[ Upstream commit ddf4098514 ]
Just like we do with alloc_contig_range(), let's convert all unknown
errors to -EBUSY, but WARN so we can look into the issue. For example,
offline_pages() could fail with -EINTR, which would be unexpected in our
case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-3-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f504e15b94 ]
When "unsafe unplug" is enabled, we don't fake-offline all memory ahead of
actual memory offlining using alloc_contig_range(). Instead, we rely on
offline_pages() to also perform actual page migration, which might fail
or take a very long time.
In that case, it's possible to easily run into endless loops that cannot be
aborted anymore (as offlining is triggered by a workqueue then): For
example, a single (accidentally) permanently unmovable page in
ZONE_MOVABLE results in an endless loop. For ZONE_NORMAL, races between
isolating the pageblock (and checking for unmovable pages) and
concurrent page allocation are possible and similarly result in endless
loops.
The idea of the unsafe unplug mode was to make it possible to more
reliably unplug large memory blocks. However, (a) we really should be
tackling that differently, by extending the alloc_contig_range()-based
mechanism; and (b) this mode is not the default and as far as I know,
it's unused either way.
So let's simply get rid of it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-2-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fe0241933 ]
The standard specifies that the initial number of queues is the
default, which is 1 (1 tx, 1 rx).
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230727172354.68243-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ced58bfa1 ]
The linux block layer requires bios/requests to have lengths with a 512
byte alignment. Some drivers/layers like dm-crypt and the directi IO code
will test for it and just fail. Other drivers like SCSI just assume the
requirement is met and will end up in infinte retry loops. The problem
for drivers like SCSI is that it uses functions like blk_rq_cur_sectors
and blk_rq_sectors which divide the request's length by 512. If there's
lefovers then it just gets dropped. But other code in the block/scsi
layer may use blk_rq_bytes/blk_rq_cur_bytes and end up thinking there is
still data left and try to retry the cmd. We can then end up getting
stuck in retry loops where part of the block/scsi thinks there is data
left, but other parts think we want to do IOs of zero length.
Linux will always check for alignment, but windows will not. When
vhost-scsi then translates the iovec it gets from a windows guest to a
scatterlist, we can end up with sg items where the sg->length is not
divisible by 512 due to the misaligned offset:
sg[0].offset = 255;
sg[0].length = 3841;
sg...
sg[N].offset = 0;
sg[N].length = 255;
When the lio backends then convert the SG to bios or other iovecs, we
end up sending them with the same misaligned values and can hit the
issues above.
This just has us drop down to allocating a temp page and copying the data
when we detect a misaligned buffer and the IO is large enough that it
will get split into multiple bad IOs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230709202859.138387-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d6f7e3938 ]
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707063335.13317-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa12c32b9 ]
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20230707063335.13317-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8183bb7e29 ]
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707063335.13317-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3de41ee5f ]
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06f2ab86a5 ]
If cfg80211 is providing extraie's for a scanning process then ath12k will
copy that over to the firmware. The extraie.len is a 32 bit value in struct
element_info and describes the amount of bytes for the vendor information
elements.
The problem is the allocation of the buffer. It has to align the TLV
sections by 4 bytes. But the code was using an u8 to store the newly
calculated length of this section (with alignment). And the new
calculated length was then used to allocate the skbuff. But the actual
code to copy in the data is using the extraie.len and not the calculated
"aligned" length.
The length of extraie with IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS enabled
was 264 bytes during tests with a wifi card. But it only allocated 8
bytes (264 bytes % 256) for it. As consequence, the code to memcpy the
extraie into the skb was then just overwriting data after skb->end. Things
like shinfo were therefore corrupted. This could usually be seen by a crash
in skb_zcopy_clear which tried to call a ubuf_info callback (using a bogus
address).
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230809081241.32765-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15159ec0c8 ]
Restore the mac pause state to user configuration when autoneg is disabled
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd64f80587 ]
As &qedi_percpu->p_work_lock is acquired by hard IRQ qedi_msix_handler(),
other acquisitions of the same lock under process context should disable
IRQ, otherwise deadlock could happen if the IRQ preempts the execution
while the lock is held in process context on the same CPU.
qedi_cpu_offline() is one such function which acquires the lock in process
context.
[Deadlock Scenario]
qedi_cpu_offline()
->spin_lock(&p->p_work_lock)
<irq>
->qedi_msix_handler()
->edi_process_completions()
->spin_lock_irqsave(&p->p_work_lock, flags); (deadlock here)
This flaw was found by an experimental static analysis tool I am developing
for IRQ-related deadlocks.
