Commit graph

1,189,987 commits

Author SHA1 Message Date
Jim Cromie
c45f67ace8 dyndbg: add ddebug_attach_module_classes
Add ddebug_attach_module_classes(), call it from ddebug_add_module().
It scans the classes/section its given, finds records where the
module-name matches the module being added, and adds them to the
module's maps list.  No locking here, since the record
isn't yet linked into the ddebug_tables list.

It is called indirectly from 2 sources:

 - from load_module(), where it scans the module's __dyndbg_classes
   section, which contains DYNAMIC_DEBUG_CLASSES definitions from just
   the module.

 - from dynamic_debug_init(), where all DYNAMIC_DEBUG_CLASSES
   definitions of each builtin module have been packed together.
   This is why ddebug_attach_module_classes() checks module-name.

NOTES

Its (highly) likely that builtin classes will be ordered by module
name (just like prdbg descriptors are in the __dyndbg section).  So
the list can be replaced by a vector (ptr + length), which will work
for loaded modules too.  This would imitate whats currently done for
the _ddebug descriptors.

That said, converting to vector,len is close to pointless; a small
minority of modules will ever define a class-map, and almost all of
them will have only 1 or 2 class-maps, so theres only a couple dozen
pointers to save.  TODO: re-evaluate for lines removable.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-17-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie
66f4006b6a kernel/module: add __dyndbg_classes section
Add __dyndbg_classes section, using __dyndbg as a model. Use it:

vmlinux.lds.h:

KEEP the new section, which also silences orphan section warning on
loadable modules.  Add (__start_/__stop_)__dyndbg_classes linker
symbols for the c externs (below).

kernel/module/main.c:
- fill new fields in find_module_sections(), using section_objs()
- extend callchain prototypes
  to pass classes, length
  load_module(): pass new info to dynamic_debug_setup()
  dynamic_debug_setup(): new params, pass through to ddebug_add_module()

dynamic_debug.c:
- add externs to the linker symbols.

ddebug_add_module():
- It currently builds a debug_table, and *will* find and attach classes.

dynamic_debug_init():
- add class fields to the _ddebug_info cursor var: di.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie
aad0214f30 dyndbg: add DECLARE_DYNDBG_CLASSMAP macro
Using DECLARE_DYNDBG_CLASSMAP, modules can declare up to 31 classnames.
By doing so, they authorize dyndbg to manipulate class'd prdbgs (ie:
__pr_debug_cls, and soon drm_*dbg), ala::

   :#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control

The macro declares and initializes a static struct ddebug_class_map::

 - maps approved class-names to class_ids used in module,
   by array order. forex: DRM_UT_*
 - class-name vals allow validation of "class FOO" queries
   using macro is opt-in
 - enum class_map_type - determines interface, behavior

Each module has its own class-type and class_id space, and only known
class-names will be authorized for a manipulation.  Only DRM modules
should know and respont to this:

  :#> echo class DRM_UT_CORE +p > control	# across all modules

pr_debugs (with default class_id) are still controllable as before.

DECLARE_DYNDBG_CLASSMAP(_var, _maptype, _base, classes...) is::

 _var: name of the static struct var. user passes to module_param_cb()
       if they want a sysfs node.

 _maptype: this is hard-coded to DD_CLASS_TYPE_DISJOINT_BITS for now.

 _base: usually 0, it allows splitting 31 classes into subranges, so
 	that multiple classes / sysfs-nodes can share the module's
 	class-id space.

 classes: list of class_name strings, these are mapped to class-ids
 	  starting at _base.  This class-names list must have a
 	  corresponding ENUM, with SYMBOLS that match the literals,
 	  and 1st enum val = _base.

enum class_map_type has 4 values, on 2 factors::

 - classes are disjoint/independent vs relative/x<y/verbosity.
   disjoint is basis, verbosity by overlay.

