snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.
Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
When seg is equal to MAX_ARRAY, the loop should break, otherwise
it will result in out of range access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://lore.kernel.org/r/20230227091751.589612-1-d.dulov@aladdin.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Remove unnecessary linebreaks, make the code more compact.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-7-bp@alien8.de
When accel drivers are disabled do not process into
sub-directories and create built-in archives:
AR drivers/accel/habanalabs/built-in.a
AR drivers/accel/ivpu/built-in.a
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
(cherry picked from commit dd61bbd0d1)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
When accel drivers are disabled do not process into
sub-directories and create built-in archives:
AR drivers/accel/habanalabs/built-in.a
AR drivers/accel/ivpu/built-in.a
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This makes the code flow a lot easier to follow.
No functional changes.
[ Tom: touchups. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de
MT8365 is similar to the other SoCs supported by the driver. It has only
one bank and 3 actual sensors that can be multiplexed. There is another
one sensor that does not have usable data.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add the binding documentation for the thermal support on MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-1-55a1ae14af74@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The inner/outer modes were added to abstract out common code that
were once duplicated between IPv4 and IPv6. As time went on the
abstractions have been removed and we are now left with empty
shells that only contain duplicate information. These can be
removed one-by-one as the same information is already present
elsewhere in the xfrm_state object.
Just like the input-side, removing this from the output code
makes it possible to use transport-mode SAs underneath an
inter-family tunnel mode SA.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The inner/outer modes were added to abstract out common code that
were once duplicated between IPv4 and IPv6. As time went on the
abstractions have been removed and we are now left with empty
shells that only contain duplicate information. These can be
removed one-by-one as the same information is already present
elsewhere in the xfrm_state object.
Removing them from the input path actually allows certain valid
combinations that are currently disallowed. In particular, when
a transport mode SA sits beneath a tunnel mode SA that changes
address families, at present the transport mode SA cannot have
AF_UNSPEC as its selector because it will be erroneously be treated
as inter-family itself even though it simply sits beneath one.
This is a serious problem because you can't set the selector to
non-AF_UNSPEC either as that will cause the selector match to
fail as we always match selectors to the inner-most traffic.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/devfreq/exynos-bus.c:504:34: error: ‘exynos_bus_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no need to declare two tables to just create directories,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230310231206.3952808-4-mcgrof@kernel.org>
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.
While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.
[ Tom: check override_err instead of err. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
All LPASS pins have basic GPIO function and most of the code is ready
for that. Add missing glue pieces to allow LPASS pins to work as GPIO,
which is going to be used on MTP8550 and QRD8550 boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When choosing GPIO function for pins, use the same glitch-free method as
main TLMM pinctrl-msm.c driver in msm_pinmux_set_mux(). This replicates
the commit d21f4b7ffc ("pinctrl: qcom: Avoid glitching lines when we
first mux to output") to LPASS pin controller with same justification.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The set_mux callback in SoC TLMM driver (pinctrl-msm.c) uses "group",
not "group_num" for the number of the pin group. Other places of
lpass-lpi also use "group", so let's be consistent for code readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
Cc: <stable@vger.kernel.org>
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To help gpiolib not fiddle around with the internals of the irqchip
flag the chip as immutable, adding the calls into the gpiolib core
required to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230216-gpio-at91-immutable-v2-1-326ef362dbc7@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
The declaration of s32_pinctrl_suspend/s32_pinctrl_resume is hidden
in an #ifdef, causing a compilation failure when CONFIG_PM_SLEEP is
disabled:
drivers/pinctrl/nxp/pinctrl-s32g2.c:754:38: error: 's32_pinctrl_suspend' undeclared here (not in a function); did you mean 's32_pinctrl_probe'?
drivers/pinctrl/nxp/pinctrl-s32g2.c:754:9: note: in expansion of macro 'SET_LATE_SYSTEM_SLEEP_PM_OPS'
754 | SET_LATE_SYSTEM_SLEEP_PM_OPS(s32_pinctrl_suspend,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove the bogus #ifdef and __maybe_unused annation on the global
functions, and instead use the proper LATE_SYSTEM_SLEEP_PM_OPS()
macro to pick set the function pointer.
