Remove the probe error messages to avoid duplicate error reporting,
since the error is already reported by the called functions.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260812101418.37966-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functions called here don't log the error themselves, but the
error is already reported deeper in the call chain, so the dev_err()
calls are redundant and can be removed.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260812101418.37966-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace dev_err() with dev_err_probe() to prevent log spam when probe
returns -EPROBE_DEFER.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260812101418.37966-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add stream_arena_xchg_fault and stream_arena_cmpxchg_fault next to the
existing read, write and load-acquire fault tests, covering the two
places a read-modify-write can deposit the old value: src_reg for a
BPF_XCHG and r0 for a BPF_CMPXCHG. Both cover both halves of the JIT
bug that left the fetch destination alone when a RMW on an arena pointer
faulted:
- the fault has to be reported as a WRITE, and at the address held by
the destination register, which __stderr() and test_address() check
- the register receiving the fetched value has to be cleared by the
fault handler, which the programs check by poisoning it before the
atomic and returning it, so __retval(0) fails if it is left untouched
The __stderr() annotation can only wildcard the faulting address since
the arena base is not known until runtime, hence the two test_address()
subtests on top, which pin it to the address held by dst_reg rather than
src_reg.
Note, the atomics are open coded since linux/filter.h cannot be included
alongside vmlinux.h.
# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t stream
[...]
#464/1 stream_arena_fault_address/read_fault:OK
#464/2 stream_arena_fault_address/write_fault:OK
#464/3 stream_arena_fault_address/load_acquire_fault:OK
#464/4 stream_arena_fault_address/xchg_fault:OK
#464/5 stream_arena_fault_address/cmpxchg_fault:OK
#464 stream_arena_fault_address:OK
[...]
#466/5 stream_success/stream_arena_write_fault:OK
#466/6 stream_success/stream_arena_read_fault:OK
#466/7 stream_success/stream_arena_load_acquire_fault:OK
#466/8 stream_success/stream_arena_xchg_fault:OK
#466/9 stream_success/stream_arena_cmpxchg_fault:OK
[...]
Summary: 4/22 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://patch.msgid.link/20260811131600.506721-6-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear.
Fixes: 2f9469484a ("s390/bpf: Support arena atomics")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://patch.msgid.link/20260811131600.506721-5-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Same problem as on x86-64: add_exception_handler() folds "there is no
destination register to clear" and "this is a store" into one DONT_CLEAR
value ...
if (BPF_CLASS(insn->code) != BPF_LDX && !bpf_atomic_is_load_acq(insn))
dst_reg = DONT_CLEAR;
... which ex_handler_bpf() then reads back as the access direction:
bool is_write = (dst_reg == DONT_CLEAR);
A RMW carrying BPF_FETCH is both. emit_lse_atomic() reads the old value
into src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and into
r0 for BPF_CMPXCHG, so a fault over an unmapped arena page is correctly
reported as a WRITE but leaves that register holding a stale value instead
of the 0 that every other BPF_PROBE_* access delivers. Same as on x86-64,
add a separate ARENA_WRITE bit for the direction.
FIXUP_REG is now filled in by the callers of add_exception_handler(), the
BPF_PROBE_ATOMIC one deriving it from bpf_atomic_load_reg(), so that the
helper only has to determine the direction. This is how the riscv64 JIT
already does it, and it stops the two store callers from handing in a
dst_reg that was only going to be overwritten with DONT_CLEAR anyway.
Fixes: e612b5c1d3 ("bpf, arm64: Add support for lse atomics in bpf_arena")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://patch.msgid.link/20260811131600.506721-4-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
populate_extable() encodes "there is no destination register to clear" as
DONT_CLEAR in the DST_REG field of the exception table metadata, and later
ex_handler_bpf() then reuses that very value to derive the direction it
reports the fault with is_write = (reg == DONT_CLEAR). The two coincide
for a plain load or store, but not for a RMW carrying BPF_FETCH. Such an
atomic writes memory, so it has to be reported as a WRITE, and it also reads
the old value into a register, src_reg for BPF_ADD | BPF_FETCH and BPF_XCHG,
r0 for BPF_CMPXCHG, so that register has to be cleared on fault. A single
DONT_CLEAR cannot say both, and the store branch picks it unconditionally:
[...]
} else {
arena_reg = reg2pt_regs[dst_reg];
fixup_reg = DONT_CLEAR;
}
[...]
