Commit graph

1,189,987 commits

Author SHA1 Message Date
Al Viro
47091e4ed9 dma_buf_getfile(): don't bother with ->f_flags reassignments
just pass the already sanitized value to alloc_file_pseudo().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-08-17 17:25:54 -04:00
Al Viro
25885a35a7 Change calling conventions for filldir_t
filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop".  Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).

So let's just return bool ("should we keep going?") - it's less confusing
that way.  The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
	do something for everything in directory, until we run into problem
and
	find an entry in directory and do something to it.

The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.

"true means stop" would be more natural for the second group; "true
means keep going" - for the first one.  I tried both variants and
the things like
	if allocation failed
		something = -ENOMEM;
		return true;
just looked unnatural and asking for trouble.

[folded suggestion from Matthew Wilcox <willy@infradead.org>]
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-08-17 17:25:04 -04:00
Daniele Ceraolo Spurio
f922fbb0f2 drm/i915/guc: clear stalled request after a reset
If the GuC CTs are full and we need to stall the request submission
while waiting for space, we save the stalled request and where the stall
occurred; when the CTs have space again we pick up the request submission
from where we left off.

If a full GT reset occurs, the state of all contexts is cleared and all
non-guilty requests are unsubmitted, therefore we need to restart the
stalled request submission from scratch. To make sure that we do so,
clear the saved request after a reset.

Fixes note: the patch that introduced the bug is in 5.15, but no
officially supported platform had GuC submission enabled by default
in that kernel, so the backport to that particular version (and only
that one) can potentially be skipped.

Fixes: 925dc1cf58 ("drm/i915/guc: Implement GuC submission tasklet")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220811210812.3239621-1-daniele.ceraolospurio@intel.com
2022-08-17 13:53:55 -07:00
Andrii Nakryiko
df78da2726 selftests/bpf: Few fixes for selftests/bpf built in release mode
Fix few issues found when building and running test_progs in
release mode.

First, potentially uninitialized idx variable in xskxceiver,
force-initialize to zero to satisfy compiler.

Few instances of defining uprobe trigger functions break in release mode
unless marked as noinline, due to being static. Add noinline to make
sure everything works.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-5-andrii@kernel.org
2022-08-17 22:43:58 +02:00
Andrii Nakryiko
abf84b64e3 libbpf: Clean up deprecated and legacy aliases
Remove three missed deprecated APIs that were aliased to new APIs:
bpf_object__unload, bpf_prog_attach_xattr and btf__load.

Also move legacy API libbpf_find_kernel_btf (aliased to
btf__load_vmlinux_btf) into libbpf_legacy.h.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org
2022-08-17 22:42:56 +02:00
Andrii Nakryiko
813847a314 libbpf: Streamline bpf_attr and perf_event_attr initialization
Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.

Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org
2022-08-17 22:42:10 +02:00
Andrii Nakryiko
d4e6d684f3 libbpf: Fix potential NULL dereference when parsing ELF
Fix if condition filtering empty ELF sections to prevent NULL
dereference.

Fixes: 47ea7417b0 ("libbpf: Skip empty sections in bpf_object__init_global_data_maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-2-andrii@kernel.org
2022-08-17 22:42:10 +02:00
Daniele Ceraolo Spurio
b0f2eb942b drm/i915/guc: skip scrub_ctbs selftest if reset is disabled
The test needs GT reset to trigger the scrubbing logic, so we can only
run it when reset is enabled.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708224158.929327-1-daniele.ceraolospurio@intel.com
2022-08-17 13:34:53 -07:00
Liu Jian
583585e48d skmsg: Fix wrong last sg check in sk_msg_recvmsg()
Fix one kernel NULL pointer dereference as below:

[  224.462334] Call Trace:
[  224.462394]  __tcp_bpf_recvmsg+0xd3/0x380
[  224.462441]  ? sock_has_perm+0x78/0xa0
[  224.462463]  tcp_bpf_recvmsg+0x12e/0x220
[  224.462494]  inet_recvmsg+0x5b/0xd0
[  224.462534]  __sys_recvfrom+0xc8/0x130
[  224.462574]  ? syscall_trace_enter+0x1df/0x2e0
[  224.462606]  ? __do_page_fault+0x2de/0x500
[  224.462635]  __x64_sys_recvfrom+0x24/0x30
[  224.462660]  do_syscall_64+0x5d/0x1d0
[  224.462709]  entry_SYSCALL_64_after_hwframe+0x65/0xca

In commit 9974d37ea7 ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.

