On MSM8960 the HDMI PHY provides the PLL clock to the MMCC. As we are
preparing to convert the MSM8960 to use DT clocks properties (rather
than global clock names), register the OF clock provider.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519211/
Link: https://lore.kernel.org/r/20230119132219.2479775-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Replace parent_names usage with parent_data. Note, that this makes the
PLL default to board's `pxo_board' clock rather than just `pxo' clock,
as we are on a way to deprecate the global cxo/pxo clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519210/
Link: https://lore.kernel.org/r/20230119132219.2479775-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cleanup usage of mr->page_shift and mr->page_mask and introduce
an extractor for mr->ibmr.page_size. Normal usage in the kernel
has page_mask masking out offset in page rather than masking out
the page number. The rxe driver had reversed that which was confusing.
Implicitly there can be a per mr page_size which was not uniformly
supported.
Link: https://lore.kernel.org/r/20230119235936.19728-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Isolate mr specific code from atomic_write_reply() in rxe_resp.c into
a subroutine rxe_mr_do_atomic_write() in rxe_mr.c.
Check length for atomic write operation.
Make iova_to_vaddr() static.
Link: https://lore.kernel.org/r/20230119235936.19728-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Isolate mr specific code from atomic_reply() in rxe_resp.c into
a subroutine rxe_mr_do_atomic_op() in rxe_mr.c.
Minor cleanups to rxe_check_range() and iova_to_vaddr().
Move enum resp_state to rxe.h
Link: https://lore.kernel.org/r/20230119235936.19728-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 622113b9f1 ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
Fixes: 622113b9f1 ("drm/ssd130x: Replace simple display helpers with the atomic helpers")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125184230.3343206-1-javierm@redhat.com
It was left unnoticed during the review that even if there is no OPP
table in device tree, one will be created by a call to the function
devm_pm_opp_set_clkname(). This leads to dsi_mgr_bridge_mode_valid()
rejecting all modes if DT contains no OPP table for the DSI host.
Rework dsi_mgr_bridge_mode_valid() to handle this case by actually
checking that the table is populated with frequency entries before
returning an error.
Fixes: 8328041b8c ("drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520076/
Link: https://lore.kernel.org/r/20230124203600.3488766-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add missing DSC hardware block register ranges to the snapshot utility
to include them in dmesg (on MSM_DISP_SNAPSHOT_DUMP_IN_CONSOLE) and the
kms debugfs file.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520175/
Link: https://lore.kernel.org/r/20230125101412.216924-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Although not handling a trap is a pretty bad situation to be in,
panicing the kernel isn't useful and provides no valuable
information to help debugging the situation.
Instead, dump the encoding of the unhandled sysreg, and inject
an UNDEF in the guest. At least, this gives a user an opportunity
to report the issue with some information to help debugging it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230112123829.458912-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Each read/write to a trapped timer system register results
in a whole kvm_timer_vcpu_put/load() cycle which affects all
of the timers, and a bit more.
There is no need for such a thing, and we can limit the impact
to the timer being affected, and only this one.
This drastically simplifies the emulated case, and limits the
damage for trapped accesses. This also brings some performance
back for NV.
Whilst we're at it, fix a comment that didn't quite capture why
we always set CNTVOFF_EL2 to 0 when disabling the virtual timer.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230112123829.458912-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When fully emulating a timer, we back it with a hrtimer that is
armver on vcpu_load(). However, we do this even if the timer is
already pending.
This causes spurious interrupts to be taken, though the guest
doesn't observe them (the interrupt is already pending).
Although this is a waste of precious cycles, this isn't the
end of the world with the current state of KVM. However, this
can lead to a situation where a guest doesn't make forward
progress anymore with NV.
Fix it by checking that if the timer is already pending
before arming a new hrtimer. Also drop the hrtimer cancelling,
which is useless, by construction.
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Fixes: bee038a674 ("KVM: arm/arm64: Rework the timer code to use a timer_map")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230112123829.458912-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
After many years of awesome service, the kvmarm mailing list hosted by
Columbia is being decommissioned, and replaced by kvmarm@lists.linux.dev.
Many thanks to Columbia for having hosted us for so long, and to the
kernel.org folks for giving us a new home.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230113132809.1979119-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Going forward I intend to help Marc with maintaining KVM/arm64. We've
spoken about this quite a bit and he has been a tremendous help in
ramping up to the task (thank you!). We haven't worked out the exact
details of how the process will work, but the goal is to even out the
maintenance responsibilities to give us both ample time for development.
To that end, updating the maintainers entry to reflect the change.