 - input NUMBERS vs [+-]CLASS_NAMES
   uints, ideally hex.  vs  +DRM_UT_CORE,-DRM_UT_KMS

DD_CLASS_TYPE_DISJOINT_BITS: classes are separate, one per bit.
   expecting hex input. built for drm.debug, basis for other types.

DD_CLASS_TYPE_DISJOINT_NAMES: input is a CSV of [+-]CLASS_NAMES,
   classes are independent, like DISJOINT

DD_CLASS_TYPE_LEVEL_NUM: input is numeric level, 0-N.
   0 implies silence. use printk to break that.
   relative levels applied on bitmaps.

DD_CLASS_TYPE_LEVEL_NAMES: input is a CSV of [+-]CLASS_NAMES,
   names like: ERR,WARNING,NOTICE,INFO,DEBUG
   avoiding EMERG,ALERT,CRIT,ERR - no point.

NOTES:

The macro places the initialized struct ddebug_class_map into the
__dyndbg_classes section.  That draws an 'orphan' warning which we
handle in the next commit.  The struct attributes are necessary:
__aligned(8) fixed null-ptr derefs, and __used is needed by drm
drivers, which declare class-maps, but don't also declare a
sysfs-param, and thus dont ref the classmap.  The __used insures that
the linkage is made, then the class-map is found at load-time.

While its possible to handle both NAMES and NUMBERS in the same
sys-interface, there is ambiguity to avoid, by disallowing them
together.  Later, if ambiguities are resolved, 2 new enums can permit
both inputs, on verbose & independent types separately, and authors
can select the interface style they like.

The plan is to implement LEVELS in the callbacks, outside of
ddebug_exec_query(), which for simplicity will treat the CLASSES in
the map as disjoint.  The callbacks can see map-type, and apply ++/--
loops (or bitops) to force the relative meanings across the
class-bitmap.

RFC: That leaves 2 issues:

1. doing LEVELs in callbacks means that the native >control interface
doesn't enforce the LEVELS relationship, so you could confusingly have
V3 enabled, but V1 disabled.  OTOH, the control iface already allows
infinite tweaking of the underlying callsites; sysfs node readback can
only tell the user what they previously wrote.

2. All dyndbg >control reduces to a query/command, includes +/-, which
is at-root a kernel patching operation with +/- semantics.  And the
_NAMES handling exposes it to the user, making it API-adjacent.

And its not just >control where +/- gets used (which is settled), the
new place is with sysfs-nodes exposing _*_NAMES classes, and here its
subtly different.

_DISJOINT_NAMES: is simple, independent
_LEVEL_NAMES: masks-on bits 0 .. N-1, N..max off

  # turn on L3,L2,L1 others off
  echo +L3 > /sys/module/test_dynamic_debug/parameters/p_level_names

  # turn on L2,L1 others off
  echo -L3 > /sys/module/test_dynamic_debug/parameters/p_level_names

IOW, the - changes the threshold-on bitpos by 1.

Alternatively, we could treat the +/- as half-duplex, where -L3 turns
off L>2 (and ignores L1), and +L2 would turn on L<=2 (and ignore others).

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-15-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie
3fc95d80a5 dyndbg: add __pr_debug_cls for testing
For selftest purposes, add __pr_debug_cls(class, fmt, ...)

I didn't think we'd need to define this, since DRM effectively has it
already in drm_dbg, drm_devdbg.  But test_dynamic_debug needs it in
order to demonstrate all the moving parts.

Note the __ prefix; its not intended for general use, at least until a
need emerges.  ISTM the drm.debug model (macro wrappers inserting enum
const 1st arg) is the baseline approach.

That said, nouveau might want it for easy use in its debug macros. TBD.

NB: it does require a builtin-constant class, __pr_debug_cls(i++, ...)
is disallowed by compiler.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-14-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie
ca90fca7f7 dyndbg: add class_id to pr_debug callsites
DRM issues ~10 exclusive categories of debug messages; to represent
this directly in dyndbg, add a new 6-bit field: struct _ddebug.class_id.
This gives us 64 classes, which should be more than enough.

