Now that the BUS_ALIGN variable has been removed, the
arcnet_in/out/read/write* macros behave identically to the functions
they wrap. Expand them and remove their definitions to make the code
easier to maintain.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-6-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CONFIG_SA1100_CT6001 option has never existed in the kernel. Remove
code in arcdevice.h referring to it. This allows the
arcnet_(in|out)(s|)b macros to be simplified by removing the BUS_ALIGN
macro.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-5-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While ARCnet is still used in industrial environments, and cards are
still manufactured, it is unlikely anyone is still using it with ISA
and PCMCIA cards. Reduce future maintenance burden by removing all ISA
and PCMCIA ARCnet drivers and documentation related to them. Update
instructions for loading modules and passing parameters to work on
modern kernels and with the com20020_pci driver. Also take the
opportunity to document the rest of the module parameters, correct a
file path in Documentation/networking/arcnet.rst, and change a
reference to /etc/rc.inet1, which no longer exists, to refer to
ifconfig.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-4-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ARCnet code contains quite a few typos in comments. Fix them.
Initially noticed by inspection, then augmented using codespell.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-3-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ARCnet does not support multicast, only unicast and broadcast. In spite
of this, the com20020 driver contains several references to multicast
in a comment and a function name, including a FIXME that it should be
implemented. Adjust the comment to make the lack of multicast support
clear and rename com20020_set_mc_list to com20020_set_rx_mode.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-2-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add debugfs entries to expose hardware configuration and diagnostic
information that aids in debugging driver initialization and runtime
operations without adding noise to dmesg.
The debugfs directory for each PCI device is named using pci_name()
(the unique BDF address), and its creation and removal is integrated
into mana_gd_setup() and mana_gd_cleanup_device() respectively, so
that all callers (probe, remove, suspend, resume, shutdown) share a
single code path.
Device-level entries (under /sys/kernel/debug/mana/<BDF>/):
- num_msix_usable, max_num_queues: Max resources from hardware
- gdma_protocol_ver, pf_cap_flags1: VF version negotiation results
- num_vports, bm_hostmode: Device configuration
Per-vPort entries (under /sys/kernel/debug/mana/<BDF>/vportN/):
- port_handle: Hardware vPort handle
- max_sq, max_rq: Max queues from vPort config
- indir_table_sz: Indirection table size
- steer_rx, steer_rss, steer_update_tab, steer_cqe_coalescing:
Last applied steering configuration parameters
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260519064621.772154-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
-----BEGIN PGP SIGNATURE-----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=XLqG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
-----BEGIN PGP SIGNATURE-----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=vzwG
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a few more updates:
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
* tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (24 commits)
wifi: cfg80211: wext: validate chandef in monitor mode
wifi: mac80211: consume only present negotiated TTLM maps
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
wifi: mac80211: fix multi-link element inheritance
wifi: mac80211: fix MLE defragmentation
wifi: mac80211: don't override max_amsdu_subframes
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing
wifi: ath11k: clear shared SRNG pointer state on restart
wifi: ath11k: fix use after free in ath11k_dp_rx_msdu_coalesce()
wifi: ath11k: fix peer resolution on rx path when peer_id=0
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: use correct function to read STEP_URM register
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: ath10k: skip WMI and beacon transmission when device is wedged
...
====================
Link: https://patch.msgid.link/20260521152903.374070-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During SR-IOV teardown, enetc_msg_psi_free() disables the MR interrupt
before pci_disable_sriov() removes the VFs. If a VF sends a mailbox
message during this window, the PF cannot receive it, causing the VF to
timeout waiting for a reply.
Since the timeout occurs during SR-IOV teardown when the VF is about to
be removed anyway, it has no functional impact on operation. However,
more messages will be added in the future, some visible error logs may
confuse users. So fix it by calling pci_disable_sriov() first to remove
all VFs, then safely clean up the mailbox resources. This eliminates the
race window where VFs could send messages to an unresponsive PF.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-10-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported a potential issue in enetc_msg_psi_init() where the IRQ
handler is registered before DMA resources are fully initialized [1].
