The functions called by the pcs_config() method always return zero, so
there is no point trying to handle an error from these functions. Make
these functions void, eliminate the "err" variable and simply return
zero from the pcs_config() function itself.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a result of help from Frank Wunderlich to investigate and test, we
know a bit more about the PCS on the Mediatek platforms. Update the
definitions from this investigation.
This PCS appears similar, but not identical to the Lynx PCS.
Although not included in this patch, but for future reference, the PHY
ID registers at offset 4 read as 0x4d544950 'MTIP'.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to convert the PHY interface mode to the required link
timer setting as stated by the appropriate standard. Inappropriate
interface modes return an error.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor system has a separate checkbox for increasing brightness of the
backlight combined with a big warning that power consumption will
greatly increase. With that checkbox enabled there is a greater range in
which backlight brightness can be adjusted
Add a switch to achieve the same, since the backlight is actually LED,
this seems to be the most appopiate place to add it. Nothing fits
perfectly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add backlight for Tolino Shine2 HD. It uses the PWM
of the embedded controller.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hemant moved out of Qualcomm and expressed his wish to not continue doing
any reviews for MHI patches. So let's remove him from MAINTAINERS file.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Pavel Begunkov says:
====================
a few corrections for SOCK_SUPPORT_ZC
There are several places/cases that got overlooked in regards to
SOCK_SUPPORT_ZC. We're lacking the flag for IPv6 UDP sockets and
accepted TCP sockets. We also should clear the flag when someone
tries to hijack a socket by replacing the ->sk_prot callbacks.
====================
Link: https://lore.kernel.org/r/cover.1666825799.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this only the client initiated tcp sockets have SOCK_SUPPORT_ZC.
The listening socket on the server also has it, but the accepted
connections didn't, which meant IORING_OP_SEND[MSG]_ZC will always
fails with -EOPNOTSUPP.
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Cc: <stable@vger.kernel.org> # 6.0
CC: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/io-uring/20221024141503.22b4e251@kernel.org/T/#m38aa19b0b825758fb97860a38ad13122051f9dda
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove SOCK_SUPPORT_ZC when we're setting ulp as it might not support
msghdr::ubuf_info, e.g. like TLS replacing ->sk_prot with a new set of
handlers.
Cc: <stable@vger.kernel.org> # 6.0
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sockmap replaces ->sk_prot with its own callbacks, we should remove
SOCK_SUPPORT_ZC as the new proto doesn't support msghdr::ubuf_info.
Cc: <stable@vger.kernel.org> # 6.0
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but
d38afeec26 ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.
Cc: <stable@vger.kernel.org> # 6.0
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark the validation fields as private, users shouldn't set
them directly and they are too complicated to explain in
a more succinct way (there's already a long explanation
in the comment above).
The strict_start_type field is set directly and has a dedicated
comment so move that above the "private" section.
Link: https://lore.kernel.org/r/20221027212107.2639255-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior says:
====================
net: Remove the obsolte u64_stats_fetch_*_irq()
This is the removal of u64_stats_fetch_*_irq() users in networking. The
prerequisites are part of v6.1-rc1.
The spi and bpf bits are not part of the series and have been routed
directly.
====================
Link: https://lore.kernel.org/r/20221026132215.696950-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mii_select node is used to determine the fec1's interface
type. Using "enable-active-high" property to configure the
interface type as "RMII". Deleting the property as "RGMII".
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
Git diff output should like this:
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@@ -1506,7 -1648,7 +1650,7 @@@ ieee802_11_parse_elems_full(struct ieee
const struct element *non_inherit = NULL;
u8 *nontransmitted_profile;
int nontransmitted_profile_len = 0;
- size_t scratch_len = params->len;
- size_t scratch_len = params->scratch_len ?: 2 * params->len;
++ size_t scratch_len = params->scratch_len ?: 3 * params->len;
elems = kzalloc(sizeof(*elems) + scratch_len, GFP_ATOMIC);
if (!elems)
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
Major changes:
mac80211
* preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
* add API to show the link STAs in debugfs
* all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
* support 8852BE
rtl8xxxu
* support RTL8188FU
brmfmac
* support two station interfaces concurrently
bcma
* support SPROM rev 11
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmNb2KwRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZs6hggAqrmgHaiRbPYlLVE0hFVaGeVXslfpK9nj
ZGr3bwG5FpioxjAsI7NfwEwpq+FoxTUigG/SShw1Rr8lw43Nt7E57+5McK3qWdKC
5/WndfChPppjtJUpc6PN+UcmCuhcm4TAyMAojbTe5lJ9cJ4yyOWZChDwah3BVZQk
/tHK4qKq8gpppwgkiJ88VdTVoVv5anIvXHH3lAIteljxk0zkaEM7lIQhIFst/zpX
cu/cWvKz2Rh6vnYjkzl8BcrbW8e0/VwnzWggtWs4/kIuRVnHRrrGwlnsULShOscM
fmK+RI2CbJIMucttUOHOXjCg4wwppSit1rH4xOkcwlvrFa7AvDbdHg==
=Zils
-----END PGP SIGNATURE-----
Kalle Valo says:
====================
pull-request: wireless-next-2022-10-28
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
mac80211
- preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
- add API to show the link STAs in debugfs
- all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
- support 8852BE
rtl8xxxu
- support RTL8188FU
brmfmac
- support two station interfaces concurrently
bcma
- support SPROM rev 11
====================
Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use predefined colors and function rather than making up a random label.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We can use PWM instead of just GPIO allowing us to control brightness.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
fix the naming of node-name vs label-name to the correct one, that is
the label was always correct.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since it seems to be a naming-convention to add -hog for gpio hogs do
this.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For NAND modules Toradex does not provide any device-tree overlays. But
we always had a default display output enabled on NAND modules as well
as touchscreens that are placed on displays which can easily be plugged
into those carrier boards. Do reenable these displays and touchscreen
output on all device-trees that are used on NAND modules.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Toradex does provide device-tree overlays to enable certain evaluation
hardware. Keep the buses disabled by default to be enabled again with
overlays.