  #> echo 0x012345678 > /sys/module/drm/parameters/debug

All existing callsites are initialized with _DPRINTK_CLASS_DFLT, which
is 2^6-1.  This reserves 0-62 for use in new categorized/class'd
pr_debugs, which fits perfectly with natural enums (ints: 0..N).

Thats done by extending the init macro: DEFINE_DYNAMIC_DEBUG_METADATA()
with _CLS(cls, ...) suffix, and redefing old name using extended name.

Then extend the factory macro callchain with _cls() versions to provide
the callsite.class_id, with old-names passing _DPRINTK_CLASS_DFLT.

This sets us up to create class'd prdebug callsites (class'd callsites
are those with .class_id != _DPRINTK_CLASS_DFLT).

No behavior change.

cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-13-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:48 +02:00
Jim Cromie
b7b4eebdba dyndbg: gather __dyndbg[] state into struct _ddebug_info
This new struct composes the linker provided (vector,len) section,
and provides a place to add other __dyndbg[] state-data later:

  descs - the vector of descriptors in __dyndbg section.
  num_descs - length of the data/section.

Use it, in several different ways, as follows:

In lib/dynamic_debug.c:

ddebug_add_module(): Alter params-list, replacing 2 args (array,index)
with a struct _ddebug_info * containing them both, with room for
expansion.  This helps future-proof the function prototype against the
looming addition of class-map info into the dyndbg-state, by providing
a place to add more member fields later.

NB: later add static struct _ddebug_info builtins_state declaration,
not needed yet.

ddebug_add_module() is called in 2 contexts:

In dynamic_debug_init(), declare, init a struct _ddebug_info di
auto-var to use as a cursor.  Then iterate over the prdbg blocks of
the builtin modules, and update the di cursor before calling
_add_module for each.

Its called from kernel/module/main.c:load_info() for each loaded
module:

In internal.h, alter struct load_info, replacing the dyndbg array,len
fields with an embedded _ddebug_info containing them both; and
populate its members in find_module_sections().

The 2 calling contexts differ in that _init deals with contiguous
subranges of __dyndbgs[] section, packed together, while loadable
modules are added one at a time.

So rename ddebug_add_module() into outer/__inner fns, call __inner
from _init, and provide the offset into the builtin __dyndbgs[] where
the module's prdbgs reside.  The cursor provides start, len of the
subrange for each.  The offset will be used later to pack the results
of builtin __dyndbg_sites[] de-duplication, and is 0 and unneeded for
loadable modules,

Note:

kernel/module/main.c includes <dynamic_debug.h> for struct
_ddeubg_info.  This might be prone to include loops, since its also
included by printk.h.  Nothing has broken in robot-land on this.

cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-12-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:48 +02:00
Jim Cromie
aa86a15453 dyndbg: cleanup auto vars in dynamic_debug_init
rework var-names for clarity, regularity
rename variables
  - n to mod_sites - it counts sites-per-module
  - entries to i - display only
  - iter_start to iter_mod_start - marks start of each module's subrange
  - modct to mod_ct - stylistic

new iterator var:
  - site - cursor parallel to iter
    1st step towards 'demotion' of iter->site, for removal later

treat vars as iters:
  - drop init at top
    init just above for-loop, in a textual block

Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-11-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:48 +02:00
Yacan Liu
e9b1a4f867 net/smc: Fix possible access to freed memory in link clear
After modifying the QP to the Error state, all RX WR would be completed
with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not
wait for it is done, but destroy the QP and free the link group directly.
So there is a risk that accessing the freed memory in tasklet context.