The reported direction is therefore right, but on a fault over an unmapped
arena page the fetch destination keeps whatever it held before the atomic,
where every other BPF_PROBE_* access delivers 0. Give the metadata its own
ARENA_WRITE bit so that the reported direction no longer depends on whether
there is a register to clear, and fill DST_REG in from bpf_atomic_load_reg().
BPF_{AND,OR,XOR} | BPF_FETCH need no handling here, bpf_jit_supports_insn()
already rejects those in the arena.
Fixes: d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260811131600.506721-3-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
A RMW atomic on an arena pointer is converted to BPF_PROBE_ATOMIC and
gets an exception table entry, but that entry records no destination
register to clear unless the instruction is a load-acquire today. That
is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. emit_atomic_rmw() emits it that way, e.g.:
[...]
case BPF_XCHG:
ctx->ex_insn_off = ctx->ninsns;
emit(is64 ? rv_amoswap_d(rs, rs, rd, 1, 1) :
rv_amoswap_w(rs, rs, rd, 1, 1), ctx);
[...]
Thus, a fault over an unmapped arena page ex_handler_bpf() jumps over
the access but leaves rs untouched, and the program resumes with
whatever it held before the atomic instead of the 0 that every other
BPF_PROBE_* access delivers. Fill the exception table entry in from
bpf_atomic_load_reg(), which returns the BPF register an atomic reads
the memory operand into or -1 when it has none. A load-acquire ends up
with the same register it gets today, it just goes through the helper.
Unlike x86-64 and arm64, riscv64 does not report arena violations from
its exception handler, so there is no access direction to correct here,
only the missing register clear.
Fixes: fb7cefabae ("riscv, bpf: Add support arena atomics for RV64")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://patch.msgid.link/20260811131600.506721-2-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
check_atomic_rmw() open codes the mapping from a BPF_ATOMIC to the register
it reads the old value into, the BPF_STX case of insn_def_regno() open codes
the very same mapping a second time, the const folding and the liveness
transfer functions a third and a fourth time, and BPF JITs need it as well
to know which register a faulting BPF_PROBE_ATOMIC has to clear.
Add a small helper so that all of them can share it. No functional change.
The BPF_LOAD_ACQ case is there for the JITs, which do walk all instruction
classes. const_reg_xfer() loses its explicit BPF_ATOMIC mode test since the
helper checks class and mode itself; the BPF_PROBE_ATOMIC it additionally
accepts cannot be seen there as it is only set from bpf_do_misc_fixups(),
that is, after const folding has run. arg_track_xfer() keeps its mode test
since that also guards the stack clearing next to it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260811131600.506721-1-daniel@iogearbox.net
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
devm_platform_ioremap_resource() does not report the error itself,
but the error is already reported deeper in the call chain,
so the dev_err() calls are redundant and can be removed.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260812084311.29188-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wq_node_nr_active() warns and returns NULL when @wq is not unbound, but
every caller dereferences the result right away, so the WARN_ON_ONCE()
only moves the oops one frame up, as raised by Tejun.
Fix it by BUGing_ON() instead of this silly WARN_ON_ONCE();
Fixes: b72fdc6510 ("workqueue: account nr_active by the backing pool")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll.
Fixes: 5bc493bf0c ("regmap: sdw-mbq: Add support for SDCA deferred controls")
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260811184500.5312-1-andrey.golovko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 9167f26047 ("ASoC: soc-generic-dmaengine: Handle DMA channel
request failures correctly") started reporting DMA channel request
failures during probe instead of silently ignoring them. This exposed a
bug in the Samsung I2S driver: it always registered a second DAI and its
associated "tx-sec" DMA channel, even for hardware variants that don't
actually support it, such as i2sv7 used on Exynos5433. As a result,
sound card probing on Exynos5433-based boards started failing, whereas
previously it worked only because the channel request failure was
ignored.
Drop the QUIRK_SEC_DAI flag from i2sv7, since this variant does not have
a secondary DAI and register "Secondary Playback" DAPM route only for
variants with such interface.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260812074438.3225001-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wq->cpu_pwq holds RCU-protected pwq pointers, but the percpu allocation
path fills it in with plain loads and stores, which sparse flags:
kernel/workqueue.c:5682:57: sparse: incorrect type in initializer (different address spaces) @@ expected struct pool_workqueue **pwq_p @@ got struct pool_workqueue [noderef] __rcu ** @@
Allocate the array as __rcu pointers and publish each pwq with
rcu_assign_pointer() once it is initialized and linked, the order
install_unbound_pwq() uses.
