Some (Juniper MX5) SFP link partners exhibit a disinclination to
autonegotiate with X550 configured in SFI mode. This patch enables
a manual AN-37 restart to work around the problem.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sparse complains:
arch/riscv/kernel/traps.c:213:6: warning: symbol 'shadow_stack' was not declared. Should it be static?
The variable is used in entry.S, so declare shadow_stack there
alongside SHADOW_OVERFLOW_STACK_SIZE.
Fixes: 31da94c25a ("riscv: add VMAP_STACK overflow detection")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220814141237.493457-5-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fix the warning:
arch/riscv/kernel/signal.c:316:27: warning: no previous prototype for function 'do_notify_resume' [-Wmissing-prototypes]
asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
All other functions in the file are static & none of the existing
headers stood out as an obvious location. Create signal.h to hold the
declaration.
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220814141237.493457-4-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Wei Fang says:
====================
Add DT property to disable hibernation mode
The patches add the ability to disable the hibernation mode of AR803x
PHYs. Hibernation mode defaults to enabled after hardware reset on
these PHYs. If the AR803x PHYs enter hibernation mode, they will not
provide any clock. For some MACs, they might need the clocks which
provided by the PHYs to support their own hardware logic.
So, the patches add the support to disable hibernation mode by adding
a boolean:
qca,disable-hibernation-mode
If one wished to disable hibernation mode to better match with the
specifical MAC, just add this property in the phy node of DT.
====================
Link: https://lore.kernel.org/r/20220818030054.1010660-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the cable is unplugged, the Atheros AR803x PHYs will enter
hibernation mode after about 10 seconds if the hibernation mode
is enabled and will not provide any clock to the MAC. But for
some MACs, this feature might cause unexpected issues due to the
logic of MACs.
Taking SYNP MAC (stmmac) as an example, if the cable is unplugged
and the "eth0" interface is down, the AR803x PHY will enter
hibernation mode. Then perform the "ifconfig eth0 up" operation,
the stmmac can't be able to complete the software reset operation
and fail to init it's own DMA. Therefore, the "eth0" interface is
failed to ifconfig up. Why does it cause this issue? The truth is
that the software reset operation of the stmmac is designed to
depend on the RX_CLK of PHY.
So, this patch offers an option for the user to determine whether
to disable the hibernation mode of AR803x PHYs.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hibernation mode of Atheros AR803x PHYs defaults to be
enabled after hardware reset. When the cable is unplugged,
the PHY will enter hibernation mode after about 10 seconds
and the PHY clocks will be stopped to save power.
However, some MACs need the phy output clock for proper
functioning of their logic. For instance, stmmac needs the
RX_CLK of PHY for software reset to complete.
Therefore, add a DT property to configure the PHY to disable
this hardware hibernation mode.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goal here is the fix the incorrectly reported arch topology on
RISC-V which seems to have been broken since it was added.
cpu, package and thread IDs are all currently reported as -1, so tools
like lstopo think systems have multiple threads on the same core when
this is not true:
https://github.com/open-mpi/hwloc/issues/536
arm64's topology code basically applies to RISC-V too, so it has been
made generic along with the removal of MPIDR related code, which
appears to be redudant code since '3102bc0e6a ("arm64: topology: Stop
using MPIDR for topology information")' replaced the code that actually
interacted with MPIDR with default values.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCYvq5lAAKCRB4tDGHoIJi
0s6GAQC9GFom3cRkmxcNZeLErhXSfBpzjPH9B76HU1HzZaKzqAEAhVSenCqLyyv7
RgR7icTAw0+7tpR5TTAHQajOVnlnZwA=
=8RGe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vPGY
-----END PGP SIGNATURE-----
Merge tag 'riscv-topo-on-6.0-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ into for-next
Fix RISC-V's topology reporting
The goal here is the fix the incorrectly reported arch topology on
RISC-V which seems to have been broken since it was added.
cpu, package and thread IDs are all currently reported as -1, so tools
like lstopo think systems have multiple threads on the same core when
this is not true:
https://github.com/open-mpi/hwloc/issues/536
arm64's topology code basically applies to RISC-V too, so it has been
made generic along with the removal of MPIDR related code, which
appears to be redudant code since '3102bc0e6a ("arm64: topology: Stop
using MPIDR for topology information")' replaced the code that actually
interacted with MPIDR with default values.
* tag 'riscv-topo-on-6.0-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/:
riscv: topology: fix default topology reporting
arm64: topology: move store_cpu_topology() to shared code
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a dev_err_probe message. Fix it.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220803123018.913710-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 451ef36bd2 ("ip_tunnels: Add new flow flags field to ip_tunnel_key")
added a "flow_flags" member to struct ip_tunnel_key which was later used by
the commit in the fixes tag to avoid dropping packets with sources that
aren't locally configured when set in bpf_set_tunnel_key().
