Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Consistently use the SYM* family of macros instead of the
deprecated ENTRY(), ENDPROC(), etc. family of macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The kasan mem*() functions are not used anymore since s390 has switched
to GENERIC_ENTRY and commit 69d4c0d321 ("entry, kasan, x86: Disallow
overriding mem*() functions").
Therefore remove the now dead code, similar to x86.
While at it also use the SYM* macros in mem.S.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To allow calling of DAT-off code from kernel the stack needs
to be switched to nodat_stack (or other stack mapped as 1:1).
Before call_nodat() macro was introduced that was necessary
to provide the very same memory address for STNSM and STOSM
instructions. If the kernel would stay on a random stack
(e.g. a virtually mapped one) then a virtual address provided
for STNSM instruction could differ from the physical address
needed for the corresponding STOSM instruction.
After call_nodat() macro is introduced the kernel stack does
not need to be mapped 1:1 anymore, since the macro stores the
physical memory address of return PSW in a register before
entering DAT-off mode. This way the return LPSWE instruction
is able to pick the correct memory location and restore the
DAT-on mode. That however might fail in case the 16-byte return
PSW happened to cross page boundary: PSW mask and PSW address
could end up in two separate non-contiguous physical pages.
Align the return PSW on 16-byte boundary so it always fits
into a single physical page. As result any stack (including
the virtually mapped one) could be used for calling DAT-off
code and prior switching to nodat_stack becomes unnecessary.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Calling kdump kernel is a two-step process that involves
invocation of the purgatory code: first time - to verify
the new kernel checksum and second time - to call the new
kernel itself.
The purgatory code operates on real addresses and does not
expect any memory protection. Therefore, before the purgatory
code is entered the DAT mode is always turned off. However,
it is only restored upon return from the new kernel checksum
verification. In case the purgatory was called to start the
new kernel and failed the control is returned to the old
kernel, but the DAT mode continues staying off.
The new kernel start failure is unlikely and leads to the
disabled wait state anyway. Still that poses a risk, since
the kernel code in general is not DAT-off safe and even
calling the disabled_wait() function might crash.
Introduce call_nodat() macro that allows entering DAT-off
mode, calling an arbitrary function and restoring DAT mode
back on. Switch all invocations of DAT-off code to that
macro and avoid the above described scenario altogether.
Name the call_nodat() macro in small letters after the
already existing call_on_stack() and put it to the same
header file.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
[hca@linux.ibm.com: some small modifications to call_nodat() macro]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Avoid unnecessary run-time and compile-time type
conversions of do_start_kdump() function return
value and parameter.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The kernel code is not guaranteed DAT-off mode safe.
Turn the DAT mode off immediately before entering the
purgatory.
Further, to avoid subtle side effects reset the system
immediately before turning DAT mode off while making
all necessary preparations in advance.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The KVM_REG_SIZE() comes from the ioctl and it can be a power of two
between 0-32768 but if it is more than sizeof(long) this will corrupt
memory.
Fixes: 99adb56763 ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
dm-flakey returns error on reads if no other argument is specified.
This commit simplifies associated logic while formalizing an
"error_reads" argument and an ERROR_READS flag.
If no argument is specified, set ERROR_READS flag so that it behaves
just like before this commit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Don't return a trailing space in the output of STATUSTYPE_TABLE.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This command will crash with NULL pointer dereference:
dmsetup create flakey --table \
"0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512"
Fix the crash by checking if arg_name is non-NULL before comparing it.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Remove function validate_ctr_auth() and replace this very small
function by its body.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Function validate_ctr_version() first parameter is a pointer to
a large structure, but only member hw_perf_event::config is used.
Supply this structure member value in the function invocation.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The CPU measurement facility counter information instruction qctri()
retrieves information about the available counter sets.
The information varies between machine generations, but is constant
when running on a particular machine.
For example the CPU measurement facility counter first and second
version numbers determine the amount of counters in a counter
set. This information never changes.
The counter sets are identical for all CPUs in the system. It does
not matter which CPU performs the instruction.
Authorization control of the CPU Measurement facility can only
be changed in the activation profile while the LPAR is not running.
Retrieve the CPU measurement counter information at device driver
initialization time and use its constant values.
Function validate_ctr_version() verifies if a user provided
CPU Measurement counter facility counter is valid and defined.
It now uses the newly introduced static CPU counter facility
information.
To avoid repeated recalculation of the counter set sizes (numbers of
counters per set), which never changes on a running machine,
calculate the counter set size once at device driver initialization
and store the result in an array. Functions cpum_cf_make_setsize()
and cpum_cf_read_setsize() are introduced.
Finally remove cpu_cf_events::info member and use the static CPU
counter facility information instead.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
After multiple attempts, this patchset is now based on the fact that the
64b kernel mapping was moved outside the linear mapping.
The first patch allows to build relocatable kernels but is not selected
by default. That patch is a requirement for KASLR.
The second and third patches take advantage of an already existing powerpc
script that checks relocations at compile-time, and uses it for riscv.