Fixes: 9974d37ea7 ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220809094915.150391-1-liujian56@huawei.com
2022-08-17 22:33:20 +02:00
Chris Morgan
24c06e000e Input: adc-joystick - add polled input device support
Add polled input device support to the adc-joystick driver. This is
useful for devices which do not have hardware capable triggers on
their SARADC. Code modified from adc-joystick.c changes made by Maya
Matuszczyk.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220816210440.14260-3-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-17 12:32:51 -07:00
Chris Morgan
c42a5ff530 dt-bindings: adc-joystick: add poll-interval
Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/20220816210440.14260-2-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-17 12:32:51 -07:00
Eddie James
2e6f34faa7 Input: Add IBM Operation Panel driver
Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts
Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-17 12:32:32 -07:00
Eddie James
bc604fbb49 dt-bindings: input: Add documentation for IBM Operation Panel
Document the bindings for the IBM Operation Panel, which provides
a simple interface to control a server. It has a display and three
buttons.
Also update MAINTAINERS for the new file.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220809204147.238132-2-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-08-17 12:32:02 -07:00
Dmitry Torokhov
93fbff1197 Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.
2022-08-17 12:30:00 -07:00
Arun Ramadoss
36c0d93501 net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.

Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 12:09:01 -07:00
David Howells
932c29a10d locks: Fix dropped call to ->fl_release_private()
Prior to commit 4149be7bda, sys_flock() would allocate the file_lock
struct it was going to use to pass parameters, call ->flock() and then call
locks_free_lock() to get rid of it - which had the side effect of calling
locks_release_private() and thus ->fl_release_private().

With commit 4149be7bda, however, this is no longer the case: the struct
is now allocated on the stack, and locks_free_lock() is no longer called -
and thus any remaining private data doesn't get cleaned up either.

This causes afs flock to cause oops.  Kasan catches this as a UAF by the
list_del_init() in afs_fl_release_private() for the file_lock record
produced by afs_fl_copy_lock() as the original record didn't get delisted.
It can be reproduced using the generic/504 xfstest.

Fix this by reinstating the locks_release_private() call in sys_flock().
I'm not sure if this would affect any other filesystems.  If not, then the
release could be done in afs_flock() instead.

Changes
=======
ver #2)
 - Don't need to call ->fl_release_private() after calling the security
   hook, only after calling ->flock().

Fixes: 4149be7bda ("fs/lock: Don't allocate file_lock in flock_make_lock().")
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/166075758809.3532462.13307935588777587536.stgit@warthog.procyon.org.uk/ # v1
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
2022-08-17 15:08:58 -04:00
Daniel Lezcano
06f3605512 Revert "mlxsw: core: Add the hottest thermal zone detection"
This reverts commit 2dc2f76005 and
commit 6f73862fab.

As discussed in the thread:

https://lore.kernel.org/all/f3c62ebe-7d59-c537-a010-bff366c8aeba@linaro.org/

the feature provided by commits 2dc2f76005 and 6f73862fab is
actually already handled by the thermal framework via the cooling
device state aggregation, thus all this code is pointless.

The revert conflicts with the following changes:
 - 7f4957be0d: thermal: Use mode helpers in drivers
 - 6a79507cfe: mlxsw: core: Extend thermal module with per QSFP module thermal zones

These conflicts were fixed and the resulting changes are in this patch.

Both reverts are in the same change as requested by Ido Schimmel:

https://lore.kernel.org/all/Yvz7+RUsmVco3Xpj@shredder/

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220817153040.2464245-1-daniel.lezcano@linaro.org
2022-08-17 20:32:27 +02:00
Jakub Kicinski
fd78d07c7c Merge branch 'net-dsa-bcm_sf2-utilize-phylink-for-all-ports'
Florian Fainelli says:

====================
net: dsa: bcm_sf2: Utilize PHYLINK for all ports

This patch series has the bcm_sf2 driver utilize PHYLINK to configure
the CPU port link parameters to unify the configuration and pave the way
for DSA to utilize PHYLINK for all ports in the future.

Tested on BCM7445 and BCM7278
====================

Link: https://lore.kernel.org/r/20220815175009.2681932-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 10:55:07 -07:00
Florian Fainelli
4d2f6dde4d net: dsa: bcm_sf2: Have PHYLINK configure CPU/IMP port(s)
Remove the artificial limitations imposed upon
bcm_sf2_sw_mac_link_{up,down} and allow us to override the link
parameters for IMP port(s) as well as regular ports by accounting for
the special differences that exist there.

