Commit graph

1,189,987 commits

Author SHA1 Message Date
Jani Nikula
51b072de8e drm/i915/gmbus: split out gmbus regs in a separate file
Declutter i915_reg.h, and also observe very few places need the gmbus
register defitions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/820807f404e548ab365b934d44f01b306eaa28c2.1661855191.git.jani.nikula@intel.com
2022-08-31 18:07:46 +03:00
Alex Williamson
873aefb376 vfio/type1: Unpin zero pages
There's currently a reference count leak on the zero page.  We increment
the reference via pin_user_pages_remote(), but the page is later handled
as an invalid/reserved page, therefore it's not accounted against the
user and not unpinned by our put_pfn().

Introducing special zero page handling in put_pfn() would resolve the
leak, but without accounting of the zero page, a single user could
still create enough mappings to generate a reference count overflow.

The zero page is always resident, so for our purposes there's no reason
to keep it pinned.  Therefore, add a loop to walk pages returned from
pin_user_pages_remote() and unpin any zero pages.

Cc: stable@vger.kernel.org
Reported-by: Luboslav Pivarc <lpivarc@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/166182871735.3518559.8884121293045337358.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-08-31 08:57:30 -06:00
Christian Brauner
6344e66970
xattr: constify value argument in vfs_setxattr()
Now that we don't perform translations directly in vfs_setxattr()
anymore we can constify the @value argument in vfs_setxattr(). This also
allows us to remove the hack to cast from a const in ovl_do_setxattr().

Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
2022-08-31 16:38:07 +02:00
Christian Brauner
7e1401acd9
ovl: use vfs_set_acl_prepare()
The posix_acl_from_xattr() helper should mainly be used in
i_op->get_acl() handlers. It translates from the uapi struct into the
kernel internal POSIX ACL representation and doesn't care about mount
idmappings.

Use the vfs_set_acl_prepare() helper to generate a kernel internal POSIX
ACL representation in struct posix_acl format taking care to map from
the mount idmapping into the filesystem's idmapping.

The returned struct posix_acl is in the correct format to be cached by
the VFS or passed to the filesystem's i_op->set_acl() method to write to
the backing store.

Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
2022-08-31 16:38:07 +02:00
Christian Brauner
52edb4080e
acl: move idmapping handling into posix_acl_xattr_set()
The uapi POSIX ACL struct passed through the value argument during
setxattr() contains {g,u}id values encoded via ACL_{GROUP,USER} entries
that should actually be stored in the form of k{g,u}id_t (See [1] for a
long explanation of the issue.).

In 0c5fd887d2 ("acl: move idmapped mount fixup into vfs_{g,s}etxattr()")
we took the mount's idmapping into account in order to let overlayfs
handle POSIX ACLs on idmapped layers correctly. The fixup is currently
performed directly in vfs_setxattr() which piles on top of the earlier
hackiness by handling the mount's idmapping and stuff the vfs{g,u}id_t
values into the uapi struct as well. While that is all correct and works
fine it's just ugly.

Now that we have introduced vfs_make_posix_acl() earlier move handling
idmapped mounts out of vfs_setxattr() and into the POSIX ACL handler
where it belongs.

Note that we also need to call vfs_make_posix_acl() for EVM which
interpretes POSIX ACLs during security_inode_setxattr(). Leave them a
longer comment for future reference.

All filesystems that support idmapped mounts via FS_ALLOW_IDMAP use the
standard POSIX ACL xattr handlers and are covered by this change. This
includes overlayfs which simply calls vfs_{g,s}etxattr().

The following filesystems use custom POSIX ACL xattr handlers: 9p, cifs,
ecryptfs, and ntfs3 (and overlayfs but we've covered that in the paragraph
above) and none of them support idmapped mounts yet.

Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org/ [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
2022-08-31 16:37:58 +02:00
Jani Nikula
fe28c7c120 drm/i915: move and group properties under display.properties
Move display property related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14b14f871e322419b10166c1bd8a5a956f5430c8.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:56 +03:00
Jani Nikula
a71e7d77fb drm/i915: move atomic_helper under display sub-struct
Move display atomic helper related members under drm_i915_private
display sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1d864238a92a32d52ea70c0079c910cc90955324.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:54 +03:00
Jani Nikula
6493d4a96f drm/i915: move quirks under display sub-struct
Move display quirk related members under drm_i915_private display
sub-struct.

