A user reported a bug on CAPE VERDE system where uvd_v3_1
IP component failed to initialize as there is an issue with
BO move code from one memory to other.
In function amdgpu_mem_visible() called by amdgpu_bo_move(),
when there are no blocks to compare or if we have a single
block then break the loop.
Fixes: 312b4dc11d ("drm/amdgpu: Fix VRAM BO swap issue")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If mes is not dequeued during fini, mes will be in an uncleaned state
during reload, then mes couldn't receive some commands which leads to
reload failure.
[How]
Perform MES dequeue via MMIO after all the unmap jobs are done by mes
and before kiq fini.
v2: Move the dequeue operation inside kiq_hw_fini.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
L1 blocks most of GC registers accessing by MMIO.
[How]
Use RLCG interface to program GC registers under SRIOV VF in full access time.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with
an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp():
[ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794)
Clang's kernel Control Flow Integrity (kCFI) makes sure that all
indirect call targets have a type that exactly matches the function
pointer prototype. In this case, hqd_destroy()'s third parameter,
reset_type, should have a type of 'uint32_t' but every implementation of
this callback has a third parameter type of 'enum kfd_preempt_type'.
Update the function pointer prototype to match reality so that there is
no more CFI violation.
Link: https://github.com/ClangBuiltLinux/linux/issues/1738
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Building 32-bit images may fail with the following error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:
In function ‘dml32_UseMinimumDCFCLK’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1:
error: the frame size of 1096 bytes is larger than 1024 bytes
This is seen when building i386:allmodconfig with any of the following
compilers.
gcc (Debian 12.2.0-3) 12.2.0
gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0
The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY
because in that case CONFIG_FRAME_WARN is already set to 2048 even for
32-bit builds.
dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e4
("drm/amd/display: DML changes for DCN32/321"). It declares a large
number of local variables. Increase the frame size for the affected
file to 2048, similar to other files in the same directory, to enable
32-bit build tests with affected compilers.
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Łukasz Bartosik <ukaszb@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pmfw has changed the driver interface version, so keep same with the
fw.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the SMU driver interface version to V7.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't
be initialized. There will be a NULL pointer call trace after
removing the dpm check condition in amdgpu_pm_sysfs_fini.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu]
Call Trace:
<TASK>
amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu]
amdgpu_device_fini_hw+0xdf/0x290 [amdgpu]
[How]
List pm_attr_list should be initialized when dpm is disabled.
Fixes: a6ad27cec5 ("drm/amd/pm: Remove redundant check condition")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
skip loading pptable from driver on secure board since it's loaded from psp.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Guan Yu <Guan.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable gfx clock gating features on smu_v13_0_10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove the pptable id override on smu_v13_0_10,
and the id is fetched from vbios now.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail.
will enable it again after confirming the thermal hardware setting.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 16fb4dca95.
Unfortunately, that commit causes fan monitors can't be read and written
properly.
Fixes: 16fb4dca95 ("drm/amdgpu: getting fan speed pwm for vega10 properly")
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- refactor mode2 on v11.0.7 to align with aldebaran
- comment out using mode2 reset as default for now, will introduce
another controller to replace previous reset_level_mask
v2: squash in unused variable removal (Alex)
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit dac6b80818.
This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with
the original design of reset handler. Will redesign it.
Fixes: dac6b80818 ("drm/amdgpu: let mode2 reset fallback to default when failure")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5bd8d53f6f.
This commit breaks the reset logic for aldebaran, revert it for now.
Will move the mask inside the reset handler.
Fixes: 5bd8d53f6f ("drm/amdgpu: add debugfs amdgpu_reset_level")
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For asic with VF MMIO access protection avoid using CPU for VM table updates.
CPU pagetable updates have issues with HDP flush as VF MMIO access protection
blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register
during sriov runtime.
v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT
which indicates that VF MMIO write access is not allowed in sriov runtime
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY08JQQAKCRDbK58LschI
g0M0AQCWGrJcnQFut1qwR9efZUadwxtKGAgpaA/8Smd8+v7c8AD/SeHQuGfkFiD6
rx18hv1mTfG0HuPnFQy6YZQ98vmznwE=
=DaeS
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-10-18
We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).
The main changes are:
1) Add RCU grace period chaining to BPF to wait for the completion
of access from both sleepable and non-sleepable BPF programs,
from Hou Tao & Paul E. McKenney.
2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
values. In the wild we have seen OS vendors doing buggy backports
where helper call numbers mismatched. This is an attempt to make
backports more foolproof, from Andrii Nakryiko.
3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
from Roberto Sassu.
4) Fix libbpf's BTF dumper for structs with padding-only fields,
from Eduard Zingerman.
5) Fix various libbpf bugs which have been found from fuzzing with
malformed BPF object files, from Shung-Hsi Yu.
6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
from Jie Meng.
7) Fix various ASAN bugs in both libbpf and selftests when running
the BPF selftest suite on arm64, from Xu Kuohai.
