i.MX LPI2C has dma capability, so add dmas property
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
i.MX LPI2C actually requires dual clock: per clock and ipg clock, so add
both.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When user undefined instruction debug is enabled pc value is hashed like
kernel pointers for security reason. But the security benefit of this
hash is very limited because the code goes on to call __show_regs() that
prints the plain pointer value. pc is a user pointer anyway, so the
kernel does not leak anything. The only result is confusion about the
difference between the pc value on the first printed line, and the value
that __show_regs() prints.
Always print the plain value of pc.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The issue is the same to commit c2999f7fb0 ("net: sched: multiq: don't
call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while
holding sch tree spinlock, which results sleeping-while-atomic BUG.
Fixes: c266f64dbf ("net: sched: protect block state with mutex")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simon Horman says:
====================
nfp: port speed and eeprom get/set updates
this short series is the initial updates for the NFP driver for the v6.1
Kernel. It covers two enhancements:
1. Patches 1/3 and 2/3:
- Support cases where application firmware does not know port speeds
a priori by relaying this information from the management firmware
to the application firmware.
This allows the existing mechanism, whereby the driver reports port
speeds to user-space as provided by the application firmware, to work
in this case.
2. Patch 2/3:
- Add support for eeprom get and set command
====================
Link: https://lore.kernel.org/r/20220825141223.22346-1-simon.horman@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for eeprom get and set operation with ethtool command.
with this change, we can support commands as:
#ethtool -e enp101s0np0 offset 0 length 6
Offset Values
------ ------
0x0000: 00 15 4d 16 66 33
#ethtool -E enp101s0np0 magic 0x400019ee offset 5 length 1 value 0x88
We make this change to persist MAC change during driver reload and system
reboot.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A new tlv type is introduced to indicate if application firmware is
indifferent to port speed, and inform management firmware of the
result.
And the result is always true for flower application firmware since
it's indifferent to port speed from the start and will never change.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In future releases the NIC application firmware may be indifferent to port
speeds - not built for specific port speeds - and consequently it will not
be able to report VF port speeds to the driver without first learning them.
With this change, the driver will pass the speed of physical ports from
management firmware to application firmware, and the latter will copy the
speed of port 0 to all the active VFs. So that the driver can get VF port
speed as before.
The port speed of a VF may be requested from userspace using:
ethtool <vf-intf>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some options like CONFIG_DEBUG_UNCOMPRESS and CONFIG_CMDLINE_FORCE are
fundamentally incompatible with portable kernels but are currently allowed
in all configurations. Other options like XIP_KERNEL are essentially
useless after the completion of the multiplatform conversion.
Repurpose the existing CONFIG_ARCH_MULTIPLATFORM option to decide
whether the resulting kernel image is meant to be portable or not,
and using this to guard all of the known incompatible options.
This is similar to how the RISC-V kernel handles the CONFIG_NONPORTABLE
option (with the opposite polarity).
A few references to CONFIG_ARCH_MULTIPLATFORM were left behind by
earlier clanups and have to be removed now up.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_XIP_KERNEL does not work with any option that involves patching
the read-only kernel .text.
Since at least CONFIG_SMP_ON_UP is required in certain configurations,
flip the dependency to always allow the .text patching options but make
XIP_KERNEL have the dependency instead.
This is a prerequisite for allowing CONFIG_ARCH_MULTIPLATFORM to
be disabled.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move the device and service_id match code at the top of
cm_insert_listen() and cm_find_listen() into the final else branch.
Link: https://lore.kernel.org/r/20220819090859.957943-4-markzhang@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The service_mask is always ~cpu_to_be64(0), so the result is always
a NOP when it is &'d with a service_id. Remove it for simplicity.
Link: https://lore.kernel.org/r/20220819090859.957943-3-markzhang@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since process_{read,write} already prints direction info if ctx->ops.rdma_ev
fails, no need to pass 'dir'.