Prefer adding anonymous sub-structs even for single members that aren't
our own structs.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4a1a5657023efe24a362c67daf79260f179f0eb.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:51 +03:00
Jani Nikula
deb141510f drm/i915/quirks: abstract quirks further by making quirk ids an enum
Turn the quirk ids to enums instead of bits, and hide the masking inside
intel_quirks.c. Define the enums in intel_quirks.h to declutter
i915_drv.h while at it.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/60d8a20e1f8845b0bef53c2e32d524be888e426d.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:47 +03:00
Jani Nikula
0c82118b0a drm/i915/quirks: abstract checking for display quirks
Add intel_has_quirk() for checking if a display quirk is present. Avoid
accessing i915->quirks all over the place.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/74f954ca81a8068033141a15686dffd01ad9b0f9.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:43 +03:00
Jani Nikula
b202ab6173 drm/i915: move and group modeset_wq and flip_wq under display.wq
Move display workqueue related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f34f7fb45510e880ce0cc16cb2fbba72fbe94a1d.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:38 +03:00
Jani Nikula
b7d1559038 drm/i915: move dbuf under display sub-struct
Move display dbuf related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3363a516c12bd8bfb240131e9eb9fc3a0f3057a3.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:34 +03:00
Jani Nikula
5da6d6c792 drm/i915: move fb_tracking under display sub-struct
Move display frontbuffer tracking related members under drm_i915_private
display sub-struct.

Rename struct i915_frontbuffer_tracking to intel_frontbuffer_tracking
while at it.

FIXME: fb_tracking.lock mutex init should be moved away from
i915_gem_init_early().

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5444d0a373afca46da9a2f6e4db442af21b429b.1661779055.git.jani.nikula@intel.com
2022-08-31 17:21:29 +03:00
Khalid Masum
ec1bd37123 fscache: fix misdocumented parameter
This patch fixes two warnings generated by make docs. The functions
fscache_use_cookie and fscache_unuse_cookie, both have a parameter
named cookie. But they are documented with the name "object" with
unclear description. Which generates the warning when creating docs.

This commit will replace the currently misdocumented parameter names
with the correct ones while adding proper descriptions.

CC: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220521142446.4746-1-khalid.masum.92@gmail.com/ # v1
Link: https://lore.kernel.org/r/20220818040738.12036-1-khalid.masum.92@gmail.com/ # v2
Link: https://lore.kernel.org/r/880d7d25753fb326ee17ac08005952112fcf9bdb.1657360984.git.mchehab@kernel.org/ # Mauro's version
2022-08-31 14:57:28 +01:00
Johan Hovold
41ca302a69 USB: serial: ch341: fix disabled rx timer on older devices
At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.

Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e0 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31 15:51:06 +02:00
Johan Hovold
8e83622ae7 USB: serial: ch341: fix lost character on LCR updates
Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these
devices either.

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e0 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b598 ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: stable@vger.kernel.org      # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31 15:50:53 +02:00
Zhen Lei
370d51c842 ARM: 9232/1: Replace this_cpu_* with raw_cpu_* in handle_bad_stack()
The hardware automatically disable the IRQ interrupt before jumping to the
interrupt or exception vector. Therefore, the preempt_disable() operation
in this_cpu_read() after macro expansion is unnecessary. In fact, function
this_cpu_read() may trigger scheduling, see pseudocode below.

Pseudocode of this_cpu_read(xx):
preempt_disable_notrace();
raw_cpu_read(xx);
if (unlikely(__preempt_count_dec_and_test()))
	__preempt_schedule_notrace();

Therefore, use raw_cpu_* instead of this_cpu_* to eliminate potential
hazards. At the very least, it reduces a few lines of assembly code.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-08-31 14:50:08 +01:00
Wang Kefeng
edd61fc1ca ARM: 9228/1: vfp: kill vfp_flush/release_thread()
Those functions are removed since 2006 commit d6551e884c
("[ARM] Add thread_notify infrastructure").