8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
from Jiri Olsa.
9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
on symlinked iptables which got upgraded to iptables-nft,
from Martin KaFai Lau.
10) Minor BPF selftest improvements all over the place, from various others.
* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
bpf/docs: Update README for most recent vmtest.sh
bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
bpf: Use rcu_trace_implies_rcu_gp() in local storage map
bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
rcu-tasks: Provide rcu_trace_implies_rcu_gp()
selftests/bpf: Use sys_pidfd_open() helper when possible
libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
libbpf: Deal with section with no data gracefully
libbpf: Use elf_getshdrnum() instead of e_shnum
selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
selftest/bpf: Fix memory leak in kprobe_multi_test
selftests/bpf: Fix memory leak caused by not destroying skeleton
libbpf: Fix memory leak in parse_usdt_arg()
libbpf: Fix use-after-free in btf_dump_name_dups
selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
selftests/bpf: Alphabetize DENYLISTs
selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
libbpf: Introduce bpf_link_get_fd_by_id_opts()
libbpf: Introduce bpf_btf_get_fd_by_id_opts()
...
====================
Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ed5c2f5fd1 ("i2c: Make remove callback return void") changed
the return type of the 'remove' callback to void, but this driver was
originally written before that change landed. Update the remove callback
to match.
Fixes: 5f9952548d ("platform/chrome: add a driver for HPS")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Callaghan <dcallagh@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221018235237.2274969-1-dcallagh@chromium.org
For a long time we have rejoiced that our HTML output from Sphinx is far
better than what we got from the old DocBook toolchain. But it still
leaves a lot to be desired; the following is an attempt to improve the
situation somewhat.
Sphinx has a theming mechanism for HTML rendering. Since the kernel's
adoption of Sphinx, we have been using the "Read The Docs" theme — a choice
made in a bit of a hurry to have *something* while figuring out the rest.
RTD is OK, but it is not hugely attractive, requires the installation of an
extra package, and does not observe all of the Sphinx configuration
parameters. Among other things, that makes it hard to put reasonable
contents into the left column in the HTML output.
The Alabaster theme is the default for Sphinx installations, and is bundled
with Sphinx itself. It has (IMO) nicer output and gives us the control
that we need.
So: switch to Alabaster. Additional patches adjust the documentation and
remove the RTD references from scripts/sphinx-pre-install.
The penultimate patch changes the way that kerneldoc declarations are
rendered to (IMO) improve readability. That requires some changes to
kernel-doc to output a new container block and some CSS tweaks to improve
things overall.
It should be noted that I have a long history of inflicting ugly web
designs on the net; this work is a start, but I think we could do far
better yet. It would be great if somebody who actually enjoys working with
CSS and such would help to improve what we have.
Remove the ancient support for the Sphinx "classic" theme; everybody will
have alabaster, so that fallback is no longer needed.
While in the neighborhood: get rid of lots of useless comment lines. They
describe the state of Sphinx options when we first created that file and
are just clutter now.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Make a few changes to cause functions documented by kerneldoc to stand out
better in the rendered documentation. Specifically, change kernel-doc to
put the description section into a ".. container::" section, then add a bit
of CSS to indent that section relative to the function prototype (or struct
or enum definition). Tweak a few other CSS parameters while in the
neighborhood to improve the formatting.
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Translate this commit to Korean:
203185f6b1 ("Fix confusing name of 'data dependency barrier'")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Yunjae Lee <lyj7694@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Translate this commit to Korean:
ed59dfd950 ("asm-generic: Add memory barrier dma_mb()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Yunjae Lee <lyj7694@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Translate this commit to Korean:
d5624bb29f ("asm-generic: introduce io_stop_wc() and add implementation for ARM64")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Yunjae Lee <lyj7694@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The description of io_stop_wc(), which was added by commit d5624bb29f
("asm-generic: introduce io_stop_wc() and add implementation for ARM64"),
has an unclosed parenthesis. This commit closes it.
Fixes: d5624bb29f ("asm-generic: introduce io_stop_wc() and add implementation for ARM64")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current informal control dependency definition in explanation.txt is
too broad and, as discussed, needs to be updated.
Consider the following example:
> if(READ_ONCE(x))
> return 42;
>
> WRITE_ONCE(y, 42);
>
> return 21;
The read event determines whether the write event will be executed "at all"
- as per the current definition - but the formal LKMM does not recognize
this as a control dependency.
Introduce a new definition which includes the requirement for the second
memory access event to syntactically lie within the arm of a non-loop
conditional.
Link: https://lore.kernel.org/all/20220615114330.2573952-1-paul.heidekrueger@in.tum.de/
Cc: Marco Elver <elver@google.com>
Cc: Charalampos Mainas <charalampos.mainas@gmail.com>
Cc: Pramod Bhatotia <pramod.bhatotia@in.tum.de>
Cc: Soham Chakraborty <s.s.chakraborty@tudelft.nl>
Cc: Martin Fink <martin.fink@in.tum.de>
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@in.tum.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Fix trivial typo in Kconfig help comments in KCSAN_SKIP_WATCH and
KCSAN_SKIP_WATCH_RANDOMIZE
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds KCSAN's volatile instrumentation to objtool's uaccess whitelist.
