Commit graph

1,189,987 commits

Author SHA1 Message Date
Reinette Chatre
a0506b3b06 x86/sgx: Free up EPC pages directly to support large page ranges
The page reclaimer ensures availability of EPC pages across all
enclaves. In support of this it runs independently from the
individual enclaves in order to take locks from the different
enclaves as it writes pages to swap.

When needing to load a page from swap an EPC page needs to be
available for its contents to be loaded into. Loading an existing
enclave page from swap does not reclaim EPC pages directly if
none are available, instead the reclaimer is woken when the
available EPC pages are found to be below a watermark.

When iterating over a large number of pages in an oversubscribed
environment there is a race between the reclaimer woken up and
EPC pages reclaimed fast enough for the page operations to proceed.

Ensure there are EPC pages available before attempting to load
a page that may potentially be pulled from swap into an available
EPC page.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/a0d8f037c4a075d56bf79f432438412985f7ff7a.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:03 -07:00
Reinette Chatre
9849bb2715 x86/sgx: Support complete page removal
The SGX2 page removal flow was introduced in previous patch and is
as follows:
1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
   using the ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES introduced in
   previous patch.
2) Approve the page removal by running ENCLU[EACCEPT] from within
   the enclave.
3) Initiate actual page removal using the ioctl()
   SGX_IOC_ENCLAVE_REMOVE_PAGES introduced here.

Support the final step of the SGX2 page removal flow with ioctl()
SGX_IOC_ENCLAVE_REMOVE_PAGES. With this ioctl() the user specifies
a page range that should be removed. All pages in the provided
range should have the SGX_PAGE_TYPE_TRIM page type and the request
will fail with EPERM (Operation not permitted) if a page that does
not have the correct type is encountered. Page removal can fail
on any page within the provided range. Support partial success by
returning the number of pages that were successfully removed.

Since actual page removal will succeed even if ENCLU[EACCEPT] was not
run from within the enclave the ENCLU[EMODPR] instruction with RWX
permissions is used as a no-op mechanism to ensure ENCLU[EACCEPT] was
successfully run from within the enclave before the enclave page is
removed.

If the user omits running SGX_IOC_ENCLAVE_REMOVE_PAGES the pages will
still be removed when the enclave is unloaded.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/b75ee93e96774e38bb44a24b8e9bbfb67b08b51b.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:03 -07:00
Reinette Chatre
45d546b8c1 x86/sgx: Support modifying SGX page type
Every enclave contains one or more Thread Control Structures (TCS). The
TCS contains meta-data used by the hardware to save and restore thread
specific information when entering/exiting the enclave. With SGX1 an
enclave needs to be created with enough TCSs to support the largest
number of threads expecting to use the enclave and enough enclave pages
to meet all its anticipated memory demands. In SGX1 all pages remain in
the enclave until the enclave is unloaded.

SGX2 introduces a new function, ENCLS[EMODT], that is used to change
the type of an enclave page from a regular (SGX_PAGE_TYPE_REG) enclave
page to a TCS (SGX_PAGE_TYPE_TCS) page or change the type from a
regular (SGX_PAGE_TYPE_REG) or TCS (SGX_PAGE_TYPE_TCS)
page to a trimmed (SGX_PAGE_TYPE_TRIM) page (setting it up for later
removal).

With the existing support of dynamically adding regular enclave pages
to an initialized enclave and changing the page type to TCS it is
possible to dynamically increase the number of threads supported by an
enclave.

Changing the enclave page type to SGX_PAGE_TYPE_TRIM is the first step
of dynamically removing pages from an initialized enclave. The complete
page removal flow is:
1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
   using the SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl() introduced here.
2) Approve the page removal by running ENCLU[EACCEPT] from within
   the enclave.
3) Initiate actual page removal using the ioctl() introduced in the
   following patch.

Add ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES to support changing SGX
enclave page types within an initialized enclave. With
SGX_IOC_ENCLAVE_MODIFY_TYPES the user specifies a page range and the
enclave page type to be applied to all pages in the provided range.
The ioctl() itself can return an error code based on failures
encountered by the kernel. It is also possible for SGX specific
failures to be encountered.  Add a result output parameter to
communicate the SGX return code. It is possible for the enclave page
type change request to fail on any page within the provided range.
Support partial success by returning the number of pages that were
successfully changed.

After the page type is changed the page continues to be accessible
from the kernel perspective with page table entries and internal
state. The page may be moved to swap. Any access until ENCLU[EACCEPT]
will encounter a page fault with SGX flag set in error code.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Link: https://lkml.kernel.org/r/babe39318c5bf16fc65fbfb38896cdee72161575.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:03 -07:00
Reinette Chatre
7b013e723a x86/sgx: Tighten accessible memory range after enclave initialization
Before an enclave is initialized the enclave's memory range is unknown.
The enclave's memory range is learned at the time it is created via the
SGX_IOC_ENCLAVE_CREATE ioctl() where the provided memory range is
obtained from an earlier mmap() of /dev/sgx_enclave. After an enclave
is initialized its memory can be mapped into user space (mmap()) from
where it can be entered at its defined entry points.