The tentative patch fix the potential deadlock by spin_lock_irqsave()
under process context.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230726125655.4197-1-dg573847474@gmail.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eebf0e84f ]
When preparing protection DIF I/O for DMA, the driver obtains reference
tags from scsi_prot_ref_tag(). Previously, there was a wrong assumption
that an all 0xffffffff value meant error and thus the driver failed the
I/O. This patch removes the evaluation code and accepts whatever the upper
layer returns.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230803211932.155745-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 785c00993d ]
The return value from the call to amd_pmf_get_pprof_modes() is int.
However, the return value is being assigned to an unsigned char
variable 'mode', so making 'mode' an int.
silence the warning:
./drivers/platform/x86/amd/pmf/sps.c:183:5-9: WARNING: Unsigned expression compared with zero: mode < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5995
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230727014315.51375-1-yang.lee@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1e213a9e3 ]
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it
won't be built to cause below compiling error if PCI is unset.
--------
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined!
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined!
--------
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-2-bhe@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e2d0c3365 ]
Hyper-V can run VMs at different privilege "levels" known as Virtual
Trust Levels (VTL). Sometimes, it chooses to run two different VMs
at different levels but they share some of their address space. In
such setups VTL2 (higher level VM) has visibility of all of the
VTL0 (level 0) memory space.
When the CONFIG_X86_MPPARSE is enabled for VTL2, the VTL2 kernel
performs a search within the low memory to locate MP tables. However,
in systems where VTL0 manages the low memory and may contain valid
tables, this scanning can result in incorrect MP table information
being provided to the VTL2 kernel, mistakenly considering VTL0's MP
table as its own
Add noop functions to avoid MP parse scan by VTL2.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/1687537688-5397-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86582e6189 ]
On a powermac platform, via the call path:
start_kernel()
time_init()
ppc_md.calibrate_decr() (pmac_calibrate_decr)
via_calibrate_decr()
ioremap() and iounmap() are called. The unmap can enable interrupts
unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a
warning later in the boot sequence in start_kernel().
Use the early_* variants of these IO functions to prevent this.
The issue is pre-existing, but is surfaced by commit 721255b982
("genirq: Use a maple tree for interrupt descriptor management").
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16e455a465 ]
Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers
a backtrace caused by the following field-spanning warning:
memcpy: detected field-spanning write (size 120) of single field
"¶ms_le->channel_list[0]" at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)
The driver still works after this warning. The warning was introduced by the
new field-spanning write checks which were enabled recently.
Fix this by replacing the channel_list[1] declaration at the end of
the struct with a flexible array declaration.
Most users of struct brcmf_scan_params_le calculate the size to alloc
using the size of the non flex-array part of the struct + needed extra
space, so they do not care about sizeof(struct brcmf_scan_params_le).
brcmf_notify_escan_complete() however uses the struct on the stack,
expecting there to be room for at least 1 entry in the channel-list
to store the special -1 abort channel-id.
To make this work use an anonymous union with a padding member
added + the actual channel_list flexible array.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 285975dd67 ]
sk_getsockopt() runs without locks, we must add annotations
to sk->sk_rcvtimeo and sk->sk_sndtimeo.
In the future we might allow fetching these fields before
we lock the socket in TCP fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d7ae22ae9 ]
The commit (SHA1: 5c844d57aa) provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9477 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1ce186db7 ]
This reverts commit bd1d129daa.
The dangling-pointer warnings were disabled kernel-wide by commit 49beadbd47
("gcc-12: disable '-Wdangling-pointer' warning for now") for v5.19. So this
hack in ath6kl is not needed anymore.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230724100823.2948804-1-kvalo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed0cf84e9c ]
It is incorrect in python to compare integer values using the "is" keyword.
The "is" keyword in python is used to compare references to two objects,
not their values. Newer version of python3 (version 3.8) throws a warning
when such incorrect comparison is made. For value comparison, "==" should
be used.
Fix this in the code and suppress the following warning:
/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20230705134408.6302-1-anisinha@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7dd44f4f3 ]
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't
be built to cause below compiling error if PCI is unset:
------
ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup':
clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap'
ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap'
------
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-8-bhe@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de02f2ac5d ]
Do not allow to probe on "__cfi_" or "__pfx_" started symbol, because those
are used for CFI and not executed. Probing it will break the CFI.
Link: https://lore.kernel.org/all/168904024679.116016.18089228029322008512.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d7f105edb ]
If the current task fails the check for the queried capability via
`capable(CAP_SYS_ADMIN)` LSMs like SELinux generate a denial message.
Issuing such denial messages unnecessarily can lead to a policy author
granting more privileges to a subject than needed to silence them.
Reorder CAP_SYS_ADMIN checks after the check whether the operation is
actually privileged.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83da30d73b ]
On FDT systems these command line processing are already taken care of
by early_init_dt_scan_chosen(). Add similar handling to the ACPI (non-
FDT) code path to allow these config options to work for ACPI (non-FDT)
systems too.
