Implemented a new intersect and compatible callback functions
to ttm range manager fetching start offset from drm mm range
allocator.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-2-Arunpravin.PaneerSelvam@amd.com
We are adding two new callbacks to ttm resource manager
function to handle intersection and compatibility of
placement and resources.
v2: move the amdgpu and ttm_range_manager changes to
separate patches (Christian)
v3: rename "intersect" to "intersects" (Matthew)
v4: move !place check to the !res if and return false
in ttm_resource_compatible() function (Christian)
v5: move bits of code from patch number 6 to avoid
temporary driver breakup (Christian)
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-1-Arunpravin.PaneerSelvam@amd.com
Hayes Wang says:
====================
r8152: fix flow control settings
These patches fix the settings of RX FIFO about flow control.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX FIFO would be changed when suspending, so the related settings
have to be modified, too. Otherwise, the flow control would work
abnormally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Fixes: cdf0b86b25 ("r8152: fix a WOL issue")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes.
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3b3fd068c5 added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.
It thus prevents *all* rose connect.
The reason is that a special rose_neigh loopback has a NULL device.
/proc/net/rose_neigh illustrates it via rose_neigh_show() function :
[...]
seq_printf(seq, "%05d %-9s %-4s %3d %3d %3s %3s %3lu %3lu",
rose_neigh->number,
(rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign),
rose_neigh->dev ? rose_neigh->dev->name : "???",
rose_neigh->count,
/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:
addr callsign dev count use mode restart t0 tf digipeaters
00001 RSLOOP-0 ??? 1 2 DCE yes 0 0
By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.
Verification with rose client application FPAC:
FPAC-Node v 4.1.3 (built Aug 5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port Callsign Callsign AX.25 state ROSE state NetRom status
axudp F6BVP-5 -> F6BVP-9 Connected Connected ---------
Fixes: 3b3fd068c5 ("rose: Fix Null pointer dereference in rose_send_frame()")
Signed-off-by: Bernard Pidoux <f6bvp@free.fr>
Suggested-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Thomas DL9SAU Osterried <thomas@osterried.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hardware sequencer in Intel Canon Lake and beyond supports also 64k
erase command. The SPI-NOR core uses SFDP (Serial Flash Discovery
Parameter) to figure out what the chip actually supports and only issues
64k erase if it is supported.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220816125537.89389-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel SPI flash controller has been supporting two chip selects long
time already even if the most common configuration is to have a single
flash chip for the BIOS and related data. This adds support for the
second chip select if we find out that there are two flash components
(this information is available in the mandatory flash descriptor on the
first chip). The second chip is exposed as is without any partition
information.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220816130818.89600-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I was too naive in just including <asm-generic/io.h> into
hexagon: one has to specify defines for every call that uses
a (static) inline or this will not work.
Fix it up by providing proper defines for all shorthands that
hexagon provides.
Compile-tested with hexagon LLVM which is the only working cross
compiler for hexagon ATM after commenting out the
-fno-inline-functions-called-once switch which isn't working
with LLVM.
Cc: Brian Cain <bcain@quicinc.com>
Cc: linux-hexagon@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 81c0386c13 ("regmap: mmio: Support accelerared noinc operations")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220818121227.151016-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
struct iio_chan_spec is meant to be opaque to IIO consumer drivers
which should only use the interfaces in linux/iio/consumer.h.
Use the provided accessor function to find get the type of the
channel instead of directly reading it form the structure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20220821160914.2207116-1-jic23@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm() sets pcm->no_device_suspend, but it sets other pcm->xxx
at the same function with different timing.
pcm->no_device_suspend setup timing has no effect. This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bksdgflq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On architecture where reading the SRAM is slower than the pace at
controller fills it, with interrupt enabled while reading from
SRAM FIFO causes unwanted interrupt storm to CPU.
The inner "bytes to read" loop never exits and waits for the completion
so it is enough to only enable the watermark interrupt when we
are out of bytes to read, which only happens when we start the
transfer (waiting for the FIFO to fill up initially) if the SRAM
is slow.
