Update the driver implementations to fit those data exposed
by PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ID seen in the wild and it is a valid ST micro ID.
An offset of 1 for the device ID enum is needed when adding support for
retrieving the ID from device_get_match_data() to allow detection of
NULL pointer and fallback to i2c_device_id table.
DSDT chunk cropped for relevant parts.
Scope (_SB.PCI0.I2C5)
{
Device (DEV)
{
Name (_HID, EisaId ("SMO8B30")) // _HID: Hardware ID
Name (_CID, EisaId ("SMO8B30")) // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x006A, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C5",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_._CRS.RBUF */
}
Method (ROTM, 0, NotSerialized)
{
Name (RBUF, Package (0x03)
{
"0 -1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */
}
...
Link: https://lore.kernel.org/all/20230129182441.082f29d0@jic23-huawei/
Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230130201018.981024-2-jic23@kernel.org
The bpf_cgroup_kptr_get() kfunc has been removed, and
bpf_cgroup_acquire() / bpf_cgroup_release() now have the same semantics
as bpf_task_acquire() / bpf_task_release(). This patch updates the BPF
documentation to reflect this.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that bpf_cgroup_acquire() is KF_RCU | KF_RET_NULL,
bpf_cgroup_kptr_get() is redundant. Let's remove it, and update
selftests to instead use bpf_cgroup_acquire() where appropriate. The
next patch will update the BPF documentation to not mention
bpf_cgroup_kptr_get().
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
struct cgroup is already an RCU-safe type in the verifier. We can
therefore update bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and
subsequently remove bpf_cgroup_kptr_get(). This patch does the first of
these by updating bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and
also updates selftests accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patchwork instance is hosted on kernel.org and has been used for a
long time already, it was just not mentioned in MAINTAINERS.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230411090122.419761-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The wpan maintainers group is switching from Stefan's tree to a group
tree called 'wpan'. We will now maintain:
* wpan/wpan.git master:
Fixes targeting the 'net' tree
* wpan/wpan-next.git master:
Features targeting the 'net-next' tree
* wpan/wpan-next.git staging:
Same as the wpan-next master branch, but we will push there first,
expecting robots to parse the tree and report mistakes we would have
not catch. This branch can be rebased and force pushed, unlike the
others.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
[Fixed two small typos stefan@datenfreihafen.org]
Link: https://lore.kernel.org/r/20230411090122.419761-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
After replacing e->info, it is necessary to free the old einfo.
Fixes: f25da51fdc ("ieee802154: hwsim: add replacement for fakelb")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Chen Aotian <chenaotian2@163.com>
Link: https://lore.kernel.org/r/20230409022048.61223-1-chenaotian2@163.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches adds handling for system suspend.
Patches 1..4 make some code changes that simplify the
suspend implementation, mainly to avoid race conditions.
There are two seperate aspects to suspend, and these have
been done as two patches:
- the main suspend-resume handling,
- re-loading the firmware if necessary after resume.
One more step to allow for checking reference counting, user after free,
etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/ZDb9dycHQ11UIXwx@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is found that attaching a task to the top_cpuset does not currently
ignore CPUs allocated to subpartitions in cpuset_attach_task(). So the
code is changed to fix that.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In the case of CLONE_INTO_CGROUP, not all cpusets are ready to accept
new tasks. It is too late to check that in cpuset_fork(). So we need
to add the cpuset_can_fork() and cpuset_cancel_fork() methods to
pre-check it before we can allow attachment to a different cpuset.
We also need to set the attach_in_progress flag to alert other code
that a new task is going to be added to the cpuset.
Fixes: ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Tejun Heo <tj@kernel.org>
By default, the clone(2) syscall spawn a child process into the same
cgroup as its parent. With the use of the CLONE_INTO_CGROUP flag
introduced by commit ef2c41cf38 ("clone3: allow spawning processes
into cgroups"), the child will be spawned into a different cgroup which
is somewhat similar to writing the child's tid into "cgroup.threads".
The current cpuset_fork() method does not properly handle the
CLONE_INTO_CGROUP case where the cpuset of the child may be different
from that of its parent. Update the cpuset_fork() method to treat the
CLONE_INTO_CGROUP case similar to cpuset_attach().
Since the newly cloned task has not been running yet, its actual
memory usage isn't known. So it is not necessary to make change to mm
in cpuset_fork().
Fixes: ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Tejun Heo <tj@kernel.org>
After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.
Fixes: e44193d39e ("cpuset: let hotplug propagation work wait for task attaching")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tejun Heo <tj@kernel.org>
We use io_rsrc_node_switch() coupled with io_rsrc_node_switch_start()
for a bunch of cases including initialising ctx->rsrc_node, i.e. by
passing NULL instead of rsrc_data. Leave it to only deal with actual
node changing.