As the function definition is still in the #ifdef block, this leads
to the correct code in all configurations.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230310140250.359147-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/pinctrl/pinctrl-sx150x.c:833:34: error: ‘sx150x_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312132702.352832-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert to use i_blocksize() for readability.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230310030821.66090-2-frank.li@vivo.com>
When tunneling aggregated USB3 (20 Gb/s) the bandwidth values that are
programmed to the ADP_USB3_CS_2 go higher than 4096 and that does not
fit anymore to the 12-bit field. Fix this by scaling the value using
the scale field accordingly.
Fixes: 3b1d8d577c ("thunderbolt: Implement USB3 bandwidth negotiation routines")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Current Intel USB4 host routers have hardware limitation that the USB3
bandwidth cannot go higher than 16376 Mb/s. Work this around by adding a
new quirk that limits the bandwidth for the affected host routers.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In order to apply quirks based on certain adapter types move call to
tb_check_quirks() happen after the adapters are initialized. This should
not affect the existing quirks.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
According to USB4 retimer specification, the process of firmware update
sequence requires issuing a SET_INBOUND_SBTX port operation that later
shall be followed by UNSET_INBOUND_SBTX port operation. This last step
is not currently issued by the driver but it is necessary to make sure
the retimers are put back to passthrough mode even during enumeration.
If this step is missing the link may not come up properly after
soft-reboot for example.
For this reason issue UNSET_INBOUND_SBTX after SET_INBOUND_SBTX for
enumeration and also when the NVM upgrade is run.
Reported-by: Christian Schaubschläger <christian.schaubschlaeger@gmx.at>
Link: https://lore.kernel.org/linux-usb/b556f5ed-5ee8-9990-9910-afd60db93310@gmx.at/
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Memory for the usb4->margining needs to be relased for the upstream port
of the router as well, even though the debugfs directory gets released
with the router device removal. Fix this.
Fixes: d0f1e0c2a6 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38 ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173f ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173f ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38 ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 5060060557)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It seems that commit bc3c5e0809 ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bc3c5e0809 ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com
(cherry picked from commit 3cba09a6ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are using hardcoded 7 for io and fast wake lines.
According to Bspec io and fast wake times are both 42us for
DISPLAY_VER >= 12 and 50us and 32us for older platforms.
Calculate line counts for these and configure them into PSR2_CTL
accordingly
Use 45 us for the fast wake calculation as 42 seems to be too
tight based on testing.
Bspec: 49274, 4289
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 64cf40a125 ("drm/i915/psr: Program default IO buffer Wake and Fast Wake")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com
(cherry picked from commit cb42e8ede5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Previous documentation suggested that PL1 power limit is always
enabled. However we now find this not to be the case on some
platforms (such as ATSM). Therefore enable PL1 power limit during hwmon
initialization.
Bspec: 51864
v2: Add Bspec reference (Gwan-gyeong)
v3: Add Fixes tag
Fixes: 99f55efb79 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203155309.1042297-1-ashutosh.dixit@intel.com
(cherry picked from commit 0349c41b05)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The hardware settings for color format and pitch are state of the
primary plane. Store the values in the primary plane's state structure
struct cirrus_primary_plane_state. Adapt all callers.
All fields in struct cirrus_device are now considered immutable after
initialization. Plane updates consider the difference between the old
and the new plane state before updating format or pitch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-17-tzimmermann@suse.de
Test a display mode against the available amount of video memory in
struct drm_mode_config_funcs.mode_valid, which cirrus implements in
cirrus_mode_config_mode_valid(). This helper tests display modes against
device-wide limits. Remove the now-obsolete per-CRTC test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-14-tzimmermann@suse.de
Inline cirrus_fb_blit_rect into its only caller. While at it, update
the code to use IOSYS_MAP_INIT_OFFSET(), which is the ideomatic way
of initializing struct iosys_map with an offset.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-11-tzimmermann@suse.de
Enable damage clipping on the primary plane and iterate over small
areas of reported framebuffer damage. Avoid the overhead of permanent
full-screen updates that cirrus currently implements.
This problem is indicated by the warning
drm_plane_enable_fb_damage_clips() not called
in the kernel's log. Without damage clipping, drivers do full updates
of the screen area. This is costly as many screen updates, such as
cursor movement or command-line input, only change a small portion
of the output. Damage clipping allows renderers to inform drivers about
the changed areas.
With the damage information known, cirrus now iterates over a list of
change areas and only flushes those to the hardware's scanout buffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-10-tzimmermann@suse.de