With the enclave's memory range known after it is initialized there is
no reason why it should be possible to map memory outside this range.

Lock down access to the initialized enclave's memory range by denying
any attempt to map memory outside its memory range.

Locking down the memory range also makes adding pages to an initialized
enclave more efficient. Pages are added to an initialized enclave by
accessing memory that belongs to the enclave's memory range but not yet
backed by an enclave page. If it is possible for user space to map
memory that does not form part of the enclave then an access to this
memory would eventually fail. Failures range from a prompt general
protection fault if the access was an ENCLU[EACCEPT] from within the
enclave, or a page fault via the vDSO if it was another access from
within the enclave, or a SIGBUS (also resulting from a page fault) if
the access was from outside the enclave.

Disallowing invalid memory to be mapped in the first place avoids
preventable failures.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/6391460d75ae79cea2e81eef0f6ffc03c6e9cfe7.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:03 -07:00
Reinette Chatre
5a90d2c3f5 x86/sgx: Support adding of pages to an initialized enclave
With SGX1 an enclave needs to be created with its maximum memory demands
allocated. Pages cannot be added to an enclave after it is initialized.
SGX2 introduces a new function, ENCLS[EAUG], that can be used to add
pages to an initialized enclave. With SGX2 the enclave still needs to
set aside address space for its maximum memory demands during enclave
creation, but all pages need not be added before enclave initialization.
Pages can be added during enclave runtime.

Add support for dynamically adding pages to an initialized enclave,
architecturally limited to RW permission at creation but allowed to
obtain RWX permissions after trusted enclave runs EMODPE. Add pages
via the page fault handler at the time an enclave address without a
backing enclave page is accessed, potentially directly reclaiming
pages if no free pages are available.

The enclave is still required to run ENCLU[EACCEPT] on the page before
it can be used. A useful flow is for the enclave to run ENCLU[EACCEPT]
on an uninitialized address. This will trigger the page fault handler
that will add the enclave page and return execution to the enclave to
repeat the ENCLU[EACCEPT] instruction, this time successful.

If the enclave accesses an uninitialized address in another way, for
example by expanding the enclave stack to a page that has not yet been
added, then the page fault handler would add the page on the first
write but upon returning to the enclave the instruction that triggered
the page fault would be repeated and since ENCLU[EACCEPT] was not run
yet it would trigger a second page fault, this time with the SGX flag
set in the page fault error code. This can only be recovered by entering
the enclave again and directly running the ENCLU[EACCEPT] instruction on
the now initialized address.

Accessing an uninitialized address from outside the enclave also
triggers this flow but the page will remain inaccessible (access will
result in #PF) until accepted from within the enclave via
ENCLU[EACCEPT].

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Link: https://lkml.kernel.org/r/a254a58eabea053803277449b24b6e4963a3883b.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:03 -07:00
Reinette Chatre
ff08530a52 x86/sgx: Support restricting of enclave page permissions
In the initial (SGX1) version of SGX, pages in an enclave need to be
created with permissions that support all usages of the pages, from the
time the enclave is initialized until it is unloaded. For example,
pages used by a JIT compiler or when code needs to otherwise be
relocated need to always have RWX permissions.

SGX2 includes a new function ENCLS[EMODPR] that is run from the kernel
and can be used to restrict the EPCM permissions of regular enclave
pages within an initialized enclave.

Introduce ioctl() SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS to support
restricting EPCM permissions. With this ioctl() the user specifies
a page range and the EPCM permissions to be applied to all pages in
the provided range. ENCLS[EMODPR] is run to restrict the EPCM
permissions followed by the ENCLS[ETRACK] flow that will ensure
no cached linear-to-physical address mappings to the changed
pages remain.

It is possible for the permission change request to fail on any
page within the provided range, either with an error encountered
by the kernel or by the SGX hardware while running
ENCLS[EMODPR]. To support partial success the ioctl() returns an
error code based on failures encountered by the kernel as well
as two result output parameters: one for the number of pages
that were successfully changed and one for the SGX return code.

The page table entry permissions are not impacted by the EPCM
permission changes. VMAs and PTEs will continue to allow the
maximum vetted permissions determined at the time the pages
are added to the enclave. The SGX error code in a page fault
will indicate if it was an EPCM permission check that prevented
an access attempt.

No checking is done to ensure that the permissions are actually
being restricted. This is because the enclave may have relaxed
the EPCM permissions from within the enclave without the kernel
knowing. An attempt to relax permissions using this call will
be ignored by the hardware.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Link: https://lkml.kernel.org/r/082cee986f3c1a2f4fdbf49501d7a8c5a98446f8.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:03 -07:00
Reinette Chatre
a76e7f1f18 x86/sgx: Support VA page allocation without reclaiming
struct sgx_encl should be protected with the mutex
sgx_encl->lock. One exception is sgx_encl->page_cnt that
is incremented (in sgx_encl_grow()) when an enclave page
is added to the enclave. The reason the mutex is not held
is to allow the reclaimer to be called directly if there are
no EPC pages (in support of a new VA page) available at the time.