The current initialization sequence is:
1. request_irq(enetc_msg_psi_msix) <- IRQ handler registered
2. INIT_WORK(&pf->msg_task, ...) <- work_struct initialized
3. enetc_msg_alloc_mbx() <- mailbox DMA allocated
This ordering is unsafe because if a spurious interrupt or pending
interrupt from a previous device state fires immediately after
request_irq() returns, the registered ISR enetc_msg_psi_msix() will
execute and unconditionally call:
schedule_work(&pf->msg_task)
At this point, pf->msg_task has not been initialized by INIT_WORK(), so
the work_struct contains garbage values in its internal linked list
pointers (work_struct->entry). Passing an uninitialized work_struct to
schedule_work() could corrupt the kernel's workqueue linked lists,
potentially leading to:
- Kernel panic in __queue_work()
- Memory corruption in workqueue data structures
- System deadlock or undefined behavior
Additionally, even if the work_struct was initialized, the mailbox DMA
buffers (pf->rxmsg[]) may not yet be allocated when the work handler
enetc_msg_task() runs, resulting in NULL pointer dereference.
Fix by reordering the initialization sequence to ensure all resources are
properly initialized before the interrupt handler can execute:
1. enetc_msg_alloc_mbx() <- Allocate all mailboxes
2. INIT_WORK(&pf->msg_task, ...) <- Initialize work first
3. request_irq(enetc_msg_psi_msix) <- Register IRQ last
4. Configure hardware & enable MR interrupts
This guarantees that when enetc_msg_psi_msix() runs:
- pf->msg_task is properly initialized (safe for schedule_work)
- pf->rxmsg[] buffers are allocated (safe for work handler access)
- Hardware is configured appropriately
As the inverse of enetc_msg_psi_init(), enetc_msg_psi_free() also has
similar problems. For example, if a pending interrupt fires between
enetc_msg_free_mbx() and free_irq(), the ISR enetc_msg_psi_msix() may
schedule the work handler again via schedule_work(), which could then
access already-freed DMA buffers (pf->rxmsg[]), leading to use-after-free
and potential memory corruption.
Therefore, the order of enetc_msg_psi_free() is adjusted:
1. enetc_msg_disable_mr_int() <- Stop new interrupts first
2. free_irq() <- Ensure no IRQ handler can run
3. cancel_work_sync() <- Wait for any pending work
4. enetc_msg_disable_mr_int() <- Re-disable in case work
re-enabled it
5. enetc_msg_free_mbx() <- Safe to free DMA buffers now
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc_msg_task() function has several issues that need to be addressed:
1. Unbounded loop causing potential DoS:
enetc_msg_task() processes VF-to-PF mailbox messages in an unbounded
for(;;) loop that keeps polling ENETC_PSIMSGRR until no MR bits are set.
A malicious guest VM can exploit this by continuously sending messages at
a high rate - immediately sending a new message as soon as the PF
acknowledges the previous one. Since the worker thread never yields or
enforces a processing budget, the mr_mask check frequently evaluates to
non-zero, causing the PF to spin indefinitely and starving other tasks.
Fix this by replacing the unbounded loop with a single snapshot read at
task entry. The task processes only the VFs whose MR bits were set at
that point, then re-enables message interrupts before returning. This
bounds work per invocation to at most num_vfs iterations. No messages are
lost because the message interrupt is disabled in enetc_msg_psi_msix()
before scheduling enetc_msg_task(), so any new messages arriving during
processing will trigger a fresh interrupt once re-enabled, scheduling
another task invocation.
2. Write order of ENETC_PSIIDR and ENETC_PSIMSGRR:
Both ENETC_PSIIDR and ENETC_PSIMSGRR contain MR bits indicating messages
have been received from VSIs, but only ENETC_PSIIDR trigger the CPU
interrupt. Previously, ENETC_PSIMSGRR was written before ENETC_PSIIDR.