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-08-31 14:50:08 +01:00
Ben Wolsieffer
3d47ff2568 ARM: 9226/1: disable FDPIC ABI
When building with an arm-*-uclinuxfdpiceabi toolchain, the FDPIC ABI is
enabled by default but should not be used to build the kernel.
Therefore, pass -mno-fdpic if supported by the compiler.

Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-08-31 14:50:07 +01:00
Francesco Dolcini
87c2a29a6b pinctrl: imx8m: kconfig: Depends on SOC_IMX8M
Change PINCTRL_IMX8M* dependency from just ARCH_MXC to SOC_IMX8M,
likewise is done for other PINCTRL_IMX* kconfig. This avoid polluting
the config when SOC_IMX8M is not enabled.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220830142727.313080-1-francesco.dolcini@toradex.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-31 15:41:21 +02:00
Basavaraj Natikar
3160b37e5c pinctrl: amd: change dev_warn to dev_dbg for additional feature support
Use dev_dbg instead of dev_warn for additional support of pinmux
feature.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220830110525.1933198-1-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-31 15:38:26 +02:00
Nishanth Menon
b736565829 dt-bindings: arm: ti: k3: Sort the SoC definitions alphabetically
Use alphabetical sort to organize the SoCs

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220830160507.7726-3-nm@ti.com
2022-08-31 19:00:45 +05:30
Nishanth Menon
5f120a4dc7 dt-bindings: arm: ti: k3: Sort the am654 board enums
Use alphabetical sort to organize the am654 board names.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220830160507.7726-2-nm@ti.com
2022-08-31 19:00:19 +05:30
David S. Miller
6edd302a1c Merge branch 'hns3-next'
Guangbin Huang says:

====================
net: hns3: updates for -next

This series includes some updates for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:10:50 +01:00
Guangbin Huang
08aa17a0c1 net: hns3: net: hns3: add querying and setting fec off mode from firmware
For some new devices, the FEC mode can not be set to OFF in speed 200G.
In order to flexibly adapt to all types of devices, driver queries
fec ability from firmware to decide whether OFF mode can be supported.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:10:49 +01:00
Hao Lan
5c4f72842d net: hns3: add querying and setting fec llrs mode from firmware
This patch supports llrs fec mode in speed 200G for some new devices, and
suppoprts querying llrs fec ability from firmware.

Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:10:49 +01:00
Guangbin Huang
eaf83ae59e net: hns3: add querying fec ability from firmware
For some new devices, driver can queries fec ability from firmware to
decide which FEC mode can be supported.

If devices of old version which not support querying fec ability, driver
sets fixed ability according to current speed.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:10:49 +01:00
Guangbin Huang
507e46ae26 net: hns3: add getting capabilities of gro offload and fd from firmware
As some new devices may not support GRO offload and flow table director,
to support these devices, driver needs to querying capabilities of GRO
offload and flow table director from firmware. Whether the driver
supports these two features depends on capabilities.

For old device of version HNAE3_DEVICE_VERSION_V2, driver sets their
capabilities of these two features to fixed value.

Setting default features of netdev and debugfs also need to identify
whether support these two features.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:10:49 +01:00
Christophe JAILLET
385ba16dbf soc: mediatek: pm-domains: Simplify some error message
dev_err_probe() already prints the error code in a human readable way, so
there is no need to duplicate it as a numerical value at the end of the
message.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e6ba80d8e27fdb2b1527c7eae6687e481960c81d.1659735996.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-08-31 15:07:56 +02:00
Christophe Leroy
814816d71e powerpc: Fix hard_irq_disable() with sanitizer
As reported by Zhouyi Zhou, WRITE_ONCE() is not atomic
as expected when KASAN or KCSAN are compiled in.

Fix it by re-implementing it using inline assembly.

Fixes: 077fc62b2b ("powerpc/irq: remove inline assembly in hard_irq_disable macro")
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a8298991b3df049a54ee8e558838e34265812014.1661272586.git.christophe.leroy@csgroup.eu
2022-08-31 23:05:27 +10:00
David S. Miller
39a7d7261a Merge branch 'thunderbolt-end-to-end-flow-control'
Mika Westerberg says:

====================
thunderbolt: net: Enable full end-to-end flow control

Thunderbolt/USB4 host controllers support full end-to-end flow control
that prevents dropping packets if there are not enough hardware receive
buffers. So far it has not been enabled for the networking driver yet
but this series changes that. There is one snag though: the second
generation (Intel Falcon Ridge) had a bug that needs special quirk to
get it working. We had that in the early stages of the Thunderbolt/USB4
driver but it got dropped because it was not needed at the time. Now we
add it back as a quirk for the host controller (NHI).