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230123210256.2728218-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Highlights:
- Fix false positive apple_gmux backlight detection on older
iGPU only MacBook models
- Various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix apple gmux detection
apple-gmux:
- Add apple_gmux_detect() helper
- Move port defines to apple-gmux.h
asus-wmi:
- Fix kbd_dock_devid tablet-switch reporting
dell-wmi:
- Add a keymap for KEY_MUTE in type 0x0010 table
gigabyte-wmi:
- add support for B450M DS3H WIFI-CF
hp-wmi:
- Fix cast to smaller integer type warning
- Handle Omen Key event
platform/x86/amd:
- pmc: Add a module parameter to disable workarounds
- pmc: Disable IRQ1 wakeup for RN/CZN
thinkpad_acpi:
- Fix profile modes on Intel platforms
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPShrkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yo5wgAlfTc6R4vZrtg5W8O5y2ZghMLTNLM
TsT5uzoFdz76xB62fh4RUPn4WWLftvKvOxXVTITSZe4rj3TR1voQM1vZedV6IcDX
6rFwMKpZDnerP5N07S7QlmGcDMIaFtsQGIjND6ZzcdS6RJRSdE/CcfyEO3IGgUxq
C1AWHm8Rh0Iq9ZdudFT5i7PXiFjCJyEZvRJXXFb1ZhDFdpCsfV/1lDx1D05/Hbk8
Ovm9yL3QXwxTbsIPZ7tgyDX0Uw/F7uaROGyNoo7LCxrY9ow0hfDV4KWO02+Dwf6n
Sl5rTwZZiQ13RL2h/3za05qFLemZ2o16xH7zntIuMuLkOzFPHF8Y7Gle5A==
=ryVq
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix false positive apple_gmux backlight detection on older iGPU only
MacBook models
- Various other small fixes and hardware-id additions
* tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
ACPI: video: Fix apple gmux detection
platform/x86: apple-gmux: Add apple_gmux_detect() helper
platform/x86: apple-gmux: Move port defines to apple-gmux.h
platform/x86: hp-wmi: Fix cast to smaller integer type warning
platform/x86/amd: pmc: Add a module parameter to disable workarounds
platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN
platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF
platform/x86: hp-wmi: Handle Omen Key event
platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table
In order to debug the kernel successfully with gdb you need to run
'make scripts_gdb' nowadays.
This was changed with the following commit:
Commit 67274c0834 ("scripts/gdb: delay generation of gdb
constants.py")
In order to have a complete guide for beginners this remark
should be added to the offial documentation.
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Link: https://lore.kernel.org/r/20230112-documentation-gdb-v2-1-292785c43dc9@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ay1Q
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer"
* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
docs: networking: Fix bridge documentation URL
tsnep: Fix TX queue stop/wake for multiple queues
net/tg3: resolve deadlock in tg3_reset_task() during EEH
net: mctp: mark socks as dead on unhash, prevent re-add
net: mctp: hold key reference when looking up a general key
net: mctp: move expiry timer delete to unhash
net: mctp: add an explicit reference from a mctp_sk_key to sock
net: ravb: Fix possible hang if RIS2_QFF1 happen
net: ravb: Fix lack of register setting after system resumed for Gen3
net/x25: Fix to not accept on connected socket
ice: move devlink port creation/deletion
sctp: fail if no bound addresses can be used for a given scope
net/sched: sch_taprio: do not schedule in taprio_reset()
Revert "Merge branch 'ethtool-mac-merge'"
netrom: Fix use-after-free of a listening socket.
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
...
Add leds-qcom-lpg to Documentation/leds/index.rst to fix the following
doc build warning.
Documentation/leds/leds-qcom-lpg.rst: WARNING: document isn't included in any toctree
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230125154426.12464-1-skhan@linuxfoundation.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
'remove' callbacks get called whenever a device is unbound from
the driver, which can get triggered from user space.
Putting it into the __exit section means that the function gets
dropped in for built-in drivers, as pointed out by this build
warning:
`tpda_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpda.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpda.o
`tpdm_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpdm.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpdm.o
Fixes: 5b7916625c ("Coresight: Add TPDA link driver")
Fixes: b3c71626a9 ("Coresight: Add coresight TPDM source driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230126163530.3495413-1-arnd@kernel.org
Add structure, introduction and Nodes section to Physical Memory
chapter.
As the new documentation references core-api/dma-api and mm/page_reclaim,
add page labels to those documents.
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230125192841.25342-2-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa1 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c43993777 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Code patching for the dynamically enabled shadow call stack comes down
to finding PACIASP and AUTIASP instructions -which behave as NOPs on
cores that do not implement pointer authentication- and converting them
into shadow call stack pushes and pops, respectively.
Due to past bad experiences with the highly complex and overengineered
DWARF standard that describes the unwind metadata that we are using to
locate these instructions, let's make this patching logic a little bit
more robust so that any issues with the unwind metadata detected at boot
time can de dealt with gracefully.