* b4-shazam-merge:
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
Link: https://lore.kernel.org/r/20230329045329.64565-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Review and rework all the zero length array occurrences
within structs to flexible array fields or comment if
not used at all. However, some struct fields are there
for documentation purpose or to have correct sizeof()
evaluation of a struct and thus should not get deleted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To circumvent an issue where placing the relocations inside the init
sections produces empty relocations, use --emit-relocs. But to avoid
carrying those relocations in vmlinux, use an intermediate
vmlinux.relocs file which is a copy of vmlinux *before* stripping its
relocations.
Suggested-by: Björn Töpel <bjorn@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329045329.64565-7-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Relocating kernel at runtime is done very early in the boot process, so
it is not convenient to check for relocations there and react in case a
relocation was not expected.
There exists a script in scripts/ that extracts the relocations from
vmlinux that is then used at postlink to check the relocations.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230329045329.64565-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Relocating kernel at runtime is done very early in the boot process, so
it is not convenient to check for relocations there and react in case a
relocation was not expected.
Powerpc architecture has a script that allows to check at compile time
for such unexpected relocations: extract the common logic to scripts/
so that other architectures can take advantage of it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20230329045329.64565-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This config allows to compile 64b kernel as PIE and to relocate it at
any virtual address at runtime: this paves the way to KASLR.
Runtime relocation is possible since relocation metadata are embedded into
the kernel.
Note that relocating at runtime introduces an overhead even if the
kernel is loaded at the same address it was linked at and that the compiler
options are those used in arm64 which uses the same RELA relocation
format.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329045329.64565-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts commit 33683cbf49 ("ASoC: fsl: remove unnecessary
dai_link->platform").
dai_link->platform is needed. The platform component is
"snd_dmaengine_pcm", which is registered from cpu driver,
If dai_link->platform is not assigned, then platform
component will not be probed, then there will be issue:
aplay: main:831: audio open error: Invalid argument
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1681900158-17428-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the unmapping of hugepage allocated umems so that they are
properly unmapped. The new test referred to in the fixes label,
introduced a test that allocated a umem that is not a multiple of a 2M
hugepage size. This is fine for mmap() that rounds the size up the
nearest multiple of 2M. But munmap() requires the size to be a
multiple of the hugepage size in order for it to unmap the region. The
current behaviour of not properly unmapping the umem, was discovered
when further additions of tests that require hugepages (unaligned mode
tests only) started failing as the system was running out of
hugepages.
Fixes: c0801598e5 ("selftests: xsk: Add test UNALIGNED_INV_DESC_4K1_FRAME_SIZE")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418143617.27762-1-magnus.karlsson@gmail.com
- Address two issues with the new GSS krb5 Kunit tests
-----BEGIN PGP SIGNATURE-----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=a/Wj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address two issues with the new GSS krb5 Kunit tests
* tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix failures of checksum Kunit tests
sunrpc: Fix RFC6803 encryption test
This is a regression fix for 80+80 and 160 MHz support bits being
cleared, therefore not adverised. Remove disable of 80+80 and 160 MHz
capability flags and assign valid center frequency 2 similar to
VHT80_80.
Fixes: 38dfe775d0 ("wifi: ath11k: push MU-MIMO params from hostapd to hardware")
Reported-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Robert Marko <robert.marko@sartura.hr> # IPQ8074 WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217299
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1681762947-13882-1-git-send-email-quic_msinada@quicinc.com
The port PLL selection needs to be up-to-date in the CRTC state of both
the primary and all secondary MST streams. The commit removing the
encoder update_prepare/complete hooks (see Fixes: below), stopped doing
this for secondary streams, fix this up.
Fixes: 0f752b2178 ("drm/i915: Remove the encoder update_prepare()/complete() hooks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
(cherry picked from commit 27ac123b45)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=u/0j
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes, some build fixes, a comment fix and a trivial cleanup"
* tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG
LoongArch: Replace hard-coded values in comments with VALEN
LoongArch: Clean up plat_swiotlb_setup() related code
LoongArch: Check unwind_error() in arch_stack_walk()
LoongArch: Adjust user_regset_copyin parameter to the correct offset
LoongArch: Adjust user_watch_state for explicit alignment
LoongArch: module: set section addresses to 0x0
LoongArch: Mark 3 symbol exports as non-GPL
LoongArch: Enable PG when wakeup from suspend
LoongArch: Fix _CONST64_(x) as unsigned
LoongArch: Fix build error if CONFIG_SUSPEND is not set
LoongArch: Fix probing of the CRC32 feature
LoongArch: Make WriteCombine configurable for ioremap()
Alexandre Ghiti <alexghiti@rivosinc.com> says:
As described in patch 2, our current kasan implementation is intricate,
so I tried to simplify the implementation and mimic what arm64/x86 are
doing.
