- has_repeat_en: repeat enable support, disabled by default on CAP1114
Include linux/bits.h, update the register operations related to LEDs.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-8-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some CAP11xx devices (CAP1126/CAP1188) have a dedicated RESET pin.
Add hardware reset operation to improve device reliability and
ensure proper initialization on probe.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-7-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the optional reset-gpios property to describe
the active-high reset pin for CAP1126/CAP1188 devices.
Driving the GPIO high asserts reset and deep sleep, while driving
it low releases reset for normal operation.
Restrict this property to be available only on CAP1126 and CAP1188
chips, as other CAP11xx variants do not have a hardware reset pin.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-6-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Apply per-chip LED channel limits:
- CAP1126: max 2 channels (0-1)
- CAP1188: max 8 channels (0-7)
- CAP1106, CAP12xx: no LED support
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-5-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Add datasheet links for all supported CAP11xx variants.
- Update LED node regex and replace enum constraints with minimum/maximum
for LED reg ranges in preparation for CAP1114 support.
CAP1114 has 11 LED channels. minimum/maximum constraints are easier to
maintain than long enum lists when expanding channel count later.
Drop unnecessary led unit-address pattern.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-4-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove unused register address macros and their corresponding
definitions in the cap11xx_reg_defaults array.
This cleanup reduces code clutter and makes the driver easier to
maintain without affecting functionality.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-3-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Duplicated device detection log exists at line 537 and line 542,
which brings redundant kernel print messages. Drop one redundant
log entry to clean up dmesg output.
Meanwhile add missing error logs when I2C communication fails
during driver probe(), helping debug.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-2-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of using an enum and conditional switch/if statements throughout
the driver to handle differences between chip variants (MMS114, MMS134S,
MMS136, MMS152, MMS345L), introduce a variant-specific descriptor
structure that encapsulates variant-specific properties (name, event
size, presence of configuration registers) and callbacks (such as
get_version). Define descriptors for each supported chip and associate
them with the matching entries in the OF and I2C device ID tables.
This eliminates the need for variant checks in the driver logic, making
it easier to support new chip variants in the future.
Note that there is slight change in device names:
MMS134S: "MELFAS MMS134 Touchscreen" -> "MELFAS MMS134S Touchscreen"
MMS345L: "MELFAS MMS345 Touchscreen" -> "MELFAS MMS345L Touchscreen"
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260616050912.1531241-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Avoid taking the machine down with BUG() if a caller ever requests a
read spanning the write-only MODE_CONTROL register; warn and return
-EINVAL so the driver can recover.
Additionally, fix parameter alignment to match the open parenthesis
in several functions to conform to the kernel coding style.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260616050912.1531241-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver currently uses udelay(MMS114_I2C_DELAY) (50us) to ensure a
mandatory delay between I2C transfers in __mms114_read_reg() and
mms114_write_reg().
Both functions invoke underlying I2C core operations (i2c_transfer,
i2c_master_send) which acquire mutexes and sleep. Furthermore, the
interrupt handler mms114_interrupt() is registered as a threaded IRQ
handler. Since the entire execution path is fully sleepable,
busy-waiting with udelay() for 50us unnecessarily wastes CPU cycles.
Replace udelay() with usleep_range() to allow the CPU to enter low-power
states or execute other tasks during the delay.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260616050912.1531241-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The MMS114 I2C touch controller uses 8-bit register addresses (0x01 to
0xF2) and 8-bit single-register data values. The helper functions
previously declared reg and val as 32-bit unsigned int, requiring
explicit bitwise masking (& 0xff) to narrow the values down to u8 before
populating the I2C transfer buffers.
Update reg and val parameters to u8 across mms114_read_reg(),
mms114_write_reg(), and __mms114_read_reg() to accurately reflect the
hardware specification and eliminate the redundant & 0xff masking.
Additionally, update the val buffer pointer in __mms114_read_reg() from
u8 * to void * to allow callers to pass data structures directly without
requiring explicit casting.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260616050912.1531241-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As explained in commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE
"GPL" vs. "GPL v2" bogosity"), "GPL" and "GPL v2" have identical
semantics in the module loader, but "GPL" is preferred to avoid
unnecessary confusion and maintain consistency across the kernel.
Change MODULE_LICENSE("GPL v2") to MODULE_LICENSE("GPL").
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260616050912.1531241-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add usable_fb_regions() to GspStaticConfigInfo to extract the usable FB
regions from GSP's fbRegionInfoParams. Usable regions are those that are
not reserved or protected.
The extracted regions are stored in GetGspStaticInfoReply and exposed
for use by the memory subsystem.
Display the regions and their total size upon device probe.
[acourbot: expose all regions as a KVec, display usable regions and
total usable VRAM.]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260617-boot-vram-v3-3-20b9ec5fe9f2@nvidia.com
[acourbot: replace dev_info!() with dev_dbg!().]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
This feature allows to reset a helper for an existing conntrack, but it
is not safe. This requires a synchronized_rcu() call after resetting the
helper, which is going to be expensive for a large batch of conntrack
entries. This also needs to call to the .destroy callback to release the
GRE/PPTP mappings to fix it.