The warnings are not new: commit 79f23600bc ("workqueue: factor out
get_percpu_pool()") only turned the flagged assignment into an
initializer.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608120931.tvTzq1gD-lkp@intel.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
workqueue_congested() fetches the pwq out of wq->cpu_pwq with a plain
load, so sparse complains about the dropped __rcu:
kernel/workqueue.c:6304:13: sparse: incorrect type in assignment (different address spaces) @@ expected struct pool_workqueue *pwq @@ got struct pool_workqueue [noderef] __rcu * @@
A pwq is released with kfree_rcu() and the read is protected by the
surrounding preempt_disable(), which is what
commit fd5081f4ef ("workqueue: Remove redundant rcu_read_lock/unlock() in
workqueue_congested()") relied on when it dropped the rcu_read_lock()
here.
Use the rcu_dereference_sched() helper to make that explicit.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608120931.tvTzq1gD-lkp@intel.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
FAN53555BUC23X has the ID 0 and REV 0xc, starts at 600mV and
increments in 12.5mV steps.
Per the datasheet, the FAN53555BUC23X (23 option) is grouped with
the 00 and 13 options for soft-start timing (t_SS = 300us typ.),
so the existing enable_time = 400 is reused here as well.
This variant is found on the ASUS Tinker Edge R (RK3399Pro) as the
supply regulator for both vdd_gpu and vdd_cpu_b. Verified across
the full GPU OPP table with the userspace devfreq governor.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
Link: https://patch.msgid.link/20260812125054.19111-1-arash.golgol@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull to receive:
c10b216a07 ("sched/core: Handle pick_task() releasing the rq lock")
f3629c63a4 ("sched/core: Make core-sched flips wait for in-flight selections")
ffaab58d21 ("sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return")
3dd52416e4 ("sched_ext: Fix this_rq() assumptions in dispatch kfuncs")
f2da958711 ("sched_ext: Count rq lock releases in rq->scx.lock_drop_seq")
d954004205 ("sched_ext: Fix rq->core_pick corruption under core scheduling")
for the pending core scheduling follow-ups and to resolve the conflicts
with the code reorganization and cap gate work on for-7.3.
ffaab58d21 converts scx_dispatch_sched() to a dispatch verdict return
which for-7.3 moved from ext.c into inlines.h. Resolved by applying the
conversion to the relocated copy and combining balance_one()'s verdict
returns with the scx_task_can_stay_on_cpu() gate from the cap work.
ffaab58d21 and 3dd52416e4 update scx_bpf_sub_dispatch() which
for-7.3 moved into sub.c. Resolved by applying the scx_locked_rq()
switch and the verdict test to the sub.c copy.
f2da958711 instruments the open-coded lock releases in
consume_remote_task() which for-7.3 folded into switch_rq_lock().
Resolved by keeping the accounting in switch_rq_lock() which covers all
its callers.
d954004205 widens the put_prev_task_scx() WARN suppression to all
core-sched rqs on the same condition that for-7.3 gated with
scx_task_can_stay_on_cpu(). Resolved by combining both.
Signed-off-by: Tejun Heo <tj@kernel.org>
`_list_tests()` runs the kernel to list tests, strips printk timestamp
lines via `extract_tap_lines()`, then drops the dummy TAP header from
the cleaned `lines`. However the subsequent regex filter mistakenly
operates on the original `output` instead of the cleaned `lines`. When
the kernel output includes timestamp prefixes (common with UML or slower
setups), e.g.:
[ 0.100000] suite.test1
[ 0.100000] suite.test2
the anchored regex `^[^\s.]+\.[^\s.]+$` rejects them and `--list_tests`
returns an empty list.
Filter `lines` instead of `output`, matching the behavior of the
adjacent `_list_tests_attr()` which already returns the cleaned list.
Add a regression test with timestamp-prefixed input to verify the fix.
Link: https://lore.kernel.org/r/20260803190059.36491-1-mohammad.abukhader@hotmail.com
Fixes: 723c8258c8 ("kunit: tool: Add command line interface to filter and report attributes")
Signed-off-by: Mohammad Abu-Khader <mohammad.abukhader@hotmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Register a CPU_PM notifier to restore hypervisor CSR content during CPU
non-retention idle states. When a CPU enters a deep idle state that
powers off the CPU domain, hypervisor CSRs and VS CSRs lose their state
and must be saved before entry and restored after exit.