Incrementing sgx_encl->page_cnt without sgc_encl->lock held
is currently (before SGX2) safe from concurrent updates because
all paths in which sgx_encl_grow() is called occur before
enclave initialization and are protected with an atomic
operation on SGX_ENCL_IOCTL.

SGX2 includes support for dynamically adding pages after
enclave initialization where the protection of SGX_ENCL_IOCTL
is not available.

Make direct reclaim of EPC pages optional when new VA pages
are added to the enclave. Essentially the existing "reclaim"
flag used when regular EPC pages are added to an enclave
becomes available to the caller when used to allocate VA pages
instead of always being "true".

When adding pages without invoking the reclaimer it is possible
to do so with sgx_encl->lock held, gaining its protection against
concurrent updates to sgx_encl->page_cnt after enclave
initialization.

No functional change.

Reported-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/42c5934c229982ee67982bb97c6ab34bde758620.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Jarkko Sakkinen
8123073c43 x86/sgx: Export sgx_encl_page_alloc()
Move sgx_encl_page_alloc() to encl.c and export it so that it can be
used in the implementation for support of adding pages to initialized
enclaves, which requires to allocate new enclave pages.

Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/57ae71b4ea17998467670232e12d6617b95c6811.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
3a53514152 x86/sgx: Export sgx_encl_{grow,shrink}()
In order to use sgx_encl_{grow,shrink}() in the page augmentation code
located in encl.c, export these functions.

Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d51730acf54b6565710b2261b3099517b38c2ec4.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
8cb7b502f3 x86/sgx: Keep record of SGX page type
SGX2 functions are not allowed on all page types. For example,
ENCLS[EMODPR] is only allowed on regular SGX enclave pages and
ENCLS[EMODPT] is only allowed on TCS and regular pages. If these
functions are attempted on another type of page the hardware would
trigger a fault.

Keep a record of the SGX page type so that there is more
certainty whether an SGX2 instruction can succeed and faults
can be treated as real failures.

The page type is a property of struct sgx_encl_page
and thus does not cover the VA page type. VA pages are maintained
in separate structures and their type can be determined in
a different way. The SGX2 instructions needing the page type do not
operate on VA pages and this is thus not a scenario needing to
be covered at this time.

struct sgx_encl_page hosting this information is maintained for each
enclave page so the space consumed by the struct is important.
The existing sgx_encl_page->vm_max_prot_bits is already unsigned long
while only using three bits. Transition to a bitfield for the two
members to support the additional information without increasing
the space consumed by the struct.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/a0a6939eefe7ba26514f6c49723521cde372de64.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
dda03e2c33 x86/sgx: Create utility to validate user provided offset and length
User provided offset and length is validated when parsing the parameters
of the SGX_IOC_ENCLAVE_ADD_PAGES ioctl(). Extract this validation
(with consistent use of IS_ALIGNED) into a utility that can be used
by the SGX2 ioctl()s that will also provide these values.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/767147bc100047abed47fe27c592901adfbb93a2.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
c7c6a8a61b x86/sgx: Make sgx_ipi_cb() available internally
The ETRACK function followed by an IPI to all CPUs within an enclave
is a common pattern with more frequent use in support of SGX2.

Make the (empty) IPI callback function available internally in
preparation for usage by SGX2.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/1179ed4a9c3c1c2abf49d51bfcf2c30b493181cc.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
f89c2f9bf5 x86/sgx: Move PTE zap code to new sgx_zap_enclave_ptes()
The SGX reclaimer removes page table entries pointing to pages that are
moved to swap.

SGX2 enables changes to pages belonging to an initialized enclave, thus
enclave pages may have their permission or type changed while the page
is being accessed by an enclave. Supporting SGX2 requires page table
entries to be removed so that any cached mappings to changed pages
are removed. For example, with the ability to change enclave page types
a regular enclave page may be changed to a Thread Control Structure
(TCS) page that may not be accessed by an enclave.

Factor out the code removing page table entries to a separate function
sgx_zap_enclave_ptes(), fixing accuracy of comments in the process,
and make it available to the upcoming SGX2 code.

Place sgx_zap_enclave_ptes() with the rest of the enclave code in
encl.c interacting with the page table since this code is no longer
unique to the reclaimer.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/b010cdf01d7ce55dd0f00e883b7ccbd9db57160a.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
bdaa8799f6 x86/sgx: Rename sgx_encl_ewb_cpumask() as sgx_encl_cpumask()
sgx_encl_ewb_cpumask() is no longer unique to the reclaimer where it
is used during the EWB ENCLS leaf function when EPC pages are written
out to main memory and sgx_encl_ewb_cpumask() is used to learn which
CPUs might have executed the enclave to ensure that TLBs are cleared.