Writing ENETC_PSIMSGRR returns the message code to the VSI in its upper
16 bits, signaling to the VF that message processing is complete and it
may send the next message. If the VF sends a new message before
ENETC_PSIIDR is written, the subsequent w1c write to ENETC_PSIIDR would
inadvertently clear the MR bit set by the new message, causing the
interrupt to be lost and the new message to go unprocessed.
Therefore, write ENETC_PSIIDR first to clear the interrupt source, then
write ENETC_PSIMSGRR to acknowledge the message to the VSI.
3. Check both ENETC_PSIMSGRR and ENETC_PSIIDR for mr_status:
The write order change above introduces a potential race: if a VF sends
a new message in the window between the ENETC_PSIIDR w1c and the
ENETC_PSIMSGRR w1c, the ENETC_PSIMSGRR MR bit for the new message may
not be set. If mr_status was derived solely from ENETC_PSIMSGRR, this
message would never be detected despite ENETC_PSIIDR retaining its MR
bit, leading to an unacknowledged interrupt storm.
Fix this by computing mr_status as the union of both ENETC_PSIMSGRR and
ENETC_PSIIDR MR bits, ensuring all pending messages are detected
regardless of which register reflects the new message state.
Additionally, rename the per-register MR macros (ENETC_PSI*_MR_MASK,
ENETC_PSI*_MR) to register-agnostic names (ENETC_PSIMR_MASK,
ENETC_PSIMR_BIT) since the MR bit layout is shared across ENETC_PSIMSGRR,
ENETC_PSIIER, and ENETC_PSIIDR. Make the mask macro dynamic based on
the actual number of active VFs rather than hardcoded.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260520064421.91569-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The teardown sequence in enetc_msg_psi_free() frees the DMA buffer before
clearing the device's DMA address registers. If a VF sends a message or a
pending DMA transfer completes within this window, the hardware will
perform a DMA write into the kernel memory that has already been returned
to the allocator.
The result is silent memory corruption that can affect arbitrary kernel
data structures. Therefore, clear the DMA address registers before the
DMA buffer is freed.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported a potential race condition between the VF message
handler and administrative VF MAC configuration from the host [1].
The VF message handler (enetc_msg_pf_set_vf_primary_mac_addr) runs
asynchronously in a workqueue context and accesses vf_state->flags
without any locking. Concurrently, the host can administratively
change the VF MAC address via enetc_pf_set_vf_mac(), which executes
under RTNL lock and modifies both vf_state->flags and hardware
registers.
This creates two race windows:
1) TOCTOU race on vf_state->flags: The check of ENETC_VF_FLAG_PF_SET_MAC
and subsequent MAC programming are not atomic, allowing the flag state
to change between check and use.
2) Torn MAC address writes: Hardware MAC programming requires multiple
non-atomic register writes (__raw_writel for lower 32 bits and
__raw_writew for upper 16 bits). Concurrent updates from VF mailbox
and PF admin paths can interleave these operations, resulting in a
corrupted MAC address being programmed into the hardware.
Fix by introducing a per-VF mutex to serialize access to vf_state and
hardware MAC register updates. Both enetc_pf_set_vf_mac() and
enetc_msg_pf_set_vf_primary_mac_addr() now acquire this lock before
accessing vf_state->flags or programming the MAC address, ensuring
atomic read-modify-write sequences and preventing register write
interleaving.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that the PF driver accepts arbitrary MAC address from
from VF mailbox messages without proper validation, creating a security
vulnerability [1].
In enetc_msg_pf_set_vf_primary_mac_addr(), the MAC address is extracted
directly from the message buffer (cmd->mac.sa_data) and programmed into
hardware via pf->ops->set_si_primary_mac() without any validity checks.
A malicious VF can configure a multicast, broadcast, or all-zero MAC
address. Therefore, a validation to check the MAC address provided by VF
is required.
