Add optional power-domains property for usb phy.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221014095550.2125018-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, ci_usb_role_switch_set() may be called before system resume
stage when suspended. Worse yet, ci_hdrc device may stay at RPM_ACTIVE
state which will cause pm_runtime_get_sync() fail to resume the device.
In this case, role-switch may unable to complete transition process due
to not exit from lpm state or due to lack some means after system resume.
Same as ci_cable_notifier(), usb_role_switch could handle its events based
on ci_hdrc_cable mechanism.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20221009155336.766960-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy-generic uses the existance of the property "vcc-supply" to see if a
regulator is optional or not. Use devm_regulator_get_optional() instead
which exists for this purpose. Using devm_regulator_get_optional()
avoids "supply vcc not found, using dummy regulator" messages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20221012132754.292151-1-s.hauer@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the warnings:
at24 0-0053: supply vcc not found, using dummy regulator
at24 0-0057: supply vcc not found, using dummy regulator
at24 1-0057: supply vcc not found, using dummy regulator
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.
Fixes: 510c527b4f ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Depending of the boot sequence 'bus' genpd could be probed after imx8m-blk-ctrl
which led driver probe to fail. Change the returned error to allow
to defer the probe in this case.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The on-board USB hub has a single reset line which needs to be enabled.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The variable len is assigned a value that is never read. It is re-assigned
a new value in the following do-while loop and never referenced after
the loop. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/thunderbolt/xdomain.c:344:2: warning: Value stored to 'len' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use str_enabled_disabled() helper instead of open coding the same.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
- corsair-psu: Fix typo in USB id description, and add USB ID for new PSU
- pwm-fan: Fix fan power handling when disabling fan control
-----BEGIN PGP SIGNATURE-----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=ajp4
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
-----BEGIN PGP SIGNATURE-----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=osgb
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
-----BEGIN PGP SIGNATURE-----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=gJf4
-----END PGP SIGNATURE-----
Merge tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
The default elevator is allocated in the beginning of device_add_disk(),
however, it's not freed in the following error path.
Fixes: 50e34d7881 ("block: disable the elevator int del_gendisk")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20221022021615.2756171-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.
Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the 4 GPIO controlled LEDs to the Microchip PolarFire-SoC Icicle
Kit device tree. The schematic doesn't specify any special function
for the LEDs, so they're added here without any default triggers and
named led1, led2, led3 and led4 just like in the schematic.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. In the case of CPUID.8000001AH, only three bits are
currently defined. The 125 reserved bits should be masked off.
Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220929225203.2234702-4-jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. The following ranges of CPUID.80000008H are reserved
and should be masked off:
ECX[31:18]
ECX[11:8]
In addition, the PerfTscSize field at ECX[17:16] should also be zero
because KVM does not set the PERFTSC bit at CPUID.80000001H.ECX[27].
Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220929225203.2234702-3-jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. CPUID.80000006H:EDX[17:16] are reserved bits and
should be masked off.
Fixes: 43d05de2be ("KVM: pass through CPUID(0x80000006)")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220929225203.2234702-2-jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. CPUID.80000001:EBX[27:16] are reserved bits and
should be masked off.
Fixes: 0771671749 ("KVM: Enhance guest cpuid management")
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Fixes: 17601bfed9 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Constify parameter in device_dma_supported() and device_get_dma_attr()
since they don't alter anything related to it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20221004092129.19412-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device parameter is not altered in the device child node APIs,
constify them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20221004092129.19412-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constify parameter in fwnode_graph_is_endpoint() since it doesn't
alter anything related to it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20221004092129.19412-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fwnode and device parameters are not altered in the fwnode
connection match APIs, constify them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20221004092129.19412-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's not fully correct to take a const parameter pointer to a struct
and return a non-const pointer to a member of that struct.
Instead, introduce a const version of the dev_fwnode() API which takes
and returns const pointers and use it where it's applicable.
With this, convert dev_fwnode() to be a macro wrapper on top of const
and non-const APIs that chooses one based on the type.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: aade55c860 ("device property: Add const qualifier to device_get_match_data() parameter")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20221004092129.19412-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Returning an error value in a platform driver's remove callback results in
a generic error message being emitted by the driver core, but otherwise it
doesn't make a difference. The device goes away anyhow.
For each case where ret is non-zero the driver already emits an error
message, so suppress the generic error message by returning zero
unconditionally. (Side note: The return value handling was unreliable
anyhow as the value returned by dwc2_exit_hibernation() was overwritten
anyhow if hsotg->in_ppd was non-zero.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20221017195914.1426297-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The musb-davinci driver was only used on dm644x, which got removed
in linux-6.0. The only remaining davinci machines are da8xx
devicetree based and do not use this hardware.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device name is not reliable so using the type instead in
retimer_fwnode_match().