Upcoming SGX2 enabling will use sgx_encl_ewb_cpumask() during the
EMODPR and EMODT ENCLS leaf functions that make changes to enclave
pages. The function is needed for the same reason it is used now: to
learn which CPUs might have executed the enclave to ensure that TLBs
no longer point to the changed pages.

Rename sgx_encl_ewb_cpumask() to sgx_encl_cpumask() to reflect the
broader usage.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d4d08c449450a13d8dd3bb6c2b1af03895586d4f.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:02 -07:00
Reinette Chatre
7f391752d4 x86/sgx: Export sgx_encl_ewb_cpumask()
Using sgx_encl_ewb_cpumask() to learn which CPUs might have executed
an enclave is useful to ensure that TLBs are cleared when changes are
made to enclave pages.

sgx_encl_ewb_cpumask() is used within the reclaimer when an enclave
page is evicted. The upcoming SGX2 support enables changes to be
made to enclave pages and will require TLBs to not refer to the
changed pages and thus will be needing sgx_encl_ewb_cpumask().

Relocate sgx_encl_ewb_cpumask() to be with the rest of the enclave
code in encl.c now that it is no longer unique to the reclaimer.

Take care to ensure that any future usage maintains the
current context requirement that ETRACK has been called first.
Expand the existing comments to highlight this while moving them
to a more prominent location before the function.

No functional change.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/05b60747fd45130cf9fc6edb1c373a69a18a22c5.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:01 -07:00
Reinette Chatre
b3fb517dc6 x86/sgx: Support loading enclave page without VMA permissions check
sgx_encl_load_page() is used to find and load an enclave page into
enclave (EPC) memory, potentially loading it from the backing storage.
Both usages of sgx_encl_load_page() are during an access to the
enclave page from a VMA and thus the permissions of the VMA are
considered before the enclave page is loaded.

SGX2 functions operating on enclave pages belonging to an initialized
enclave requiring the page to be in EPC. It is thus required to
support loading enclave pages into the EPC independent from a VMA.

Split the current sgx_encl_load_page() to support the two usages:
A new call, sgx_encl_load_page_in_vma(), behaves exactly like the
current sgx_encl_load_page() that takes VMA permissions into account,
while sgx_encl_load_page() just loads an enclave page into EPC.

VMA, PTE, and EPCM permissions continue to dictate whether
the pages can be accessed from within an enclave.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d4393513c1f18987c14a490bcf133bfb71a5dc43.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:01 -07:00
Reinette Chatre
61416b294a x86/sgx: Add wrapper for SGX2 EAUG function
Add a wrapper for the EAUG ENCLS leaf function used to
add a page to an initialized enclave.

EAUG:
1) Stores all properties of the new enclave page in the SGX
   hardware's Enclave Page Cache Map (EPCM).
2) Sets the PENDING bit in the EPCM entry of the enclave page.
   This bit is cleared by the enclave by invoking ENCLU leaf
   function EACCEPT or EACCEPTCOPY.

Access from within the enclave to the new enclave page is not
possible until the PENDING bit is cleared.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/97a46754fe4764e908651df63694fb760f783d6e.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:01 -07:00
Reinette Chatre
09b38d0b41 x86/sgx: Add wrapper for SGX2 EMODT function
Add a wrapper for the EMODT ENCLS leaf function used to
change the type of an enclave page as maintained in the
SGX hardware's Enclave Page Cache Map (EPCM).

EMODT:
1) Updates the EPCM page type of the enclave page.
2) Sets the MODIFIED bit in the EPCM entry of the enclave page.
   This bit is reset by the enclave by invoking ENCLU leaf
   function EACCEPT or EACCEPTCOPY.

Access from within the enclave to the enclave page is not possible
while the MODIFIED bit is set.

After changing the enclave page type by issuing EMODT the kernel
needs to collaborate with the hardware to ensure that no logical
processor continues to hold a reference to the changed page. This
is required to ensure no required security checks are circumvented
and is required for the enclave's EACCEPT/EACCEPTCOPY to succeed.
Ensuring that no references to the changed page remain is
accomplished with the ETRACK flow.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/dba63a8c0db1d510b940beee1ba2a8207efeb1f1.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:01 -07:00
Reinette Chatre
0fb2126db8 x86/sgx: Add wrapper for SGX2 EMODPR function
Add a wrapper for the EMODPR ENCLS leaf function used to
restrict enclave page permissions as maintained in the
SGX hardware's Enclave Page Cache Map (EPCM).

EMODPR:
1) Updates the EPCM permissions of an enclave page by treating
   the new permissions as a mask. Supplying a value that attempts
   to relax EPCM permissions has no effect on EPCM permissions
   (PR bit, see below, is changed).
2) Sets the PR bit in the EPCM entry of the enclave page to
   indicate that permission restriction is in progress. The bit
   is reset by the enclave by invoking ENCLU leaf function
   EACCEPT or EACCEPTCOPY.

The enclave may access the page throughout the entire process
if conforming to the EPCM permissions for the enclave page.