Link: https://lore.kernel.org/r/20220826081117.21687-1-guoqing.jiang@linux.dev
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
With 'unevaluatedProperties' support implemented, there's a number of
warnings when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dtb: spi@e6e90000: Unevaluated properties are not allowed ('power-domains', 'resets' were unexpected)
From schema: Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
The main problem is that SoC DTSI's include power-domains and resets
property, whereas the renesas,sh-msiof.yaml has 'unevaluatedProperties:
false'. So just add optional power-domains and resets properties.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220829220334.6379-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can still see that a majority of the time is spent hashing task pointers:
...
16.98% [kernel] [k] rhashtable_jhash2
...
Doing the bookkeeping in toggle_bp_slots() is currently O(#cpus),
calling task_bp_pinned() for each CPU, even if task_bp_pinned() is
CPU-independent. The reason for this is to update the per-CPU
'tsk_pinned' histogram.
To optimize the CPU-independent case to O(1), keep a separate
CPU-independent 'tsk_pinned_all' histogram.
The major source of complexity are transitions between "all
CPU-independent task breakpoints" and "mixed CPU-independent and
CPU-dependent task breakpoints". The code comments list all cases that
require handling.
After this optimization:
| $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 100 threads with 4 breakpoints and 128 parallelism
| Total time: 1.758 [sec]
|
| 34.336621 usecs/op
| 4395.087500 usecs/op/cpu
38.08% [kernel] [k] queued_spin_lock_slowpath
10.81% [kernel] [k] smp_cfm_core_cond
3.01% [kernel] [k] update_sg_lb_stats
2.58% [kernel] [k] osq_lock
2.57% [kernel] [k] llist_reverse_order
1.45% [kernel] [k] find_next_bit
1.21% [kernel] [k] flush_tlb_func_common
1.01% [kernel] [k] arch_install_hw_breakpoint
Showing that the time spent hashing keys has become insignificant.
With the given benchmark parameters, that's an improvement of 12%
compared with the old O(#cpus) version.
And finally, using the less aggressive parameters from the preceding
changes, we now observe:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.067 [sec]
|
| 35.292187 usecs/op
| 2258.700000 usecs/op/cpu
Which is an improvement of 12% compared to without the histogram
optimizations (baseline is 40 usecs/op). This is now on par with the
theoretical ideal (constraints disabled), and only 12% slower than no
breakpoints at all.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-15-elver@google.com
Running the perf benchmark with (note: more aggressive parameters vs.
preceding changes, but same 256 CPUs host):
| $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 100 threads with 4 breakpoints and 128 parallelism
| Total time: 1.989 [sec]
|
| 38.854160 usecs/op
| 4973.332500 usecs/op/cpu
20.43% [kernel] [k] queued_spin_lock_slowpath
18.75% [kernel] [k] osq_lock
16.98% [kernel] [k] rhashtable_jhash2
8.34% [kernel] [k] task_bp_pinned
4.23% [kernel] [k] smp_cfm_core_cond
3.65% [kernel] [k] bcmp
2.83% [kernel] [k] toggle_bp_slot
1.87% [kernel] [k] find_next_bit
1.49% [kernel] [k] __reserve_bp_slot
We can see that a majority of the time is now spent hashing task
pointers to index into task_bps_ht in task_bp_pinned().
Obtaining the max_bp_pinned_slots() for CPU-independent task targets
currently is O(#cpus), and calls task_bp_pinned() for each CPU, even if
the result of task_bp_pinned() is CPU-independent.
The loop in max_bp_pinned_slots() wants to compute the maximum slots
across all CPUs. If task_bp_pinned() is CPU-independent, we can do so by
obtaining the max slots across all CPUs and adding task_bp_pinned().
To do so in O(1), use a bp_slots_histogram for CPU-pinned slots.