So only using read watermark interrupt, as the current implementation
doesn't utilize the SRAM full and indirect complete read interrupt.
And disable all the read interrupts while reading from SRAM.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Link: https://lore.kernel.org/r/20220813042616.1372110-1-niravkumar.l.rabara@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If regulator_enable() fails, enable_count is incremented still.
A consumer, assuming no matching regulator_disable() is necessary on
failure, will then get this error message upon regulator_put()
since enable_count is non-zero:
[ 1.277418] WARNING: CPU: 3 PID: 1 at drivers/regulator/core.c:2304 _regulator_put.part.0+0x168/0x170
The consumer could try to fix this in their driver by cleaning up on
error from regulator_enable() (i.e. call regulator_disable()), but that
results in the following since regulator_enable() failed and didn't
increment user_count:
[ 1.258112] unbalanced disables for vreg_l17c
[ 1.262606] WARNING: CPU: 4 PID: 1 at drivers/regulator/core.c:2899 _regulator_disable+0xd4/0x190
Fix this by decrementing enable_count upon failure to enable.
With this in place, just the reason for failure to enable is printed
as expected and developers can focus on the root cause of their issue
instead of thinking their usage of the regulator consumer api is
incorrect. For example, in my case:
[ 1.240426] vreg_l17c: invalid input voltage found
Fixes: 5451781dad ("regulator: core: Only count load for enabled consumers")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20220819194336.382740-1-ahalaney@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the first DMIC recording is power down, mtkaif_dmic will be reset.
This will cause configuration error in the second DMIC recording. So do
not reset mtkaif_dmic except in "MTKAIF_DMIC Switch" kcontrol.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/20220820071925.13557-1-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Horatiu Vultur says:
====================
net: lan966x: Add lag support
Add lag support for lan966x.
First 4 patches don't do any changes to the current behaviour, they
just prepare for lag support. While the rest is to add the lag support.
v3->v4:
- aggregation configuration is global for all bonds, so make sure that
there can't be enabled multiple configurations at the same time
- return error faster from lan966x_foreign_bridging_check, don't
continue the search if the error is seen already
- flush fdb workqueue when a port leaves a bridge or lag.
v2->v3:
- return error code from 'switchdev_bridge_port_offload()'
- fix lan966x_foreign_dev_check(), it was missing lag support
- remove lan966x_lag_mac_add_entry and lan966x_mac_del_entry as
they are not needed
- fix race conditions when accessing port->bond
- move FDB entries when a new port joins the lag if it has a lower
v1->v2:
- fix the LAG PGIDs when ports go down, in this way is not
needed anymore the last patch of the series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend MAC support to support also lag interfaces:
1. In case an entry is learned on a port that is part of lag interface,
then notify the upper layers that the entry is learned on the bond
interface
2. If a port leaves the bond and the port is the first port in the lag
group, then it is required to update all MAC entries to change the
destination port.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offload FDB entries when the original device is a lag interface. Because
all the ports under the lag have the same chip id, which is the chip id
of first port, then add the entries only for the first port.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add link aggregation hardware offload support for lan966x
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend lan966x_foreign_bridging_check to check also if the upper
interface is a lag device. Don't allow a lan966x port to be part of a
lag if it has foreign interfaces.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose lan966x_switchdev_nb and lan966x_switchdev_blocking_nb to the
lan966x_main.h file because they will be needed by the lag driver.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever a port leaves a bridge, flush the workqueue of the FDB work.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the function lan966x_fdb_event_work. One case for when the
orig_dev is a bridge and one case when orig_dev is lan966x port.
