Many settings of 8851B are the same as 8852B or 8852A, like DLE (Data link
engine), security engine and so on. Update them according to hardware
design.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330133324.19538-4-pkshih@realtek.com
For two RF paths chips, we normally set path B as main path by default.
8851B has single one RF path, so set TX path to A and set mapping of
path B to 0.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330133324.19538-3-pkshih@realtek.com
The chip contains digital and analog parts, and each of them has its own
version number. This is used by BT coexistence mechanism to make strategy
decision for different analog version.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330133324.19538-2-pkshih@realtek.com
Turn on hardware CFO (central frequency offset) compensation based on IC
capability, and improve digital CFO compensation accuracy by using
more fixed points number.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330132352.13647-1-pkshih@realtek.com
One chip can have different RFE (RF front end) types which we will judge
at runtime. And, different RFE types may use different RF parameter tables.
Though we didn't really meet this case previously, we are going to meet it
on upcoming chip RTL8851B. So, this commit handles parameter tables for
runtime RFE type.
We now encapsulate rtw89_txpwr_rule_<2/5/6>ghz tables into rtw89_rfe_parms.
Then, each chip defines its default parameter tables, and if needed, it can
configure extra parameter tables by RFE type. Finally we determine runtime
parameter tables by RFE type if one is configured. Otherwise, we use the
default parameter tables.
For now, we just move all settings under default parameter tables. We will
configure parameter tables by RFE types in separate commits afterwards.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230330080331.37155-1-pkshih@realtek.com
This contains minor fixes and cleanups. Note that one of the patches
here includes ARM firmware changes, but I picked that up after checking
with Sudeep and Rob because it didn't seem worth splitting it up any
further.
-----BEGIN PGP SIGNATURE-----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=xTHK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3Yhy
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.4-rc1
This contains minor fixes and cleanups. Note that one of the patches
here includes ARM firmware changes, but I picked that up after checking
with Sudeep and Rob because it didn't seem worth splitting it up any
further.
* tag 'tegra-for-6.4-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: Use of_property_present() for testing DT property presence
firmware: tegra: bpmp: Fix error paths in debugfs
Link: https://lore.kernel.org/r/20230406124804.970394-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains various minor cleanups and fixes as well as support for several
more wake events on Tegra234.
-----BEGIN PGP SIGNATURE-----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=lDCY
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CjZi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.4-rc1
Contains various minor cleanups and fixes as well as support for several
more wake events on Tegra234.
* tag 'tegra-for-6.4-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
soc/tegra: pmc: Support software wake-up for SPE
soc/tegra: pmc: Add wake source interrupt for MGBE
soc/tegra: pmc: Add the PMIC wake event for Tegra234
soc/tegra: bpmp: Actually free memory on error path
soc/tegra: cbb: remove linux/version.h
Link: https://lore.kernel.org/r/20230406124804.970394-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the discuss threads [1] [2], new firmware format break user space
because older drivers can't recognize new firmware format. To avoid this,
the new format will be named rtw89/rtw8852b_fw-1.bin and only new driver
try to load it. Old drivers only load original and understandable firmware
rtw89/rtw8852b_fw.bin.
More, new driver will be still backward compatible with old firmware, so
original firmware can be used by new driver.
If there is newer firmware format is introduced, rtw89/rtw8852b_fw-2.bin
will be given. The same rules will be applied like above. So, we will have
firmware like below in linux-firmware in the future.
rtw89/rtw8852b_fw-2.bin
rtw89/rtw8852b_fw-1.bin
rtw89/rtw8852b_fw.bin
After this patch, MODULE_FIRMWARE() of 8852A/B/C become
rtw89/rtw8852a_fw.bin
rtw89/rtw8852b_fw-1.bin
rtw89/rtw8852c_fw.bin
[1] https://lore.kernel.org/linux-wireless/df1ce994-3368-a57e-7078-8bdcccf4a1fd@gmail.com/T/#m24cb43be31a762d0ea70bf07f27ae96c59f6931b
[2] https://bugzilla.kernel.org/show_bug.cgi?id=217207
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320130606.20777-4-pkshih@realtek.com
Since we are going to load more than one firmware and some are not
presented or optional, using asynchronous API request_firmware_nowait()
will become complicated. Also, we want to use firmware_request_nowarn()
to avoid warning messages when loading optional files. So, use
schedule_work to be simpler.