Recent kernel change have shown that this was missing from the uaccess
whitelist (since the first upstreamed version of KCSAN):
mm/gup.o: warning: objtool: fault_in_readable+0x101: call to __tsan_volatile_write1() with UACCESS enabled
Fixes: 75d75b7a4d ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
With Clang version 16+, -fsanitize=thread will turn
memcpy/memset/memmove calls in instrumented functions into
__tsan_memcpy/__tsan_memset/__tsan_memmove calls respectively.
Add these functions to the core KCSAN runtime, so that we (a) catch data
races with mem* functions, and (b) won't run into linker errors with
such newer compilers.
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes torture.sh to use the new --bootargs and --datestamp
parameters to kvm-again.sh in order to avoid redundant kernel builds
during rcuscale and refscale testing. This trims the better part of an
hour off of torture.sh runs that use --do-kasan.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a --datestamp parameter to kvm-again.sh, which, in
contrast to the existing --rundir argument, specifies only the last
segments of the pathname. This addition enables torture.sh to use
kvm-again.sh in order to avoid redundant kernel builds.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
As it should, the kvm-recheck.sh script sets the TORTURE_SUITE bash
variable based on the type of rcutorture test being run. However,
it does not export it. Which is OK, at least until you try running
kvm-again.sh on either a rcuscale or a refscale test, at which point you
get false-positive "no success message, N successful version messages"
errors. This commit therefore causes the kvm-recheck.sh script to export
TORTURE_SUITE, suppressing these false positives.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script, when running locally, can place the QEMU output
into kvm-test-1-run-qemu.sh.out instead of kvm-test-1-run.sh.out. This
commit therefore makes kvm-test-1-run-qemu.sh check both locations.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit drags the rcutorture scripting kicking and screaming into the
twenty-first century by making use of the BSD-derived mktemp command to
create temporary files and directories. In happy contrast to many of its
ill-behaved predecessors, mktemp seems to actually work reasonably reliably!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script can be used to repeat short boot-time tests,
but the kernel boot arguments cannot be changed. This means that every
change in kernel boot arguments currently necessitates a kernel build,
which greatly increases the duration of kernel-boot testing.
This commit therefore adds a --bootargs parameter to kvm-again.sh,
which allows a given kernel to be repeatedly booted, but overriding
old and adding new kernel boot parameters. This allows an old kernel
to be booted with new kernel boot parameters, avoiding the overhead of
rebuilding the kernel under test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to the RTWS_POLL_GET case of rcu_torture_writer()
to verify that the value of NUM_ACTIVE_RCU_POLL_OLDSTATE is sufficiently
large
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to the RTWS_POLL_GET_FULL case
of rcu_torture_writer() to verify that the value of
NUM_ACTIVE_RCU_POLL_FULL_OLDSTATE is sufficiently large.
[ paulmck: Fix whitespace issue located by checkpatch.pl. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In preparation for RCU lazy changes, wake up the RCU nocb gp thread if
needed after an entrain. This change prevents the RCU barrier callback
from waiting in the queue for several seconds before the lazy callbacks
in front of it are serviced.
Reported-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the bypass cblist gets too big or its timeout has occurred, it is
flushed into the main cblist. However, the bypass timer is still running
and the behavior is that it would eventually expire and wake the GP
thread.
Since we are going to use the bypass cblist for lazy CBs, do the wakeup
soon as the flush for "too big or too long" bypass list happens.
Otherwise, long delays can happen for callbacks which get promoted from
lazy to non-lazy.
This is a good thing to do anyway (regardless of future lazy patches),
since it makes the behavior consistent with behavior of other code paths
where flushing into the ->cblist makes the GP kthread into a
non-sleeping state quickly.
[ Frederic Weisbecker: Changes to avoid unnecessary GP-thread wakeups plus
comment changes. ]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In kernels built with either CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y or
CONFIG_NO_HZ_FULL=y, additional CPUs must be added to rcu_nocb_mask.
Except that kernels booted without the rcu_nocbs= will not have
allocated rcu_nocb_mask. And the current rcu_init_nohz() function uses
its need_rcu_nocb_mask and offload_all local variables to track the
rcu_nocb and nohz_full state.
But there is a much simpler approach, namely creating a cpumask pointer
to track the default and then using cpumask_available() to check the
rcu_nocb_mask state. This commit takes this approach, thereby simplifying
and shortening the rcu_init_nohz() function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rnp->qsmask is locklessly accessed from rcutree_dying_cpu(). This
may help avoid load tearing due to concurrent access, KCSAN
issues, and preserve sanity of people reading the mask in tracing.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