This is preparation for lag support. There is no functional change.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the registers used by lan966x to configure the lag interface.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder says:
====================
tsnep: Various minor driver improvements
During XDP development some general driver improvements has been done
which I want to keep out of future patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Other drivers record RX queue so it should make sense to do that also.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA addresses up to 64bit are supported by the device. Configure DMA
mask according to the capabilities of the device.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TX length can by calculated more efficient during map and unmap of
fragments. Another reason is that, by moving TX statistic counting to
tsnep_tx_poll() it can be used there for XDP too.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for NETIF_F_LOOPBACK feature. Loopback mode is used for
testing.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed register define is not used, but register definition shall be kept
in sync.
Fixes: 403f69bbdb ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently queue_userspace_packet will call kfree_skb for all frames,
whether or not an error occurred. This can result in a single dropped
frame being reported as multiple drops in dropwatch. This functions
caller may also call kfree_skb in case of an error. This patch will
consume the skbs instead and allow caller's to use kfree_skb.
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109957
Signed-off-by: David S. Miller <davem@davemloft.net>
Frames sent to userspace can be reported as dropped in
ovs_dp_process_packet, however, if they are dropped in the netlink code
then netlink_attachskb will report the same frame as dropped.
This patch checks for error codes which indicate that the frame has
already been freed.
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109946
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier says:
====================
net: Introduce QUSGMII phy mode
Re-sending, since the previous v4 was sent while net-next was closed.
This is a resend of the V4 of a previous series [1] initially aimed at
introducing inband extensions, with modes like QUSGMII. This mode allows
passing info in the ethernet preamble between the MAC and the PHY, such as
timestamps.
This series has now become a preliminary series, that simply introduces
the new interface mode, without support for inband extensions, that will
come later.
The reasonning is that work will need to be done in the networking
subsystem, but also in the generic phy driver subsystem to allow serdes
configuration for qusgmii.
This series add the mode, the relevant binding changes, adds support for
it in the lan966x driver, and also introduces a small helper to get the
number of links a given phy mode can carry (think 1 for SGMII and 4 for
QSGMII). This allows for better readability and will prove useful
when (if) we support PSGMII (5 links on 1 interface) and OUSGMII (8
links on one interface).
V4 contains no change but the collected Reviewed-by from Andrew.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The Lan996x controller supports the QUSGMII mode, which is very similar
to QSGMII in the way it's configured and the autonegociation
capababilities it provides.
This commit adds support for that mode, treating it most of the time
like QSGMII, making sure that we do configure the PCS how we should.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some phy modes such as QSGMII multiplex several MAC<->PHY links on one
single physical interface. QSGMII used to be the only one supported, but
other modes such as QUSGMII also carry multiple links.
This helper allows getting the number of links that are multiplexed
on a given interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new QUSGMII mode, standing for "Quad Universal Serial Gigabit
Media Independent Interface", a derivative of USGMII which, similarly to
QSGMII, allows to multiplex 4 1Gbps links to a Quad-PHY.
The main difference with QSGMII is that QUSGMII can include an extension
instead of the standard 7bytes ethernet preamble, allowing to convey
arbitrary data such as Timestamps.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QUSGMII mode is a derivative of Cisco's USXGMII standard. This
standard is pretty similar to SGMII, but allows for faster speeds, and
has the build-in bits for Quad and Octa variants (like QSGMII).
The main difference with SGMII/QSGMII is that USXGMII/QUSGMII re-uses
the preamble to carry various information, named 'Extensions'.
As of today, the USXGMII standard only mentions the "PCH" extension,
which is used to convey timestamps, allowing in-band signaling of PTP
timestamps without having to modify the frame itself.
This commit adds support for that mode. When no extension is in use, it
behaves exactly like QSGMII, although it's not compatible with QSGMII.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
On the CPSW and ICSS peripherals, there is a possibility that the MDIO
interface returns corrupt data on MDIO reads or writes incorrect data
on MDIO writes. There is also a possibility for the MDIO interface to
become unavailable until the next peripheral reset.
The workaround is to configure the MDIO in manual mode and disable the
MDIO state machine and emulate the MDIO protocol by reading and writing
appropriate fields in MDIO_MANUAL_IF_REG register of the MDIO controller
to manipulate the MDIO clock and data pins.