After performing the permission restriction by issuing EMODPR
the kernel needs to collaborate with the hardware to ensure that
all logical processors sees the new restricted permissions. This
is required for the enclave's EACCEPT/EACCEPTCOPY to succeed and
is accomplished with the ETRACK flow.

Expand enum sgx_return_code with the possible EMODPR return
values.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/d15e7a769e13e4ca671fa2d0a0d3e3aec5aedbd4.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:01 -07:00
Reinette Chatre
4c3f73584c x86/sgx: Add short descriptions to ENCLS wrappers
The SGX ENCLS instruction uses EAX to specify an SGX function and
may require additional registers, depending on the SGX function.
ENCLS invokes the specified privileged SGX function for managing
and debugging enclaves. Macros are used to wrap the ENCLS
functionality and several wrappers are used to wrap the macros to
make the different SGX functions accessible in the code.

The wrappers of the supported SGX functions are cryptic. Add short
descriptions of each as a comment.

Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/5e78a1126711cbd692d5b8132e0683873398f69e.1652137848.git.reinette.chatre@intel.com
2022-07-07 10:13:01 -07:00
Linus Torvalds
ef4ab3ba4e Networking fixes for 5.19-rc6, including fixes from bpf, netfilter,
can, bluetooth
 
 Current release - regressions:
   - bluetooth: fix deadlock on hci_power_on_sync.
 
 Previous releases - regressions:
   - sched: act_police: allow 'continue' action offload
 
   - eth: usbnet: fix memory leak in error case
 
   - eth: ibmvnic: properly dispose of all skbs during a failover.
 
 Previous releases - always broken:
   - bpf:
     - fix insufficient bounds propagation from adjust_scalar_min_max_vals
     - clear page contiguity bit when unmapping pool
 
   - netfilter: nft_set_pipapo: release elements in clone from abort path
 
   - mptcp: netlink: issue MP_PRIO signals from userspace PMs
 
   - can:
     - rcar_canfd: fix data transmission failed on R-Car V3U
     - gs_usb: gs_usb_open/close(): fix memory leak
 
 Misc:
   - add Wenjia as SMC maintainer
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmLGqsUSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkz8kQAINYcsrZ7sBKAVeGNq/PzPXpIuIvxLVL
 XP+9nqs+8JiBG0xPQNfV/AlRWilWckMzQf1F8SfuDwg5ahz0HSN9XJVf+v9p9uYs
 GthlBgLCH+Kp06831wVC/j8GBcQm2cneOaaZN4udLRORztbOGkn5xFhJOu3lezap
 IqvAIlyQFCi6uan+iGUXEwh/hEPgH2imOM+1ICao/fp9m7cGkBQKyqAY/ztxgby4
 H1DdSsPSZ7e1wjAczdr0oGPzEE5OMxdJUk9yigSNnKwGavoGtizRefStWD+yEUBj
 XzeWwlAO/otJsklp9cesRYPKiiIx1bmVG14ZTSRpzobg3FEKjP0H4iBgtO67972W
 RJcolGUtxPd6lgrP5ZxzcStS2v44GeuKkvhKbMMsEEvEDg/we9vBZc6AX6Xs8yr3
 fBBkSQnzCJF7CtHxSf7n/6RM4VfaHMbSBb2u23DVsf9N0rU2atNPRvwT2koe0SyO
 8lSECzUdjRE2f48PIk0/+nl4zFmAjDBMI1W8+YeeBrjcYQmBtkmHn9eMjAWu5E1f
 1pGqmtc3N/LqI4f6l9/oAE2IuiIvdTyo53/Zdqm5SLmIDttVzxAeHrEAaOCwoiWV
 QXxpvwG3nYd1mE0MfBQLcjD0tpw7ZK3oG/IqDTSiLwGaRXVPxqqQ6jdSriWFUzGm
 3zl8fnai73hd
 =x7Dr
 -----END PGP SIGNATURE-----

Merge tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, netfilter, can, and bluetooth.

  Current release - regressions:

   - bluetooth: fix deadlock on hci_power_on_sync

  Previous releases - regressions:

   - sched: act_police: allow 'continue' action offload

   - eth: usbnet: fix memory leak in error case

   - eth: ibmvnic: properly dispose of all skbs during a failover

  Previous releases - always broken:

   - bpf:
       - fix insufficient bounds propagation from
         adjust_scalar_min_max_vals
       - clear page contiguity bit when unmapping pool

   - netfilter: nft_set_pipapo: release elements in clone from
     abort path

   - mptcp: netlink: issue MP_PRIO signals from userspace PMs

   - can:
       - rcar_canfd: fix data transmission failed on R-Car V3U
       - gs_usb: gs_usb_open/close(): fix memory leak

  Misc:

   - add Wenjia as SMC maintainer"

* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  wireguard: Kconfig: select CRYPTO_CHACHA_S390
  crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
  wireguard: selftests: use microvm on x86
  wireguard: selftests: always call kernel makefile
  wireguard: selftests: use virt machine on m68k
  wireguard: selftests: set fake real time in init
  r8169: fix accessing unset transport header
  net: rose: fix UAF bug caused by rose_t0timer_expiry
  usbnet: fix memory leak in error case
  Revert "tls: rx: move counting TlsDecryptErrors for sync"
  mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
  mptcp: fix local endpoint accounting
  selftests: mptcp: userspace PM support for MP_PRIO signals
  mptcp: netlink: issue MP_PRIO signals from userspace PMs
  mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
  mptcp: Avoid acquiring PM lock for subflow priority changes
  mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
  net/mlx5e: Fix matchall police parameters validation
  net/sched: act_police: allow 'continue' action offload
  net: lan966x: hardcode the number of external ports
  ...
2022-07-07 10:08:20 -07:00
Linus Torvalds
651a853657 Pin control fixes for the v5.19 kernel series:
- Tag Intel pin control as supported in MAINTAINERS
 - Fix a NULL pointer exception in the Aspeed driver
 - Correct some NAND functions in the Sunxi A83T driver
 - Use the right offset for some Sunxi pins
 - Fix a zero base offset in the Freescale (NXP) i.MX93
 - Fix the IRQ support in the STM32 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmLGoQgACgkQQRCzN7AZ
 XXP8PQ//RMTSwEqwV+ODZC/NtbnJJ63mKmR0N00EvLpfWpdpSMpi4NUPd8j+p8ms
 KAOG5+kh9bcciBJO4yqdIBGda6wZ//E04RfMgsTJB6xs2ADNsEVX6FMZwZ4nSSO3
 uHCjPhSLMzU3t/ZgbPIS9/g29vd7ulepnfGI8JqEp2uqdBR97WXchW3FglOWvObs
 OQIH1RhiwYdlL8kJotEEL/zzY8ZcS908MyiOHvvq+x+gs66UU7XKcfq9kOOs30lL
 skBbfedTMfnsGjRRXvzwbXq0S6hcperx5mJTOPBILzzjTFdUwJJ5qLWzpzSKLGoF
 fmnxJ2uhCjJadD+NzFglD3/os5sXZ3VjWnnS8jrUMuzTByVbmFRUItZvnozgRdWH
 knJdoMy05cfja/PpKZhP+pKQiOsKtdFJbe6gjR9pK5/m/gSbFicJJfocjHND0Tks
 LdCCz1zw/8kt0ehN9aZQIghvLrRAEmWPPvmAJBuN9ZiV4StjlC0EabhAl327r1Od
 jH8wTOShS7465sZriUDGT5GyqDcM/koMPWbkCCsZtJ2au02Ve3sPU0SFjewULpD0
 Sgsicu4YBKyiyVzU4PtUZ5Wb/rgyW2phmOoqfrKPWJU8qlrpt26GEY75aWWnVHse
 /N8aa67vtdobLq34VTGI6+Yzt0apQxk4tR7NuXZi6Fs/jdoqqZ8=
 =JyfH
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Tag Intel pin control as supported in MAINTAINERS

 - Fix a NULL pointer exception in the Aspeed driver

 - Correct some NAND functions in the Sunxi A83T driver

 - Use the right offset for some Sunxi pins

 - Fix a zero base offset in the Freescale (NXP) i.MX93

 - Fix the IRQ support in the STM32 driver

* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: fix optional IRQ support to gpios
  pinctrl: imx: Add the zero base flag for imx93
  pinctrl: sunxi: sunxi_pconf_set: use correct offset
  pinctrl: sunxi: a83t: Fix NAND function name for some pins
  pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
  MAINTAINERS: Update Intel pin control to Supported
2022-07-07 10:02:38 -07:00
Rob Clark
92ef86ab51 drm/msm/mdp5: Fix global state lock backoff
We need to grab the lock after the early return for !hwpipe case.
Otherwise, we could have hit contention yet still returned 0.

Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged
in CI:

   WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154
   Modules linked in:
   CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G        W         5.19.0-rc2-15930-g875cc8bc536a #1
   Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
   pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
   pc : drm_modeset_lock+0xf8/0x154
   lr : drm_atomic_get_private_obj_state+0x84/0x170
   sp : ffff80000cfab6a0
   x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00
   x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58
   x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001
   x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038
   x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0
   x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
   x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610
   x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000
   x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029
   x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58
   Call trace:
    drm_modeset_lock+0xf8/0x154
    drm_atomic_get_private_obj_state+0x84/0x170
    mdp5_get_global_state+0x54/0x6c
    mdp5_pipe_release+0x2c/0xd4
    mdp5_plane_atomic_check+0x2ec/0x414
    drm_atomic_helper_check_planes+0xd8/0x210
    drm_atomic_helper_check+0x54/0xb0
    ...
   ---[ end trace 0000000000000000 ]---
   drm_modeset_lock attempting to lock a contended lock without backoff:
      drm_modeset_lock+0x148/0x154
      mdp5_get_global_state+0x30/0x6c
      mdp5_pipe_release+0x2c/0xd4
      mdp5_plane_atomic_check+0x290/0x414
      drm_atomic_helper_check_planes+0xd8/0x210
      drm_atomic_helper_check+0x54/0xb0
      drm_atomic_check_only+0x4b0/0x8f4
      drm_atomic_commit+0x68/0xe0

Fixes: d59be579fa ("drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/492701/
Link: https://lore.kernel.org/r/20220707162040.1594855-1-robdclark@gmail.com
2022-07-07 10:02:09 -07:00
Deming Wang
ff4f65e4dd vfio/spapr_tce: Remove the unused parameters container
The parameter of container has been unused for tce_iommu_unuse_page.
So, we should delete it.