For that, first remove it from io_uring_create() and add a function
allocating the first node. Then also remove all calls to
io_rsrc_node_switch() from files/buffers register as we already have a
node installed and it does essentially nothing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d146fe306ff98b1a5a60c997c252534f03d423d7.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kernel test robot complains about __io_remove_buffers().
io_uring/kbuf.c:221 __io_remove_buffers() warn: variable dereferenced
before check 'bl->buf_ring' (see line 219)
That check is not needed as ->buf_ring will always be set, so we can
remove it and so silence the warning.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9a632bbf749d9d911e605255652ce08d18e7d2c6.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring/io_uring.c:432 io_prep_async_work() error: we previously
assumed 'req->file' could be null (see line 425).
Even though it's a false positive as there will not be REQ_F_ISREG set
without a file, let's add a simple check to make the kernel test robot
happy. We don't care about performance here, but assumingly it'll be
optimised out by the compiler.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6cfbe92c74b789c0b4f046f7f98d19b1ca2e5b7.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We know now what the completion context is for the uring_cmd completion
handling, so use that to have io_req_task_complete() decide what the
best way to complete the request is. This allows batching of the posted
completions if we have multiple pending, rather than always doing them
one-by-one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We'll need to reference count check 'struct perf_cpu_map', so wrap
accesses to its internal state to allow intercepting accesses to its
instances.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sysfs knob for per wq Page Request Service disable. This knob
disables PRS support for the specific wq. When this bit is set,
it also overrides the wq's block on fault enabling.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-17-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Provide the pid of the application for the opened file. This allows the
monitor daemon to easily correlate which app opened the file and easily
kill the app by pid if that is desired action.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-16-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Expose cr_faults and cr_fault_failures counters to the user space. This
allows a user app to keep track of how many fault the application is
causing with the completion record (CR) and also the number of failures
of the CR writeback. Having a high number of cr_fault_failures is bad as
the app is submitting descriptors with the CR addresses that are bad. User
monitoring daemon may want to consider killing the application as it may be
malicious and attempting to flood the device event log.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-15-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Embed a struct device for the user file context in order to export sysfs
attributes related with the opened file. Tie the lifetime of the file
context to the device. The sysfs entry will be added under the char device.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-14-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add counters per opened file for the char device in order to keep track how
many completion record faults occurred and how many of those faults failed
the writeback by the driver after attempt to fault in the page. The
counters are managed by xarray that associates the PASID with
struct idxd_user_context.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-13-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add event log processing for faulting of user batch descriptor completion
record.
When encountering an event log entry for a page fault on a completion
record, the driver is expected to do the following:
1. If the "first error in batch" bit in event log entry error info is
set, discard any previously recorded errors associated with the
"batch identifier".
2. Fix the page fault according to the fault address in the event log. If
successful, write the completion record to the fault address in user space.
3. If an error is encountered while writing the completion record and it is
associated to a descriptor in the batch, the driver associates the error
with the batch identifier of the event log entry and tracks it until the
event log entry for the corresponding batch desc is encountered.
While processing an event log entry for a batch descriptor with error
indicating that one or more descs in the batch had event log entries,
the driver will do the following before writing the batch completion
record:
1. If the status field of the completion record is 0x1, the driver will
change it to error code 0x5 (one or more operations in batch completed
with status not successful) and changes the result field to 1.
2. If the status is error code 0x6 (page fault on batch descriptor list
address), change the result field to 1.
3. If status is any other value, the completion record is not changed.
4. Clear the recorded error in preparation for next batch with same batch
identifier.
The result field is for user software to determine whether to set the
"Batch Error" flag bit in the descriptor for continuation of partial
batch descriptor completion. See DSA spec 2.0 for additional information.
If no error has been recorded for the batch, the batch completion record is
written to user space as is.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-12-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The descs_completed field for a completion record is part of a batch
descriptor completion record. It takes the same location as bytes_completed
in a normal descriptor field. Add to expose to user.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-11-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DSA supports page fault handling through PRS. However, the DMA engine
that's processing the descriptor is blocked until the PRS response is
received. Other workqueues sharing the engine are also blocked.
Page fault handing by the driver with PRS disabled can be used to
mitigate the stalling.
With PRS disabled while ATS remain enabled, DSA handles page faults on
a completion record by reporting an event in the event log. In this
instance, the descriptor is completed and the event log contains the
completion record address and the contents of the completion record. Add
support to the event log handling code to fault in the completion record
and copy the content of the completion record to user memory.
