Correct CPU BWMON unit address to match the "reg" property.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Fixes: b2f3eac1b7 ("arm64: dts: qcom: sc7280: Add cpu and llcc BWMON")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908085830.39141-1-krzysztof.kozlowski@linaro.org
Add tune function for the HiSilicon Tune and Trace device. The interface
of tune is exposed through sysfs attributes of PTT PMU device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-4-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex integrated
Endpoint(RCiEP) device, providing the capability to dynamically monitor and
tune the PCIe traffic and trace the TLP headers.
Add the driver for the device to enable the trace function. Register PMU
device of PTT trace, then users can use trace through perf command. The
driver makes use of perf AUX trace function and support the following
events to configure the trace:
- filter: select Root port or Endpoint to trace
- type: select the type of traced TLP headers
- direction: select the direction of traced TLP headers
- format: select the data format of the traced TLP headers
This patch initially add basic trace support of PTT device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-3-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The DMA operations of HiSilicon PTT device can only work properly with
identical mappings. So add a quirk for the device to force the domain
as passthrough.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220816114414.4092-2-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
A recent patch moved ACL setting into nfsd_setattr().
Unfortunately it didn't work as nfsd_setattr() aborts early if
iap->ia_valid is 0.
Remove this test, and instead avoid calling notify_change() when
ia_valid is 0.
This means that nfsd_setattr() will now *always* lock the inode.
Previously it didn't if only a ATTR_MODE change was requested on a
symlink (see Commit 15b7a1b86d ("[PATCH] knfsd: fix setattr-on-symlink
error return")). I don't think this change really matters.
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Recent changes breaks HCIGETDEVINFO since it changes the size of
hci_dev_info.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Users may have explicitly configured their tracefs permissions; we
shouldn't overwrite those just because a second mount appeared.
Only clobber if the options were provided at mount time.
Note: the previous behavior was especially surprising in the presence of
automounted /sys/kernel/debug/tracing/.
Existing behavior:
## Pre-existing status: tracefs is 0755.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
## (Re)trigger the automount.
# umount /sys/kernel/debug/tracing
# stat -c '%A' /sys/kernel/debug/tracing/.
drwx------
## Unexpected: the automount changed mode for other mount instances.
# stat -c '%A' /sys/kernel/tracing/
drwx------
New behavior (after this change):
## Pre-existing status: tracefs is 0755.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
## (Re)trigger the automount.
# umount /sys/kernel/debug/tracing
# stat -c '%A' /sys/kernel/debug/tracing/.
drwxr-xr-x
## Expected: the automount does not change other mount instances.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb7226790d44406@changeid
Cc: stable@vger.kernel.org
Fixes: 4282d60689 ("tracefs: Add new tracefs file system")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
SBI firmware should report total number of firmware and hardware counters
including unused ones or special ones. In this case the kernel doesn't need
to make any assumptions about gaps in reported counters, e.g. excluded timer
counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect
if SBI firmware behaves correctly. However it eliminates access beyond the
allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1.
Fixes: e999143459 ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220830155306.301714-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
SBI firmware may not provide information for some counters in response
to SBI_EXT_PMU_COUNTER_GET_INFO call. Exclude such counters from the
subsequent SBI requests. For this purpose use global mask to keep track
of fully specified counters.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220830155306.301714-3-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The labels were backward with respect to the register values. The SRAM
is mapped to the CPU when the register value is 1.
Fixes: 5e4fb64297 ("drivers: soc: sunxi: add support for A64 and its SRAM C")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-7-samuel@sholland.org
VM_FAULT_NOPAGE is expected behaviour for -EBUSY failure path, when
augmenting a page, as this means that the reclaimer thread has been
triggered, and the intention is just to round-trip in ring-3, and
retry with a new page fault.
Fixes: 5a90d2c3f5 ("x86/sgx: Support adding of pages to an initialized enclave")
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220906000221.34286-3-jarkko@kernel.org
Errors from debugfs are intended to be non-fatal, and should not prevent
the driver from probing.
Since debugfs file creation is treated as infallible, move it below the
parts of the probe function that can fail. This prevents an error
elsewhere in the probe function from causing the file to leak. Do the
same for the call to of_platform_populate().
Finally, checkpatch suggests an octal literal for the file permissions.
Fixes: 4af34b572a ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Fixes: 5828729beb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org
Unsanitized pages trigger WARN_ON() unconditionally, which can panic the
whole computer, if /proc/sys/kernel/panic_on_warn is set.
In sgx_init(), if misc_register() fails or misc_register() succeeds but
neither sgx_drv_init() nor sgx_vepc_init() succeeds, then ksgxd will be
prematurely stopped. This may leave unsanitized pages, which will result a
false warning.
