Commit graph

1,189,987 commits

Author SHA1 Message Date
Kuninori Morimoto
1929683e5b dt-bindings: pinctrl: renesas,pfc: Document r8a779g0 support
Document Pin Function Controller (PFC) support for the Renesas R-Car V4H
(R8A779G0) SoC.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjlty13.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05 09:12:36 +02:00
Phil Edworthy
92a9b82525 pinctrl: renesas: Add RZ/V2M pin and gpio controller driver
Add support for pin and gpio controller driver for RZ/V2M SoC.
Based on the RZ/G2L driver.

Note that the DETDO and DETMS dedicated pins are currently not
documented in the HW manual as to which pin group they are in.
HW team has since said that the output level of 1.8V I/O group 4
(for MD0-7, and debugger) is the same as the 1.8V I/O group 3.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220624084833.22605-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05 09:12:36 +02:00
Johan Hovold
fe841d5ba7 phy: qcom-qmp: clean up hex defines
Use lower case hex consistently for define values.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220609120338.4080-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:42:32 +05:30
Johan Hovold
b46ae21d0a phy: qcom-qmp: clean up define alignment
Clean up the QMP defines by removing some stray white space and making
sure values are aligned.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220609120338.4080-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:42:32 +05:30
Johan Hovold
74acf0ee6e phy: qcom-qmp: clean up v4 and v5 define order
Clean up the QMP v4 and v5 defines by moving a few entries that were out
of order.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220609120338.4080-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:42:32 +05:30
Geert Uytterhoeven
3896b8f092 arm64: dts: renesas: spider-cpu: Fix scif0/scif3 sort order
The scif0 nodes were accidentally inserted after the scif3 nodes,
breaking alphabetical sort order.

Fixes: 1614c8624a ("arm64: dts: renesas: spider-cpu: Enable SCIF0 on second connector")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2fe0e782351c202ed009dcd658f4bceec8f3a56d.1656951240.git.geert+renesas@glider.be
2022-07-05 09:10:18 +02:00
Liang He
75a185fb92 ARM: shmobile: rcar-gen2: Increase refcount for new reference
In rcar_gen2_regulator_quirk(), for_each_matching_node_and_match() will
automatically increase and decrease the refcount.  However, we should
call of_node_get() for the new reference created in 'quirk->np'.
Besides, we also should call of_node_put() before the 'quirk' being
freed.

Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220701121804.234223-1-windhl@126.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05 09:08:35 +02:00
Johan Hovold
5d5b7d509f phy: qcom-qmp-usb: clean up pipe clock handling
Clean up the pipe clock handling by using dev_err_probe() to handle
probe deferral and dropping the obsolete comment that claimed that the
pipe clock was optional for some other PHY types.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:33:26 +05:30
Johan Hovold
36db6ce1e4 phy: qcom-qmp-pcie-msm8996: drop obsolete pipe clock type check
Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:33:26 +05:30
Johan Hovold
8f662cd9f6 phy: qcom-qmp-pcie: drop obsolete pipe clock type check
Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:33:25 +05:30
Markus Schneider-Pargmann
6a23afad44 phy: phy-mtk-dp: Add driver for DP phy
This is a new driver that supports the integrated DisplayPort phy for
mediatek SoCs, especially the mt8195. The phy is integrated into the
DisplayPort controller and will be created by the mtk-dp driver. This
driver expects a struct regmap to be able to work on the same registers
as the DisplayPort controller. It sets the device data to be the struct
phy so that the DisplayPort controller can easily work with it.

The driver does not have any devicetree bindings because the datasheet
does not list the controller and the phy as distinct units.