Signed-off-by: Zhihong Dong <donmor3000@hotmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54c2c9df08 ]
This is a port of commit 4fe4a6374c ("MIPS: Only fiddle with
CHECKFLAGS if `need-compiler'") to LoongArch.
We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_LOONGARCH variable, not set for targets such
as `distclean', etc. that neither include `.config' nor use the compiler.
Starting from commit 805b2e1d42 ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags. If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned.
It doesn't cause problems on LoongArch now. But as a guard we replace
the check for CONFIG_LOONGARCH with one for `need-compiler' instead, so
as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4912649e1c ]
Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This
ultimately causes a warning when the module probes. Fixes it.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20230718172024.67488-1-rgallaispou@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4139f992c4 ]
It is possible for dma_request_chan() to return EPROBE_DEFER, which
means acdev->host->dev is not ready yet. At this point dev_err() will
have no output. Use dev_err_probe() instead.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18b44bc5a6 ]
Commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get the i_version")
partially closed an IMA integrity issue when directly modifying a file
on the lower filesystem. If the overlay file is first opened by a user
and later the lower backing file is modified by root, but the extended
attribute is NOT updated, the signature validation succeeds with the old
original signature.
Update the super_block s_iflags to SB_I_IMA_UNVERIFIABLE_SIGNATURE to
force signature reevaluation on every file access until a fine grained
solution can be found.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de612738e9 ]
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25b054c3c8 ]
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a37c55b85 ]
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c21733754c ]
Currently huawei-wmi causes a lot of spam in dmesg on my
Huawei MateBook X Pro 2022:
...
[36409.328463] input input9: Unknown key pressed, code: 0x02c1
[36411.335104] input input9: Unknown key pressed, code: 0x02c1
[36412.338674] input input9: Unknown key pressed, code: 0x02c1
[36414.848564] input input9: Unknown key pressed, code: 0x02c1
[36416.858706] input input9: Unknown key pressed, code: 0x02c1
...
Fix that by ignoring events generated by ambient light sensor.
This issue was reported on GitHub and resolved with the following merge
request:
https://github.com/aymanbagabas/Huawei-WMI/pull/70
I've contacted the mainter of this repo and he gave me the "go ahead" to
send this patch to the maling list.
Signed-off-by: Konstantin Shelekhin <k.shelekhin@ftml.net>
Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1da0893aed ]
key might contain private part of the key, so better use
kfree_sensitive to free it.
Signed-off-by: Wang Ming <machel@vivo.com>
Link: https://lore.kernel.org/r/20230717101114.18966-1-machel@vivo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7783e97f85 ]
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.
Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.
Tested with BIOS 1.13.1.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ab18de2b ]
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3da4350637 ]
Microsoft Modern Wireless Headset (appearing on the host as "Microsoft
USB Link") has a playback and a capture mixer volume/switch, but they
are fairly broken. The descriptor reports wrong dB ranges for
playback, and the capture volume/switch don't influence on the actual
recording at all. Moreover, there seem instabilities in the
connection, and at best, we should disable the runtime PM.
So this ended up with a quirk entry for:
- Correct the playback dB range;
I picked up some reasonable values but it's a guess work
- Disable the capture mixer;
it's completely useless and confuses PA/PW
- Suppress get-sample-rate, apply the delay for message handling,
and suppress the auto-suspend
The behavior of the wheel control on the headset is somehow flaky,
too, but it's an issue of HID.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1207129
Link: https://lore.kernel.org/r/20230725092057.15115-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f85739c0b2 ]
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23adeb7056 ]
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090711.128247-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b69de265bd ]
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090654.128230-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a8735c155 ]
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090721.128264-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d20d35d1ad ]
According to the datasheet, the DMIC config should
be changed to { 0, 2 ,3 }
Signed-off-by: Edgar <ljijcj@163.com>
Link: https://lore.kernel.org/r/20230719054722.401954-1-ljijcj@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02fb23d727 ]
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230721090643.128213-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a43f95fdd3 ]
We need to specify charset, like "iocharset=utf-8", in mount options for
Chinese path if the nls_default don't support it, such as iso8859-1, the
default value for CONFIG_NLS_DEFAULT.
But now in reconnection the nls_default is used, instead of the one we
specified and used in mount, and this can lead to mount failure.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ed39ec11 ]
load_nls() take a char * parameter, use it to find nls module in list or
construct the module name to load it.
This change make load_nls() take a const parameter, so we don't need do
some cast like this:
ses->local_nls = load_nls((char *)ctx->local_nls->charset);
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a2278ce9c ]
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.
The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acea28a6b7 ]
If a DASD request fails an error recovery procedure (ERP) request might
be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set
for the original request. This is not what is expected when a user
specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP
requests.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