Refine __sgx_sanitize_pages() to return:
1. Zero when the sanitization process is complete or ksgxd has been
requested to stop.
2. The number of unsanitized pages otherwise.
Fixes: 51ab30eb2a ("x86/sgx: Replace section->init_laundry_list with sgx_dirty_page_list")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-sgx/20220825051827.246698-1-jarkko@kernel.org/T/#u
Link: https://lkml.kernel.org/r/20220906000221.34286-2-jarkko@kernel.org
This driver exports a regmap tied to the platform device (as opposed to
a syscon, which exports a regmap tied to the OF node). Because of this,
the driver can never be unbound, as that would destroy the regmap. Use
builtin_platform_driver_probe() to enforce this limitation.
Fixes: 5828729beb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-5-samuel@sholland.org
sunxi_sram_claim() checks the sram_desc->claimed flag before updating
the register, with the intent that only one device can claim a region.
However, this was ineffective because the flag was never set.
Fixes: 4af34b572a ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-4-samuel@sholland.org
The underlying hardware may or may not allow reading of the head or tail
registers and it really makes no difference if we use the software
cached values. So, always used the software cached values.
Fixes: 9c6c12595b ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously changing mac address gives false negative because
ip link set <interface> address <MAC> return with
RTNLINK: Permission denied.
In iavf_set_mac was check if PF handled our mac set request,
even before filter was added to list.
Because this check returns always true and it never waits for
PF's response.
Move iavf_is_mac_handled to wait_event_interruptible_timeout
instead of false. Now it will wait for PF's response and then
check if address was added or rejected.
Fixes: 35a2443d09 ("iavf: Add waiting for response from PF in set mac")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Devfreq cooling device framework is used in Panfrost
to throttle GPU in order to regulate its temperature.
Enable this driver for ARM64 SoC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220906153034.153321-2-peron.clem@gmail.com
Add an Operating Performance Points table for the GPU to
enable Dynamic Voltage & Frequency Scaling on the H6.
The voltage range is set with minimal voltage set to the target
and the maximal voltage set to 1.2V. This allow DVFS framework to
work properly on board with fixed regulator.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220906153034.153321-4-peron.clem@gmail.com
Add a simple cooling map for the GPU.
This cooling map come from the vendor kernel 4.9 with a
2°C hysteresis added.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220906153034.153321-3-peron.clem@gmail.com
The I2C controllers in the A100 SoC are all connected to the DMA engine.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org
The A100 SoC has a DMA controller that supports 8 DMA channels
to and from various peripherals.
Add a device node for it.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220827094151.3323450-3-yangyingliang@huawei.com
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220827094151.3323450-2-yangyingliang@huawei.com
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220827094151.3323450-1-yangyingliang@huawei.com
Now that everything is ready set the driver DMA logging callbacks if
supported by the device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Handle async error events and health/recovery flow to safely stop the
tracker upon error scenarios.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Report dirty pages from tracker.
It includes:
Querying for dirty pages in a given IOVA range, this is done by
modifying the tracker into the reporting state and supplying the
required range.
Using the CQ event completion mechanism to be notified once data is
ready on the CQ/QP to be processed.
Once data is available turn on the corresponding bits in the bit map.
This functionality will be used as part of the 'log_read_and_clear'
driver callback in the next patches.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for creating and destroying page tracker object.
This object is used to control/report the device dirty pages.
As part of creating the tracker need to consider the device capabilities
for max ranges and adapt/combine ranges accordingly.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Init QP based resources for dirty tracking to be used upon start
logging.
It includes:
Creating the host and firmware RC QPs, move each of them to its expected
state based on the device specification, etc.
Creating the relevant resources which are needed by both QPs as of UAR,
PD, etc.
Creating the host receive side resources as of MKEY, CQ, receive WQEs,
etc.
The above resources are cleaned-up upon stop logging.
The tracker object that will be introduced by next patches will use
those resources.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce the DMA logging feature support in the vfio core layer.
It includes the processing of the device start/stop/report DMA logging
UAPIs and calling the relevant driver 'op' to do the work.
Specifically,
Upon start, the core translates the given input ranges into an interval
tree, checks for unexpected overlapping, non aligned ranges and then
pass the translated input to the driver for start tracking the given
ranges.
Upon report, the core translates the given input user space bitmap and
page size into an IOVA kernel bitmap iterator. Then it iterates it and
call the driver to set the corresponding bits for the dirtied pages in a
specific IOVA range.
Upon stop, the driver is called to stop the previous started tracking.
