Allow gpio-line-names property (quite commonly used) and constrain
gpio-reserved-ranges:
sm8350-sony-xperia-sagami-pdx215.dtb: pinctrl@f100000: 'gpio-line-names' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.
Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.946630819@infradead.org
Allow bias-bus-hold and input-enable properties (already used in
SC8280XP LPASS LPI nodes):
sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20221230135645.56401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Doing RCU-idle outside the driver, only to then teporarily enable it
again before going idle is suboptimal.
Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.883561913@infradead.org
SC8280XP LPASS LPI pin controller has GPIO 0-18:
sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
'gpio2' does not match '^gpio([0-1]|1[0-8])$'
Fixes: 958bb025f5 ("dt-bindings: pinctrl: qcom: Add sc8280xp lpass lpi pinctrl bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably both cpu_pm_enter() and cpu_cluster_pm_enter() implicity
re-enable RCU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.821714572@infradead.org
Recently AMT mode was enabled (somewhat unexpectedly) on the Lenovo
Z13 platform. The FW is advertising it is available and the driver tries
to use it - unfortunately it reports the profile mode incorrectly.
Note, there is also some extra work needed to enable the dynamic aspect
of AMT support that I will be following up with; but more testing is
needed first. This patch just fixes things so the profiles are reported
correctly.
Link: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/issues/115
Fixes: 46dcbc61b7 ("platform/x86: thinkpad-acpi: Add support for automatic mode transitions")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230112221228.490946-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Traversing the Perf Domains requires rcu_read_lock() to be held and is
conditional on sched_energy_enabled(). Ensure right protections applied.
Also skip capacity inversion detection for our own pd; which was an
error.
Fixes: 44c7b80bff ("sched/fair: Detect capacity inversion")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230112122708.330667-3-qyousef@layalina.io
The node names should be generic and DT schema expects certain pattern:
hisilicon/hi3660-hikey960.dtb: leds: wlan_active_led: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)
Link: https://lore.kernel.org/r/20221125144140.477225-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The node names should be generic and DT schema expects certain pattern:
at91-sama5d2_ptc_ek.dtb: leds: 'blue', 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20221125144131.477089-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The node names should be generic and DT schema expects certain pattern:
dove-cubox.dtb: leds: 'power' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20221125144125.477032-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The node names should be generic and DT schema expects certain pattern:
keystone-k2hk-evm.dtb: leds: 'debug1_1', 'debug1_2', 'debug2', 'debug3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20221125144123.477005-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add 2 tracepoints to monitor the tcp/udp traffic
of per process and per cgroup.
Regarding monitoring the tcp/udp traffic of each process, there are two
existing solutions, the first one is https://www.atoptool.nl/netatop.php.
The second is via kprobe/kretprobe.
Netatop solution is implemented by registering the hook function at the
hook point provided by the netfilter framework.
These hook functions may be in the soft interrupt context and cannot
directly obtain the pid. Some data structures are added to bind packets
and processes. For example, struct taskinfobucket, struct taskinfo ...
Every time the process sends and receives packets it needs multiple
hashmaps,resulting in low performance and it has the problem fo inaccurate
tcp/udp traffic statistics(for example: multiple threads share sockets).
We can obtain the information with kretprobe, but as we know, kprobe gets
the result by trappig in an exception, which loses performance compared
to tracepoint.
We compared the performance of tracepoints with the above two methods, and
the results are as follows:
ab -n 1000000 -c 1000 -r http://127.0.0.1/index.html
without trace:
Time per request: 39.660 [ms] (mean)
Time per request: 0.040 [ms] (mean, across all concurrent requests)
netatop:
Time per request: 50.717 [ms] (mean)
Time per request: 0.051 [ms] (mean, across all concurrent requests)
kr:
Time per request: 43.168 [ms] (mean)
Time per request: 0.043 [ms] (mean, across all concurrent requests)
tracepoint:
Time per request: 41.004 [ms] (mean)
Time per request: 0.041 [ms] (mean, across all concurrent requests
It can be seen that tracepoint has better performance.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Signed-off-by: Xiongchun Duan <duanxiongchun@bytedance.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Palmas says:
====================
net: add tx packets aggregation to ethtool and rmnet
Hello maintainers and all,
this patchset implements tx qmap packets aggregation in rmnet and generic
ethtool support for that.
Some low-cat Thread-x based modems are not capable of properly reaching the maximum
allowed throughput both in tx and rx during a bidirectional test if tx packets
aggregation is not enabled.
I verified this problem with rmnet + qmi_wwan by using a MDM9207 Cat. 4 based modem
(50Mbps/150Mbps max throughput). What is actually happening is pictured at
https://drive.google.com/file/d/1gSbozrtd9h0X63i6vdkNpN68d-9sg8f9/view
Testing with iperf TCP, when rx and tx flows are tested singularly there's no issue
in tx and minor issues in rx (not able to reach max throughput). When there are concurrent
tx and rx flows, tx throughput has an huge drop. rx a minor one, but still present.
The same scenario with tx aggregation enabled is pictured at
https://drive.google.com/file/d/1jcVIKNZD7K3lHtwKE5W02mpaloudYYih/view
showing a regular graph.
This issue does not happen with high-cat modems (e.g. SDX20), or at least it
does not happen at the throughputs I'm able to test currently: maybe the same
could happen when moving close to the maximum rates supported by those modems.
Anyway, having the tx aggregation enabled should not hurt.
The first attempt to solve this issue was in qmi_wwan qmap implementation,
see the discussion at https://lore.kernel.org/netdev/20221019132503.6783-1-dnlplm@gmail.com/
However, it turned out that rmnet was a better candidate for the implementation.
