Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221125083114.67e7f83c@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
The Flash Interface Unit (FIU) is the SPI flash controller in the
Nuvoton WPCM450 BMC SoC. It supports four chip selects, and direct
(memory-mapped) access to 16 MiB per chip. Larger flash chips can be
accessed by software-defined SPI transfers.
The FIU in newer NPCM7xx SoCs is not compatible with the WPCM450 FIU.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221124191400.287918-2-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Besides software controlled SPI transfers (UMA, "user mode access"), FIU
also supports a 16 MiB mapping window per attached flash chip.
This patch implements direct mapped read access, to speed up flash reads.
Without direct mapping:
# time dd if=/dev/mtd0ro of=dump bs=1M
16+0 records in
16+0 records out
real 1m 47.74s
user 0m 0.00s
sys 1m 47.75s
With direct mapping:
# time dd if=/dev/mtd0ro of=dump bs=1M
16+0 records in
16+0 records out
real 0m 30.81s
user 0m 0.00s
sys 0m 30.81s
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221124191400.287918-4-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The Flash Interface Unit (FIU) is the SPI flash controller in the
Nuvoton WPCM450 BMC SoC. It supports four chip selects, and direct
(memory-mapped) access to 16 MiB per chip. Larger flash chips can be
accessed by software-defined SPI transfers.
The FIU in newer NPCM7xx SoCs is not compatible with the WPCM450 FIU.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221124191400.287918-3-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
This partially reverts
6c16fe3c16 ("io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()")
The redundancy of __io_cq_unlock_post() was always to keep it inlined
into __io_submit_flush_completions(). Inline it back and rename with
hope of clarifying the intention behind it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/372a16c485fca44c069be2e92fc5e7332a1d7fd7.1669310258.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we're handling IOPOLL completions more generically, get rid uses of
_post() and send requests through the normal path. It may have some
extra mertis performance wise, but we don't care much as there is a
better interface for selected buffers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4deded706587f55b006dc33adf0c13cfc3b2319f.1669310258.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Until now there was no reason for multishot polled requests to defer
completions as there was no functional difference. However now this will
actually defer the completions, for a performance win.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-10-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only call sites which would not allow overflow are also call sites
which would use the io_aux_cqe as they care about ordering.
So remove this parameter from io_post_aux_cqe.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-9-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the just introduced deferred post cqe completion state when possible
in io_aux_cqe. If not possible fallback to io_post_aux_cqe.
This introduces a complication because of allow_overflow. For deferred
completions we cannot know without locking the completion_lock if it will
overflow (and even if we locked it, another post could sneak in and cause
this cqe to be in overflow).
However since overflow protection is mostly a best effort defence in depth
to prevent infinite loops of CQEs for poll, just checking the overflow bit
is going to be good enough and will result in at most 16 (array size of
deferred cqes) overflows.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-6-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Multishot ops cannot use the compl_reqs list as the request must stay in
the poll list, but that means they need to run each completion without
benefiting from batching.
Here introduce batching infrastructure for only small (ie 16 byte)
CQEs. This restriction is ok because there are no use cases posting 32
byte CQEs.
In the ring keep a batch of up to 16 posted results, and flush in the same
way as compl_reqs.
16 was chosen through experimentation on a microbenchmark ([1]), as well
as trying not to increase the size of the ring too much. This increases
the size to 1472 bytes from 1216.
[1]: 9ac66b36bc
Run with $ make -j && ./benchmark/reg.b -s 1 -t 2000 -r 10
Gives results:
baseline 8309 k/s
8 18807 k/s
16 19338 k/s
32 20134 k/s
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-5-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All failures happen under lock now, and can be deferred. To be consistent
when the failure has happened after some multishot cqe has been
deferred (and keep ordering), always defer failures.
To make this obvious at the caller (and to help prevent a future bug)
rename io_req_complete_failed to io_req_defer_failed.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-4-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is required for the failure case (io_req_complete_failed) and is
missing.
The alternative would be to only lock in the failure path, however all of
the non-error paths in io_poll_check_events that do not do not return
IOU_POLL_NO_ACTION end up locking anyway. The only extraneous lock would
be for the multishot poll overflowing the CQE ring, however multishot poll
would probably benefit from being locked as it will allow completions to
be batched.