To abstract loading a firmware or file, define a struct rtw89_fw_req_info
containing a struct firmware and a completion to ensure this firmware is
loaded completely.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320130606.20777-3-pkshih@realtek.com
In early feature bitmap obtained from rtw89_early_fw_feature_recognize(),
the bits needed to check get increased. It's more friendly to work with
RTW89_CHK_FW_FEATURE(). So, we concentrate the flow of iterating FW feature
configures and calling RTW89_SET_FW_FEATURE() for various uses. And then,
we adjust rtw89_early_fw_feature_recognize() for RTW89_CHK_FW_FEATURE().
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230320130606.20777-2-pkshih@realtek.com
This contains a single commit to drop MODULE_LICENSE() from a driver
that can't be built as a module since that can now confuse tooling.
-----BEGIN PGP SIGNATURE-----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=LKp/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=k9qX
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
ARM: tegra: Core changes for v6.4-rc1
This contains a single commit to drop MODULE_LICENSE() from a driver
that can't be built as a module since that can now confuse tooling.
* tag 'tegra-for-6.4-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove MODULE_LICENSE in non-modules
Link: https://lore.kernel.org/r/20230406124804.970394-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just one bugfix and one improvement to how forwarded syslogs are sent to
dmesg.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCZC5yjgAKCRAd+FPLCI8z
YnjIAPwLA3EmD7ZGkGN9HXeY1zQ777FSuOgnWCqr5YJtSYg/ogD/TlLSafLhjWIP
jqiGJ/v0qfNqgb80T6n4eDJ4rtz4+AY=
=ESHf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yLnT
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-6.4' of https://github.com/AsahiLinux/linux into soc/drivers
Apple SoC RTKit updates for 6.4.
Just one bugfix and one improvement to how forwarded syslogs are sent to
dmesg.
* tag 'asahi-soc-rtkit-6.4' of https://github.com/AsahiLinux/linux:
soc: apple: rtkit: Crop syslog messages
soc: apple: rtkit: Fix buffer address field width
Link: https://lore.kernel.org/r/0dbd2dc1-6a2c-5b21-354b-d8314937e8e7@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We used to store operating channel info after associated. However, scan
might happen before that. Without switching back to operating channel,
authentication or association might fail. Therefore, we switch back to
operating channel when the scanning vif's BSSID is non-zero, which
implies connected or during attempt to connect.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-6-pkshih@realtek.com
Use POWER_ON flag to make sure power on/off is symmetric. Since both
remain_on_channel and hw_scan both alter the power state, this makes
sure that we don't enter/leave IPS mode twice.
Also, replace IPS related functions with inline function that does
similar logic so we can track it more easily.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-5-pkshih@realtek.com
Add support of remain on channel ops. Since channel context is
required to enable multi-channel concurrent(MCC) and the current
ROC in mac80211 don't support more than 1 channel context, add this
to let P2P and other protocols relying on this work as expected.
The off-channel duration and cancel timing is purely controlled by
upper layers.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-4-pkshih@realtek.com
Allocate a per-skb completion to track those skbs we are interested in
and wait for them to complete transmission with TX status.
Normally, the completion object is freed by wait side, but it could be
timeout result that complete side should free the object instead. Add a
owner field with RCU to determine which side should free the object.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-3-pkshih@realtek.com
Adding this supports beacon filter and connection quality monitor.
To make host CPU wake up less, let firmware perform signal
monitoring and beacon processing, then notify driver upon signal
changes or beacon loss.
This feature needs firmware 0.27.56 or newer to support it.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230411124832.14965-2-pkshih@realtek.com
please pull the following:
- Rob makes use of the of_address_to_resource() helper instead of open
coding it in the Kona SMC code.
-----BEGIN PGP SIGNATURE-----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=xsFP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iU7z
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux into soc/arm
This pull request contains ARM-based platform code changes for 6.4,
please pull the following:
- Rob makes use of the of_address_to_resource() helper instead of open
coding it in the Kona SMC code.
* tag 'arm-soc/for-6.4/soc' of https://github.com/Broadcom/stblinux:
ARM: bcm: Use of_address_to_resource()
Link: https://lore.kernel.org/r/20230410232606.1917803-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Use of_cpu_node_to_id() to read CPU node 'reg'.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZDO7RwAKCRCKwlD9ZEnx
cN5MAP96emLuyEeV2srYuaCTWhPRuJ8ze0gSyoRiMHNJz4EWOwD+Ii2AswTIWhwU
D6mJcLY5fqUTin9sdboT3S18gHJlFAw=
=B76T
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=o8j1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/arm
Renesas ARM SoC updates for v6.4
- Use of_cpu_node_to_id() to read CPU node 'reg'.
* tag 'renesas-arm-soc-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: sh-mobile: Use of_cpu_node_to_id() to read CPU node 'reg'
Link: https://lore.kernel.org/r/cover.1681113113.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of changes from Oleksij Rempel which make it possible
to configure Ethernet refclock from device tree.