The DWARF annotations that are used for this are emitted at function
granularity, and due to the fact that the instructions we are patching
will simply behave as NOPs if left unpatched, we can abort on errors as
long as we don't leave any functions in a half-patched state.
So do a dry run of each FDE frame (covering a single function) before
performing the actual patching, and give up if the DWARF metadata cannot
be understood.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221213142849.1629026-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The INFO() macro defines an ID array and a couple of geometry
properties. Right now all its lines are duplicated twice because of the
INFO6() macro (for extended IDs) and soon as well we will need to add a
geometry parameter to include the number of banks.
In order to limit the code duplication, let's create a number of
intermediate macros which will facilitate defining high-level INFOX()
macros.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20221215081241.407098-2-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Ensure that the endianness used for populating the ID map matches the
endianness that the running kernel will be using, as this is no longer
guaranteed now that create_idmap() is invoked before init_kernel_el().
Note that doing so is only safe if the MMU is off, as switching the
endianness with the MMU on results in the active ID map to become
invalid. So also clear the M bit when toggling the EE bit in SCTLR, and
mark the MMU as disabled at boot.
Note that the same issue has resulted in preserve_boot_args() recording
the contents of registers X0 ... X3 in the wrong byte order, although
this is arguably a very minor concern.
Fixes: 32b135a7fa ("arm64: head: avoid cache invalidation when entering with the MMU on")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230125185910.962733-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.
There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.
For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cypress defines two flavors of configuration registers, volatile and
non volatile, and both use the same bit fields. Rename the bitfields in
the configuration registers so that they can be used for both flavors.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Link: https://lore.kernel.org/linux-mtd/20230110164703.83413-2-tudor.ambarus@linaro.org
CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
definition, stop using magic numbers and describe the missing bit fields
in CFR5 register. This is useful for both readability and future possible
addition of Octal STR mode support.
Fixes: c3266af101 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Cc: stable@vger.kernel.org
Reported-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/linux-mtd/20230110164703.83413-1-tudor.ambarus@linaro.org
spi-nor/core.c needs to include linux/delay.h,
or it would raise below compile warning:
drivers/mtd/spi-nor/core.c: In function ‘spi_nor_soft_reset’:
drivers/mtd/spi-nor/core.c:2779:2: error: implicit declaration of function ‘usleep_range’ [-Werror=implicit-function-declaration]
2779 | usleep_range(SPI_NOR_SRST_SLEEP_MIN, SPI_NOR_SRST_SLEEP_MAX);
| ^~~~~~~~~~~~
Fixes: d73ee7534c ("mtd: spi-nor: core: perform a Soft Reset on shutdown")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20220923031457.56103-1-zengheng4@huawei.com
Add a new LEGACY_DIRECT_IO config symbol that is only selected by the
file systems that still use the legacy blockdev_direct_IO code, so that
kernels without support for those file systems don't need to build the
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230125065839.191256-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sb_init_dio_done_wq is also used by the iomap code, so move it to
super.c in preparation for building direct-io.c conditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230125065839.191256-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We know that "irq < 0", so delete the unnecessary check.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/Y9JHSwcfdNcfMjjt@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
It looks like these checks were accidentally lost during the conversion to
fileattr API.
Fixes: 72227eac17 ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
(Randy Dunlap)
- Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
(Krzysztof Kozlowski)
- Improve the calibration routine by relying on the nvmem to read the
values and provide a set of fixes for the QCom tsens driver (Dmitry
Baryshkov)
- Remove the duplicate interrupt setting routine in the QCom tsens
driver (Daniel Lezcano)
- Fix a wrong loop condition in the i.MX SC thermal driver and add the
iMX8QM sensors (Viorel Suman)
- Fix header inclusion asm-generic.h by asm.h for the
qcom-spmi-adc-tm5 driver (Andy Shevchenko)
- Use the devm_platform_get_and_ioremap_resource() combo function in
all the drivers where the conversion applies (Ye Xingchen)
- Replace a literal mask by an existing corresponding macro (Yangtao
Li)
- Add support for MT7986 and MT7981 (Daniel Golle)
- Use thermal_zone_get_crit_temp() for the Armada thermal driver
(Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmPSo/wACgkQqDIjiipP
6E8jPAf/dSGd92V/BEbPDNL3OvhW7duX1g05HLwnjSLo4r2W/I+YFsmLkaJ81iPj
E/gC29jHw6TAQN9DrEMRnjmHGH8SBPrphfZMM7Sbh3pgzTPGW5tXQln8ysbh+JUr
0Aj4O6sA5mvcjd7r7u5JITGUHzZCm3L4Gv9bzr6O8M425u3di1PlI8XMsdaKBy5q