For customers including this device-tree this has also the advantage
that the hardware we want by default running does not automatically
enable signals on their end.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After we support HAVE_ARCH_HUGE_VMAP, we can now enable
HAVE_ARCH_HUGE_VMALLOC too. This feature has been used in kvmalloc and
alloc_large_system_hash for now. This feature can be disabled by kernel
parameters "nohugevmalloc".
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20221012120038.1034354-3-liushixin2@huawei.com
[Palmer: minor formatting]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This sets the HAVE_ARCH_HUGE_VMAP option, and defines the required page
table functions. With this feature, ioremap area will be mapped with
huge page granularity according to its actual size. This feature can be
disabled by kernel parameter "nohugeiomap".
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20221012120038.1034354-2-liushixin2@huawei.com
[Palmer: minor formatting]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* A fix for a build warning in the jump_label code.
* One of the git://github -> https://github cleanups, for the SiFive
drivers.
* A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term.
* A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains.
* A fix for a runtime warning in the /proc/cpuinfo code.
-----BEGIN PGP SIGNATURE-----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=In1r
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a build warning in the jump_label code
- One of the git://github -> https://github cleanups, for the SiFive
drivers
- A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term
- A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains
- A fix for a runtime warning in the /proc/cpuinfo code
* tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix /proc/cpuinfo cpumask warning
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
riscv: mm: add missing memcpy in kasan_init
MAINTAINERS: git://github.com -> https://github.com for sifive
riscv: jump_label: mark arguments as const to satisfy asm constraints
- Fix the documentation of the *_match_string() family of functions to
properly cover the return value (Andy Shevchenko).
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel).
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan).
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmNb7XoSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx4AgP/1Q78/7GisCGmymtggxYqYwo7Zr0F6GO
yZ/OA4+TQOHeYLjjDH3njlmQnQLyLm8xEwPw+9ThK3p35eVMy01UoQdC5nf2mz9o
mzvR2Vh/7Ed0W58DP4KEyo5IAKGBYWD3SGSoKY0H8v0VBcQt2QLO0LFeZjulTFnb
TsIXTMG/e5ymwYN1tDil/Fiwpr2HUq1D+/jL7bxjw5Pb/IkYCuQXv/5DPyi3TH6e
d8d0CRoc8HKBOjyvAhuQ6bfVotYE/qSOz3gpVXcBwQGiTkPW6Ytk65sfXLEMO0Bz
LTKyQTkduJHPiEMNw32iAwTCrRIfsu5s+98Z/gYCHDY1oojQBMoFQhELzL2/HnLu
1Ab0v9sm8M6yPqVMC2F+wTQLAjkP4LZuTGt/xBkZ4VYlJnpr03ChyBlwut1AjHAs
Xsspal6FDupGI6VY935QBOMwVF75WEFAoR/CfKFIJhkEGxN7VrxlXlLo6ks+06Bi
85dLk0CiTxBcm3bfRaCgLt5AsQYYaDhRxEB70Hs0R4n9gkCTmuiMyZ+hdJYw5SCc
t0sPFF1Fd2pqaZtTMchV7nH9oaAeM/K+6TztXcR5b4iuhoTPEorVR+3mJwb80HRl
Y+Fhl/T7Q2kS+W5LxINsjkKyHBxkEdd0JadEfRlAESOfpwkIZIac0SHVPfv/KGt4
RrV/T6dbzkfi
=OG6y
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki).
- Allow hybrid sleep to use suspend-to-idle as a system suspend method
if it is the current suspend method of choice (Mario Limonciello).
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla).