Moreover, Greg and Jakub suggested also to use ethtool for the configuration:
not sure if I got their advice right, but this patchset add also generic ethtool
support for tx aggregation.
The patches have been tested mainly against an MDM9207 based modem through USB
and SDX55 through PCI (MHI).
v2 should address the comments highlighted in the review: the implementation is
still in rmnet, due to Subash's request of keeping tx aggregation there.
v3 fixes ethtool-netlink.rst content out of table bounds and a W=1 build warning
for patch 2.
v4 solves a race related to egress_agg_params.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ETHTOOL_COALESCE_TX_AGGR for configuring the tx
aggregation settings.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tx packets aggregation.
Bidirectional TCP throughput tests through iperf with low-cat
Thread-x based modems revelead performance issues both in tx
and rx.
The Windows driver does not show this issue: inspecting USB
packets revealed that the only notable change is the driver
enabling tx packets aggregation.
Tx packets aggregation is by default disabled and can be enabled
by increasing the value of ETHTOOL_A_COALESCE_TX_MAX_AGGR_FRAMES.
The maximum aggregated size is by default set to a reasonably low
value in order to support the majority of modems.
This implementation is based on patches available in Code Aurora
repositories (msm kernel) whose main authors are
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following ethtool tx aggregation parameters:
ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES
Maximum size in bytes of a tx aggregated block of frames.
ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES
Maximum number of frames that can be aggregated into a block.
ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS
Time in usecs after the first packet arrival in an aggregated
block for the block to be sent.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge an ACPI resource management quirk and an ACPI backlight driver fix
for 6.2-rc4:
- Skip ACPI IRQ override on Asus Expertbook B2402CBA (Tamim Khan).
- Add missing support for manual selection of NVidia-WMI-EC or Apple
GMUX backlight in the kernel command line to the ACPI backlight
driver (Hans de Goede).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA
* acpi-video:
ACPI: video: Allow selecting NVidia-WMI-EC or Apple GMUX backlight from the cmdline
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.760296658@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing RCU_NONIDLE().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.699546331@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
That is, once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.637185846@infradead.org
Make cpuidle_enter_state() consistent with the s2idle variant and
verify ->enter() always returns with interrupts disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.576412812@infradead.org
Make cpuidle_state::enter() methods IRQ state invariant on exit.
Additionally make sure to use raw_local_irq_*() methods since this
cpuidle callback will be called with RCU already disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.515253662@infradead.org
Typical boot time setup; no need to suffer an indirect call for that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.453613251@infradead.org
The perf_lopwr_cb() function is called from the idle routines; there
is no RCU there, we must not enter tracing.
Use __always_inline, noidle annotations and existing no-trace methods.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.392862891@infradead.org
The LKGS instruction atomically loads a segment descriptor into the
%gs descriptor registers, *except* that %gs.base is unchanged, and the
base is instead loaded into MSR_IA32_KERNEL_GS_BASE, which is exactly
what we want this function to do.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230112072032.35626-6-xin3.li@intel.com
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
This commit implements message parser for Fireface 400 to pass data of
knob control to user space. The parser has FIFO which can store maximum
32 events without no overrun detection since it doesn't matter to lose
the event.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds local framework to message parser. This is preparation
for future work to pass event of knob control for Fireface 400 to user
space.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The time stamp of isochronous cycle at which asynchronous transaction is
sent is perhaps useful somehow. A commit b2405aa948 ("firewire: add
kernel API to access packet structure in request structure for AR context")
adds kernel API to retrieve the time stamp in inner structure of request
subaction.
This commit changes local framework to handle message delivered by the
asynchronous transaction so that time stamp is picked up by the kernel API.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's cleared that Fireface 400 transmits quadlet message for two purposes
at least; received MIDI messages and notification of knob control
operation. Nevertheless current implementation uses callback function name
just for MIDI messages.
This commit renames the callback functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230112120954.500692-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked these drivers obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
3dfx Glide-->driver/gpu/drm/tdfx
Matrox-->driver/gpu/drm/mga
Intel i810-->driver/gpu/drm/i810
S3 Savage-->drivers/gpu/drm/savage
ATI Rage 128->drivers/gpu/drm/r128
Silicon Integrated Systems->drivers/gpu/drm/sis
It's time to remove these drivers.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-11-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked these drivers obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
3dfx Glide-->driver/gpu/drm/tdfx
Matrox-->driver/gpu/drm/mga
Intel i810-->driver/gpu/drm/i810
S3 Savage-->drivers/gpu/drm/savage
ATI Rage 128->drivers/gpu/drm/r128
Silicon Integrated Systems->drivers/gpu/drm/sis
VIA Unichrome->drivers/gpu/drm/via
It's time to remove these drivers.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-10-cai.huoqing@linux.dev
Add comments to avoid removing DRM_LEGACY config menu,
because DRM_LEGACY menu could list other legacy drivers.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-9-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked via driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
VIA Unichrome->drivers/gpu/drm/via
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-8-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked tdfx driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
3dfx Glide-->driver/gpu/drm/tdfx
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-7-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked sis driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Silicon Integrated Systems->drivers/gpu/drm/sis
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-6-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked savage driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
S3 Savage-->drivers/gpu/drm/savage
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-5-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked r128 driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
ATI Rage 128->drivers/gpu/drm/r128
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-4-cai.huoqing@linux.dev
Commit 399516ab0f ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers")
marked mga driver obsolete 7 years ago.
And the mesa UMD of this drm driver already in deprecated list
in the link: https://docs.mesa3d.org/systems.html
Matrox-->driver/gpu/drm/mga
It's time to remove this driver.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221203102502.3185-3-cai.huoqing@linux.dev