The first patch of this series is a bugfix that I'm planning to push for
v6.0-rc. Rest are v6.1 material. This also includes a patch that shows
the XDomain link type in sysfs the same way we do for USB4 routers and
updates the networking driver module description.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:05:12 +01:00
Mika Westerberg
e550ed4b87 net: thunderbolt: Update module description with mention of USB4
It is Thunderbolt/USB4 now so reflect that in the module description too
to avoid any confusion. No functional changes.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:05:12 +01:00
Mika Westerberg
8bdc25cf62 net: thunderbolt: Enable full end-to-end flow control
USB4NET protocol allows the networking drivers to take advantage of
end-to-end flow control supported by the USB4 host interface. This
should prevent the receiving side from dropping network packets.

In adddition add a module parameter that can be used to turn this off
just in case it causes problems.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:05:12 +01:00
Mika Westerberg
54669e2f17 thunderbolt: Add back Intel Falcon Ridge end-to-end flow control workaround
As we are now enabling full end-to-end flow control to the Thunderbolt
networking driver, in order for it to work properly on second generation
Thunderbolt hardware (Falcon Ridge), we need to add back the workaround
that was removed with commit 53f13319d1 ("thunderbolt: Get rid of E2E
workaround"). However, this time we only apply it for Falcon Ridge
controllers as a form of an additional quirk. For non-Falcon Ridge this
does nothing.

While there fix a typo 'reqister' -> 'register' in the comment.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:05:12 +01:00
Mika Westerberg
f9cad07b84 thunderbolt: Show link type for XDomain connections too
Following what we do for routers already, extend this to XDomain
connections as well. This will show in sysfs whether the link is in USB4
or Thunderbolt mode.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:05:12 +01:00
Mika Westerberg
ff7cd07f30 net: thunderbolt: Enable DMA paths only after rings are enabled
If the other host starts sending packets early on it is possible that we
are still in the middle of populating the initial Rx ring packets to the
ring. This causes the tbnet_poll() to mess over the queue and causes
list corruption. This happens specifically when connected with macOS as
it seems start sending various IP discovery packets as soon as its side
of the paths are configured.

To prevent this we move the DMA path enabling to happen after we have
primed the Rx ring. This makes sure no incoming packets can arrive
before we are ready to handle them.

Fixes: e69b6c02b4 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:05:11 +01:00
Duoming Zhou
c0955bf957 ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler
The function neigh_timer_handler() is a timer handler that runs in an
atomic context. When used by rocker, neigh_timer_handler() calls
"kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in
atomic context bug will happen. One of the processes is shown below:

ofdpa_fib4_add()
 ...
 neigh_add_timer()

(wait a timer)

neigh_timer_handler()
 neigh_release()
  neigh_destroy()
   rocker_port_neigh_destroy()
    rocker_world_port_neigh_destroy()
     ofdpa_port_neigh_destroy()
      ofdpa_port_ipv4_neigh()
       kzalloc(sizeof(.., GFP_KERNEL) //may sleep

This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.

Fixes: 00fc0c51e3 ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31 14:01:29 +01:00
Mark Brown
447d63a2cd
ASoC: codecs: minor cppcheck cleanups
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Small number of cleanups that were either missed in previous versions
or detected by new cppcheck version.
2022-08-31 13:51:56 +01:00
Johan Hovold
ceb4038472 USB: serial: cp210x: add Decagon UCA device id
Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31 14:47:58 +02:00
Mark Brown
ce963f84a8
ASoC: SOF: compress: Add support for timestamp on capture
Merge series from Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>:

The purpose of this patch series is to add support for
timestamping on capture direction using the compress
API.

This is simply done by splitting sof_compr_copy into 2
functions: sof_compr_copy_playback and sof_compr_copy_capture.
Each of these functions handles one of the possible directions:
capture or playback and is called in sof_compr_copy based on
the stream's direction.