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=1teO
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
The chip is capable of reporting Vsys voltage supplied to the system.
Add regulator which represents the Vsys supply. This can be used e.g.
as a supply for system PMIC input.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The chip is capable of reporting Vbus voltage, add .get_voltage
implementation to Vbus regulator to report current Vbus voltage.
This requires for the Vbus regulator to be registered always
instead of the current state where the regulator is registered
only in case USB PHY is not found.
Do not provide Vbus regulator enable/disable ops in case USB PHY
is present, as they would race with USB PHY notifier which is also
used to toggle OTG boost mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull the regulator registration code into separate function, so it can
be extended to register more regulators later. Currently this is only
moving ifdeffery into one place and other preparatory changes. The
dev_err_probe() output string is changed to explicitly list vbus
regulator failure, so that once more regulators are registered, it
would be clear which one failed.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Let user set battery charge current and voltage limit via sysfs. This is
useful in case the user space needs to reduce charge current to keep the
system within thermal limits. The maximum charge current and voltage are
still limited to "ti,charge-current" and "ti,battery-regulation-voltage"
values to avoid damaging the hardware in case too high values are set by
user space.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clean up misuse of POWER_SUPPLY_PROP_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX
and POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE
and document what exactly each value means.
The POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE content is newly read
back from hardware, while POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX
is reported as the maximum value set in DT.
The POWER_SUPPLY_PROP_VOLTAGE is newly used to report immediate value
of battery voltage V_BAT, which is what this property was intended to
report and which has been thus far misused to report the charger chip
output voltage V_SYS.
The V_SYS is no longer reported as there is currently no suitable
property to report V_SYS. V_SYS reporting will be reinstated in
subsequent patch.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Clean up misuse of POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT and
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX and document what
exactly each value means.
The POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT content is newly read
back from hardware, while POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX
is reported as the maximum value set in DT.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Document that POWER_SUPPLY_PROP_CURRENT_NOW really does refer to ADC-sampled
immediate battery charge current I_BAT , since the meaning is not clear with
all the currents which might be measured by charger chips.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The "side effects" memmove() test accidentally found[1] a corner case in
the recent refactoring of the i386 assembly memmove(), but missed another
corner case. Instead of hoping to get lucky next time, implement much
more complete tests of memcpy() and memmove() -- especially the moving
window overlap for memmove() -- which catches all the issues encountered
and should catch anything new.
[1] https://lore.kernel.org/lkml/CAKwvOdkaKTa2aiA90VzFrChNQM6O_ro+b7VWs=op70jx-DKaXA@mail.gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
While there were varying degrees of kern-doc for various str*()-family
functions, many needed updating and clarification, or to just be
entirely written. Update (and relocate) existing kern-doc and add missing
functions, sadly shaking my head at how many times I have written "Do
not use this function". Include the results in the core kernel API doc.
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Andy Shevchenko <andy@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-hardening@vger.kernel.org
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/lkml/9b0cf584-01b3-3013-b800-1ef59fe82476@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
In two recent run-time memcpy() bound checking bug reports (NFS[1] and
JFS[2]), the _detection_ was working correctly (in the sense that the
requested copy size was larger than the destination field size), but
the _warning text_ was showing the destination field size as SIZE_MAX
("unknown size"). This should be impossible, since the detection function
will explicitly give up if the destination field size is unknown. For
example, the JFS warning was:
memcpy: detected field-spanning write (size 132) of single field "ip->i_link" at fs/jfs/namei.c:950 (size 18446744073709551615)
Other cases of this warning (e.g.[3]) have reported correctly,
and the reproducer only happens under GCC (at least 10.2 and 12.1),
so this currently appears to be a GCC bug. Explicitly capturing the
__builtin_object_size() results in const temporary variables fixes the
report. For example, the JFS reproducer now correctly reports the field
size (128):
memcpy: detected field-spanning write (size 132) of single field "ip->i_link" at fs/jfs/namei.c:950 (size 128)
Examination of the .text delta (which is otherwise identical), shows
the literal value used in the report changing:
- mov $0xffffffffffffffff,%rcx
+ mov $0x80,%ecx
[1] https://lore.kernel.org/lkml/Y0zEzZwhOxTDcBTB@codemonkey.org.uk/
[2] https://syzkaller.appspot.com/bug?id=23d613df5259b977dac1696bec77f61a85890e3d
[3] https://lore.kernel.org/all/202210110948.26b43120-yujie.liu@intel.com/
Cc: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: llvm@lists.linux.dev
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
For maps of type BPF_MAP_TYPE_CPUMAP memory is allocated first before
checking the max_entries argument. If then max_entries is greater than
NR_CPUS additional work needs to be done to free allocated memory before
an error is returned.