However, simply checking the MAC address is not enough, because it also
has the potential TOCTOU race [2]: The code reads the MAC address from
the DMA buffer to validate it via is_valid_ether_addr(), if validation
passes, reads the same DMA buffer a second time when calling
enetc_pf_set_primary_mac_addr() to program the hardware. A malicious VF
can exploit this window by overwriting the MAC address in the DMA buffer
between the validation check and the hardware programming, bypassing the
validation entirely.
Therefore, allocate a local buffer in enetc_msg_handle_rxmsg() and copy
the message content from the DMA buffer via memcpy() before processing.
This ensures the PF operates on a stable snapshot that the VF cannot
modify.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Link: https://sashiko.dev/#/patchset/20260513103021.2190593-1-wei.fang%40nxp.com#2
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that a buggy or malicious guest VM can flood the host
kernel log by repeatedly sending VF-to-PF messages at a high rate,
degrading host performance and hiding important system logs [1].
Fix by replacing dev_err()/dev_warn() with dev_err_ratelimited(),
limiting output to the default kernel ratelimit. This ensures errors are
still logged for debugging while preventing log flooding attacks.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In enetc_pf_probe(), when the memory allocation for pf->vf_state fails,
the code jumps to the error handling label but the variable 'err' is not
assigned an appropriate error code beforehand. This causes the function
to return 0 (success) on an allocation failure path, misleading the
caller into thinking the probe succeeded. So set err to -ENOMEM before
jumping to the error handling label when the allocation for pf->vf_state
returns NULL.
Fixes: e15c5506dd ("net: enetc: allocate vf_state during PF probes")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two cases where VFs receive an incorrect success status from
the PF mailbox message handler, misleading them into believing their
requests have been fulfilled:
In enetc_msg_handle_rxmsg(), *status is pre-initialized to
ENETC_MSG_CMD_STATUS_OK. When an unsupported command type is received,
the default case only logs an error without updating *status, so it
remains as ENETC_MSG_CMD_STATUS_OK.
In enetc_msg_pf_set_vf_primary_mac_addr(), when the PF has already
assigned a MAC address for the VF (ENETC_VF_FLAG_PF_SET_MAC is set),
the function rejects the request but returns ENETC_MSG_CMD_STATUS_OK
instead of ENETC_MSG_CMD_STATUS_FAIL.
Therefore, correct the status value for the two cases mentioned above.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working.
Link: https://github.com/raspberrypi/linux/issues/7304
Fixes: 6ef398ea60 ("net: bcmgenet: add EEE support")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the driver for our current coding style according to output from
`checkpatch.pl' and manual code review, where no change to binary code
results, as indicated by `objdump -dr'. Exceptions are as follows:
- incomplete reverse xmas tree in set_multicast_list(), as that would
change binary output,
- referring el3_start_xmit() verbatim rather than via `__func__' with
pr_debug(), likewise,
- a bunch of pr_cont() calls, likewise,
- a long udelay() call in el3_netdev_set_ecmd() made under a spinlock,
likewise plus it's not eligible for conversion to a sleep in the first
place,
- a blank line at the start of a block in el3_interrupt(), to improve
readability where the first statement would otherwise visually merge
with the controlling expression of the enclosing `while' statement.
These issues are benign and depending on circumstances may be adressed
with suitable code refactoring later on.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201208280.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver has landed with Linux 0.99.13k, which was covered by the GNU
General Public License version 2, and no further conditions as to
licensing terms have been specified within the copyright notice included
with the driver itself.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201206370.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transceiver type is held in bits 15:14 of the Address Configuration
Register, with the values of 0b00, 0b01, and 0b11 denoting TP, AUI, and
BNC types respectively. Therefore switching from BNC to AUI requires
bits to be cleared before setting bit 14 or the setting won't change.
NB this has always been wrong ever since this code was added in 2.5.42.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201205160.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 91f3a27ae9.
Contrary to the assumption stated with the original commit description
this driver is in use and I'm going to maintain it for the foreseeable
future.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201204260.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver passes fw_version directly to devlink_info_version_stored_put()
without ensuring null-termination. While current firmware null-terminates
these strings, the driver should not rely on this behavior. Add explicit
null-termination to prevent potential issues if firmware behavior changes.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration.
