Check return code of syscall_trace_enter(), and skip syscall
if -1. Return code will be left at what had been set by
ptrace or seccomp (in regs->d0).
No regression seen in testing with strace on ARAnyM.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230112035529.13521-2-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The bit map of error types to inject is 32-bit width [1].
Add parameter check to reflect the fact.
[1] ACPI Specification 6.4, Section 18.6.4. Error Types
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The existing no-op shims for when PM_DEVFREQ (or an individual governor)
only do half the job. The governor specific config/tuning structs need
to be available to avoid compile errors in drivers using devfreq.
Fixes: 6563f60f14 ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Patchwork: https://patchwork.freedesktop.org/patch/519801/
Link: https://lore.kernel.org/r/20230123153745.3185032-1-robdclark@gmail.com
The KVM rseq test is failing to build in -next due to a commit merged
from the tip tree which adds a wrapper for sys_getcpu() to the rseq
kselftests, conflicting with the wrapper already included in the KVM
selftest:
rseq_test.c:48:13: error: conflicting types for 'sys_getcpu'
48 | static void sys_getcpu(unsigned *cpu)
| ^~~~~~~~~~
In file included from rseq_test.c:23:
../rseq/rseq.c:82:12: note: previous definition of 'sys_getcpu' was here
82 | static int sys_getcpu(unsigned *cpu, unsigned *node)
| ^~~~~~~~~~
Fix this by removing the local wrapper and moving the result check up to
the caller.
Fixes: 99babd04b2 ("selftests/rseq: Implement rseq numa node id field selftest")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20230106-fix-kvm-rseq-build-v1-1-b704d9831d02@kernel.org
It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCY9A3iwAKCRB4tDGHoIJi
0qE4AQDPCcoarT/vLZ28H4wBHPUBxnmU1rut3uNM4f1lIqK0PgD+N6N3xGajmVy0
UzD8/qg2gua94rx/2dmE4PWvun+newk=
=Lqa0
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Dfx0
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC drivers for v6.3-mw0
It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: starfive: Add StarFive JH71XX pmu driver
dt-bindings: power: Add starfive,jh7110-pmu
soc: sifive: ccache: Add StarFive JH7110 support
dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC
Link: https://lore.kernel.org/r/Y9LNIm9pkr+Owv/e@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Krzysztof has contributed significantly to the PCI controller subsystem
recently through reviews, tooling and submissions.
Update the MAINTAINERS file to grant him the role he deserves.
Link: https://lore.kernel.org/r/20230130100850.24994-1-lpieralisi@kernel.org
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
GPIO library for OF is the only user for enum of_gpio_flags.
Move it there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
To check if a certain function (here e.g. pwmchip_add()) can be called
IS_REACHABLE is the better check. The relevant difference to IS_ENABLED
is that IS_REACHABLE evaluates to 0 if the current code is builtin but the
checked symbol is =m and so must not be used.
Today there is no practical impact as CONFIG_PWM is a bool.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The commit 899f6a9c4364 ("gpio: zevio: Use proper headers and drop
OF_GPIO dependency") missed one header this driver depends on. Add it.
Fixes: 899f6a9c4364 ("gpio: zevio: Use proper headers and drop OF_GPIO dependency")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpio_to_chip() function refers to the global GPIO numberspace
which is a problem we want to get rid of. Get this function out
of the header and open code it into gpiolib with appropriate FIXME
notices so no new users appear in the kernel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The s32 is compatible with int, no need to cast.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Platform data is a legacy interface to supply device properties
to the driver. In this case we don't have in-kernel users for it.
Moreover it uses plain GPIO numbers which is no-no for a new code.
Just remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace mentioning of legacy API by the latest one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver doesn't depend on the OF_GPIO to be compiled. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
UMS512 use the same GPIO and EIC controller with SC9860.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the Unisoc EIC controller binding to DT schema format.
Update the maxItems of 'reg' property, since the current gpio-eic-sprd
driver supports 3 reg items. Also removed a few similar examples.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Static allocatin is deprecated and may cause probe mess,
if probe order is unusual.
like this example
[ 2.553833] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178
[ 2.561401] gpiochip_find_base: found new base at 160
[ 2.564392] gpio gpiochip5: (twl4030): added GPIO chardev (254:5)
[ 2.564544] gpio gpiochip5: registered GPIOs 160 to 177 on twl4030
[...]
[ 2.692169] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 2.697357] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[ 2.703643] gpiochip_find_base: found new base at 178
[ 2.704376] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
[ 2.704589] gpio gpiochip6: registered GPIOs 178 to 181 on omap-gpmc
[...]
[ 2.840393] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.849365] gpio gpiochip7: (gpio-160-191): GPIO integer space overlap, cannot add chip
[ 2.857513] gpiochip_add_data_with_key: GPIOs 160..191 (gpio-160-191) failed to register, -16
[ 2.866149] omap_gpio 48310000.gpio: error -EBUSY: Could not register gpio chip
So probing was done in an unusual order, causing mess
and chips not getting their gpio in the end.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
irq_to_gpio() is legacy and unused API, remove it for good.
This leaves gpio_to_irq() as it's used yet in many places.
Nevertheless, removal of its counterpart is a good signal
to whoever even trying to consider using them that do not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace mentioning of legacy API by the latest one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_mm_gpiochip_add() is unused API, remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace mentioning of legacy API by the latest one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This change allows the GPIO core to read/change multiple pins in a
single driver call and subsequent I2C transfer. It helps a lot with
PCF857x devices, since their I2C protocol always reads/changes all
existing pins anyway. Therefore, when the GPIO client code does a bulk
operation on multiple pins, the driver makes a single I2C transfer.
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
No functional changes. This is a whitespace change only.
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cosmetic change only to improve the coding style. No functional change,
since 'unsigned' and 'unsigned int' are identical as far as the compiler
is concerned.
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Using this patch we are adding PMC compatible string for
Tegra234 in GPIO driver so the IRQ hierarchy can be set.
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that the regmap can be queried whether it might sleep, we can get
rid of the conservative setting "can_sleep = true". New drivers which
want to use gpio-regmap and can access the registers memory-mapped won't
have the restriction that their consumers have to use the
gpiod_*cansleep() variants anymore.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All new drivers should use fwnode and / or parent to provide the
necessary information to the GPIO library.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio_export_link() is legacy and unused API, remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Current GPIO label is fixed, so can't distinguish different GPIO
controllers through labels. Use dev name instead.
Fixes: 7f2691a196 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
By convention platform_data refers to structures passed to drivers by
code that registers devices. When talking about model-specific data
structures associated with OF compatibles, we usually call them chip_data.
In order to avoid confusion rename all mentions of platform_data to
chip_data.
Fixes: fbb19fe17e ("gpio: pca9570: add slg7xl45106 support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Now that everyone is using [devm_]fwnode_gpiod_get[_index]() APIs,
remove OF-specific [devm_]gpiod_get_from_of_node().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no more users of these APIs in the mainline kernel, remove
them. This leaves of_get_named_gpio() as the only legacy OF-specific
API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The function is only being called form the main gpiolib module, so
remove comment saying that it is also used by external callers.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The only user of this function is gpiolib-of.c so move it there.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no more users of of_gpio_count() in the mainline kernel,
remove it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the Fujitsu MB86S7x GPIO binding to DT schema format.
The "socionext,synquacer-gpio" compatible was not documented, but is
compatible with "fujitsu,mb86s70-gpio" and is in use (in u-boot
Synquacer dts).
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