- Use common DT helpers to test DT property presence and read boolean
properties.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQxHpoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7V+AgArHo+ztgKv4vCde0GanzBpRmxdJRd
oE/DJzIXgbWM4yajJm25x7LQV02atxU2+ssw17/x/Ac2xMXg6NPkBrqXlyylbJQG
+a8k/qX7pBipM3vjlIxJGBf3+BNCYDP/QPRemSQzmOY8kydGfympT0Ck/kuWsEca
FsAe77W4WpcEBQcB/dj5D33K+kr6bkkEwm1Ip07taR1KFUpFNB3FV7CD8rXa1LHn
SyFxk5SfdQZhuCArwZwUQjc6ZxJInECG8PBqfMSGOX/ueoByAY5I4GHB4GWRv0BD
j7N2C/Eg9hvbKWJ+ErlPuqB/H2gVhncAYIwHzdlKyZTN3jN/ztuQ7JQhTg==
=MjV8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G9TP
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC changes for 6.4:
- A couple of changes from Oleksij Rempel which make it possible
to configure Ethernet refclock from device tree.
- Use common DT helpers to test DT property presence and read boolean
properties.
* tag 'imx-soc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Use of_property_read_bool() for boolean properties
ARM: mxs: Use of_property_present() for testing DT property presence
ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite
ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is present
Link: https://lore.kernel.org/r/20230408101928.280271-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-2-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.
The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.
Base drivers for IPQ5332 and IPQ9574 are enabled.
-----BEGIN PGP SIGNATURE-----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=9aIE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=slvv
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.4
This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.
The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.
Base drivers for IPQ5332 and IPQ9574 are enabled.
* tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable IPQ9574 SoC base configs
arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK
arm64: defconfig: add PMIC GLINK modules
arm64: defconfig: enable Qualcomm pin controller drivers
arm64: defconfig: Enable qcom msm899{4,8} clk drivers
arm64: defconfig: Switch msm8996 clk drivers to module
arm64: defconfig: Enable QCOM eUSB2 SNPS PHY and repeater
arm64: defconfig: Enable IPQ5332 SoC base configs
Link: https://lore.kernel.org/r/20230410155955.5329-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32MP13 platform relies on OPTEE to boot: Clocks and regulators are
handled in the secure world by OPTEE and exported to the non secure world
(LINUX) thanks to ARM SCMI protocol.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230413072042.30657-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the U8500 defconfig accordingly:
- Add the NFC modules used by some U8500-based systems.
- Switch out the now deleted UX500 crypto drivers to the
STM32 drivers that we have augmented to work with
UX500.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405105439.1739575-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
-----BEGIN PGP SIGNATURE-----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=3Uaf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ikZD
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
A few more Qualcomm ARM64 DeviceTree fixes for 6.3
The GPIO polarity of the WSA881x shutdown GPIO was inconsistent and had
to be corrected in the driver, this fixes the polarity in the DeviceTree
for QRB5165 RB5, SM8250 MTP, Samsung Galaxy Book 2 and Lenovo Yoga C630.
The recent rearrangement of nodes among the IPQ8074 accidentally enabled
the PCIe PHYs, rather than the PCIe controllers. This is being
corrected, to restore PCIe functionality.
PMK8280 PON node has the wrong compatible, which recently caused the
driver to stop probing. This is corrected and the required "pbs" region
is added.
With support for HBR3 introduced, it's noted that SC7280 Herobrine
devices are having trouble running at this rate. This drops the claim
that it's supported, until further analysis can be done.
* tag 'qcom-arm64-fixes-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node
arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity
arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity
Link: https://lore.kernel.org/r/20230410153850.4752-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmQx/6UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYMiB/45skI/LcajSjuqIJpAC+cDeCs/IaQb6aev
4fnwBRYgb836JvThTGeOn4KRe2avnZMfyjn3IlkHhYBHtLukS8jcuNuU+T+oD1/n
Yss63kUSbMCvNl13uCSz/dqsaFZJ1x8hHth0b19PlGWnnBgtzWWWScr371m+PsF6
2x2dnteRvQcUyWa8/5Xavgc8bseMds2SiKEc9Y58MTwRVL/pqfh9AFJhsWRJYFsN
x0SU+Gwopg2qW+Mfdm6DOK1m08Vu6Uaw1zftF06/oAnDqvYMiVSWfsFIpW5eEi/T
kb5ovzTTDwnLz/n8jkG1ldB7hQY362NQjyIc/GoUab/03yxyFE63
=JS4f
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yjl8
-----END PGP SIGNATURE-----
Merge tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.
* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
arm64: dts: rockchip: add rk3588 cache level information
arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
ARM: dts: rockchip: fix a typo error for rk3288 spdif node
arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name
Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some Qualcomm platforms, like SC8280XP, the attempt to set PC mode
during boot fails with PSCI_RET_DENIED and since commit 998fcd001f
("firmware/psci: Print a warning if PSCI doesn't accept PC mode") this
is now logged at warning level:
psci: failed to set PC mode: -3
As there is nothing users can do about the firmware behaving this way,
demote the warning to info level and clearly mark it as a firmware bug:
psci: [Firmware Bug]: failed to set PC mode: -3
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The if statement here is misleading, we return zero anyway
since we just checked the 'ret' variable, simplify the code
to remove the condition entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.57c1eb58e655.I1b47a7771cd66306931089c150c6b5b240bdcba5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The setting of the rate used for non station cases did not take into
consideration the interface type etc., thus when probe responses
are transmitted on P2P Device interface etc. CCK rates were used
which is not allowed.
Modify the code so the non station case would consider the
interface type etc. For HWs/FWs that do not support rate control,
preserve the previous behavior, i.e., take the rate from the
skb metadata and adjust as needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.fa0e4d42205d.Iab4784560c77b965fec070d4d0a1ec84171d94ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have MLO, then the deflink.ap_sta_id cannot be used.
However, we can use the new mvmvif->ap_sta pointer for the
validation instead.
Also don't do it multiple times for different FW instances
of the same AP STA (TDLS STAs are only on a single link).
Note that this isn't really working right yet since the
underlying flush code hasn't been updated yet to know of
multiple link STAs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.7d747df44d65.Ie5392859fab4cfb73c20b49bfee2caadef5fd8ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the full STA mask and selecting the correct link
for key installation.
While at it, catch errors if this function returns a bad
zero station mask, rather than waiting for the firmware to
crash on it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.cedae2f21829.Iae07b736c3109d085ad5b74ec8282ce45020da39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of relying on the AP STA ID and dereferencing our
firmware -> mac80211 STA array when we really only need
the STA, not the per-link information (and might not have
it, e.g. for a pairwise key installation where this is
relevant), keep track of the AP STA as a pointer to the
mac80211 STA, protected by the mutex. Then use it here in
the key code instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.7db01b1508de.I88e6d252cdb0a6e4581d7c5fd7cbc037b4fd40ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.
static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
void *buf, ssize_t *size,
ssize_t *bytes_copied)
{
int buf_size_left = count - *bytes_copied;
buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
if (*size > buf_size_left)
*size = buf_size_left;
If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.
This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clang static analysis reports this representative issue
dbg.c:1455:6: warning: Branch condition evaluates to
a garbage value
if (!rxf_data.size)
^~~~~~~~~~~~~~
This check depends on iwl_ini_get_rxf_data() to clear
rxf_data but the function can return early without
doing the clear. So move the memset before the early
return.
Fixes: cc9b6012d3 ("iwlwifi: yoyo: use hweight_long instead of bit manipulating")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clang static analysis reports this issue
d3.c:567:22: warning: The left operand of '>' is
a garbage value
if (seq.tkip.iv32 > cur_rx_iv32)
~~~~~~~~~~~~~ ^
seq is never initialized. Call ieee80211_get_key_rx_seq() to
initialize seq.
Fixes: 0419e5e672 ("iwlwifi: mvm: d3: separate TKIP data from key iteration")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.6dd372f84f93.If1f708c90e6424a935b4eba3917dfb7582e0dd0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add RF step id handling and handle for BZ device.
Read CNV Aux register and uses for no OTP case.
Add missing rf support for Bz/Bnj device and correct/add
the mapping for rf-type if OTP not present.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.8f2e2fff7bbc.Iee5554178bc5f134dcc28591db0968e619afbdca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of UHB scan that follows a scan on legacy bands,
consider both scan commands as part of the same scan cycle,
and thus configure them to use the same antenna configuration.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.fd582c423ad8.I35239f94cb3ee1642d16936199c336a07ec2df8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't allow buffer allocation TLV with zero req_size since it
leads later to division by zero in iwl_dbg_tlv_alloc_fragments().
Also, NPK/SRAM locations are allowed to have zero buffer req_size,
don't discard them.
Fixes: a9248de424 ("iwlwifi: dbg_ini: add TLV allocation new API support")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.5d6688ed74d8.I5c2f3a882b50698b708d54f4524dc5bdf11e3d32@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