A bitmap is introduced to keep track of discarded event log entries. When
the user process initiates ->release() of the char device, it no longer is
interested in any remaining event log entries tied to the relevant wq and
PASID. The driver will mark the event log entry index in the bitmap. Upon
encountering the entries during processing, the event log handler will just
clear the bitmap bit and skip the entry rather than attempt to process the
event log entry.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-10-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Define idxd_copy_cr() to copy completion record to fault address in
user address that is found by work queue (wq) and PASID.
It will be used to write the user's completion record that the hardware
device is not able to write due to user completion record page fault.
An xarray is added to associate the PASID and mm with the
struct idxd_user_context so mm can be found by PASID and wq.
It is called when handling the completion record fault in a kernel thread
context. Switch to the mm using kthread_use_vm() and copy the
completion record to the mm via copy_to_user(). Once the copy is
completed, switch back to the current mm using kthread_unuse_mm().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-9-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a kmem cache per device for allocating event log fault context. The
context allows an event log entry to be copied and passed to a software
workqueue to be processed. Due to each device can have different sized
event log entry depending on device type, it's not possible to have a
global kmem cache.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-8-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a workqueue for user submitted completion record fault processing.
The workqueue creation and destruction lifetime will be tied to the user
sub-driver since it will only be used when the wq is a user type.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-7-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add debugfs entry to dump the content of the event log for debugging. The
function will dump all non-zero entries in the event log. It will note
which entries are processed and which entries are still pending processing
at the time of the dump. The entries may not always be in chronological
order due to the log is a circular buffer.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-6-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
An event log interrupt is raised in the misc interrupt INTCAUSE register
when an event is written by the hardware. Add basic event log processing
support to the interrupt handler. The event log is a ring where the
hardware owns the tail and the software owns the head. The hardware will
advance the tail index when an additional event has been pushed to memory.
The software will process the log entry and then advances the head. The
log is full when (tail + 1) % log_size = head. The hardware will stop
writing when the log is full. The user is expected to create a log size
large enough to handle all the expected events.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-5-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add setup of event log feature for supported device. Event log addresses
error reporting that was lacking in gen 1 DSA devices where a second error
event does not get reported when a first event is pending software
handling. The event log allows a circular buffer that the device can push
error events to. It is up to the user to create a large enough event log
ring in order to capture the expected events. The evl size can be set in
the device sysfs attribute. By default 64 entries are supported as minimal
when event log is enabled.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for changing of the event log size. Event log is a
feature added to DSA 2.0 hardware to improve error reporting.
It supersedes the SWERROR register on DSA 1.0 hardware and hope
to prevent loss of reported errors.
The error log size determines how many error entries supported for
the device. It can be configured by the user via sysfs attribute.
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current code continuously processes the interrupt as long as the hardware
is setting the status bit. There's no reason to do that since the threaded
handler will get called again if another interrupt is asserted.
Also through testing, it has shown that if a misprogrammed (or malicious)
agent can continuously submit descriptors with bad completion record and
causes errors to be reported via the misc interrupt. Continuous processing
by the thread can cause software hang watchdog to kick off since the thread
isn't giving up the CPU.
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230407203143.2189681-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMA controller needs two reset items to work properly on JH7110 SoC,
so there is need to constrain the items' value to 2, other platforms
have 1 reset item at most.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-2-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230331182141.1900348-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Align the declaration of ret in atmel_xdmac_resume() with the rest of
variables. Do this by adding ret to the line with declaration for i
variable.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-8-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead
save the global status in at_xdmac_suspend() and re-enable the cyclic
channel only if it was active before suspend.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case the system suspends to a deep sleep state where power to DMA
controller is cut-off we need to restore the content of GRWS register.
This is a write only register and writing bit X tells the controller
to suspend read and write requests for channel X. Thus set GRWS before
restoring the content of GE (Global Enable) regiter.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-5-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case there are DMA channels not paused by consumers in suspend
process (valid on AT91 SoCs for serial driver when no_console_suspend) the
driver pauses them (using at_xdmac_device_pause() which is also the same
function called by dmaengine_pause()) and then in the resume process the
driver resumes them calling at_xdmac_device_resume() which is the same
function called by dmaengine_resume()). This is good for DMA channels
not paused by consumers but for drivers that calls
dmaengine_pause()/dmaegine_resume() on suspend/resume path this may lead to
DMA channel being enabled before the IP is enabled. For IPs that needs
strict ordering with regards to DMA channel enablement this will lead to
wrong behavior. To fix this add a new set of functions
at_xdmac_device_pause_internal()/at_xdmac_device_resume_internal() to be
called only on suspend/resume.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-4-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