N4zYR8yFCgbgM3ujjy/J4fYWRRTcYQ9kExa/OxvMDtZS4shBK34VN9IVt3z/W+Vs
zNxKRynUZcVYddEZwYcBV+aTVAyFGLr5s5y6dzPo33h4M+Rl6reNE86el28fglu0
diZK79mef3KtV8Dn6lw9r+Fd/6heHw==
=ZJEq
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal-next
Pull thermal control material for 6.3-rc1 from Daniel Lezcano:
"- Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
(Randy Dunlap)
- Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
(Krzysztof Kozlowski)
- Improve the calibration routine by relying on the nvmem to read the
values and provide a set of fixes for the QCom tsens driver (Dmitry
Baryshkov)
- Remove the duplicate interrupt setting routine in the QCom tsens
driver (Daniel Lezcano)
- Fix a wrong loop condition in the i.MX SC thermal driver and add the
iMX8QM sensors (Viorel Suman)
- Fix header inclusion asm-generic.h by asm.h for the
qcom-spmi-adc-tm5 driver (Andy Shevchenko)
- Use the devm_platform_get_and_ioremap_resource() combo function in
all the drivers where the conversion applies (Ye Xingchen)
- Replace a literal mask by an existing corresponding macro (Yangtao
Li)
- Add support for MT7986 and MT7981 (Daniel Golle)
- Use thermal_zone_get_crit_temp() for the Armada thermal driver
(Daniel Lezcano)"
* tag 'thermal-v6.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (35 commits)
thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
thermal/drivers/mtk: Add support for MT7986 and MT7981
thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
thermal/drivers/sun8i: Convert to use macro
thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/kirkwood: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/thermal_mmio: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/rockchip: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/mtk_thermal: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/brcmstb_thermal: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
thermal/drivers/imx_sc_thermal: Fix the loop condition
thermal/drivers/qcom: Remove duplicate set next trip point interrupt code
thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
thermal/drivers/tsens: Drop single-cell code for msm8939
thermal/drivers/tsens: Drop single-cell code for mdm9607
...
Use correct function name in kernel-doc notation. (1)
Don't use "/**" to begin non-kernel-doc comments. (3)
Fixes these warnings:
fs/fuse/cuse.c:272: warning: expecting prototype for cuse_parse_dev_info(). Prototype was for cuse_parse_devinfo() instead
fs/fuse/dev.c:212: warning: expecting prototype for A new request is available, wake fiq(). Prototype was for fuse_dev_wake_and_unlock() instead
fs/fuse/dir.c:149: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Mark the attributes as stale due to an atime change. Avoid the invalidate if
fs/fuse/file.c:656: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* In case of short read, the caller sets 'pos' to the position of
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a fuse filesystem is mounted inside a container, there is a problem
during pid namespace destruction. The scenario is:
1. task (a thread in the fuse server, with a fuse file open) starts
exiting, does exit_signals(), goes into fuse_flush() -> wait
2. fuse daemon gets killed, tries to wake everyone up
3. task from 1 is stuck because complete_signal() doesn't wake it up, since
it has PF_EXITING.
The result is that the thread will never be woken up, and pid namespace
destruction will block indefinitely.
To add insult to injury, nobody is waiting for these return codes, since
the pid namespace is being destroyed.
To fix this, let's not block on flush operations when the current task has
PF_EXITING.
This does change the semantics slightly: the wait here is for posix locks
to be unlocked, so the task will exit before things are unlocked. To quote
Miklos:
"remote" posix locks are almost never used due to problems like this, so
I think it's safe to do this.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Link: https://lore.kernel.org/all/YrShFXRLtRt6T%2Fj+@risky/
Tested-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Permission to create an object (create, mkdir, symlink, mknod) needs to
take supplementary groups into account.
Add a supplementary group request extension. This can contain an arbitrary
number of group IDs and can be added to any request. This extension is not
added to any request by default.
Add FUSE_CREATE_SUPP_GROUP init flag to enable supplementary group info in
creation requests. This adds just a single supplementary group that
matches the parent group in the case described above. In other cases the
extension is not added.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main request. It has a header indicating the size and type
of the extension.
The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.
Add the total extension length to the request header. The offset of the
extension block within the request can be calculated by:
inh->len - inh->total_extlen * 8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The devm_memremap() function doesn't return NULL, it returns error
pointers.
Fixes: 9a10c7e651 ("drm/simpledrm: Add support for system memory framebuffers")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9JHzImRcUaa0mi1@kili
numFiles entry in LVID should actually contain number for non-dir file
entries, not the number of non-dir inodes. Move the counting from inode
allocation / deallocation into directory entry handling functions.
Signed-off-by: Jan Kara <jack@suse.cz>