The interaction with the controller can be covered by the configure
callback of the phy framework and its displayport parameters.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
[Bo-Chen: Modify reviewers' comments.]
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220624062725.4095-1-rex-bc.chen@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:28:09 +05:30
Rahul T R
f6723b8495 phy: cdns-dphy: Add support for DPHY TX on J721e
Add support new compatible for dphy-tx on j721e
and implement dphy ops required.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220623125433.18467-4-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:23:41 +05:30
Rahul T R
efcd5f5268 phy: cdns-dphy: Add band config for dphy tx
Add support for band ctrl config for dphy tx.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220623125433.18467-3-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:23:41 +05:30
Rahul T R
79446a2d2b phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e
Add compatible to support dphy tx on j721e

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220623125433.18467-2-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:23:41 +05:30
Peter Geis
b113e55913 phy: rockchip-inno-usb2: Prevent incorrect error on probe
If a phy supply is designated but isn't available at probe time, an
EPROBE_DEFER is returned. Use dev_err_probe to prevent this from
incorrectly printing during boot.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220625212711.558495-1-pgwipeout@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:03:21 +05:30
Jiang Jian
f49f2ece44 phy: dphy: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped

file: ./drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
line: 139
* when in RxULPS check state, after the the logic enable the analog,
changed to
* when in RxULPS check state, after the logic enable the analog,

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220621120015.113682-1-jiangjian@cdjrlc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 12:02:03 +05:30
Vidya Sagar
de60266825 phy: tegra: Add PCIe PIPE2UPHY support for Tegra234
Synopsys DesignWare core based PCIe controllers in Tegra234 SoC
interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U)
module. For each PCIe lane of a controller, there is a P2U unit
instantiated at hardware level. This driver provides support for the
programming required for each P2U that is going to be used for a PCIe
controller.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://lore.kernel.org/r/20220629060435.25297-9-vidyas@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 11:44:35 +05:30
Vidya Sagar
93134b0a4b dt-bindings: PHY: P2U: Add support for Tegra234 P2U block
Add support for Tegra234 P2U (PIPE to UPHY) module block which is a glue
module instantiated once for each PCIe lane between Synopsys DesignWare
core based PCIe IP and Universal PHY block.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220629060435.25297-2-vidyas@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 11:44:35 +05:30
Jianjun Wang
e4e46bc71c phy: mediatek: Add PCIe PHY driver
Add PCIe GEN3 PHY driver support on MediaTek chipsets.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioachino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617070246.20142-3-jianjun.wang@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 10:58:38 +05:30
Jianjun Wang
3a8802528d dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
Add YAML schema documentation for PCIe PHY on MediaTek chipsets.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617070246.20142-2-jianjun.wang@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 10:58:38 +05:30
Andy Shevchenko
d4a0a189b7 phy: ti: tusb1210: Don't check for write errors when powering on
On some platforms, like Intel Merrifield, the writing values during power on
may timeout:

   tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80
   phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110
   dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core
   dwc3: probe of dwc3.0.auto failed with error -110

which effectively fails the probe of the USB controller.
Drop the check as it was before the culprit commit (see Fixes tag).

Fixes: 09a3512681 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20220613160848.82746-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05 10:57:32 +05:30
Jakub Kicinski
7e8c182c36 linux-can-fixes-for-5.19-20220704
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLCxswTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCtfkuQ2KDTXR27B/oDW8Z5VKdextQ5vrBmZM0Qo2FhY9Mj
 fvK+6wzjYYlIXwXonc420CcRldEwlIgGrr41jr27gd04MTz82v12FQh/4je08wlJ
 WZ/Vhn4AX7HSnNysEOakpEr/LKlm19vWsq0Z9KJpt9JGYKNxzJirvGHYNUop4erC
 wXEHm31qRnll06I/38FMVUhSiY0K2ZfJRtWX0zopH3Jj7mwcDT8UaGXApEkhUvdS
 7JRLsTmMGwAUsYuaoYl+VR186avBpvLHgkYTbZKBvQASd4DZY4LSqBJTpIcbB621
 UK8bKIKmhSWOSyU/gnOjD86sacDcyvuKRuLUxYFuGKPyvtuiTYcXRVp9
 =Qgal
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
can 2022-07-04

The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and
converts a costly synchronize_rcu() to call_rcu() to fix a performance
regression.