Here is a crash example:

 BUG: unable to handle page fault for address: ffffffff8f220860
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060
 Oops: 0002 [#1] SMP PTI
 CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S         OE     5.10.0-0607+ #23
 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018
 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0
 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086
 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000
 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00
 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b
 R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010
 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040
 FS:  0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  _raw_spin_lock_irqsave+0x30/0x40
  mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib]
  smc_wr_rx_tasklet_fn+0x56/0xa0 [smc]
  tasklet_action_common.isra.21+0x66/0x100
  __do_softirq+0xd5/0x29c
  asm_call_irq_on_stack+0x12/0x20
  </IRQ>
  do_softirq_own_stack+0x37/0x40
  irq_exit_rcu+0x9d/0xa0
  sysvec_call_function_single+0x34/0x80
  asm_sysvec_call_function_single+0x12/0x20

Fixes: bd4ad57718 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR")
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 16:00:48 +01:00
Jim Cromie
e26ef3af96 dyndbg: drop EXPORTed dynamic_debug_exec_queries
This exported fn is unused, and will not be needed. Lets dump it.

The export was added to let drm control pr_debugs, as part of using
them to avoid drm_debug_enabled overheads.  But its better to just
implement the drm.debug bitmap interface, then its available for
everyone.

Fixes: a2d375eda7 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Fixes: 4c0d77828d ("dyndbg: export ddebug_exec_queries")
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
683263a5e0 dyndbg: add test_dynamic_debug module
Provide a simple module to allow testing DYNAMIC_DEBUG behavior.  It
calls do_prints() from module-init, and with a sysfs-node.

  dmesg -C
  dmesg -w &
  modprobe test_dynamic_debug dyndbg=+p
  echo 1 > /sys/module/dynamic_debug/parameters/verbose

  cat /sys/module/test_dynamic_debug/parameters/do_prints
  echo module test_dynamic_debug +mftl > /proc/dynamic_debug/control
  echo junk > /sys/module/test_dynamic_debug/parameters/do_prints

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
e75ef56f74 dyndbg: let query-modname override actual module name
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.

The cited commit added an overriding module modname, taken from the
module loader, which is authoritative.  So it set query.module 1st,
which disallowed its use in the query-string.

But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.

  # enable (dynamic-debug in) drm only
  modprobe drm dyndbg="class DRM_UT_CORE +p"

  # get drm_helper too
  modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"

  # get everything that knows DRM_UT_CORE
  modprobe drm dyndbg="class DRM_UT_CORE module * +p"

  # also for boot-args:
  drm.dyndbg="class DRM_UT_CORE module * +p"

So convert the override into a default, by filling it only when/after
the query-string omitted the module.

NB: the query class FOO handling is forthcoming.

Fixes: 8e59b5cfb9 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
47ea6f99d0 dyndbg: use ESCAPE_SPACE for cat control
`cat control` currently does octal escape, so '\n' becomes "\012".
Change this to display as "\n" instead, which reads much cleaner.

   :#> head -n7 /proc/dynamic_debug/control
   # filename:lineno [module]function flags format
   init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\n"
   init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\n"
   init/main.c:1424 [main]run_init_process =_ "  with arguments:\n"
   init/main.c:1426 [main]run_init_process =_ "    %s\n"
   init/main.c:1427 [main]run_init_process =_ "  with environment:\n"
   init/main.c:1429 [main]run_init_process =_ "    %s\n"

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
773beabbb8 dyndbg: reverse module.callsite walk in cat control
Walk the module's vector of callsites backwards; ie N..0.  This
"corrects" the backwards appearance of a module's prdbg vector when
walked 0..N.  I think this is due to linker mechanics, which I'm
inclined to treat as immutable, and the order is fixable in display.

No functional changes.

Combined with previous commit, which reversed tables-list, we get:

  :#> head -n7 /proc/dynamic_debug/control
  # filename:lineno [module]function flags format
  init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\012"
  init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\012"
  init/main.c:1424 [main]run_init_process =_ "  with arguments:\012"
  init/main.c:1426 [main]run_init_process =_ "    %s\012"
  init/main.c:1427 [main]run_init_process =_ "  with environment:\012"
  init/main.c:1429 [main]run_init_process =_ "    %s\012"

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
2ad556f700 dyndbg: reverse module walk in cat control
/proc/dynamic_debug/control walks the prdbg catalog in "reverse",
fix this by adding new ddebug_tables to tail of list.