This changes moves the check on max_entries before the allocation
happens.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Link: https://lore.kernel.org/r/20221028183405.59554-1-dev@der-flo.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device
tree. The schematic doesn't specify any special function for the LEDs,
so they're added here without any default triggers and named d1, d2, d3
and d4 just like in the schematic.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While reworking the archrandom handling, commit d349ab99ee ("random:
handle archrandom with multiple longs") switched to the non-early
archrandom helpers in random_init(), which broke initialization of the
entropy pool from the arm64 random generator.
Indeed at that point the arm64 CPU features, which verify that all CPUs
have compatible capabilities, are not finalized so arch_get_random_seed_longs()
is unsuccessful. Instead random_init() should use the _early functions,
which check only the boot CPU on arm64. On other architectures the
_early functions directly call the normal ones.
Fixes: d349ab99ee ("random: handle archrandom with multiple longs")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Paul and I got trapped a few times by not seeing the effects of applying
a patch to the nolibc source code until a "make clean" was issued in
the nolibc directory. It's particularly annoying when trying to confirm
that a proposed patch really solves a problem (or that reverting it
reintroduces the problem).
The reason for the sysroot not being rebuilt was that it can be quite
slow. But in fact it's only slow after a "make clean" issued at the
kernel's topdir, because it's the main "make headers" that can take a
tens of seconds; as long as "usr/include" still contains headers, the
"headers_install" phase is only a quick "rsync", and rebuilding the
whole nolibc sysroot takes a bit less than one second, which is perfectly
acceptable for a test, even more once the time lost caused by misleading
results is factored in.
This patch marks the sysroot target as phony and starts by clearing
the previous sysroot for the current architecture before reinstalling
it. Thanks to this, applying a patch to nolibc makes the effect
immediately visible to "make nolibc-test":
$ time make -j -C tools/testing/selftests/nolibc nolibc-test
make: Entering directory '/k/tools/testing/selftests/nolibc'
MKDIR sysroot/x86/include
make[1]: Entering directory '/k/tools/include/nolibc'
make[2]: Entering directory '/k'
make[2]: Leaving directory '/k'
make[2]: Entering directory '/k'
INSTALL /k/tools/testing/selftests/nolibc/sysroot/sysroot/include
make[2]: Leaving directory '/k'
make[1]: Leaving directory '/k/tools/include/nolibc'
CC nolibc-test
make: Leaving directory '/k/tools/testing/selftests/nolibc'
real 0m0.869s
user 0m0.716s
sys 0m0.149s
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20221021155645.GK5600@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This adds 7 combinations of input values for memcmp() using signed and
unsigned bytes, which will trigger on the original code before Rasmus'
fix. This is mostly aimed at helping backporters verify their work, and
showing how tests for corner cases can be added to the selftests suite.
Before the fix it reports:
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = 64 [FAIL]
16 memcmp_e0_20 = -64 [FAIL]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
And after:
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = -192 [OK]
16 memcmp_e0_20 = 192 [OK]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The C standard says that memcmp() must treat the buffers as consisting
of "unsigned chars". If char happens to be unsigned, the casts are ok,
but then obviously the c1 variable can never contain a negative
value. And when char is signed, the casts are wrong, and there's still
a problem with using an 8-bit quantity to hold the difference, because
that can range from -255 to +255.
For example, assuming char is signed, comparing two 1-byte buffers,
one containing 0x00 and another 0x80, the current implementation would
return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one
of those should of course return something positive.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: 66b6f755ad ("rcutorture: Import a copy of nolibc")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When built at -Os, gcc-12 recognizes an strlen() pattern in nolibc_strlen()
and replaces it with a jump to strlen(), which is not defined as a symbol
and breaks compilation. Worse, when the function is called strlen(), the
function is simply replaced with a jump to itself, hence becomes an
infinite loop.
One way to avoid this is to always set -ffreestanding, but the calling
code doesn't know this and there's no way (either via attributes or
pragmas) to globally enable it from include files, effectively leaving
a painful situation for the caller.
Alexey suggested to place an empty asm() statement inside the loop to
stop gcc from recognizing a well-known pattern, which happens to work
pretty fine. At least it allows us to make sure our local definition
is not replaced with a self jump.
The function only needs to be renamed back to strlen() so that the symbol
exists, which implies that nolibc_strlen() which is used on variable
strings has to be declared as a macro that points back to it before the
strlen() macro is redifined.
It was verified to produce valid code with gcc 3.4 to 12.1 at different
optimization levels, and both with constant and variable strings.
In case this problem surfaces again in the future, an alternate approach
consisting in adding an optimize("no-tree-loop-distribute-patterns")
function attribute for gcc>=12 worked as well but is less pretty.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081618.754a77db-yujie.liu@intel.com
Fixes: 66b6f755ad ("rcutorture: Import a copy of nolibc")
Fixes: 96980b833a ("tools/nolibc/string: do not use __builtin_strlen() at -O0")
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
