We take the BTF reference before we register dtors and we need
to put it back when it's done.
We probably won't se a problem with kernel BTF, but module BTF
would stay loaded (because of the extra ref) even when its module
is removed.
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 5ce937d613 ("bpf: Populate pairs of btf_id and destructor kfunc in btf")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230120122148.1522359-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a device ID table so that the driver loads automatically when the
associated platform_device gets registered.
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Link: https://lore.kernel.org/r/20230118150904.26913-3-manivannan.sadhasivam@linaro.org
Currently it is possible that the final put of a KVM reference comes from
vfio during its device close operation. This occurs while the vfio group
lock is held; however, if the vfio device is still in the kvm device list,
then the following call chain could result in a deadlock:
VFIO holds group->group_lock/group_rwsem
-> kvm_put_kvm
-> kvm_destroy_vm
-> kvm_destroy_devices
-> kvm_vfio_destroy
-> kvm_vfio_file_set_kvm
-> vfio_file_set_kvm
-> try to hold group->group_lock/group_rwsem
The key function is the kvm_destroy_devices() which triggers destroy cb
of kvm_device_ops. It calls back to vfio and try to hold group_lock. So
if this path doesn't call back to vfio, this dead lock would be fixed.
Actually, there is a way for it. KVM provides another point to free the
kvm-vfio device which is the point when the device file descriptor is
closed. This can be achieved by providing the release cb instead of the
destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release().
/*
* Destroy is responsible for freeing dev.
*
* Destroy may be called before or after destructors are called
* on emulated I/O regions, depending on whether a reference is
* held by a vcpu or other kvm component that gets destroyed
* after the emulated I/O.
*/
void (*destroy)(struct kvm_device *dev);
/*
* Release is an alternative method to free the device. It is
* called when the device file descriptor is closed. Once
* release is called, the destroy method will not be called
* anymore as the device is removed from the device list of
* the VM. kvm->lock is held.
*/
void (*release)(struct kvm_device *dev);
Fixes: 421cfe6596 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com
Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com
[aw: update comment as well, s/destroy/release/]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add VI6_IP_VERSION_SOC_V4H so that we can identify V4H SoC.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
V3U is actually gen4, not gen3. The same IP is also used in the
(not-yet-supported) V4H.
Change VI6_IP_VERSION_MODEL_VSPD_V3U to VI6_IP_VERSION_MODEL_VSPD_GEN4,
to represent the model correctly. V3U and V4H can still be
differentiated, if needed, with the VI6_IP_VERSION_SOC_xxx.
Also mark VI6_IP_VERSION_MODEL_VSPD_GEN4 as gen 4 in vsp1_device_info,
and update the code to correctly match for gen 4.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
-----BEGIN PGP SIGNATURE-----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=u9Pc
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)"
* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
HSA/HBP/HFP/HSE mode bits in Processor Reference Manuals specify
a naming conversion as 'disable mode bit' due to its bit definition,
0 = Enable and 1 = Disable.
For HSE bit, the i.MX 8M Mini/Nano/Plus Applications Processor
Reference Manual named this bit as 'HseDisableMode' but the bit
definition is quite opposite like
0 = Disables transfer
1 = Enables transfer
which clearly states that HSE is not a disable bit.
HSE is named as per the manual even though it is not a disable
bit however the driver logic for handling HSE is based on the
MIPI_DSI_MODE_VIDEO_HSE flag itself.
Cc: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-2-jagan@amarulasolutions.com
HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies
0 = Enable and 1 = Disable.
The logic for checking these mode flags was correct before
the MIPI_DSI*_NO_* mode flag conversion.
This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling
Exynos DSI host and update the mode_flags in relevant panel drivers.
Fixes: 0f3b68b66a ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features")
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com
Add a test that generates SSVE and ZA context in a single signal frame to
ensure that nothing is going wrong in that case for any reason.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230117-arm64-test-ssve-za-v1-2-203c00150154@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There's a stray comment in the MTE test Makefile which documents
something that's since been removed, delete it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-6-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The assembly portions of the MTE selftests need to be built with a
toolchain supporting MTE. Since we support GCC versions that lack MTE
support we have logic to suppress build of these tests when using such a
toolchain but that logic is broken for LLVM=1 builds, it uses CC but CC
is only set for LLVM builds in libs.mk which needs to be included after
we have selected which test programs to build.