Srinivas Neeli's patch for the xilinx_can driver drops the brp limit
down to 1, as only the pre-production silicon have an issue with a brp
of 1.

The next patch is by Duy Nguyen and fixes the data transmission on
R-Car V3U SoCs in the rcar_canfd driver.

Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver.

Liang He's patch removes an extra of_node_get() in the grcan driver.

The next 2 patches are by me, target the m_can driver and fix the
timestamp handling used for peripheral devices like the tcan4x5x.

Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and
fixes CAN clock and bit timing related issues.

The remaining 5 patches target the mcp251xfd driver. Thomas Kopp
contributes 2 patches to improve the workaround for broken CRC when
reading the TBC register. 3 patches by me add a missing
hrtimer_cancel() during the ndo_stop() callback, and fix the reading
of the Device ID register.

* tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion
  can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id
  can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd
  can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
  can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
  can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
  can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits
  can: m_can: m_can_chip_config(): actually enable internal timestamping
  can: grcan: grcan_probe(): remove extra of_node_get()
  can: gs_usb: gs_usb_open/close(): fix memory leak
  can: rcar_canfd: Fix data transmission failed on R-Car V3U
  Revert "can: xilinx_can: Limit CANFD brp to 2"
  can: bcm: use call_rcu() instead of costly synchronize_rcu()
====================

Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04 20:21:01 -07:00
Dmitry Baryshkov
1ff1da40d6 Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', 'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi', 'msm-next-lumag-mdp5' and 'msm-next-lumag-mdp4' into msm-next-lumag
Changes in this merge:
Core:
- client utilization via fdinfo support
- fix fence rollover issue

DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
- enable DSPP support for sc7280

DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change

MDP5:
- MSM8953 perf data

HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05 06:01:16 +03:00
Rob Clark
2311720a01 drm/msm: Fix fence rollover issue
And while we are at it, let's start the fence counter close to the
rollover point so that if issues slip in, they are more obvious.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: fde5de6cb4 ("drm/msm: move fence code to it's own file")
Fixes: 5f3aee4ceb ("drm/msm: Handle fence rollover")
Patchwork: https://patchwork.freedesktop.org/patch/489619/
Link: https://lore.kernel.org/r/20220615162435.3011793-1-robdclark@gmail.com
[DB: fixed the conflict while applying the patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05 06:01:11 +03:00
Wan Jiabing
4400c3a1d4 drm/msm: Use div64_ul instead of do_div
Fix following coccicheck warning:
drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead.

Use div64_ul instead of do_div to avoid a possible truncation.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/483499/
Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05 06:01:11 +03:00
Rob Clark
cfebe3fd59 drm/msm: Expose client engine utilization via fdinfo
Similar to AMD commit
8744425411 ("drm/amdgpu: Add show_fdinfo() interface"), using the
infrastructure added in previous patches, we add basic client info
and GPU engine utilisation for msm.

Example output:

	# cat /proc/`pgrep glmark2`/fdinfo/6
	pos:	0
	flags:	02400002
	mnt_id:	21
	ino:	162
	drm-driver:	msm
	drm-client-id:	7
	drm-engine-gpu:	1734371319 ns
	drm-cycles-gpu:	1153645024
	drm-maxfreq-gpu:	800000000 Hz

See also: https://patchwork.freedesktop.org/patch/468505/

v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst
v3: spelling and compiler warning

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/488906/
Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05 06:01:11 +03:00
Rob Clark
1981c35bf7 drm: Add DRM_GEM_FOPS
The DEFINE_DRM_GEM_FOPS() helper is a bit limiting if a driver wants to
provide additional file ops, like show_fdinfo().

v2: Split out DRM_GEM_FOPS instead of making DEFINE_DRM_GEM_FOPS
    varardic
v3: nits