In addition it fixes UEFI bootflow with a kasan kernel and kasan inline
instrumentation: all kasan configurations were tested on a large ubuntu
kernel with success with KASAN_KUNIT_TEST and KASAN_MODULE_TEST.
inline ubuntu config + uefi:
sv39: OK
sv48: OK
sv57: OK
outline ubuntu config + uefi:
sv39: OK
sv48: OK
sv57: OK
Actually 1 test always fails with KASAN_KUNIT_TEST that I have to check:
KASAN failure expected in "set_bit(nr, addr)", but none occurrred
Note that Palmer recently proposed to remove COMMAND_LINE_SIZE from the
userspace abi
https://lore.kernel.org/lkml/20221211061358.28035-1-palmer@rivosinc.com/T/
so that we can finally increase the command line to fit all kasan kernel
parameters.
All of this should hopefully fix the syzkaller riscv build that has been
failing for a few months now, any test is appreciated and if I can help
in any way, please ask.
* b4-shazam-merge:
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
Link: https://lore.kernel.org/r/20230203075232.274282-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If KASAN is enabled, VMAP_STACK depends on KASAN_VMALLOC so enable
KASAN_VMALLOC with KASAN so that we can enable VMAP_STACK by default.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-7-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The KASAN shadow region was moved next to the kernel mapping but the
ptdump code was not updated and it appears to break the dump of the kernel
page table, so fix this by moving the KASAN shadow region in ptdump.
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The EFI stub must not use any KASAN instrumented code as the kernel
proper did not initialize the thread pointer and the mapping for the
KASAN shadow region.
Avoid using the generic strcmp function, instead use the one in
drivers/firmware/efi/libstub/string.c.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The early virtual address should lie in the kernel address space for
inline kasan instrumentation to succeed, otherwise kasan tries to
dereference an address that does not exist in the address space (since
kasan only maps *kernel* address space, not the userspace).
Simply use the very first address of the kernel address space for the
early fdt mapping.
It allowed an Ubuntu kernel to boot successfully with inline
instrumentation.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Our previous kasan population implementation used to have the final kasan
shadow region mapped with kasan_early_shadow_page, because we did not clean
the early mapping and then we had to populate the kasan region "in-place"
which made the code cumbersome.
So now we clear the early mapping, establish a temporary mapping while we
populate the kasan shadow region with just the kernel regions that will
be used.
This new version uses the "generic" way of going through a page table
that may be folded at runtime (avoid the XXX_next macros).
It was tested with outline instrumentation on an Ubuntu kernel
configuration successfully.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is a preliminary work that allows to make the code more
understandable.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230203075232.274282-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While running traffics for a long time, randomly an RX descriptor
filled with value "0" from REO destination ring is received.
This descriptor which is invalid causes the wrong SKB (SKB stored in
the IDR lookup with buffer id "0") to be fetched which in turn
causes SKB memory corruption issue and the same leads to crash
after some time.
Changed the start id for idr allocation to "1" and the buffer id "0"
is reserved for error validation. Introduced Sanity check to validate
the descriptor, before processing the SKB.
Crash Signature :
Unable to handle kernel paging request at virtual address 3f004900
PC points to "b15_dma_inv_range+0x30/0x50"
LR points to "dma_cache_maint_page+0x8c/0x128".
The Backtrace obtained is as follows:
[<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128)
[<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc)
[<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k])
[<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k])
[<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci])
[<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8)
[<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280)
[<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280)
[<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4)
[<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4)
[<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90)
[<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403191533.28114-1-quic_nmaran@quicinc.com
ieee80211_tx_status() treats packets in 802.11 frame format and
tries to extract sta address from packet header. When tx encap
offload is enabled, this becomes invalid operation. Hence, switch
to using ieee80211_tx_status_ext() after filling in station
address for handling both 802.11 and 802.3 frames.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com
During reo command failure, the peer mac detail for which the reo
command was not successful is unknown. Hence, to improve the
debuggability, add the peer mac information in the failure cases
which would be useful during multi client cases.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403182420.23375-4-quic_hprem@quicinc.com
Prevent REO cmd failures causing double free by increasing REO cmd
ring size and moving REO status ring mask to IRQ group 3 from group
0 to separate from tx completion ring on IRQ group 0 which may delay
reo status processing.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403182420.23375-3-quic_hprem@quicinc.com
Peer rx_tid is locally copied thrice during peer_rx_tid_cleanup to
send REO_CMD_UPDATE_RX_QUEUE followed by REO_CMD_FLUSH_CACHE to flush
all aged REO descriptors from HW cache.
When sending REO_CMD_FLUSH_CACHE fails, we do dma unmap of already
mapped rx_tid->vaddr and free it. This is not checked during
reo_cmd_list_cleanup() and dp_reo_cmd_free() before trying to free and
unmap again.
Fix this by setting rx_tid->vaddr NULL in rx tid delete and also
wherever freeing it to check in reo_cmd_list_cleanup() and
reo_cmd_free() before trying to free again.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403182420.23375-2-quic_hprem@quicinc.com