More details about the errata i2329 and the workaround is available in:
https://www.ti.com/lit/er/sprz487a/sprz487a.pdf
Add implementation to disable MDIO state machine, configure MDIO in manual
mode and achieve MDIO read and writes via MDIO Bitbanging
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTL8211F(D)(I)-VD-CG is the pin-to-pin upgrade chip from
RTL8211F(D)(I)-CG.
Add new PHY ID for this chip.
It does not support RTL8211F_PHYCR2 anymore, so remove the w/r operation
of this register.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The aspeed pinctrl parent node (SCU) in the examples is missing various
properties. Add the properties in preparation for the SCU schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220810161635.73936-2-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We dropped the x86-specific hack for WC-page allocations with a hope
that the standard dma_alloc_wc() works nowadays. Alas, it doesn't,
and we need to take back some workaround again, but in a different
form, as the previous one was broken for some platforms.
This patch re-introduces the x86-specific WC-page allocations, but it
uses rather the manual page allocations instead of
dma_alloc_coherent(). The use of dma_alloc_coherent() was also a
potential problem in the recent addition of the fallback allocation
for noncontig pages, and this patch eliminates both at once.
Fixes: 9882d63bea ("ALSA: memalloc: Drop x86-specific hack for WC allocations")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220821155911.10715-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If re-initialization results is a different signal voltage, because the
voltage switch failed previously, but not this time (or vice versa), then
sd3_bus_mode will be inconsistent with the card because the SD_SWITCH
command is done only upon first initialization.
Fix by always reading SD_SWITCH information during re-initialization, which
also means it does not need to be re-read later for the 1.8V fixup
workaround.
Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added
about 1% to 1.5% to the re-initialization time, so it's not particularly
significant.
Reported-by: Seunghui Lee <sh043.lee@samsung.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Tested-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When introduced, upon success, the 1.8V fixup workaround in
mmc_sd_init_card() would branch to practically the end of the function, to
a label named "done". Unfortunately, perhaps due to the label name, over
time new code has been added that really should have come after "done" not
before it. Let's fix the problem by moving the label to the correct place
and rename it "cont".
Fixes: 045d705dc1 ("mmc: core: Enable the MMC host software queue for the SD card")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
While looking at our current POSIX ACL handling in the context of some
overlayfs work I went through a range of other filesystems checking how they
handle them currently and encountered ntfs3.
The posic_acl_{from,to}_xattr() helpers always need to operate on the
filesystem idmapping. Since ntfs3 can only be mounted in the initial user
namespace the relevant idmapping is init_user_ns.
The posix_acl_{from,to}_xattr() helpers are concerned with translating between
the kernel internal struct posix_acl{_entry} and the uapi struct
posix_acl_xattr_{header,entry} and the kernel internal data structure is cached
filesystem wide.
Additional idmappings such as the caller's idmapping or the mount's idmapping
are handled higher up in the VFS. Individual filesystems usually do not need to
concern themselves with these.
The posix_acl_valid() helper is concerned with checking whether the values in
the kernel internal struct posix_acl can be represented in the filesystem's
idmapping. IOW, if they can be written to disk. So this helper too needs to
take the filesystem's idmapping.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: ntfs3@lists.linux.dev
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
TCP_LISTEN sockets is a special case. They preserve skb with a newly
connected sock till accept() makes it fully functional socket.
Receive queue of such socket may grow after connected peer
send messages there. Since these messages may contain scm_fds,
we should expose correct fdinfo::scm_fds for listening socket too.
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
From MTL onwards we support DSC 1.2, since there is hardcoding to minor
version 1, update it.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817124516.284456-1-jani.nikula@intel.com
Intel Meteor Lake has the same integrated Thunderbolt/USB4 controller as
Intel Alder Lake. Add the Intel Meteor Lake PCI IDs to the driver list
of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>