This puts init/main.c entries 1st, which looks more than coincidental.

no functional changes.

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
bfa3ca448e dyndbg: show both old and new in change-info
print "old => new" flag values to the info("change") message.

no functional change.

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
85d6b66d31 dyndbg: fix module.dyndbg handling
For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb()
stub-fn is too permissive:

bash-5.1# modprobe drm JUNKdyndbg
bash-5.1# modprobe drm dyndbgJUNK
[   42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds
[   42.937484] ACPI: bus type drm_connector registered

This caused no ill effects, because unknown parameters are either
ignored by default with an "unknown parameter" warning, or ignored
because dyndbg allows its no-effect use on non-dyndbg builds.

But since the code has an explicit feedback message, it should be
issued accurately.  Fix with strcmp for exact param-name match.

Fixes: b48420c1d3 dynamic_debug: make dynamic-debug work for module initialization
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie
ee879be38b dyndbg: fix static_branch manipulation
In https://lore.kernel.org/lkml/20211209150910.GA23668@axis.com/

Vincent's patch commented on, and worked around, a bug toggling
static_branch's, when a 2nd PRINTK-ish flag was added.  The bug
results in a premature static_branch_disable when the 1st of 2 flags
was disabled.

The cited commit computed newflags, but then in the JUMP_LABEL block,
failed to use that result, instead using just one of the terms in it.
Using newflags instead made the code work properly.

This is Vincents test-case, reduced.  It needs the 2nd flag to
demonstrate the bug, but it's explanatory here.

pt_test() {
    echo 5 > /sys/module/dynamic_debug/verbose

    site="module tcp" # just one callsite
    echo " $site =_ " > /proc/dynamic_debug/control # clear it

    # A B ~A ~B
    for flg in +T +p "-T #broke here" -p; do
	echo " $site $flg " > /proc/dynamic_debug/control
    done;

    # A B ~B ~A
    for flg in +T +p "-p #broke here" -T; do
	echo " $site $flg " > /proc/dynamic_debug/control
    done
}
pt_test

Fixes: 84da83a6ff dyndbg: combine flags & mask into a struct, simplify with it
CC: vincent.whitchurch@axis.com
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
David S. Miller
2018b22a75 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-09-06 (i40e, iavf)

This series contains updates to i40e and iavf drivers.

Stanislaw adds support for new device id for i40e.

Jaroslaw tidies up some code around MSI-X configuration by adding/
reworking comments and introducing a couple of macros for i40e.

Michal resolves some races around reset and close by deferring and deleting
some pending AdminQ operations and reworking filter additions and deletions
during these operations for iavf.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:57:48 +01:00
David S. Miller
29796143f7 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-09-06 (ice)

This series contains updates to ice driver only.

Tony reduces device MSI-X request/usage when entire request can't be fulfilled.

Michal adds check for reset when waiting for PTP offsets.

Paul refactors firmware version checks to use a common helper.

Christophe Jaillet changes a couple of local memory allocation to not
use the devm variant.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:56:21 +01:00
Florian Westphal
adda60cc2b netfilter: nat: avoid long-running port range loop
Looping a large port range takes too long. Instead select a random
offset within [ntohs(exp->saved_proto.tcp.port), 65535] and try 128
ports.

This is a rehash of an erlier patch to do the same, but generalized
to handle other helpers as well.

Link: https://patchwork.ozlabs.org/project/netfilter-devel/patch/20210920204439.13179-2-Cole.Dishington@alliedtelesis.co.nz/
Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-07 16:46:04 +02:00
Florian Westphal
c92c271710 netfilter: nat: move repetitive nat port reserve loop to a helper
Almost all nat helpers reserve an expecation port the same way:
Try the port inidcated by the peer, then move to next port if that
port is already in use.

We can squash this into a helper.

Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-07 16:46:04 +02:00
Wolfram Sang
8556bceb9c netfilter: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-07 16:46:03 +02:00
Florian Westphal
a0a4de4d89 netfilter: remove NFPROTO_DECNET
Decnet has been removed. so no need to reserve space in arrays for it.

Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-07 16:46:03 +02:00
Florian Westphal
628d694344 netfilter: conntrack: reduce timeout when receiving out-of-window fin or rst
In case the endpoints and conntrack go out-of-sync, i.e. there is
disagreement wrt. validy of sequence/ack numbers between conntracks
internal state and those of the endpoints, connections can hang for a
long time (until ESTABLISHED timeout).

This adds a check to detect a fin/fin exchange even if those are
invalid.  The timeout is then lowered to UNACKED (default 300s).

Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-07 16:46:03 +02:00
Florian Westphal
09a59001b0 netfilter: conntrack: remove unneeded indent level
After previous patch, the conditional branch is obsolete, reformat it.
gcc generates same code as before this change.

Signed-off-by: Florian Westphal <fw@strlen.de>
2022-09-07 16:46:03 +02:00
Ilpo Järvinen
1d10cd4da5 serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
Tx'ing does not correctly account Tx'ed characters into icount.tx.
Using uart_xmit_advance() fixes the problem.

Fixes: 2d908b38d4 ("serial: Add Tegra Combined UART driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:40:29 +02:00
Ilpo Järvinen
754f68044c serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
DMA complete & stop paths did not correctly account Tx'ed characters
into icount.tx. Using uart_xmit_advance() fixes the problem.

Fixes: e9ea096dd2 ("serial: tegra: add serial driver")
Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance()
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:40:21 +02:00
Ilpo Järvinen
e77cab77f2 serial: Create uart_xmit_advance()
A very common pattern in the drivers is to advance xmit tail
index and do bookkeeping of Tx'ed characters. Create
uart_xmit_advance() to handle it.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:40:16 +02:00
Liu Shixin
53fc01a0a8 net: sysctl: remove unused variable long_max
The variable long_max is replaced by bpf_jit_limit_max and no longer be
used. So remove it.

No functional change.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:31:19 +01:00
William Wu
91062e663b usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core
doesn't support 64-bit DMA address width. In this case, this
driver should use the default 32-bit mask. Otherwise, the DWC3
controller will break if it runs on above 4GB physical memory
environment.

This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which
used for the DMA address width, and only configure 64-bit DMA
mask if the DWC_USB3_AWIDTH is 64.

Fixes: 45d39448b4 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:30:35 +02:00
Lorenzo Bianconi
c9daab3223 net: ethernet: mtk_eth_soc: remove mtk_foe_entry_timestamp
Get rid of mtk_foe_entry_timestamp routine since it is no longer used.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:30:13 +01:00
Lorenzo Bianconi
f27b405ef4 net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine

Fixes: c4f033d9e0 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:29:40 +01:00
Mark Brown
e0d38f88e9
ASoC: Fixes for MT8195 SOF support
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:

This series fixes Sound Open Firmware support for MT8195 by making
sure that the sound card driver is actually able to probe and IPC
can finally happen.
It is now possible to get DSP support for audio.

Tested on MT8195 Tomato - Acer Chromebook Spin 513 CP513-2H (Pipewire).
2022-09-07 15:28:51 +01:00
Menglong Dong
9cb252c4c1 net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
As Eric reported, the 'reason' field is not presented when trace the
kfree_skb event by perf:

$ perf record -e skb:kfree_skb -a sleep 10
$ perf script
  ip_defrag 14605 [021]   221.614303:   skb:kfree_skb:
  skbaddr=0xffff9d2851242700 protocol=34525 location=0xffffffffa39346b1
  reason:

The cause seems to be passing kernel address directly to TP_printk(),
which is not right. As the enum 'skb_drop_reason' is not exported to
user space through TRACE_DEFINE_ENUM(), perf can't get the drop reason
string from the 'reason' field, which is a number.