After this optimization:
| $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 100 threads with 4 breakpoints and 128 parallelism
| Total time: 1.930 [sec]
|
| 37.697832 usecs/op
| 4825.322500 usecs/op/cpu
19.13% [kernel] [k] queued_spin_lock_slowpath
18.21% [kernel] [k] rhashtable_jhash2
15.46% [kernel] [k] osq_lock
6.27% [kernel] [k] toggle_bp_slot
5.91% [kernel] [k] task_bp_pinned
5.05% [kernel] [k] smp_cfm_core_cond
1.78% [kernel] [k] update_sg_lb_stats
1.36% [kernel] [k] llist_reverse_order
1.34% [kernel] [k] find_next_bit
1.19% [kernel] [k] bcmp
Suggesting that time spent in task_bp_pinned() has been reduced.
However, we're still hashing too much, which will be addressed in the
subsequent change.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-14-elver@google.com
Factor out the existing `atomic_t count[N]` into its own struct called
'bp_slots_histogram', to generalize and make its intent clearer in
preparation of reusing elsewhere. The basic idea of bucketing "total
uses of N slots" resembles a histogram, so calling it such seems most
intuitive.
No functional change.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-13-elver@google.com
While optimizing task_bp_pinned()'s runtime complexity to O(1) on
average helps reduce time spent in the critical section, we still suffer
due to serializing everything via 'nr_bp_mutex'. Indeed, a profile shows
that now contention is the biggest issue:
95.93% [kernel] [k] osq_lock
0.70% [kernel] [k] mutex_spin_on_owner
0.22% [kernel] [k] smp_cfm_core_cond
0.18% [kernel] [k] task_bp_pinned
0.18% [kernel] [k] rhashtable_jhash2
0.15% [kernel] [k] queued_spin_lock_slowpath
when running the breakpoint benchmark with (system with 256 CPUs):
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.207 [sec]
|
| 108.267188 usecs/op
| 6929.100000 usecs/op/cpu
The main concern for synchronizing the breakpoint constraints data is
that a consistent snapshot of the per-CPU and per-task data is observed.
The access pattern is as follows:
1. If the target is a task: the task's pinned breakpoints are counted,
checked for space, and then appended to; only bp_cpuinfo::cpu_pinned
is used to check for conflicts with CPU-only breakpoints;
bp_cpuinfo::tsk_pinned are incremented/decremented, but otherwise
unused.
2. If the target is a CPU: bp_cpuinfo::cpu_pinned are counted, along
with bp_cpuinfo::tsk_pinned; after a successful check, cpu_pinned is
incremented. No per-task breakpoints are checked.
Since rhltable safely synchronizes insertions/deletions, we can allow
concurrency as follows:
1. If the target is a task: independent tasks may update and check the
constraints concurrently, but same-task target calls need to be
serialized; since bp_cpuinfo::tsk_pinned is only updated, but not
checked, these modifications can happen concurrently by switching
tsk_pinned to atomic_t.
2. If the target is a CPU: access to the per-CPU constraints needs to
be serialized with other CPU-target and task-target callers (to
stabilize the bp_cpuinfo::tsk_pinned snapshot).
We can allow the above concurrency by introducing a per-CPU constraints
data reader-writer lock (bp_cpuinfo_sem), and per-task mutexes (reuses
task_struct::perf_event_mutex):
1. If the target is a task: acquires perf_event_mutex, and acquires
bp_cpuinfo_sem as a reader. The choice of percpu-rwsem minimizes
contention in the presence of many read-lock but few write-lock
acquisitions: we assume many orders of magnitude more task target
breakpoints creations/destructions than CPU target breakpoints.
2. If the target is a CPU: acquires bp_cpuinfo_sem as a writer.
With these changes, contention with thousands of tasks is reduced to the
point where waiting on locking no longer dominates the profile:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.077 [sec]
|
| 40.201563 usecs/op
| 2572.900000 usecs/op/cpu
21.54% [kernel] [k] task_bp_pinned
20.18% [kernel] [k] rhashtable_jhash2
6.81% [kernel] [k] toggle_bp_slot
5.47% [kernel] [k] queued_spin_lock_slowpath
3.75% [kernel] [k] smp_cfm_core_cond
3.48% [kernel] [k] bcmp
On this particular setup that's a speedup of 2.7x.