So it seems reasonable to lock always.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-3-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we now flush output immediately on starting children we should ensure
that the child name is set beforehand so that any output that does get
flushed from the newly created child has the name of the child attached.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221124120722.150988-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Some configurations (i.e., 64k + LVA/LPA) can tolerate a physical
placement of the kernel image outside of the 48-bit addressable region,
but given that the loader has no way of knowing whether or not the image
in question supports LVA/LPA, it currently has no choice but to place it
below the 48-bit mark.
Once we add support for LPA2, which allows 52-bit physical and virtual
addressing when using 4k or 16k pages, but in way that relies on
increasing the number of paging levels, there will be more variety in
the configurations that may or may not support this.
So redefine bit #3 in the Image header as 'must be placed within 48-bit
addressable memory', as this is the current de facto meaning.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221122170249.2453853-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
There are no longer any users of the assembler macros for saving and
restoring DAIF so remove them to prevent further users being added, there
are C equivalents available.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221123180209.634650-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We really don't want to take an exception while replacing TTBR1 so we mask
DAIF during the actual update. Currently this is done in the assembly
function idmap_cpu_replace_ttbr1() but it could equally be done in the only
caller of that function, cpu_replace_ttbr1(). This simplifies the assembly
code slightly and means that when working with the code around masking DAIF
flags there is one less piece of assembly code which needs to be considered.
While we're at it add a comment which makes explicit why we are masking
DAIF in this code.
There should be no functional effect.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221123180209.634650-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
If CONFIG_SWP_EMULATION is not set and
CONFIG_CP15_BARRIER_EMULATION is not set,
aarch64-linux-gnu complained about unused-function :
arch/arm64/kernel/armv8_deprecated.c:67:21: error: ‘aarch32_check_condition’ defined but not used [-Werror=unused-function]
static unsigned int aarch32_check_condition(u32 opcode, u32 psr)
^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To fix this warning, modify aarch32_check_condition() with __maybe_unused.
Fixes: 0c5f416219 ("arm64: armv8_deprecated: move aarch32 helper earlier")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221124022429.19024-1-renzhijie2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The build test robot pointer out that there's a build failure when:
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n
... due to some mismatched ifdeffery, some of which checks
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, and some of which checks
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, leading to some missing definitions expected
by the core code when CONFIG_DYNAMIC_FTRACE=n and consequently
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=n.
There's really not much point in supporting CONFIG_DYNAMIC_FTRACE=n (AKA
static ftrace). All supported toolchains allow us to implement
DYNAMIC_FTRACE, distributions all prefer DYNAMIC_FTRACE, and both
powerpc and s390 removed support for static ftrace in commits:
0c0c52306f ("powerpc: Only support DYNAMIC_FTRACE not static")
5d6a016349 ("s390/ftrace: enforce DYNAMIC_FTRACE if FUNCTION_TRACER is selected")
... and according to Steven, static ftrace is only supported on x86 to
allow testing that the core code still functions in this configuration.
Given that, let's simplify matters by removing arm64's support for
static ftrace. This avoids the problem originally reported, and leaves
us with less code to maintain.
Fixes: 26299b3f6b ("ftrace: arm64: move from REGS to ARGS")
Link: https://lore.kernel.org/r/202211212249.livTPi3Y-lkp@intel.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221122163624.1225912-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Move all the exports into a namespace.
This also adds the MODULE_IMPORT_NS to the 3 drivers that use the
exported functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that
it is more explicit what is being referred to. This is preparation for
using the symbol to namespace the exports.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/media/pci/intel/ipu3/cio2-bridge.c: In function ‘cio2_bridge_unregister_sensors’:
drivers/media/pci/intel/ipu3/cio2-bridge.c:258:17: error: implicit declaration of function ‘i2c_unregister_device’; did you mean ‘spi_unregister_device’? [-Werror=implicit-function-declaration]
258 | i2c_unregister_device(sensor->vcm_i2c_client);
| ^~~~~~~~~~~~~~~~~~~~~
| spi_unregister_device
Link: https://lore.kernel.org/linux-media/S230142AbiJTWql/20221020224641Z+958@vger.kernel.org
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In S1G beacon frames there shouldn't be multi-BSSID elements
since that's not supported, remove that to avoid a potential
integer underflow and/or misparsing the frames due to the
different length of the fixed part of the frame.
While at it, initialize non_tx_data so we don't send garbage
values to the user (even if it doesn't seem to matter now.)
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add myself as maintainer for the drivers/staging/media/atomisp code.
Link: https://lore.kernel.org/linux-media/20221123161447.15834-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit 5441e9dafd ("[media] s5p-mfc: Core support for MFC v7")
which adds mfc v7 support for Exynos3250 and use the same compatible
string as used by Exynos5240 but both the IPs are a bit different in
terms of IP clock.