Therefore, we introduce the macro DEFINE_DROP_REASON(), which is used
to define the trace enum by TRACE_DEFINE_ENUM(). With the help of
DEFINE_DROP_REASON(), now we can remove the auto-generate that we
introduced in the commit ec43908dd5
("net: skb: use auto-generation to convert skb drop reason to string"),
and define the string array 'drop_reasons'.

Hmmmm...now we come back to the situation that have to maintain drop
reasons in both enum skb_drop_reason and DEFINE_DROP_REASON. But they
are both in dropreason.h, which makes it easier.

After this commit, now the format of kfree_skb is like this:

$ cat /tracing/events/skb/kfree_skb/format
name: kfree_skb
ID: 1524
format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:void * skbaddr;   offset:8;       size:8; signed:0;
        field:void * location;  offset:16;      size:8; signed:0;
        field:unsigned short protocol;  offset:24;      size:2; signed:0;
        field:enum skb_drop_reason reason;      offset:28;      size:4; signed:0;

print fmt: "skbaddr=%p protocol=%u location=%p reason: %s", REC->skbaddr, REC->protocol, REC->location, __print_symbolic(REC->reason, { 1, "NOT_SPECIFIED" }, { 2, "NO_SOCKET" } ......

Fixes: ec43908dd5 ("net: skb: use auto-generation to convert skb drop reason to string")
Link: https://lore.kernel.org/netdev/CANn89i+bx0ybvE55iMYf5GJM48WwV1HNpdm9Q6t-HaEstqpCSA@mail.gmail.com/
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:28:08 +01:00
Wesley Cheng
8422b769fa usb: dwc3: gadget: Submit endxfer command if delayed during disconnect
During a cable disconnect sequence, if ep0state is not in the SETUP phase,
then nothing will trigger any pending end transfer commands.  Force
stopping of any pending SETUP transaction, and move back to the SETUP
phase.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-6-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:26:45 +02:00
Wesley Cheng
b353eb6dc2 usb: dwc3: gadget: Skip waiting for CMDACT cleared during endxfer
For endxfer commands that do not require an endpoint complete interrupt,
avoid having to wait for the command active bit to clear.  This allows for
EP0 events to continue to be handled, which allows for the controller to
complete it.  Otherwise, it is known that the endxfer command will fail if
there is a pending SETUP token that needs to be read.

Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-5-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:26:45 +02:00
Wesley Cheng
461ee46750 usb: dwc3: Increase DWC3 controller halt timeout
Since EP0 transactions need to be completed before the controller halt
sequence is finished, this may take some time depending on the host and the
enabled functions.  Increase the controller halt timeout, so that we give
the controller sufficient time to handle EP0 transfers.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-4-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:26:45 +02:00
Wesley Cheng
5265397f94 usb: dwc3: Remove DWC3 locking during gadget suspend/resume
Remove the need for making dwc3_gadget_suspend() and dwc3_gadget_resume()
to be called in a spinlock, as dwc3_gadget_run_stop() could potentially
take some time to complete.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-3-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:26:44 +02:00
Wesley Cheng
2b2da6574e usb: dwc3: Avoid unmapping USB requests if endxfer is not complete
If DWC3_EP_DELAYED_STOP is set during stop active transfers, then do not
continue attempting to unmap request buffers during dwc3_remove_requests().
This can lead to SMMU faults, as the controller has not stopped the
processing of the TRB.  Defer this sequence to the EP0 out start, which
ensures that there are no pending SETUP transactions before issuing the
endxfer.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-2-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:26:26 +02:00
Lorenzo Bianconi
0e80707d94 net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.

Fixes: 33fc42de33 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 15:25:03 +01:00
Linus Walleij
787f51f210 USB/ARM: Switch S3C2410 UDC to GPIO descriptors
This converts the S3C2410 UDC USB device controller to use
GPIO descriptor tables and modern GPIO.