This feature antedates the creation of the conntrack-tools and I cannot
find a good use-case for this. Given that I cannot find any user in the
netfilter.org userspace tree, I prefer to remove this feature.
Fixes: c1d10adb4a ("[NETFILTER]: Add ctnetlink port for nf_conntrack")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a test queueing from bridge family.
This was lacking: we queued from inet for ipv4 and ipv6 but
we had no bridge queue test so far.
Given kernel MUST validate that in/out port are still part of
a bridge device on reinject add a test case for this before
adding this check.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The existing test covered a scenario where a delayed INIT_ACK chunk
updates the vtag in conntrack after the association has already been
established.
A similar issue can occur with a delayed SCTP INIT chunk.
Add a new simultaneous-open test case where the client's INIT is
delayed, allowing conntrack to establish the association based on
the server-initiated handshake.
When the stale INIT arrives later, it may get recorded and cause a
following INIT_ACK from the peer to be accepted instead of dropped.
This INIT_ACK overwrites the vtag in conntrack, causing subsequent
SCTP DATA chunks to be considered as invalid and then dropped by
nft rules matching on ct state invalid.
This test verifies such stale INIT chunks do not cause problems.
Signed-off-by: Yi Chen <yiche.cy@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_synproxy_eval_v4() and nft_synproxy_eval_v6() already take a
whole-object READ_ONCE() snapshot of the shared priv->info state before
building the SYNACK reply, but nft_synproxy_tcp_options() still masks
opts->options with priv->info.options from the live shared object.
When a named synproxy object is updated concurrently with SYN traffic,
the eval path can then mix mss and timestamp handling from the local
snapshot with an options mask taken from a newer configuration, so one
SYNACK no longer reflects a coherent synproxy configuration.
Use info->options so nft_synproxy_tcp_options() stays on the same local
snapshot that the eval path already copied from priv->info.
Fixes: ee394f96ad ("netfilter: nft_synproxy: add synproxy stateful object support")
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- use correct names in kernel-doc comments
- add missing struct members to kernel-doc comments
Warning: include/linux/netfilter/x_tables.h:41 struct member 'targinfo' not described in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:41 Excess struct member 'targetinfo' description in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'family' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'nft_compat' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:101 expecting prototype for struct xt_mdtor_param. Prototype was for struct xt_mtdtor_param instead
Warning: include/linux/netfilter/x_tables.h:121 struct member 'net' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'table' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'target' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'targinfo' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'hook_mask' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'family' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'nft_compat' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:345 expecting prototype for xt_recseq(). Prototype was for DECLARE_PER_CPU() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before
using it to compute the header size, avoiding out-of-bounds access with
malformed IP headers.
While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP
constant when setting ctx->tun.proto and reference ctx->tun.hdr_size
when updating ctx->offset.
Fixes: ab427db178 ("netfilter: flowtable: Add IPIP rx sw acceleration")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 69894e5b4c ("netfilter: nft_connlimit: update the count if add
was skipped") introduced a regression where packets for valid
connections are dropped when using connlimit for soft-limiting
scenarios.
The issue occurs when a new connection reuses a socket currently in
the TIME_WAIT state. In this scenario, the connection tracking entry
is evaluated as already confirmed. Previously, __nf_conncount_add()
assumed that if a connection was confirmed and did not originate from
the loopback interface, it should skip the addition and return -EEXIST.
Skipping the addition triggers a garbage collection run that cleans up
the TIME_WAIT connection. Consequently, the active connection count
drops to 0, which xt_connlimit mishandles, leading to the false rejection
of the perfectly valid new connection.
Fix this by replacing the interface check with protocol-agnostic state
checks. We now skip the tree insertion and preserve the lockless garbage
collection optimization only if the connection is IPS_ASSURED. This
allows early-confirmed setup packets (such as reused TIME_WAIT sockets
or locally generated SYN-ACKs) to be properly evaluated and counted
without falsely dropping. The goto check_connections path is maintained
to ensure these setup packets are deduplicated correctly.
This has been tested with slowhttptest and HTTP server configured
locally to ensure we are not breaking soft-limiting scenarios for local
or external connections. In addition, it was tested with a OVS zone
limit too.