VXLAN and GENEVE were made to respect this flag, ip tunnels like IPIP and GRE
were not.
This commit fixes this omission by making ip_tunnel_init_flow() receive
the flow flags from the tunnel key in the relevant collect_md paths.
Fixes: b8fff74852 ("bpf: Set flow flag to allow any source IP in bpf_tunnel_key")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Paul Chaignon <paul@isovalent.com>
Link: https://lore.kernel.org/bpf/20220818074118.726639-1-eyal.birger@gmail.com
The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual
Flash LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.
Add support for the Type-C & Power Delivery controller in
MediaTek MT6370 IC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Link: https://lore.kernel.org/r/20220815090125.27705-8-peterwu.pub@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err_probe() already prints the error code in a human readable way, so
there is no need to duplicate it as a numerical value at the end of the
message.
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7505a9dfa1e097070c492d6f6f84afa2a490b040.1659763173.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert Qualcomm SCM firmware binding to the yaml format.
This commit also:
- adds qcom,scm-mdm9607 into list which has only core clock
- adds qcom,scm-sm6125, qcom,scm-ipq6018
- #reset-cells, because the property is already used
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708090431.30437-1-david@ixit.cz
In qcom_smem_state_register() and qcom_smem_state_release(), we
should better use of_node_get() and of_node_put() for the reference
creation and destruction of 'device_node'.
Fixes: 9460ae2ff3 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-2-windhl@126.com
There are two refcount leak bugs in qcom_smsm_probe():
(1) The 'local_node' is escaped out from for_each_child_of_node() as
the break of iteration, we should call of_node_put() for it in error
path or when it is not used anymore.
(2) The 'node' is escaped out from for_each_available_child_of_node()
as the 'goto', we should call of_node_put() for it in goto target.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220721135217.1301039-1-windhl@126.com
The SDM845 comes with few instances of Bandwidth Monitor. The already
supported one monitors traffic between CPU and Last Level Cache
Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
register layout).
SDM845 also has also BWMON instance measuring traffic between LLCC and
memory with different register layout: called v5.
Add support for this "LLCC" BWMON. Differences against existing v4 one:
1. No global interrupts.
2. Different register layout.
3. Different shift of interrupt fields.
4. Smaller sampling window.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-10-krzysztof.kozlowski@linaro.org
Refactor the code to prepare it for supporting BWMON v5 which comes with
different register layout by:
1. Adding use of MMIO regmap and regmap fields which allows to keep one
code logic with different register maps.
2. The "clear" type registers do not allow reading, therefore regmap
requires using cache with default values.
3. regmap has an effect of introducing barriers after each readl/writel,
which should negligible effect as only few writes were relaxed.
4. Additionally usage of regmap fields removes need of shifting the
register values.
5. Add "V4" prefix to names of all defines with register addresses (so
BWMON_V4_xxx) to differentiate it from V5. The actual register values
are shared so keep their naming.
6. While changing the defines, pad register addresses to three digits
for readability.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-8-krzysztof.kozlowski@linaro.org
Versions v4 and v5 of BWMON on SDM845 use different unit count, so allow
easier variant customization by storing its value in struct
icc_bwmon_data.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-7-krzysztof.kozlowski@linaro.org
The hardware programming guide recommends to clear all registers on
first initialization, through separate field in BWMON_CLEAR register.
This makes sense in general but especially if driver is rebound to avoid
spurious/early interrupts.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-6-krzysztof.kozlowski@linaro.org
Instead of copying pieces of variant-specific data (struct
icc_bwmon_data) into the state container (struct icc_bwmon), just store
a pointer to it.
This simplifies a bit the code and allows later to grow easily the
variant-specific data for new BWMON v5.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-5-krzysztof.kozlowski@linaro.org
The interrupt enable, status and clear registers have the same layout,
so BWMON_GLOBAL_IRQ_ENABLE_ENABLE define can be used also for clearing
IRQ, instead of hard-coded value.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-3-krzysztof.kozlowski@linaro.org
Add compatible for SDM845 Bandwidth Monitor instance measuring traffic
between LLCC and memory. It comes with different register layout:
called v5.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-2-krzysztof.kozlowski@linaro.org
The ARM Qualcomm entry should cover also its defconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-5-krzysztof.kozlowski@linaro.org
Enable Qualcomm drivers:
1. Command DB (used in SDX55 and SDX65).
2. On Chip Memory - OCMEM (used in MSM8974)
3. RPMh and RPMh Power domain (used in SDX55 and SDX65).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-3-krzysztof.kozlowski@linaro.org
Enable Qualcomm drivers:
1. socinfo driver to provide some basic information about the
SoC being used.