Signed-off-by: Deming Wang <wangdeming@inspur.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Link: https://lore.kernel.org/r/20220702064613.5293-1-wangdeming@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-07 10:58:19 -06:00
Linus Torvalds
a382f8fee4 signal handling: don't use BUG_ON() for debugging
These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running.  Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-07 09:53:43 -07:00
Lukas Bulwahn
9de76f41ea x86/mm: Refer to the intended config STRICT_DEVMEM in a comment
Commit a4866aa812 ("mm: Tighten x86 /dev/mem with zeroing reads") adds a
comment to the function devmem_is_allowed() referring to a non-existing
config STRICT_IOMEM, whereas the comment very likely intended to refer to
the config STRICT_DEVMEM, as the commit adds some behavior for the config
STRICT_DEVMEM.

Most of the initial analysis was actually done by Dave Hansen in the
email thread below (see Link).

Refer to the intended and existing config STRICT_DEVMEM.

Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/f9074e8d-9314-9d7d-7bf5-5b5538c8be8d@intel.com/
Link: https://lkml.kernel.org/r/20220707115442.21107-1-lukas.bulwahn@gmail.com
2022-07-07 09:51:36 -07:00
Kai-Heng Feng
68c1b3dd5c iio: light: cm32181: Add PM support
The read on in_illuminance_input keeps at 0 after system sleep.

So add proper suspend and resume callback to make the sensor keep
working after system sleep.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220707000151.33381-1-kai.heng.feng@canonical.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-07 17:50:04 +01:00
Lukas Bulwahn
7b86d50e74 MAINTAINERS: Rectify entry for NVIDIA TEGRA DRM and VIDEO DRIVER
Commit fd27de58b0ad ("dt-bindings: display: tegra: Convert to json-schema")
converts nvidia,tegra20-host1x.txt to yaml, but missed to adjust its
references in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair these file references in NVIDIA TEGRA DRM and VIDEO DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-07 18:30:00 +02:00
Thierry Reding
fe8b45aa61 dt-bindings: display: tegra: Convert to json-schema
Convert the Tegra host1x controller bindings from the free-form text
format to json-schema.

This also adds the missing display-hub DT bindings that were not
previously documented.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-07 18:30:00 +02:00
Robin Murphy
4136ce90f0 ARM/dma-mapping: merge IOMMU ops
The dma_sync_* operations are now the only difference between the
coherent and non-coherent IOMMU ops. Some minor tweaks to make those
safe for coherent devices with minimal overhead, and we can condense
down to a single set of DMA ops.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:58 +02:00
Robin Murphy
d563bccfa3 ARM/dma-mapping: consolidate IOMMU ops callbacks
Merge the coherent and non-coherent callbacks down to a single
implementation each, relying on the generic dev->dma_coherent
flag at the points where the difference matters.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:58 +02:00
Robin Murphy
42998ef08a ARM/dma-mapping: drop .dma_supported for IOMMU ops
When an IOMMU is present, we trust that it should be capable
of remapping any physical memory, and since the device masks
represent the input (virtual) addresses to the IOMMU it makes
no sense to validate them against physical PFNs anyway.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:57 +02:00
Christoph Hellwig
ae626eb973 ARM/dma-mapping: use dma-direct unconditionally
Use dma-direct unconditionally on arm.  It has already been used for
some time for LPAE and nommu configurations.

This mostly changes the streaming mapping implementation and the (simple)
coherent allocator for device that are DMA coherent.  The existing
complex allocator for uncached mappings for non-coherent devices is still
used as is using the arch_dma_alloc/arch_dma_free hooks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andre Przywara <andre.przywara@arm.com> [highbank]
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:57 +02:00
Christoph Hellwig
af6f23b88e ARM/dma-mapping: use the generic versions of dma_to_phys/phys_to_dma by default
Only the footbridge platforms provide their own DMA address translation
helpers, so switch to the generic version for all other platforms, and
consolidate the footbridge implementation to remove two levels of
indirection.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:57 +02:00
Christoph Hellwig
f9774cfd50 ARM/dma-mapping: use dma_to_phys/phys_to_dma in the dma-mapping code
Use the helpers as expected by the dma-direct code in the old arm
dma-mapping code to ease a gradual switch to the common DMA code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:57 +02:00
Christoph Hellwig
d6e2e92597 ARM/dma-mapping: remove the unused virt_to_dma helper
virt_to_dma was only used by the now removed dmabounce code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:56 +02:00
Christoph Hellwig
5ed390e5a9 ARM/dma-mapping: mark various dma-mapping routines static in dma-mapping.c
With the dmabounce removal these aren't used outside of dma-mapping.c,
so mark them static.  Move the dma_map_ops declarations down a bit
to avoid lots of forward declarations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07 18:18:56 +02:00
Christoph Hellwig
e3217540c2 ARM/dma-mapping: remove dmabounce
Remove the now unused dmabounce code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-07-07 18:18:56 +02:00
Arnd Bergmann
9ba26f5cec ARM: sa1100/assabet: move dmabounce hack to ohci driver
The sa1111 platform is one of the two remaining users of the old Arm
specific "dmabounce" code, which is an earlier implementation of the
generic swiotlb.