The next patches from the series will introduce the mlx5 driver
implementation for the logging ops.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The new facility adds a bunch of wrappers that abstract how an IOVA range
is represented in a bitmap that is granulated by a given page_size. So it
translates all the lifting of dealing with user pointers into its
corresponding kernel addresses backing said user memory into doing finally
the (non-atomic) bitmap ops to change various bits.
The formula for the bitmap is:
data[(iova / page_size) / 64] & (1ULL << (iova % 64))
Where 64 is the number of bits in a unsigned long (depending on arch)
It introduces an IOVA iterator that uses a windowing scheme to minimize the
pinning overhead, as opposed to pinning it on demand 4K at a time. Assuming
a 4K kernel page and 4K requested page size, we can use a single kernel
page to hold 512 page pointers, mapping 2M of bitmap, representing 64G of
IOVA space.
An example usage of these helpers for a given @base_iova, @page_size,
@length and __user @data:
bitmap = iova_bitmap_alloc(base_iova, page_size, length, data);
if (IS_ERR(bitmap))
return -ENOMEM;
ret = iova_bitmap_for_each(bitmap, arg, dirty_reporter_fn);
iova_bitmap_free(bitmap);
Each iteration of the @dirty_reporter_fn is called with a unique @iova
and @length argument, indicating the current range available through the
iova_bitmap. The @dirty_reporter_fn uses iova_bitmap_set() to mark dirty
areas (@iova_length) within that provided range, as following:
iova_bitmap_set(bitmap, iova, iova_length);
The facility is intended to be used for user bitmaps representing dirtied
IOVAs by IOMMU (via IOMMUFD) and PCI Devices (via vfio-pci).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
DMA logging allows a device to internally record what DMAs the device is
initiating and report them back to userspace. It is part of the VFIO
migration infrastructure that allows implementing dirty page tracking
during the pre copy phase of live migration. Only DMA WRITEs are logged,
and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
This patch introduces the DMA logging involved uAPIs.
It uses the FEATURE ioctl with its GET/SET/PROBE options as of below.
It exposes a PROBE option to detect if the device supports DMA logging.
It exposes a SET option to start device DMA logging in given IOVAs
ranges.
It exposes a SET option to stop device DMA logging that was previously
started.
It exposes a GET option to read back and clear the device DMA log.
Extra details exist as part of vfio.h per a specific option.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220908183448.195262-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Some calls to synthesis functions set err < 0 but only warn about the
failure and continue. However they do not set err back to zero, relying
on subsequent code to do that.
That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.
Fix by setting err = 0 in those cases.
Example:
Before:
$ perf record --no-bpf-event --synth=all -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
After:
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
Fixes: 41b740b6e8 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
install(1), by default, installs with rwxr-xr-x permissions. Modify
perf's Makefile to pass '-m 644' when installing:
* Documentation/tips.txt
* examples/bpf/*
* perf-completion.sh
* perf_dlfilter.h header
* scripts/perl/Perf-Trace-Util/lib/Perf/Trace/*
* scripts/perl/*.pl
* tests/attr/*
* tests/attr.py
* tests/shell/lib/*.sh
* trace/strace/groups/*
All those are supposed to be non-executable. Either they are not scripts
at all, or they don't have shebang.
Signed-off-by: <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908060426.9619-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.
The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).
When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.
This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.
This change is needed for all places that use pvt->v_num or vm_num
later on in the code.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change "intel,vm-map" property to be optional instead of required.
The driver implementation indicates it is not mandatory to have
"intel,vm-map" in the device tree:
- probe doesn't fail in case it is absent.
- explicit comment in code - "Incase intel,vm-map property is not
defined, we assume incremental channel numbers".
Fixes: 748022ef09 ("hwmon: Add DT bindings schema for PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-2-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Current i10nm_edac only supports firmware decoder (ACPI DSM methods).
MCA bank registers of Ice Lake or Tremont CPUs contain the information
to decode DDR memory errors. To get better decoding performance, add
the driver decoder (decoding DDR memory errors via extracting error
information from MCA bank registers) for Ice Lake and Tremont CPUs.
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
The decoded output format of driver decoder is different from the
output format of firmware decoder. Make output format similar regardless
of decode function (Align driver decoder's to firmware decoder's).
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/
The performance of driver decoder[1] is better than the performance
of firmware decoder[2], especially on frequent correctable errors.
So use the driver decoder first, fall back to firmware decoder if
the driver decoder is unavailable. Also rename the function pointer
skx_decode to driver_decode (better name to contrast with adxl_decode).
[1] Decode errors by extracting error information from registers of
memory controllers and/or MCA bank registers.
[2] Decode errors by calling ACPI DSM methods.
Co-developed-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20220901194310.115427-1-tony.luck@intel.com/