Fixes: 69894e5b4c ("netfilter: nft_connlimit: update the count if add was skipped")
Reported-by: Alejandro Olivan Alvarez <alejandro.olivan.alvarez@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/177349610461.3071718.4083978280323144323@eldamar.lan/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We ran into below KASAN splat, which is mostly uninteresting, beside
for having nf_nat_register_fn() in the call chain as a cause for the
offending access:
==================================================================
BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640
Read of size 8 at addr ffff890031e54c20 by task iptables/9510
CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
[…] dump_stack_lvl+0xee/0x160 ffff88004117eeb8
[…] print_report+0x6e/0x640 ffff88004117eee0
[…] ? __phys_addr+0x8e/0x140 ffff88004117eef0
[…] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08
[…] ? complete_report_info+0xec/0x1c0 ffff88004117ef20
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48
[…] kasan_report+0xbc/0x140 ffff88004117ef50
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90
[…] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8
[…] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070
[…] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080
[…] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8
[…] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130
[…] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190
[…] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8
[…] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310
[…] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358
[…] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360
[…] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488
[…] ? lock_acquire+0x16f/0x320 ffff88004117f490
[…] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0
[…] ? __nla_parse+0x45/0x80 ffff88004117f500
[…] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550
[…] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618
[…] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720
[…] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8
[…] ? gr_is_capable+0x6f/0xe0 ffff88004117f830
[…] ? __nla_parse+0x45/0x80 ffff88004117f860
[…] ? skb_pull+0x103/0x1a0 ffff88004117f880
[…] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0
[…] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8
[…] ? netlink_lookup+0xe2/0x240 ffff88004117f900
[…] netlink_unicast+0x74b/0xb00 ffff88004117f930
[…] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980
[…] ? __check_object_size+0x3e/0xaa0 ffff88004117f998
[…] ? security_netlink_send+0x51/0x160 ffff88004117f9c8
[…] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8
[…] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8
[…] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00
[…] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60
[…] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8
[…] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8
[…] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30
[…] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd20
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd58
[…] ? find_held_lock+0x3b/0xe0 ffff88004117fd70
[…] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8
[…] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0
[…] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98
[…] do_syscall_64+0x7d/0x400 ffff88004117fec8
[…] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8
</TASK>
==================================================================
The out-of-bounds report, though, is a red herring as it is for an
access that shouldn't have happened in the first place.
When nf_nat_init() fails to register its BPF kfuncs, it'll unwind and,
among others, call unregister_pernet_subsys() to deregister its per-net
ops. This makes the previously allocated net id available for reuse by
the next caller of register_pernet_subsys(), in our case, synproxy.
However, 'nat_net_id' will still hold the previously allocated value.
If nf_nat.o gets build as a module, all this doesn't matter. A failed
initialization routine makes the module fail to load and any dependent
module won't be able to load either. However, if nf_nat.o is built-in,
a failing init won't /completely/ make its functionality unavailable to
dependent modules, namely the code and static data is still there, free
to be called by modules like nft_chain_nat.ko.
Case in point, nft_chain_nat registers hooks that'll call into nf_nat
which, in our case, failed to initialize and therefore won't have a
valid net id nor related net_nat object any more.
Code in nf_nat, namely nf_nat_register_fn() and nf_nat_unregister_fn(),
still making use of the reallocated net id, lead to a type confusion as
the call to net_generic() will no longer return memory belonging to an
object suited to fit 'struct nat_net' but 'struct synproxy_net' instead.
The latter is only 24 bytes on 64-bit systems, much smaller than struct
nat_net which is 176 bytes, perfectly explaining the OOB KASAN report.
Detect and handle a failed nf_nat_init() by testing the 'nf_nat_hook'
pointer which will be reset to NULL on initialization errors to prevent
the usage of an invalid nat_net pointer.
As this check is only needed when nf_nat.o is built-in, guard it by
'#ifndef MODULE...'.
Fixes: cbc1dd5b65 ("netfilter: nf_nat: Fix possible memory leak in nf_nat_init()")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size.
Fixes: 53fefdd1d3 ("Input: mms114 - support MMS136")
Fixes: ab10867819 ("Input: mms114 - support MMS134S")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616050912.1531241-1-dmitry.torokhov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device.
Fixes: 6696777c65 ("Input: add driver for Elan I2C/SMbus touchpad")
Fixes: e3a9a12906 ("Input: elan_i2c - do not query the info if they are provided")
Signed-off-by: Ranjan Kumar <kumarranja@chromium.org>
Link: https://patch.msgid.link/20260612060339.3829666-1-kumarranja@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Memoryless force-feedback devices use a timer to manage playback of
effects. When a driver for such a device is unbound (or the device is
unregistered for other reasons), the driver typically frees its private
data synchronously. However, the input_dev structure (and its associated
force-feedback structures, including the timer) is only freed when the
last user closes the corresponding device node.
If userspace keeps the device node open while the device is unregistered
(e.g., during driver unbind), the force-feedback timer can still fire
after the driver's private data has been freed.
Introduce a new 'stop' callback to struct ff_device, and call it from
input_unregister_device() before the device is deleted. Implement this
callback for memoryless devices and synchronously shut down the timer to
ensure it is stopped and cannot be rearmed once unregistration happens.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260613-b4-disp-4828d263-v1-1-02320e1a89dd@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration.
Fixes: a7ac7c95d4 ("Input: goodix - use max touch number from device config")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612-b4-disp-6844625d-v1-1-df0aed080c9d@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