Add variant driver data based on the new compatible string
"samsung,exynos3250-mfc" for Exynos3250 SoC.
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Fixes: 5441e9dafd ("[media] s5p-mfc: Core support for MFC v7")
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since MFC v7 support was present for both Exynos5420 and Exynos3250
SoC with same compatible string "samsung,mfc-v7". As both SoCs
having different hardware properties and having same compatible
string for both SoCs doesn't seems to be correct.
Add new compatible for Exynos3250 SoC followed by mfc-v7 fallback
which will differentiate the node properties for both SoCs which
support MFC v7.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Suggested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Core thread will continue to work when core_list is not empty, not
depends on lat_list.
Fixes: 365e4ba01d ("media: mtk-vcodec: Add work queue for core hardware decode")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Need to set lat buf to lat_list when lat decode error, or lat buffer will
be lost.
Fixes: 5d418351ca ("media: mediatek: vcodec: support stateless VP9 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Will set lat buffer to lat_list two times when lat decode timeout for
inner racing mode.
If core thread can't get frame buffer, need to return error value.
Fixes: 59fba9eed5 ("media: mediatek: vcodec: support stateless H.264 decoding for mt8192")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Core thread will call v4l2_m2m_buf_done to set dst buffer done for
lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to
free dst buffer when lat decode error, core thread will access kernel
NULL pointer dereference, then crash.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver may can't get v4l2 buffer when lat or core decode timeout,
will lead to crash when call v4l2_m2m_buf_done to set dst buffer
(NULL pointer) done.
Fixes: 7b182b8d9c ("media: mediatek: vcodec: Refactor get and put capture buffer flow")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
driver needs to cancel vpu before releasing the vpu instance,
so call v4l2_m2m_ctx_release() first,
to handle the redundant event triggered after m2m_ctx is released.
lock and check m2m_ctx in the event handler.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
firmware should be waked up by start or configure command,
but there is a very small chance that firmware failed to wakeup.
in such case, try to wakeup firmware again by sending a noop command
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are venc node warnings when running dtbs_check, the clock-names
was unexpected, missing properties '#address-cells' and '#size-cells'.
Add the corresponding platform compatible to schema.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The VIDEO_ASPEED is part of the Aspeed silicon so it makes
sense to depend on ARCH_ASPEED and for compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
remove the double word 'in'.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This allows the device to probe and register its async subdev without
a sensor attached.
The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.
Fixes: 576d196c52 ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This allows the device to probe and register its async subdev without
a sensor attached.
The rationale is that the parent driver might otherwise wait for the
subdev to be registered when it should be available (from the fwnode
graph endpoint perspective). This is generally not problematic when
the MIPI CSI-2 bridge is the only device attached to the parent, but
in the case of a CSI controller that can feed from both MIPI CSI-2
and parallel, it would prevent using the parallel sensor due to the
parent waiting for the MIPI CSI-2 subdev to register.
Fixes: af54b4f4c1 ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.
Fixes: 576d196c52 ("media: sunxi: Add support for the A83T MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Zero-length arrays are deprecated[1] and are being replaced with
flexible array members in support of the ongoing efforts to tighten the
FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing
with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3.
Replace zero-length array with flexible-array member.
This results in no differences in binary output.
[1] https://github.com/KSPP/linux/issues/78
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221118211146.never.395-kees@kernel.org
The bridge needs both its pads connected to be able to stream data.
Enforcing this is useful to produce an error when no sensor is
connected.
Fixes: af54b4f4c1 ("media: sunxi: Add support for the A31 MIPI CSI-2 controller")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In a SoC based solution, it would be useful to know the versions of the
various binary firmware blobs the system is running on. On a QCOM based
SoC, this info can be obtained from socinfo debugfs infrastructure. For
this to work, respective subsystem drivers have to export the firmware
version information to an SMEM based version information table.
Having firmware version information at one place will help quickly
figure out the firmware versions of various subsystems on the device
instead of going through builds/logs in an event of a system crash.
Fill WLAN firmware version information in SMEM version table to be
printed as part of socinfo debugfs infrastructure on a Qualcomm based
SoC.
This change is applicable only for SNOC/QMI based targets.
Example:
cat /sys/kernel/debug/qcom_socinfo/cnss/name
QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221117180534.2267-1-quic_youghand@quicinc.com