Since all supported LLVM versions support MTE we can simply assume MTE
support when LLVM is set. This is not a thing of beauty but it does the
job.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-5-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When building with clang the toolchain refuses to link the signals
testcases since the assembly code has a reference to current which has
no initialiser so is placed in the BSS:
/tmp/signals-af2042.o: in function `fake_sigreturn':
<unknown>:51:(.text+0x40): relocation truncated to fit: R_AARCH64_LD_PREL_LO19 against symbol `current' defined in .bss section in /tmp/test_signals-ec1160.o
Since the first statement in main() initialises current we may as well
fix this by moving the initialisation to build time so the variable
doesn't end up in the BSS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-4-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The signal Makefile rules pass all the dependencies for each executable,
including headers, to the compiler which GCC is happy enough with but
clang rejects:
clang --target=aarch64-none-linux-gnu -fintegrated-as -Wall -O2 -g -I/home/broonie/git/linux/tools/testing/selftests/ -isystem /home/broonie/git/linux/usr/include -D_GNU_SOURCE -std=gnu99 -I. test_signals.c test_signals_utils.c testcases/testcases.c signals.S testcases/fake_sigreturn_bad_magic.c test_signals.h test_signals_utils.h testcases/testcases.h -o testcases/fake_sigreturn_bad_magic
clang: error: cannot specify -o when generating multiple output files
This happens because clang gets confused about what to do with the
header files, failing to identify them as source. This is not amazing
behaviour on clang's part and should ideally be fixed but even if that
happens we'd still need a new clang release so let's instead rework the
Makefile so we use variables for the lists of header and source files,
allowing us to only pass the source files to the compiler and keep clang
happy.
As a bonus the resulting Makefile is a bit easier to read.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-3-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are a number of freestanding static executables used in floating
point testing that have no runtime at all. These all define the main entry
point as:
.globl _start
function _start
_start:
but clang's integrated assembler complains that:
error: symbol '_start' is already defined
due to having both a label and function directive. Remove the label to
allow building with clang.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-2-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The .pushsection directive used to store the strings used with the .puts
macro in the floating point helpers does not provide a section type but
according to the gas documentation this should be mandatory and with the
clang built in as it actually is. Provide one so that we can build these
tests with LLVM=1.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-clang-v1-1-89c69d377727@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This hwcap was added for 32-bit native arm kernel by commit fea53546be
("ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe") and hence
the corresponding changes added in 32-bit compat arm64 for similar user
interfaces.
Speculative Store Bypass Safe is a feature(FEAT_SSBS) present in
AArch32/AArch64 state for Armv8 and can be identified by PFR2.SSBS
identification register. This hwcap is already advertised in native arm64
kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-8-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This hwcap was added for 32-bit native arm kernel by commit
3bda6d8848 ("ARM: 9273/1: Add hwcap for Speculation Barrier(SB)")
and hence the corresponding changes added in 32-bit compat arm64 kernel.
Speculation Barrier is a feature(FEAT_SB) present in both AArch32 and
AArch64 state. This hwcap is already advertised in native arm64 kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-7-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This hwcap was added earlier for 32-bit native arm kernel by commit
956ca3a4eb ("ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM") and hence
the corresponding changes added in 32-bit compat arm64 kernel for similar
user interfaces.
Int8 matrix multiplication is a feature (FEAT_AA32I8MM) present in AArch32
state of Armv8 and is identified by ISAR6.I8MM register. Similar
feature(FEAT_I8MM) exist for AArch64 state and is already advertised in
arm64 kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-6-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This hwcap was added earlier for 32-bit native arm kernel by commit
23b6d4ad6e ("ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16") and hence
the corresponding changes added in 32-bit compat arm64 kernel.
Brain 16-bit floating-point storage format is a feature (FEAT_AA32BF16)
present in AArch32 state for Armv8 and is represented by ISAR6.BF16
identification register. Similar feature (FEAT_BF16) exist for AArch64
state and is already advertised in native arm64 kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-5-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This hwcap was added earlier for 32-bit native arm kernel by commit
ce4835497c ("ARM: 9270/1: vfp: Add hwcap for FEAT_FHM") and hence the
corresponding changes added in 32-bit compat arm64 kernel for similar user
interfaces.
Floating-point half-precision multiplication (FHM) is a feature present
in AArch32/AArch64 state for Armv8. This hwcap is already advertised in
native arm64 kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-4-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This hwcap was added earlier for 32-bit native arm kernel by commit
62ea0d873a ("ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd") and hence the
corresponding changes added in 32-bit compat arm64 kernel for similar user
interfaces.
Advanced Dot product is a feature (FEAT_DotProd) present in both
AArch32/AArch64 state for Armv8 and is already advertised in native arm64
kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-3-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
These hwcaps were added earlier for 32-bit native arm kernel by commit
c00a19c8b1 ("ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16")
and hence the corresponding changes added in 32-bit compat arm64 kernel for
similar userspace interfaces.