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Patchwork: https://patchwork.freedesktop.org/patch/488904/
Link: https://lore.kernel.org/r/20220609174213.2265938-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05 06:01:11 +03:00
Rob Clark
6867c9aff8 drm/msm: Make msm_gem_free_object() static
Misc small cleanup I noticed.  Not called from another object file since
commit 3c9edd9c85 ("drm/msm: Introduce GEM object funcs")

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489362/
Link: https://lore.kernel.org/r/20220613204910.2651747-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-05 06:01:07 +03:00
Dmitry Baryshkov
93b793d88d clk: qcom: gcc-msm8960: create tsens device if there are no child nodes
Currently gcc-msm8960 driver manually creates tsens platform device
manually. It would be better to follow IPQ8064 approach, where tsens
device is defined as gcc's child device in the device tree. If nothing
else, it removes gcc's dependency on QFPROM, thus allowing clock
controller to be probed earlier.

Don't create it in case there are available child nodes (tsens) inside
the gcc's device tree node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-4-dmitry.baryshkov@linaro.org
2022-07-04 21:58:39 -05:00
Dmitry Baryshkov
621f984840 dt-bindings: clock: qcom,gcc-apq8064: split tsens to the child node
Split tsens properties to the child node of the gcc. This follows the
lead of ipq8064 (which also uses a separate node for tsens) and makes
device tree closer to other platforms, where tsens is a completely
separate device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-3-dmitry.baryshkov@linaro.org
2022-07-04 21:58:39 -05:00
Dmitry Baryshkov
91a4cbf933 dt-bindings: clock: qcom,gcc-apq8064: move msm8960 compat from gcc-other.yaml
MSM8960 shares the design (and the driver) of the global clock
controller with APQ8064. Move it from clock/qcom,gcc-other.yaml to
clock/qcom,gcc-apq8064.yaml.

As the example in gcc-other.yaml was using qcom,gcc-msm8960 compat string,
change it to qcom,gcc-msm8974.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-2-dmitry.baryshkov@linaro.org
2022-07-04 21:58:39 -05:00
Yassine Oudjana
f35aaef152 arm64: dts: qcom: msm8996: Add interconnect support
Add interconnect providers for the multiple NoCs available on the platform,
and assign interconnects used by some blocks.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211021132329.234942-6-y.oudjana@protonmail.com
2022-07-04 21:55:08 -05:00
Kris Bahnsen
e95ea0f687 ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
Device-tree incorrectly used "ngpio" which caused the driver to
fallback to 32 ngpios.

This platform has 62 GPIO registers.

Fixes: 9ff8e9fcce ("ARM: dts: TS-7970: add basic device tree")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 09:06:47 +08:00
Sean Anderson
3c12e9da30 arm64: dts: ls1028a: Update SFP node to include clock
The clocks property is now mandatory. Add it to avoid warning message.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Fixes: eba5bea8f3 ("arm64: dts: ls1028a: add efuse node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 09:06:34 +08:00
Sean Anderson
e0f6d9eba3 arm64: dts: Add SFP node for TA 3.0 devices
This adds an SFP node for Trust Architecture 3.0 devices.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 09:06:09 +08:00
Sean Anderson
043dce4e42 arm64: dts: layerscape: Add SFP node for TA 2.1 devices
This adds an appropriate SFP node for Trust Architecture 2.1 devices.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 09:05:44 +08:00
Sean Anderson
04069a86bf ARM: dts: layerscape: Add SFP node for TA 2.1 devices
This adds an appropriate SFP node for Trust Architecture 2.1 devices.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 09:04:14 +08:00
Yang Yingliang
63f9815307 soc: fsl: guts: check return value after calling of_iomap() in fsl_guts_get_soc_uid()
of_iomap() may return NULL, so we need check the return value.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 08:41:55 +08:00
Yang Yingliang
edf12b913a soc: fsl: guts: fix return value check in fsl_guts_init()
In case of error, of_iomap() returns NULL pointer not ERR_PTR().
The IS_ERR() test in the return value check should be replaced
with NULL test and return -ENOMEM as error value.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05 08:41:20 +08:00
Linus Walleij
c6aaccf1c9 ARM: dts: ux500: Drop unused i2c power domain supply
This regulator supply is replaced by the proper power
domain.

Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220701225339.814962-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-05 01:07:29 +02:00
Samuel Holland
79471f29ec dt-bindings: display: sun4i: Fix D1 pipeline count
When adding the bindings for the D1 display engine, I missed the
condition for the number of pipelines. D1 has two mixers, so it
will have two pipeline references.

Fixes: ae5a5d26c1 ("dt-bindings: display: Add D1 display engine compatibles")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702032921.22433-1-samuel@sholland.org
2022-07-04 22:41:26 +02:00
Mark Brown
900bd8cb85 arm64: defconfig: Enable Allwinner built in CODECs
Allwinner provide an audio CODEC as part of their SoCs which is used on a
number of designs, enable the driver as part of defconfig in order to
improve coverage of this in the various automated testing systems.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org
2022-07-04 22:25:02 +02:00
Samuel Holland
b8eb2df19f arm64: dts: allwinner: a64: orangepi-win: Fix LED node name
"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
2022-07-04 22:14:23 +02:00
Samuel Holland
b17403a560 clk: sunxi: Do not select the PRCM MFD
The PRCM MFD driver is already selected by the two platforms where it is
actually used (MACH_SUN6I and MACH_SUN8I). Selecting it here builds it
unnecessarily on the rest of the Allwinner platforms.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702190135.51744-2-samuel@sholland.org
2022-07-04 21:59:30 +02:00
Samuel Holland
2b4c206963 clk: sunxi: Limit legacy clocks to 32-bit ARM
The sunxi legacy clocks were never compatible with any 64-bit SoC,
so there is no point in building them as part of a 64-bit ARM kernel.
They make even less sense being built in to a 64-bit RISC-V kernel.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702190135.51744-1-samuel@sholland.org
2022-07-04 21:59:19 +02:00
Hangyu Hua
21779cc21c
drm: bridge: sii8620: fix possible off-by-one
The next call to sii8620_burst_get_tx_buf will result in off-by-one
When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same
thing happens in sii8620_burst_get_rx_buf.

This patch also change tx_count and tx_buf to rx_count and rx_buf in
sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and
use rx_buf.

Fixes: e19e9c692f ("drm/bridge/sii8620: add support for burst eMSC transmissions")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com
2022-07-04 20:38:34 +02:00
Kalyan Thota
fca5ad26b7 drm/msm/disp/dpu1: add dspp support for sc7280
Add destination side post processing hw block support in sc7280.

This hwblock enablement is necessary to support color features
like CT Matix (Ex: Night Light feature)

Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490382/
Link: https://lore.kernel.org/r/1655802387-15275-1-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04 21:18:44 +03:00
Vladimir Lypak
eeda2bc4fc drm/msm/mdp5: Add perf data for MDP v1.16
Add the perf data for the mdp found in msm8953.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489153/
Link: https://lore.kernel.org/r/20220610225304.267508-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04 21:05:31 +03:00
Dmitry Baryshkov
97b10e15df drm/msm/mdp4: get rid of struct mdp4_platform_config
Struct mdp4_platform_config is a relict from the DT-conversion time.
Move the max_clk field to the mdp4_kms_init(), the place where it is
used and drop the struct mdp4_platform_config and the mdp4_get_config()
function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485050/
Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04 21:05:31 +03:00
Dmitry Baryshkov
a143890fef drm/msm/mdp4: move iommu_domain_alloc() call close to its usage
Move iommu_domain_alloc() in front of adress space/IOMMU initialization.
This allows us to drop it from struct mdp4_cfg_platform which
remained from the pre-DT days.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485049/
Link: https://lore.kernel.org/r/20220505135008.1351533-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04 21:05:31 +03:00