Remove the code that did override the link parameters in
bcm_sf2_imp_setup().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 10:55:03 -07:00
Florian Fainelli
1ed26ce485 net: dsa: bcm_sf2: Introduce helper for port override offset
Depending upon the generation of switches, we have different offsets for
configuring a given port's status override where link parameters are
applied. Introduce a helper function that we re-use throughout the code
in order to let phylink callbacks configure the IMP/CPU port(s) in
subsequent changes.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 10:55:03 -07:00
Heinrich Schuchardt
34fc9cc3ae riscv: dts: microchip: correct L2 cache interrupts
The "PolarFire SoC MSS Technical Reference Manual" documents the
following PLIC interrupts:

1 - L2 Cache Controller Signals when a metadata correction event occurs
2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs
3 - L2 Cache Controller Signals when a data correction event occurs
4 - L2 Cache Controller Signals when an uncorrectable data event occurs

This differs from the SiFive FU540 which only has three L2 cache related
interrupts.

The sequence in the device tree is defined by an enum:

    enum {
            DIR_CORR = 0,
            DATA_CORR,
            DATA_UNCORR,
            DIR_UNCORR,
    };

So the correct sequence of the L2 cache interrupts is

    interrupts = <1>, <3>, <4>, <2>;

[Conor]
This manifests as an unusable system if the l2-cache driver is enabled,
as the wrong interrupt gets cleared & the handler prints errors to the
console ad infinitum.

Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
CC: stable@vger.kernel.org # 5.15: e35b07a7df: riscv: dts: microchip: mpfs: Group tuples in interrupt properties
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-08-17 18:39:19 +01:00
Tejun Heo
4f7e723643 cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock
Bringing up a CPU may involve creating and destroying tasks which requires
read-locking threadgroup_rwsem, so threadgroup_rwsem nests inside
cpus_read_lock(). However, cpuset's ->attach(), which may be called with
thredagroup_rwsem write-locked, also wants to disable CPU hotplug and
acquires cpus_read_lock(), leading to a deadlock.

Fix it by guaranteeing that ->attach() is always called with CPU hotplug
disabled and removing cpus_read_lock() call from cpuset_attach().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-and-tested-by: Imran Khan <imran.f.khan@oracle.com>
Reported-and-tested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Fixes: 05c7b7a92c ("cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug")
Cc: stable@vger.kernel.org # v5.17+
2022-08-17 07:36:05 -10:00
Beniamin Sandu
815f5f5741 net: sfp: use simplified HWMON_CHANNEL_INFO macro
This makes the code look cleaner and easier to read.

Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com>
Link: https://lore.kernel.org/r/20220813204658.848372-1-beniaminsandu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 10:16:41 -07:00
Johan Hovold
ca1ce7207e arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add alternate touchpad
Add support for the alternate (second-source) touchpad found on some
X13s laptops.

Note that alternate touchpad is kept disabled for now. The boot firmware
should determine which device is actually populated and enable only the
corresponding node.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-8-johan+linaro@kernel.org
2022-08-17 12:07:40 -05:00
Johan Hovold
7093465237 arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: mark HID wakeup sources
The touchpad and keyboard can wake the system from suspend so declare
them as wakeup sources.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-7-johan+linaro@kernel.org
2022-08-17 12:07:40 -05:00
Johan Hovold
97cc7ab3fb arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: move HID pin config
The HID pin configurations belong in the HID nodes rather than i2c bus
node.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-6-johan+linaro@kernel.org
2022-08-17 12:07:40 -05:00
Johan Hovold
e11978de1e arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: disable touchscreen pull-up
The (optional) touchscreen interrupt line has an external pull-up so
disable the internal one as is done for the keyboard and touchpad.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-5-johan+linaro@kernel.org
2022-08-17 12:07:40 -05:00
Johan Hovold
cf2a7f3c52 arm64: dts: qcom: sc8280xp-crd: mark HID wakeup sources
The touchpad and keyboard can wake the system from suspend so declare
them as wakeup sources.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-4-johan+linaro@kernel.org
2022-08-17 12:07:40 -05:00
Johan Hovold
ffe469eaa2 arm64: dts: qcom: sc8280xp-crd: move HID pin config
The HID pin configurations belong in the HID nodes rather than i2c bus
node.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-3-johan+linaro@kernel.org
2022-08-17 12:07:40 -05:00
Johan Hovold
6af72a312d arm64: dts: qcom: sc8280xp-crd: disable touchscreen pull-up
The touchscreen interrupt line has an external pull-up so disable the
internal one as is done for the keyboard and touchpad.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-2-johan+linaro@kernel.org
2022-08-17 12:07:39 -05:00
Krzysztof Kozlowski
7921bd3d96 arm64: dts: qcom: sdm845: add LLCC BWMON
The SDM845 comes with few instances of Bandwidth Monitor.  The already
supported one monitors traffic between CPU and Last Level Cache
Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
register layout).