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220901081649.564348-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:23:54 +02:00
Dongliang Mu
a8113da51c usb: misc: uss720: fix uninitialized variable rlen
Smatch reports the following error: uninitialized symbol 'rlen'

drivers/usb/misc/uss720.c:514 parport_uss720_epp_write_data() error
drivers/usb/misc/uss720.c:575 parport_uss720_ecp_write_data() error
drivers/usb/misc/uss720.c:593 parport_uss720_ecp_read_data() error
drivers/usb/misc/uss720.c:626 parport_uss720_write_compat() error

The root cause is, the failure of usb_bulk_msg leads to the
uninitialized variable rlen in printk function.

Fix this by initializing rlen with zero.

Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20220903100004.2874741-1-dzm91@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:23:48 +02:00
Dan Carpenter
f57004b9d9 usb: gadget: f_fs: stricter integer overflow checks
This from static analysis.  The vla_item() takes a size and adds it to
the total.  It has a built in integer overflow check so if it encounters
an integer overflow anywhere then it records the total as SIZE_MAX.

However there is an issue here because the "lang_count*(needed_count+1)"
multiplication can overflow.  Technically the "lang_count + 1" addition
could overflow too, but that would be detected and is harmless.  Fix
both using the new size_add() and size_mul() functions.

Fixes: e6f3862fa1 ("usb: gadget: FunctionFS: Remove VLAIS usage from gadget code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YxDI3lMYomE7WCjn@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:23:22 +02:00
Christophe Leroy
5e0531f6b9
spi: Add capability to perform some transfer with chipselect off
Some components require a few clock cycles with chipselect off before
or/and after the data transfer done with CS on.

Typically IDT 801034 QUAD PCM CODEC datasheet states "Note *: CCLK
should have one cycle before CS goes low, and two cycles after
CS goes high".

The cycles "before" are implicitely provided by all previous activity
on the SPI bus. But the cycles "after" must be provided in order to
terminate the SPI transfer.

In order to use that kind of component, add a cs_off flag to
spi_transfer struct. When this flag is set, the transfer is performed
with chipselect off. This allows consummer to add a dummy transfer
at the end of the transfer list which is performed with chipselect
OFF, providing the required additional clock cycles.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/434165c46f06d802690208a11e7ea2500e8da4c7.1662558898.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-07 15:18:48 +01:00
Vasant Hegde
d799a183da iommu/amd: Add command-line option to enable different page table
Enhance amd_iommu command line option to specify v1 or v2 page table.
By default system will boot in V1 page table mode.

Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 16:12:37 +02:00
Suravee Suthikulpanit
4db6c41f09 iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API
Introduce init function for setting up DMA domain for DMA-API with
the IOMMU v2 page table.

Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-9-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 16:12:37 +02:00
Suravee Suthikulpanit
643feb0072 iommu/amd: Add support for Guest IO protection
AMD IOMMU introduces support for Guest I/O protection where the request
from the I/O device without a PASID are treated as if they have PASID 0.

Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-8-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 16:12:36 +02:00
Vasant Hegde
aaac38f614 iommu/amd: Initial support for AMD IOMMU v2 page table
Introduce IO page table framework support for AMD IOMMU v2 page table.
This patch implements 4 level page table within iommu amd driver and
supports 4K/2M/1G page sizes.

Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-7-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 16:12:35 +02:00
Suravee Suthikulpanit
be1af02b27 iommu/amd: Update sanity check when enable PRI/ATS for IOMMU v1 table
Currently, PPR/ATS can be enabled only if the domain is type
identity mapping. However, when allowing the IOMMU v2 page table
to be used for DMA-API, the check is no longer valid.

Update the sanity check to only apply for when using AMD_IOMMU_V1
page table mode.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-6-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 16:12:34 +02:00
Suravee Suthikulpanit
43312b710b iommu/amd: Refactor amd_iommu_domain_enable_v2 to remove locking
The current function to enable IOMMU v2 also lock the domain.
In order to reuse the same code in different code path, in which
the domain has already been locked, refactor the function to separate
the locking from the enabling logic.

Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220825063939.8360-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 16:12:34 +02:00