2. Remote filesystem memory driver (used in MSM8974).
3. RPM Power domain (used in MSM8226).
4. Sleep stats driver (used in MSM8916, MSM8974 and APQ8084).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220727065830.10681-2-krzysztof.kozlowski@linaro.org
The Qualcomm DWC3 driver suspend implementation appears to be incomplete
for SC8280XP so keep the USB power domains always-on for now so that the
controller survives a suspend cycle.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805121250.10347-3-johan+linaro@kernel.org
The Qualcomm PCIe driver does not yet implement suspend so to keep the
PCIe power domains always-on for now to avoid crashing during resume.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805121250.10347-2-johan+linaro@kernel.org
onboard_hub_power_off() currently has a delay after asserting the
reset of the hub. There is already a delay in onboard_hub_power_on()
before de-asserting the reset, which ensures that the reset is
asserted for the required time, so the delay in _power_off() is not
needed.
Skip the reset GPIO check before calling gpiod_set_value_cansleep(),
the function returns early when the GPIO descriptor is NULL.
Reviewed-By: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220805111836.1.Id5a4dc0a2c046236116693aa55672295513a0f2a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Relocate the pullups_connected check until after it is ensured that there
are no runtime PM transitions. If another context triggered the DWC3
core's runtime resume, it may have already enabled the Run/Stop. Do not
re-run the entire pullup sequence again, as it may issue a core soft
reset while Run/Stop is already set.
This patch depends on
commit 69e131d1ac ("usb: dwc3: gadget: Prevent repeat pullup()")
Fixes: 77adb8bdf4 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the necessary ACPI ID for Intel Meteor Lake
IOM devices.
The callback function is_memory() is modified so that it
also checks if the resource descriptor passed to it is a
memory type "Address Space Resource Descriptor".
On Intel Meteor Lake the ACPI memory resource is not
described using the "32-bit Memory Range Descriptor" because
the memory is outside of the 32-bit address space. The
memory resource is described using the "Address Space
Resource Descriptor" instead.
Intel Meteor Lake is the first platform to describe the
memory resource for this device with Address Space Resource
Descriptor, but it most likely will not be the last.
Therefore the change to the is_memory() callback function
is made generic.
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Cc: stable@vger.kernel.org
[ heikki: Rewrote the commit message. ]
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device does not remember its MAC address, so add a possibility
to get it from the platform. If it fails, generate a random address.
This will provide a MAC address early during boot without user space
being involved.
Also remove extra calls to is_valid_ether_addr().
Made after suggestions by Andrew Lunn:
1) Use eth_hw_addr_random() to assign a random MAC address during probe.
2) Remove is_valid_ether_addr() from moxart_mac_open()
3) Add a call to platform_get_ethdev_address() during probe
4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this
v1 -> v2:
Handle EPROBE_DEFER returned from platform_get_ethdev_address().
Move MAC reading code to the beginning of the probe function.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
CC: Yang Yingliang <yangyingliang@huawei.com>
CC: Pavel Skripkin <paskripkin@gmail.com>
CC: Guobin Huang <huangguobin4@huawei.com>
CC: Yang Wei <yang.wei9@zte.com.cn>
CC: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang says:
====================
tcp: some bug fixes for tcp_read_skb()
This patchset contains 3 bug fixes and 1 minor refactor patch for
tcp_read_skb(). V1 only had the first patch, as Eric prefers to fix all
of them together, I have to group them together.
====================
Link: https://lore.kernel.org/r/20220817195445.151609-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When skb->len==0, the recv_actor() returns 0 too, but we also use 0
for error conditions. This patch amends this by propagating the errors
to tcp_read_skb() so that we can distinguish skb->len==0 case from
error cases.
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As tcp_read_skb() only reads one skb at a time, the while loop is
unnecessary, we can turn it into an if. This also simplifies the
code logic.
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it
assumes the skb is not yet dequeued. This is no longer true for
tcp_read_skb() case where we dequeue the skb first.
Fix this by introducing a helper __tcp_cleanup_rbuf() which does
not require any skb and calling it in tcp_read_skb().
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before commit 965b57b469 ("net: Introduce a new proto_ops
->read_skb()"), skb was not dequeued from receive queue hence
when we close TCP socket skb can be just flushed synchronously.
After this commit, we have to uncharge skb immediately after being
dequeued, otherwise it is still charged in the original sock. And we
still need to retain skb->sk, as eBPF programs may extract sock
information from skb->sk. Therefore, we have to call
skb_set_owner_sk_safe() here.
Fixes: 965b57b469 ("net: Introduce a new proto_ops ->read_skb()")
Reported-and-tested-by: syzbot+a0e6f8738b58f7654417@syzkaller.appspotmail.com
Tested-by: Stanislav Fomichev <sdf@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit c23d92b80e ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.
However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.
(FREE from device detaching) | (USE from requests)
igb_remove | igb_msix_other
igb_disable_sriov | igb_msg_task
kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count
adapter->vfs_allocated_count = 0 |
To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 7194792308 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce5
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")
Fixes: c23d92b80e ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>