We're also getting closer to the theoretical ideal performance through
optimizations in hw_breakpoint.c -- constraints accounting disabled:
| perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.067 [sec]
|
| 35.286458 usecs/op
| 2258.333333 usecs/op/cpu
Which means the current implementation is ~12% slower than the
theoretical ideal.
For reference, performance without any breakpoints:
| $> bench -r 30 breakpoint thread -b 0 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 0 breakpoints and 64 parallelism
| Total time: 0.060 [sec]
|
| 31.365625 usecs/op
| 2007.400000 usecs/op/cpu
On a system with 256 CPUs, the theoretical ideal is only ~12% slower
than no breakpoints at all; the current implementation is ~28% slower.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-12-elver@google.com
Internal data structures (cpu_bps, task_bps) of powerpc's hw_breakpoint
implementation have relied on nr_bp_mutex serializing access to them.
Before overhauling synchronization of kernel/events/hw_breakpoint.c,
introduce 2 spinlocks to synchronize cpu_bps and task_bps respectively,
thus avoiding reliance on callers synchronizing powerpc's hw_breakpoint.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-10-elver@google.com
Commit a92438c5a3 ("soc: mediatek: mtk-svs: Use bitfield access macros
where possible") introduced the use of FIELD_GET and FIELD_PREP macros,
which are defined in the bitfield header. Add an explicit include for it
so we're sure to have the symbols defined independently of the config.
Fixes: a92438c5a3 ("soc: mediatek: mtk-svs: Use bitfield access macros where possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220829204439.3748648-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Flexible breakpoints have never been implemented, with
bp_cpuinfo::flexible always being 0. Unfortunately, they still occupy 4
bytes in each bp_cpuinfo and bp_busy_slots, as well as computing the max
flexible count in fetch_bp_busy_slots().
This again causes suboptimal code generation, when we always know that
`!!slots.flexible` will be 0.
Just get rid of the flexible "placeholder" and remove all real code
related to it. Make a note in the comment related to the constraints
algorithm but don't remove them from the algorithm, so that if in future
flexible breakpoints need supporting, it should be trivial to revive
them (along with reverting this change).
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-9-elver@google.com
Due to being a __weak function, hw_breakpoint_weight() will cause the
compiler to always emit a call to it. This generates unnecessarily bad
code (register spills etc.) for no good reason; in fact it appears in
profiles of `perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512`:
...
0.70% [kernel] [k] hw_breakpoint_weight
...
While a small percentage, no architecture defines its own
hw_breakpoint_weight() nor are there users outside hw_breakpoint.c,
which makes the fact it is currently __weak a poor choice.
Change hw_breakpoint_weight()'s definition to follow a similar protocol
to hw_breakpoint_slots(), such that if <asm/hw_breakpoint.h> defines
hw_breakpoint_weight(), we'll use it instead.
The result is that it is inlined and no longer shows up in profiles.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-8-elver@google.com
Optimize internal hw_breakpoint state if the architecture's number of
breakpoint slots is constant. This avoids several kmalloc() calls and
potentially unnecessary failures if the allocations fail, as well as
subtly improves code generation and cache locality.
The protocol is that if an architecture defines hw_breakpoint_slots via
the preprocessor, it must be constant and the same for all types.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-7-elver@google.com
Mark read-only data after initialization as __ro_after_init.
While we are here, turn 'constraints_initialized' into a bool.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-6-elver@google.com
On a machine with 256 CPUs, running the recently added perf breakpoint
benchmark results in:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 236.418 [sec]
|
| 123134.794271 usecs/op
| 7880626.833333 usecs/op/cpu
The benchmark tests inherited breakpoint perf events across many
threads.
Looking at a perf profile, we can see that the majority of the time is
spent in various hw_breakpoint.c functions, which execute within the
'nr_bp_mutex' critical sections which then results in contention on that
mutex as well:
37.27% [kernel] [k] osq_lock
34.92% [kernel] [k] mutex_spin_on_owner
12.15% [kernel] [k] toggle_bp_slot
11.90% [kernel] [k] __reserve_bp_slot
The culprit here is task_bp_pinned(), which has a runtime complexity of
O(#tasks) due to storing all task breakpoints in the same list and
iterating through that list looking for a matching task. Clearly, this
does not scale to thousands of tasks.