This will also introduce is_typec_retimer() helper, and
remove the static keyword from the retimer device type. That
will make it accessible also in the main typec class.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221019145552.32493-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the userspace it is needed to distinguish between requests for the
control or streaming interface. The userspace would have to parse the
configfs to know which interface index it has to compare the ctrl
requests against. Since the interface numbers are not fixed, e.g. for
composite gadgets, the interface offset depends on the setup.
The kernel has this information when handing over the ctrl request to
the userspace. This patch removes the offset from the interface numbers
and expose the default interface defines in the uapi g_uvc.h.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20221011075348.1786897-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Missing lock in sysfs operation when we want to close the connection in order
to check the status and send the down event in a safe way.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221003091016.641900-1-jtornosm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cdnsp_pci_remove, if pci_is_enabled returns true, it will
call cdns_remove; else it will call kfree. Then both control flow
goes to pci_dev_put.
Adjust this logic by modifying it to an if else.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20221009072305.1593707-1-dzm91@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221014110606.599352-1-zhangxuezhi3@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coccinnelle reports a warning
Warning: Use scnprintf or sprintf
Following the advice on kernel documentation
https://www.kernel.org/doc/html/latest/filesystems/sysfs.html
For show(device *...) functions we should only use sysfs_emit() or sysfs_emit_at()
especially when formatting the value to be returned to user space.
Convert snprintf() to sysfs_emit()
Signed-off-by: Jules Irenge <jules.irenge@postgrad.manchester.ac.uk>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/YzhVIaNGdM33pcts@octinomon
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable err_count is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221020130649.1546112-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When port is connected and then disconnected, the state stays as
configured. Which is incorrect as the port is no longer configured,
but in a not attached state.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: efed421a94 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checking the connection status of every port on resume. This
fixes an issue where the partner device is not unregistered
properly after resume if it was unplugged while the system
was suspended.
The function ucsi_check_connection() is also modified so
that it can be used also for registering the connection on
top of unregistering it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425
Fixes: a94ecde41f ("usb: typec: ucsi: ccg: enable runtime pm support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221007100951.43798-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit fc274c1e99 ("USB: gadget: Add a new bus for gadgets"),
the gadget devices are proper driver core devices, which caused each
device to request pinmux settings:
aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 mode
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin A7 already requested by 1e6a0000.usb-vhub; cannot claim for gadget.0
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin-232 (gadget.0) status -22
aspeed-g5-pinctrl 1e6e2080.pinctrl: could not request pin 232 (A7) from group USB2AD on device aspeed-g5-pinctrl
g_mass_storage gadget.0: Error applying setting, reverse things back
The vhub driver has already claimed the pins, so prevent the gadgets
from requesting them too by setting the magic of_node_reused flag. This
causes the driver core to skip the mux request.
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Link: https://lore.kernel.org/r/20221017053006.358520-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In uvc_video_encode_isoc_sg, the uvc_request's sg list is
incorrectly being populated leading to corrupt video being
received by the remote end. When building the sg list the
usage of buf->sg's 'dma_length' field is not correct and
instead its 'length' field should be used.
Fixes: e81e7f9a0e ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeff Vanhoof <qjv001@motorola.com>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-5-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is a transmission error the buffer will be returned too early,
causing a memory fault as subsequent requests for that buffer are still
queued up to be sent. Refactor the error handling to wait for the final
request to come in before reporting back the buffer to userspace for all
transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the
frame was successfully sent.
Fixes: e81e7f9a0e ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the re-use of the previous completion status in 0d1c407b1a
("usb: dwc3: gadget: Return proper request status") it could be possible
that the next frame would also get dropped if the current frame has a
missed isoc error. Ensure that an interrupt is requested for the start
of a new frame.
Fixes: fc78941d81 ("usb: gadget: uvc: decrease the interrupt load to a quarter")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-2-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget driver may wait on the request completion when it sets the
USB_GADGET_DELAYED_STATUS. Make sure that the End Transfer command can
go through if the dwc->delayed_status is set so that the request can
complete. When the delayed_status is set, the Setup packet is already
processed, and the next phase should be either Data or Status. It's
unlikely that the host would cancel the control transfer and send a new
Setup packet during End Transfer command. But if that's the case, we can
try again when ep0state returns to EP0_SETUP_PHASE.
Fixes: e1ee843488 ("usb: dwc3: gadget: Force sending delayed status during soft disconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3f9f59e5d74efcbaee444cf4b30ef639cc7b124e.1666146954.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the extcon device exists, get the mode from the extcon device. If
the controller is DRD and the driver is unable to determine the mode,
only then default the dr_mode to USB_DR_MODE_PERIPHERAL.
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 7a84e7353e ("Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"")
Cc: stable <stable@kernel.org>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20221017233510.53336-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