This completes KVM's power management coverage for RISC-V:
- CPU hotplug: handled by kvm_online_cpu/kvm_offline_cpu (cpuhp callbacks)
- System suspend: handled by kvm_suspend/kvm_resume (syscore ops)
- CPU idle (retention): no action needed, CSRs are retained
- CPU idle (non-retention): handled by this CPU_PM notifier
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260810-kvm-cpu-pm-v5-1-6c9e4c95caf5@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Simplify the probe function by using devm_platform_ioremap_resource()
for the base address and devm_platform_get_and_ioremap_resource() for
the SRAM, dropping the manual platform_get_resource() calls.
Assisted-by: opencode:deepseek-v4-flash-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260811042424.66882-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It appears that the bcm2712 SoC found in the relatively popular RPi5 has a
broken EL2 virtual timer.
Tthe reason why the timer isn't working is unknown (the timer is ticking,
but the interrupt never fires), and the SoC vendor doesn't communicate on
the reason why this isn't working, leaving users and maintainers in the
dark.
Paper over the issue by detecting the broken HW, falling back to the
physical timer instead, and let the user know about it. Also taint the
kernel as the machine is definitely not compliant with the spec, and it's
unknown what else is wrong with it.
Reported-by: John <therealgraysky@proton.me>
Reported-by: Daniel Drake <dan@reactivated.net>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Gary Guo <gary@garyguo.net>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260710080958.491620-1-maz@kernel.org
Two minor core fixes: one for power management issues in error handling
and the other to fix a deadlock in door locking of SCSI devices with
removable media; and a minor bug fix for the debug driver.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCanxl4BsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUKWgD/Yk1iSHcOBw9Ac6CzVAbBPiBQWKCLiQAo
16Ey+pk599sBAM9Bpt6rYM4Zj3O/u1K9cJ2g+q/iomQK+IC5YdC8xaOv
=7yaq
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor core fixes: one for power management issues in error
handling and the other to fix a deadlock in door locking of SCSI
devices with removable media; and a minor bug fix for the debug
driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Negate wrapped memcmp() result
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi: core: pair EH runtime PM get and put
The struct describes a bounce payload of an error code followed by the
original event and its external data. No kernel has ever sent that.
Before commit efc86691e4 ("ALSA: seq: Fix kernel heap address leak in
bounce_error_event()") the kernel emitted no SNDRV_SEQ_EVENT_BOUNCE at
all, and since then it sends the event record alone.
Nothing has ever read it either. Its only accessor,
snd_seq_event_bounce_ext_data(), has had no caller for the whole git
history, and it did not even compile until commit c7e0b5bf9f ("[ALSA]
Remove xxx_t typedefs: Sequencer") incidentally repaired the type name
it referred to, three years after the git import. Drop the accessor
along with the struct.
This removes a definition from a UAPI header. Since no kernel ever
produced the layout, nothing can have parsed it, but a program that
merely names the type will need to stop.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260812141506.4016387-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a valid signature is seen at the default offset, use the default
size/offset for discovery.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5447
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 46a0df99a0)
Cc: stable@vger.kernel.org
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a4b0720e4f)
Cc: stable@vger.kernel.org
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2417f9fd7)
Cc: stable@vger.kernel.org
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4 ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 14c8726b79)
Cc: stable@vger.kernel.org
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b906e1dc7)
Cc: stable@vger.kernel.org
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9ead ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8897ea8c76)
Cc: stable@vger.kernel.org
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 37519d007e)
Cc: stable@vger.kernel.org
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b41c8cb12e)
Cc: stable@vger.kernel.org
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64b525edb7)
Cc: stable@vger.kernel.org
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05e1387d15)
Cc: stable@vger.kernel.org
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876)
Cc: stable@vger.kernel.org
radeon_driver_load_kms() calls pm_runtime_use_autosuspend() for PX
devices, but radeon_driver_unload_kms() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the driver
unload path.
This issue was found by manual code inspection.
Fixes: 10ebc0bc09 ("drm/radeon: add runtime PM support (v2)")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0fdc1ff82e)
Cc: stable@vger.kernel.org
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 54a118f1d7)
Cc: stable@vger.kernel.org
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1b31bf69)
Cc: stable@vger.kernel.org
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db39852d0c)
Cc: stable@vger.kernel.org
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 665b1fc2a1)
Inside an FPU compilation unit DC_FP_START() and DC_FP_END() are defined
as BUILD_BUG(), so using them there fails the build. That was done on
purpose by
commit a574f53ed5 ("drm/amd/display: Permit DC_FP_START/END only in non-FP compilation units").