Linus Walleij submitted a patch that removes dmabounce support from
the ixp4xx, and I had a look at the other user, which is the sa1111
companion chip.

Looking at how dmabounce is used, I could narrow it down to one driver
one three machines:

 - dmabounce is only initialized on assabet/neponset, jornada720 and
   badge4, which are the platforms that have an sa1111 and support
   DMA on it.

 - All three of these suffer from "erratum #7" that requires only
   doing DMA to half the memory sections based on one of the address
   lines, in addition, the neponset also can't DMA to the RAM that
   is connected to sa1111 itself.

 - the pxa lubbock machine also has sa1111, but does not support DMA
   on it and does not set dmabounce.

 - only the OHCI and audio devices on sa1111 support DMA, but as
   there is no audio driver for this hardware, only OHCI remains.

In the OHCI code, I noticed that two other platforms already have
a local bounce buffer support in the form of the "local_mem"
allocator. Specifically, TMIO and SM501 use this on a few other ARM
boards with 16KB or 128KB of local SRAM that can be accessed from the
OHCI and from the CPU.

While this is not the same problem as on sa1111, I could not find a
reason why we can't re-use the existing implementation but replace the
physical SRAM address mapping with a locally allocated DMA buffer.

There are two main downsides:

 - rather than using a dynamically sized pool, this buffer needs
   to be allocated at probe time using a fixed size. Without
   having any idea of what it should be, I picked a size of
   64KB, which is between what the other two OHCI front-ends use
   in their SRAM. If anyone has a better idea what that size
   is reasonable, this can be trivially changed.

 - Previously, only USB transfers to unaddressable memory needed
   to go through the bounce buffer, now all of them do, which may
   impact runtime performance for USB endpoints that do a lot of
   transfers.

On the upside, the local_mem support uses write-combining buffers,
which should be a bit faster for transfers to the device compared to
normal uncached coherent memory as used in dmabounce.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-07 18:18:47 +02:00
Peter Ujfalusi
fc976f5629
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).

The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.

Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:40 +01:00
Peter Ujfalusi
219af251bd
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.

Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:39 +01:00
Oder Chiou
051dade346
ASoC: rt5640: Fix the wrong state of JD1 and JD2
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is
power on in the HDA JD using.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:38 +01:00
Brent Lu
c7dab6745f
ASoC: Intel: sof_rt5682: fix out-of-bounds array access
Starting from ADL platform we have four HDMI PCM devices which exceeds
the size of sof_hdmi array. Since each sof_hdmi_pcm structure
represents one HDMI PCM device, we remove the sof_hdmi array and add a
new member hdmi_jack to the sof_hdmi_pcm structure to fix the
out-of-bounds problem.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220701141517.264070-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:37 +01:00
Jianglei Nie
df5b4aca72
ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()
q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph
with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph
is not released, which will lead to a memory leak.

We can release the graph->graph with kfree() when idr_alloc() fails to
fix the memory leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629182520.2164409-1-niejianglei2021@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:36 +01:00
Hector Martin
1c4f29ec87
ASoC: tas2764: Fix amp gain register offset & default
The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.

Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:35 +01:00
Hector Martin
3e99e5697e
ASoC: tas2764: Correct playback volume range
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.

Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:34 +01:00
Martin Povišer
d1a10f1b48
ASoC: tas2764: Fix and extend FSYNC polarity handling
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!

Also add support for explicit polarity inversion.

Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:33 +01:00
Martin Povišer
cd10bb89b0
ASoC: tas2764: Add post reset delays
Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f314520 ("ASoC: tas2770: Insert post reset delay").

Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:32 +01:00
Bryan O'Donoghue
94c65dffd4
ASoC: dt-bindings: Fix description for msm8916
For the existing msm8916 bindings the minimum reg/reg-names is 1 not 2.
Similarly the minimum interrupt/interrupt-names is 1 not 2.

Fixes: f3fc4fbfa2 ("ASoC: dt-bindings: Add SC7280 lpass cpu bindings")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629114012.3282945-1-bryan.odonoghue@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:30 +01:00
Marek Vasut
0735e400fa
ASoC: doc: Capitalize RESET line name
Make sure all AC97 interface lines are spelled in capitals,
to avoid confusing readers about where the 5th line is.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165840.152235-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-07 17:16:30 +01:00