Instead, make use of the "rhashtable" variant "rhltable" which stores
multiple items with the same key in a list. This results in average
runtime complexity of O(1) for task_bp_pinned().
With the optimization, the benchmark shows:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.208 [sec]
|
| 108.422396 usecs/op
| 6939.033333 usecs/op/cpu
On this particular setup that's a speedup of ~1135x.
While one option would be to make task_struct a breakpoint list node,
this would only further bloat task_struct for infrequently used data.
Furthermore, after all optimizations in this series, there's no evidence
it would result in better performance: later optimizations make the time
spent looking up entries in the hash table negligible (we'll reach the
theoretical ideal performance i.e. no constraints).
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-5-elver@google.com
Clean up headers:
- Remove unused <linux/kallsyms.h>
- Remove unused <linux/kprobes.h>
- Remove unused <linux/module.h>
- Remove unused <linux/smp.h>
- Add <linux/export.h> for EXPORT_SYMBOL_GPL().
- Add <linux/mutex.h> for mutex.
- Sort alphabetically.
- Move <linux/hw_breakpoint.h> to top to test it compiles on its own.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-4-elver@google.com
Provide hw_breakpoint_is_used() to check if breakpoints are in use on
the system.
Use it in the KUnit test to verify the global state before and after a
test case.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-3-elver@google.com
Add KUnit test for hw_breakpoint constraints accounting, with various
interesting mixes of breakpoint targets (some care was taken to catch
interesting corner cases via bug-injection).
The test cannot be built as a module because it requires access to
hw_breakpoint_slots(), which is not inlinable or exported on all
architectures.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-2-elver@google.com
The MediaTek xHCI dt-binding expects a specific order for the clocks,
but the mt8192 and mt8195 devicetrees were skipping some of the middle
clocks. These clocks are wired to the controller hardware but aren't
controllable.
Add the missing clocks as handles to fixed clocks, so that the clock
order is respected and the dtbs_check warnings are gone.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220708194314.56922-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Send DP_SET_POWER_D3 command to the downstream before stopping DP, so the
suspend process will not be interrupted by the HPD interrupt. Also modify
the order in .atomic_enable callback to make the callbacks symmetric.
Fixes: 46ca7da7f1 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830045756.1655954-1-treapking@chromium.org
When removing the module we will get the following warning:
[ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[ 31.921825] Call Trace:
[ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[ 31.923139] i2c_device_remove+0x181/0x1f0
The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.
Fix this by checking whether both the bridges are probed.
Fixes: 11632d4aa2 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
Add a helper for getting the DP PHY name. In the interest of caller
simplicity and to avoid allocations and passing in of buffers, duplicate
the const strings to return. It's a minor penalty to pay for simplicity
in all the call sites.
v2: Rebase, add kernel-doc, ensure non-NULL always
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b08dc12a7e621a48ec35546d6cd1ed4b1434810d.1660553850.git.jani.nikula@intel.com
The SC8280XP platform has two instances of the 5nm USB3 UNI phy attached
to the multi-port USB controller, add definition for these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220810042303.3583194-4-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The swing and pre-emphasis tables differ between different PHY versions,
or perhaps between different platforms. In particular in order to
introduce SC8280XP these tables needs to be replaced.
Make it possible to specify these tables per PHY config.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220810042303.3583194-3-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SC8280XP platform has a pair of 5nm USB3 UNI phys and a pair of
5nm USB4/3/DP combo PHYs, add a compatible for these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220810042303.3583194-2-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Define configuration to be used by combo USB3 + DisplayPort phy on
SDM845 SoC family. It closely follows sc7180, however like the main USB3
phy it uses the qmp_v3_usb3phy_cfg config.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220810030926.2794179-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Below error is detected from dtbs_check. exynos7-ufs-phy is required
symbol clocks otherwise only PLL ref clock is required.
clock-names: ['ref_clk'] is too short
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220725000249.30509-1-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>