Floating point half-precision (FPHP) and Advanced SIMD half-precision
(ASIMDHP) represents the Armv8 FP16 feature extension and is already
advertised in native arm64 kernel.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111053706.13994-2-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.
Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)
While at it, fold a mov/add/mov sequence into a single add.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230109174800.3286265-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230109174800.3286265-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Explain more in detail how the per-channel <m> identifier is chosen.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230120122326.1932614-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
'gpios' is in general preferred even for single GPIO specifiers and
there are DTS boards using it (exynos4412-p4note.dtsi), so allow both
versions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120133010.299797-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The samsung,ext-control-gpios property was lost during conversion to DT
schema:
exynos3250-artik5-eval.dtb: pmic@66: regulators:LDO11: Unevaluated properties are not allowed ('samsung,ext-control-gpios' was unexpected)
Fixes: ea98b9eba0 ("regulator: dt-bindings: samsung,s2m: convert to dtschema")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120131447.289702-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the swidget is NULL we skip the preparing of the widget and jump to
handle the sink path of the widget.
If the prepare fails in this case we would undo the prepare but the swidget
is NULL (we skipped the prepare for the widget).
To avoid NULL pointer dereference in this case we must check swidget
against NULL pointer once again.
Fixes: 0ad84b11f2 ("ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230120102125.30653-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:
This series addresses problems with echo reference devices
reported in:
"[BUG][ADL-N] Kernel panic when echo reference stream is opened"
https://github.com/thesofproject/linux/issues/4083
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should
be 12, not 13.
Cc: stable <stable@kernel.org>
Fixes: 17a8271658 ("USB: iowarrior: fix up report size handling for some devices")
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1b17df9973.
It causes merge issues in linux-next and was asked to be dropped from
this tree.
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Cc: Wayne Chang <waynec@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/Y8lEhwT3VWEn9w+R@orome
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the error path after calling dev_set_name(), the device
name is leaked. To fix this, calling dev_set_name() before
device_register(), and call put_device() if it returns error.
All the resources is released in powercap_release(), so it
can return from powercap_register_zone() directly.
Fixes: 75d2364ea0 ("PowerCap: Add class driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kernel-doc complains about multiple occurrences of "/**" being used
for something that is not a kernel-doc comment, so change all of these
to just use "/*" comment style.
The warning message for all of these is:
FILE:LINE: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
kernel/power/swap.c:585: warning: ...
Structure used for CRC32.
kernel/power/swap.c:600: warning: ...
* CRC32 update function that runs in its own thread.
kernel/power/swap.c:627: warning: ...
* Structure used for LZO data compression.
kernel/power/swap.c:644: warning: ...
* Compression function that runs in its own thread.
kernel/power/swap.c:952: warning: ...
* The following functions allow us to read data using a swap map
kernel/power/swap.c:1111: warning: ...
* Structure used for LZO data decompression.
kernel/power/swap.c:1127: warning: ...
* Decompression function that runs in its own thread.
Also correct one spello/typo.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit ca07e1c1e4 ("drivers:usb:fsl:Make fsl ehci drv an independent
driver module") changed DRV_NAME which was used for MODULE_ALIAS as well.
Starting from this the module alias didn't match the platform device
name created in fsl-mph-dr-of.c
Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of.
This is needed for module autoloading on ls1021a.
Fixes: ca07e1c1e4 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KASAN reported a null-ptr-deref error:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 1373 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:dmi_sysfs_entry_release
...
Call Trace:
<TASK>
kobject_put
dmi_sysfs_register_handle (drivers/firmware/dmi-sysfs.c:540) dmi_sysfs
dmi_decode_table (drivers/firmware/dmi_scan.c:133)
dmi_walk (drivers/firmware/dmi_scan.c:1115)
dmi_sysfs_init (drivers/firmware/dmi-sysfs.c:149) dmi_sysfs
do_one_initcall (init/main.c:1296)
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x4000000 from 0xffffffff81000000
---[ end Kernel panic - not syncing: Fatal exception ]---
It is because previous patch added kobject_put() to release the memory
which will call dmi_sysfs_entry_release() and list_del().
However, list_add_tail(entry->list) is called after the error block,
so the list_head is uninitialized and cannot be deleted.
Move error handling to after list_add_tail to fix this.
Fixes: 660ba678f9 ("firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221111015326.251650-2-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously support for GNSS was implemented as a TTY driver, it allowed
to access GNSS receiver on /dev/ttyGNSS_<bus><func>.
Use generic GNSS subsystem API instead of implementing own TTY driver.