The only difference between sof_compr_copy_playback and
sof_compr_copy_capture is the fact that on playback case
we need to copy data from user space and on capture we
need to copy data to user space.
2022-08-31 13:40:16 +01:00
Conor Dooley
f799206943 dt-bindings: gpio: mpfs-gpio: allow parsing of hog child nodes.
The SD card and eMMC on PolarFire SoC are sometimes muxed using a GPIO
by the bootloader. Add a hog child property to facilitate this.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-08-31 14:39:41 +02:00
Jeffy Chen
b98dbd82ee gpio/rockchip: Convert to generic_handle_domain_irq()
Follow commit dbd1c54fc8 ("gpio: Bulk conversion to
generic_handle_domain_irq()").

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-08-31 14:37:34 +02:00
Ian Rogers
3f5df3ac64 perf metric: Return early if no CPU PMU table exists
Previous behavior is to segfault if there is no CPU PMU table and a
metric is sought. To reproduce compile with NO_JEVENTS=1 then request a
metric, for example, "perf stat -M IPC true".

Committer testing:

Before:

  $ make -k NO_JEVENTS=1 BUILD_BPF_SKEL=1 O=/tmp/build/perf-urgent -C tools/perf install-bin
  $ perf stat -M IPC true
  Segmentation fault (core dumped)
  $

After:

  $ perf stat -M IPC true

   Usage: perf stat [<options>] [<command>]

      -M, --metrics <metric/metric group list>
                            monitor specified metrics or metric groups (separated by ,)
  $

Fixes: 00facc7609 ("perf jevents: Switch build to use jevents.py")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <rogers.email@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220830164846.401143-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-31 09:28:31 -03:00
Jani Nikula
20478b8807 drm/i915: move and group fdi members under display.fdi
Move display fdi related members under drm_i915_private display
sub-struct.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b66fe7cf2c6f9e5b7bbfcaff40400492ac706721.1661779055.git.jani.nikula@intel.com
2022-08-31 15:20:07 +03:00
Jani Nikula
e3e8148f43 drm/i915: move and group power related members under display.power
Move display power related members under drm_i915_private display
sub-struct.

Arguably chv_phy_control and chv_phy_assert could be placed in a phy
substruct, but they are only used in the power code.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/57bfa82f6fe85a775f80c398b2a7dff77b9452b0.1661779055.git.jani.nikula@intel.com
2022-08-31 15:19:58 +03:00
Jani Nikula
80b3842f21 drm/i915: move fbc to display.fbc
Move display FBC related members under drm_i915_private display
sub-struct.

Pointers and arrays of pointers to structs that we defined are fine
without a sub-struct wrapping.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1151469ec13d392df86b72a375f490fd70a3257a.1661779055.git.jani.nikula@intel.com
2022-08-31 15:19:51 +03:00
Jani Nikula
a434689c0a drm/i915: move vbt to display.vbt
Move display VBT related members under drm_i915_private display
sub-struct.

v2: Rebase

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/db4b648b201ea0b79654fec2028120999a735db0.1661779055.git.jani.nikula@intel.com
2022-08-31 15:19:39 +03:00
Jani Nikula
90b87cf243 drm/i915: move mipi_mmio_base to display.dsi
Move display DSI related members under drm_i915_private display
sub-struct.

Prefer adding anonymous sub-structs even for single members that aren't
our own structs.

Abstract mmio base member access in register definitions in a macro.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dc7c5a871fe558a809ea943eca5c71dfff1740a8.1661779055.git.jani.nikula@intel.com
2022-08-31 15:19:33 +03:00
Fernanda Ma'rouf
43cf168fa9 selftests/nolibc: Avoid generated files being committed
After running the nolibc tests, the "git status" is not clean because
the generated files are not ignored. Create a `.gitignore` inside the
selftests/nolibc directory to ignore them.

Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Cc: Fernanda Ma'rouf <fernandafmr2@gmail.com>
Signed-off-by: Fernanda Ma'rouf <fernandafmr12@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:17:45 -07:00
Willy Tarreau
ffc297fe22 selftests/nolibc: add a "help" target
It presents the supported targets, and becomes the default target to
save the user from having to read the makefile. The "all" target was
placed after it and now points to "run" to do everything since it's
no longer the default one.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-08-31 05:17:45 -07:00