Fixes: 3b23a32a63 ("net: fix dev_ifsioc_locked() race condition")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260520075736.3415676-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry()
should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The
code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is
never true for a single pcifunc, so the intended early return never ran.
Use logical OR instead.
Cc: Geetha sowjanya <gakula@marvell.com>
Fixes: ae703539f4 ("octeontx2-af: Cleanup loopback device checks")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path.
Fixes: 3670970dd8 ("net: iosm: shared memory IPC interface")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the ethtool private statistics interface to expose additional
port-level and MAC-level counters that are not covered by the standard
IEEE 802.3 statistics. The pMAC counters are only reported when the port
supports Frame Preemption (802.1Qbu/802.3br).
Note that although rtnl_link_stats64 provides some standard statistics
such as rx octets, rx frame errors, rx dropped packets, and tx packets,
these are overall port statistics. The NETC switch supports preemption
on each port, and each port has two MACs (eMAC and pMAC). The driver
private statistics are used to obtain statistics for each MAC, allowing
users to perform analysis and debugging.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-16-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool is a quantity of memory available for buffering a group
of flows (e.g. frames having the same priority, frames received from the
same port), while waiting to be transmitted on a port. The buffer pool
tracks internal memory consumption with upper bound limits and optionally
a non-shared portion when associated with a shared buffer pool. Currently
the shared buffer pool is not supported, it will be added in the future.
For i.MX94, the switch has 4 ports and 8 buffer pools, so each port is
allocated two buffer pools. For frames with priorities of 0 to 3, they
will be mapped to the first buffer pool; For frames with priorities of
4 to 7, they will be mapped to the second buffer pool. Each buffer pool
has a flow control on threshold and a flow control off threshold. By
setting these threshold, add the flow control support to each port.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-14-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Expand the NETC switch driver with several foundational features:
- FDB and MDB management
- STP state handling
- MTU configuration
- Port setup/teardown
- Host flooding support
At this stage, the driver operates only in standalone port mode. Each
port uses VLAN 0 as its PVID, meaning ingress frames are internally
assigned VID 0 regardless of whether they arrive tagged or untagged.
Note that this does not inject a VLAN 0 header into the frame, the VID
is used purely for subsequent VLAN processing within the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-13-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Different versions of NETC switches have different numbers of ports and
MAC capabilities. Add .phylink_get_caps() to struct netc_switch_info,
allowing each NETC switch version to implement its own callback for
obtaining MAC capabilities.
Implement the phylink_mac_ops callbacks: .mac_config(), .mac_link_up(),
and .mac_link_down(). Note that flow-control configuration is not yet
supported in .mac_link_up(), but will be implemented in a subsequent
patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260518082506.1318236-12-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For i.MX94 series, the NETC IP provides full 802.1Q Ethernet switch
functionality, advanced QoS with 8 traffic classes, and a full range of
TSN standards capabilities. The switch has 3 user ports and 1 CPU port,
the CPU port is connected to an internal ENETC. Since the switch and the
internal ENETC are fully integrated within the NETC IP, no back-to-back
MAC connection is required. Instead, a light-weight "pseudo MAC" is used
between the switch and the ENETC. This translates to lower power (less
logic and memory) and lower delay (as there is no serialization delay
across this link).
Introduce the initial NETC switch driver with basic probe and remove
functionality. More features will be added in subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-11-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All the tables of NETC switch are managed through the command BD ring,
but unlike ENETC, the switch has two command BD rings, if the current
ring is busy, the switch driver can switch to another ring to manage
the table. Currently, the NTMP driver does not support multiple rings.
Therefore, update ntmp_select_and_lock_cbdr() to select a appropriate
ring to execute the command for the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-9-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before probing the NETC switch driver, some pre-initialization needs to
be set in NETCMIX and IERB to ensure that the switch can work properly.
For example, i.MX94 NETC switch has three external ports and each port
is bound to a link. And each link needs to be configured so that it can
work properly, such as I/O variant and MII protocol.