SDM845 also has also BWMON instance measuring traffic between LLCC and
memory with different register layout: called v5.

Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-12-krzysztof.kozlowski@linaro.org
2022-08-17 12:07:39 -05:00
Krzysztof Kozlowski
300b5f661e arm64: dts: qcom: sdm845: narrow LLCC address space
The Last Level Cache Controller (LLCC) device does not need to access
entire LLCC address space.  Currently driver uses only hardware info and
status registers which both reside in LLCC0_COMMON range (offset
0x30000, size 0x1000).  Narrow the address space to allow binding other
drivers to rest of LLCC address space.

Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reported-by: Steev Klimaszewski <steev@kali.org>
Suggested-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-11-krzysztof.kozlowski@linaro.org
2022-08-17 12:07:39 -05:00
John Harrison
b092e4a9d3 drm/i915/guc: Reduce spam from error capture
Some debug code got left in when the GuC based register save for error
capture was added. Remove that.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-8-John.C.Harrison@Intel.com
2022-08-17 10:07:08 -07:00
John Harrison
8ad0152afb drm/i915/guc: Make GuC log sizes runtime configurable
The GuC log buffer sizes had to be configured statically at compile
time. This can be quite troublesome when needing to get larger logs
out of a released driver. So re-organise the code to allow a boot time
module parameter override.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-7-John.C.Harrison@Intel.com
2022-08-17 10:07:04 -07:00
Chris Wilson
5ece208ab0 drm/i915/guc: Use streaming loads to speed up dumping the guc log
Use a temporary page and mempy_from_wc to reduce the time it takes to
dump the guc log to debugfs.

Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-6-John.C.Harrison@Intel.com
2022-08-17 10:07:03 -07:00
John Harrison
c5de70f6e1 drm/i915/guc: Record CTB info in error logs
When debugging GuC communication issues, it is useful to have the CTB
info available. So add the state and buffer contents to the error
capture log.

Also, add a sub-structure for the GuC specific error capture info as
it is now becoming numerous.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-5-John.C.Harrison@Intel.com
2022-08-17 10:06:59 -07:00
John Harrison
368d179adb drm/i915/guc: Add GuC <-> kernel time stamp translation information
It is useful to be able to match GuC events to kernel events when
looking at the GuC log. That requires being able to convert GuC
timestamps to kernel time. So, when dumping error captures and/or GuC
logs, include a stamp in both time zones plus the clock frequency.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-4-John.C.Harrison@Intel.com
2022-08-17 10:06:54 -07:00
John Harrison
56c7f0e202 drm/i915/guc: Fix capture size warning and bump the size
There was a size check to warn if the GuC error state capture buffer
allocation would be too small to fit a reasonable amount of capture
data for the current platform. Unfortunately, the test was done too
early in the boot sequence and was actually testing 'if(-ENODEV >
size)'.

Move the check to be later. The check is only used to print a warning
message, so it doesn't really matter how early or late it is done.
Note that it is not possible to dynamically size the buffer because
the allocation needs to be done before the engine information is
available (at least, it would be in the intended two-phase GuC init
process).

Now that the check works, it is reporting size too small for newer
platforms. The check includes a 3x oversample multiplier to allow for
multiple error captures to be bufferd by GuC before i915 has a chance
to read them out. This is less important than simply being big enough
to fit the first capture.

So a) bump the default size to be large enough for one capture minimum
and b) make the warning only if one capture won't fit, instead use a
notice for the 3x size.

Note that the size estimate is a worst case scenario. Actual captures
will likely be smaller.

Lastly, use drm_warn istead of DRM_WARN as the former provides more
infmration and the latter is deprecated.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-3-John.C.Harrison@Intel.com
2022-08-17 10:06:49 -07:00
Alan Previn
5ce27d6210 drm/i915/guc: Add a helper for log buffer size
Add a helper to get GuC log buffer size.

Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-2-John.C.Harrison@Intel.com
2022-08-17 10:06:46 -07:00
Shengjiu Wang
cb225ac125
ASoC: fsl_sai: Remove unnecessary FIFO reset in ISR
The FIFO reset drops the words in the FIFO, which may cause
channel swap when SAI module is running, especially when the
DMA speed is low. So it is not good to do FIFO reset in ISR,
then remove the operation.

Fixes: e2681a1bf5 ("ASoC: fsl_sai: Add isr to deal with error flag")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1660713867-26921-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-17 18:05:52 +01:00
Mark Brown
e6f4bddefd
ASoC: cs42l42: Some small code improvements
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

This is a collection of minor improvements to the code or comments.
2022-08-17 18:05:13 +01:00
Hao Luo
738a2f2f91 selftests/bpf: Tests libbpf autoattach APIs
Adds test for libbpf APIs that toggle bpf program auto-attaching.

Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816234012.910255-2-haoluo@google.com
2022-08-17 09:42:07 -07:00
Hao Luo
43cb8cbadf libbpf: Allows disabling auto attach
Adds libbpf APIs for disabling auto-attach for individual functions.
This is motivated by the use case of cgroup iter [1]. Some iter
types require their parameters to be non-zero, therefore applying
auto-attach on them will fail. With these two new APIs, users who
want to use auto-attach and these types of iters can disable
auto-attach on the program and perform manual attach.

[1] https://lore.kernel.org/bpf/CAEf4BzZ+a2uDo_t6kGBziqdz--m2gh2_EUwkGLDtMd65uwxUjA@mail.gmail.com/

Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816234012.910255-1-haoluo@google.com
2022-08-17 09:40:47 -07:00
Niklas Cassel
99ad3f9f82 ata: libata-core: improve parameter names for ata_dev_set_feature()
ata_dev_set_feature() is currently used for enabling/disabling any ATA
feature, e.g. SETFEATURES_SPINUP and SETFEATURE_SENSE_DATA, i.e. it is
not only used to enable/disable SATA specific features.

For most features, the enable/disable bit is specified in the subcommand
specific field "count".
It is only for the specific subcommands "Enable SATA feature" (0x10) and
"Disable SATA feature" (0x90) where the field "count" is used to specify
a feature instead of enable/disable. The parameter names for this
function are thus quite misleading.

Rename the parameter names to be more generic and in line with ACS-5,
and remove the references to "SATA FEATURES" in the kernel-doc.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-08-18 01:40:42 +09:00
Tomas Henzl
16169fb781 ata: libata-core: Print timeout value when internal command times
Printing the timeout value may help in troubleshooting failures.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-08-18 01:40:29 +09:00
Sylwester Dziedziuch
664d464618 ice: Fix VF not able to send tagged traffic with no VLAN filters
VF was not able to send tagged traffic when it didn't
have any VLAN interfaces and VLAN anti-spoofing was enabled.
Fix this by allowing VFs with no VLAN filters to send tagged
traffic. After VF adds a VLAN interface it will be able to
send tagged traffic matching VLAN filters only.

Testing hints:
1. Spawn VF
2. Send tagged packet from a VF
3. The packet should be sent out and not dropped
4. Add a VLAN interface on VF
5. Send tagged packet on that VLAN interface
6. Packet should be sent out and not dropped
7. Send tagged packet with id different than VLAN interface
8. Packet should be dropped

Fixes: daf4dd1643 ("ice: Refactor spoofcheck configuration functions")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17 09:30:44 -07:00
Benjamin Mikailenko
79956b83ed ice: Ignore error message when setting same promiscuous mode
Commit 1273f89578 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.

This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.

Fix this by ignoring cases where requested promiscuous mode exists.

Fixes: 1273f89578 ("ice: Fix broken IFF_ALLMULTI handling")
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17 09:30:44 -07:00
Grzegorz Siwik
abddafd458 ice: Fix clearing of promisc mode with bridge over bond
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.

[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!

Fixes: c31af68a1b ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17 09:30:32 -07:00
Grzegorz Siwik
11e551a2ef ice: Ignore EEXIST when setting promisc mode
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.

Fixes: 5eda8afd6b ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17 09:30:23 -07:00
Grzegorz Siwik
ffa9ed8652 ice: Fix double VLAN error when entering promisc mode
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.

This issue was missed in the initial implementation of double VLAN
mode.

Fixes: 5eda8afd6b ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17 09:29:50 -07:00