DC_RUN_WITH_PREEMPTION_ENABLED() was added later by
commit 3539437f35 ("drm/amd/display: Move FPU Guards From DML To DC - Part 1")
and defined as a plain pass-through in that same branch instead. A wrap
placed inside an FPU compilation unit therefore compiles cleanly, reads
as correct during review, and does nothing at all.
This is not hypothetical. While chasing a "scheduling while atomic"
splat in dc_create_plane_state() on PREEMPT_RT, an attempt to place the
guard further up the call chain, in dml21_add_phantom_plane() in
dc/dml2_0/dml21/dml21_utils.c, had no effect for exactly this reason:
dc/dml2_0/Makefile applies CC_FLAGS_FPU to every object under that
directory, and the top level Makefile adds -D_LINUX_FPU_COMPILATION_UNIT
to CC_FLAGS_FPU.
Define the macro as BUILD_BUG() there as well, so that the mistake is a
compile error rather than a guard that silently does nothing. The code
argument is kept in the expansion so the BUILD_BUG() failure is not
accompanied by set-but-unused diagnostics for variables assigned inside
it.
No current user is affected. dc/core/dc_stream.c and
dc/resource/dcn32/dcn32_resource.c are outside the dml directories, and
dc/dml2_0/dml2_wrapper.c and dc/dml2_0/dml21/dml21_wrapper.c are built
without the FPU flags because dc/dml2_0/Makefile replaces their CFLAGS
with CC_FLAGS_NO_FPU and removes CC_FLAGS_FPU.
Link: https://lore.kernel.org/all/1ead313022bc62dce1f42af9f855727eb9074443.camel@web.de/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu15/smu_v15_0_8_ppt.c:1964
smu_v15_0_8_set_performance_level() error: uninitialized symbol 'ret'.
In this line there is an "if (ret)" condition where "ret" is either
zero or uninitialized. Initialize "ret" at the start of the function to
avoid a potential uninitialized variable bug. But also delete the
condition since it is never true.
Fixes: 422b399b09 ("drm/amd/pm: Add od_edit_dpm_table support")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A GPU reset can race with BO teardown after the BO's GTT resource has
been marked for deletion but before its drm_mm node is removed. In this
window, amdgpu_gtt_mgr_recover() can treat the node as a live BO and try
to restore its GART mapping while its TT backing is being destroyed.
Recolor the GTT node from amdgpu_bo_delete_mem_notify() so that recovery
skips it, reusing the existing color for ranges without a BO. The range
stays allocated until the resource is freed.
This prevents reset recovery from accessing a BO whose backing storage
is no longer valid.
v2: refine commit message. (David Francis)
v3: Remove new BO color. (Christian)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A PRT/sparse mapping has no backing BO, so its bo_va->base.bo is NULL.
amdgpu_vm_bo_base_init() deliberately keeps such a bo_va off the vm_bo
state lists, but the tail of amdgpu_vm_bo_update() unconditionally called
amdgpu_vm_bo_idle() for the !always_valid case, putting the NULL-bo PRT
bo_va onto the individual.idle list.
On a GPU reset amdgpu_vm_bo_reset_state_machine() moves individual.idle
to individual.needs_update with moved=true, and amdgpu_vm_handle_moved()
then dereferences bo_va->base.bo to read its reservation object,
crashing on the NULL bo (e.g. the userq eviction restore worker running
during a reset while a user queue is torn down):
BUG: kernel NULL pointer dereference, address: 0000000000000158
RIP: 0010:amdgpu_vm_handle_moved+0x17a/0x200 [amdgpu]
Call Trace:
amdgpu_userq_vm_validate_and_restore_queue+0x2ce/0x920 [amdgpu]
amdgpu_userq_restore_worker+0xce/0x210 [amdgpu]
Skip amdgpu_vm_bo_idle() when bo is NULL so a PRT mapping never lands on
a state list in the first place, and refresh the PRT page tables
explicitly in the userq restore path (as the CS path already does) so
sparse mappings survive a VRAM-lost reset. Because the PRT bo_va is off
the state lists, its PTE update fence lands in prt_va->last_pt_update
rather than vm->last_update, so wait on it explicitly before restarting
the queues (mirroring how the CS path syncs that fence).
v2:
- keep the PRT bo_va off the vm_bo state lists instead of NULL-guarding
bo inside amdgpu_vm_handle_moved(); a PRT mapping should never be on
the moved list in the first place (Christian)
v3:
- the PRT PTEs are updated separately, so their fence is in
prt_va->last_pt_update, not vm->last_update; wait on it in the userq
restore path before restarting queues, otherwise the queues could
restart before the sparse PTEs are written (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4 ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9ead ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