In addition, the switch port 2 (MAC 2) and ENETC 0 (MAC 3) share the same
parallel interface, they cannot be used at the same time due to the SoC
constraint. And the MAC selection is controlled by the mac2_mac3_sel bit
of EXT_PIN_CONTROL register. Currently, the interface is set for ENETC 0
by default unless the switch port 2 is enabled in the DT node.
Like ENETC, each external port of the NETC switch can manage its external
PHY through its port MDIO registers. And the port can only access its own
external PHY by setting the PHY address to the LaBCR[MDIO_PHYAD_PRTAD].
If the accessed PHY address is not equal to LaBCR[MDIO_PHYAD_PRTAD], then
the MDIO access initiated by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the host-PF-specific mlx5_cmd_host_pf_enable/disable_hca()
into generic mlx5_cmd_pf_enable/disable_hca() that accept a vport
number. The new functions use vhca_id as function_id when supported.
Similarly, refactor the eswitch layer into generic static helpers
mlx5_esw_pf_enable/disable_hca() with thin wrappers for the host PF
case, in preparation for enable_hca on satellite PF vports.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-9-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use mlx5_vport_set_other_func_cap() and
mlx5_vport_set_other_func_general_cap() in the IPsec eswitch functions
instead of open-coding the SET_HCA_CAP command. This removes redundant
buffer allocation and boilerplate, and also enables vhca_id based
addressing when supported.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use mlx5_vport_set_other_func_general_cap() instead of open-coding the
SET_HCA_CAP command. This removes redundant buffer allocation and
ensures consistent use of vport-based function addressing.
mlx5_vport_set_other_func_general_cap() supports both function_id and
vhca_id based addressing, so this also enables SET_HCA_CAP for vhca_id
indexed functions which was not supported before.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-7-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add mlx5_vport_set_other_func_general_cap() convenience macro, symmetric
to the existing mlx5_vport_get_other_func_general_cap(), and use it in
mlx5_devlink_port_fn_roce_set().
No functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-6-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlx5_vport_set_other_func_cap() and mlx5_vport_get_vhca_id() allocate
command buffers that embed the HCA capability union, exceeding 4KiB.
Use kvzalloc/kvfree so the allocation can fall back to vmalloc when
contiguous memory is scarce.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-5-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IPsec eswitch offload operations and the enabled_ipsec_vf_count counter
are intended for VF vports only. Replace the MLX5_VPORT_HOST_PF checks
with mlx5_eswitch_is_vf_vport() to properly identify VF vports, as
preparation for adding another type of PF vports.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the v1 response layout for the query_esw_functions command when
supported by the device. When query_host_net_function_v1 capability is
set, use MLX5_QUERY_ESW_FUNC_OP_MOD_LAYOUT_V1 to retrieve parameters
for multiple network functions, allocating the output buffer according
to query_host_net_function_num_max. Validate that firmware does not
return more entries than the allocated buffer.
The v1 layout reports vhca_state instead of the legacy host_pf_disabled
bit. PFs transition through ALLOCATED, ACTIVE, and IN_USE states (they
do not use TEARDOWN_REQUEST as SFs do). When the ECPF calls disable_hca,
firmware resets the PF and moves it to ALLOCATED. When the ECPF calls
enable_hca, the PF moves to ACTIVE, and once the PF driver enables it,
it reaches IN_USE. The PF is only fully operational in IN_USE, so
pf_disabled is derived as vhca_state != IN_USE, equivalent to the legacy
host_pf_disabled bit.
The mlx5_esw_get_host_pf_info() helper abstracts parsing the command
output in both legacy and new formats, so callers do not need to handle
the different layouts.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a helper mlx5_esw_get_host_pf_info() to retrieve host PF data from
the query_esw_functions command output, so callers no longer need to
parse the layout to obtain the required information.
Convert all callers of mlx5_esw_query_functions() to use the new helper,
preparing for upcoming support of the new op_mod that returns data in
the network_function_params layout.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