The receiver is accessible on /dev/gnss<id>. In case of multiple receivers
in the OS, correct device can be found by enumerating either:
- /sys/class/net/<eth port>/device/gnss/
- /sys/class/gnss/gnss<id>/device/
Using GNSS subsystem is superior to implementing own TTY driver, as the
GNSS subsystem was designed solely for this purpose. It also implements
TTY driver but in a common and defined way.
From user perspective, there is no difference in communicating with a
device, except new path to the device shall be used. The device will
provide same information to the userspace as the old one, and can be used
in the same way, i.e.:
old # gpsmon /dev/ttyGNSS_2100_0
new # gpsmon /dev/gnss0
There is no other impact on userspace tools.
User expecting onboard GNSS receiver support is required to enable
CONFIG_GNSS=y/m in kernel config.
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The acpi_evaluate_dsm_typed() provides a way to check the type of the
object evaluated by _DSM call. Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ACPI part of a driver is optional the methods used in it
are expected to be available even if CONFIG_ACPI=n. This is not
the case for _DSM related methods. Add stubs for
acpi_evaluate_dsm_typed() and acpi_check_dsm() methods.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: eb8329e0a0 ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The normal call sequence of using transport class is:
Add path:
transport_setup_device()
transport_setup_classdev() // call sas_host_setup() here
transport_add_device() // if fails, need call transport_destroy_device()
transport_configure_device()
Remove path:
transport_remove_device()
transport_remove_classdev // call sas_host_remove() here
transport_destroy_device()
If transport_add_device() fails, need call transport_destroy_device()
to free memory, but in this case, ->remove() is not called, and the
resources allocated in ->setup() are leaked. So fix these leaks by
calling ->remove() in transport_add_class_device() if it returns error.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115031638.3816551-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current some drivers(like iscsi) call transport_register_device()
failed, they don't call transport_destroy_device() to release the
memory allocated in transport_setup_device(), because they don't
know what was done, it should be internal thing to release the
resource in register function. So fix this leak by calling destroy
function inside register function.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110102307.3492557-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accessing AA64MMFR1_EL1 is expensive in KVM guests, since it is emulated
in the hypervisor. In fact, ARM documentation mentions some feature
registers are not supposed to be accessed frequently by the OS, and
therefore should be emulated for guests [1].
Commit 0388f9c743 ("arm64: mm: Implement
arch_wants_old_prefaulted_pte()") introduced a read of this register in
the page fault path. But, even when the feature of setting faultaround
pages with the old flag is disabled for a given cpu, we are still paying
the cost of checking the register on every pagefault. This results in an
explosion of vmexit events in KVM guests, which directly impacts the
performance of virtualized workloads. For instance, running kernbench
yields a 15% increase in system time solely due to the increased vmexit
cycles.
This patch avoids the extra cost by using the sanitized cached value.
It should be safe to do so, since this register mustn't change for a
given cpu.
[1] https://developer.arm.com/-/media/Arm%20Developer%20Community/PDF/Learn%20the%20Architecture/Armv8-A%20virtualization.pdf?revision=a765a7df-1a00-434d-b241-357bfda2dd31
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230109151955.8292-1-krisman@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
struct acpi_pld_info *pld should be freed before the return of allocation
failure, to prevent memory leak, add the ACPI_FREE() to fix it.
Fixes: bc443c31de ("driver core: location: Check for allocations failure")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669102648-11517-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling kobject_add() failed in device_add(), it will call
cleanup_glue_dir() to free resource. But in kobject_add(),
dev->kobj.parent has been set to NULL. This will cause resource leak.
The process is as follows:
device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add() //kobject_get()
...
dev->kobj.parent = kobj;
...
kobject_add() //failed, but set dev->kobj.parent = NULL
...
glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto
//"Error" label
...
cleanup_glue_dir() //becaues glue_dir is NULL, not call
//kobject_put()
The preceding problem may cause insmod mac80211_hwsim.ko to failed.
sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim'
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x224/0x280
kobject_add_internal+0x2aa/0x880
kobject_add+0x135/0x1a0
get_device_parent+0x3d7/0x590
device_add+0x2aa/0x1cb0
device_create_groups_vargs+0x1eb/0x260
device_create+0xdc/0x110
mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim]
init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim]
do_one_initcall+0x10f/0x630
do_init_module+0x19f/0x5e0
load_module+0x64b7/0x6eb0
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to
register things with the same name in the same directory.
Fixes: cebf8fd169 ("driver core: fix race between creating/querying glue dir and its cleanup")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221123012042.335252-1-shaozhengchao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
