Commit graph

98,829 commits

Author SHA1 Message Date
Dave Airlie
bd3c0094a1 Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
Last few updates for 4.16:
- Misc fixes for amdgpu
- Enable swapout for reserved BOs during allocation for ttm
- Misc cleanups for ttm

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (24 commits)
  drm/amdgpu: Correct the IB size of bo update mapping.
  drm/ttm: enable swapout for reserved BOs during allocation
  drm/ttm: add new function to check if bo is allowable to evict or swapout
  drm/ttm: use an operation ctx for ttm_tt_bind
  drm/ttm: use an operation ctx for ttm_tt_populate in ttm_bo_driver (v2)
  drm/ttm: use an operation ctx for ttm_mem_global_alloc_page
  drm/ttm: use an operation ctx for ttm_mem_global_alloc
  drm/ttm: call ttm_bo_swapout directly when ttm shrink
  drm/vmwgfx: remove the default io_mem_pfn set
  drm/virtio: remove the default io_mem_pfn set
  drm/radeon: remove the default io_mem_pfn set
  drm/qxl: remove the default io_mem_pfn set
  drm/nouveau: remove the default io_mem_pfn set
  drm/mgag200: remove the default io_mem_pfn set
  drm/cirrus: remove the default io_mem_pfn set
  drm/bochs: remove the default io_mem_pfn set
  drm/ast: remove the default io_mem_pfn set
  drm/ttm: add ttm_bo_io_mem_pfn to check io_mem_pfn
  drm/amdgpu: fix VM faults with per VM BOs
  drm/ttm: drop the spin in delayed delete if the trylock doesn't work
  ...
2018-01-09 10:09:13 +10:00
Alexei Starovoitov
b2157399cc bpf: prevent out-of-bounds speculation
Under speculation, CPUs may mis-predict branches in bounds checks. Thus,
memory accesses under a bounds check may be speculated even if the
bounds check fails, providing a primitive for building a side channel.

To avoid leaking kernel data round up array-based maps and mask the index
after bounds check, so speculated load with out of bounds index will load
either valid value from the array or zero from the padded area.

Unconditionally mask index for all array types even when max_entries
are not rounded to power of 2 for root user.
When map is created by unpriv user generate a sequence of bpf insns
that includes AND operation to make sure that JITed code includes
the same 'index & index_mask' operation.

If prog_array map is created by unpriv user replace
  bpf_tail_call(ctx, map, index);
with
  if (index >= max_entries) {
    index &= map->index_mask;
    bpf_tail_call(ctx, map, index);
  }
(along with roundup to power 2) to prevent out-of-bounds speculation.
There is secondary redundant 'if (index >= max_entries)' in the interpreter
and in all JITs, but they can be optimized later if necessary.

Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array)
cannot be used by unpriv, so no changes there.

That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on
all architectures with and without JIT.

v2->v3:
Daniel noticed that attack potentially can be crafted via syscall commands
without loading the program, so add masking to those paths as well.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-09 00:53:49 +01:00
Yafang Shao
0c3b34d804 net: tracepoint: exposing sk_faimily in tracepoint inet_sock_set_state
As of now, there're two sk_family are traced with sock:inet_sock_set_state,
which are AF_INET and AF_INET6.
So the sk_family are exposed as well.
Then we can conveniently use it to do the filter.

Both sk_family and sk_protocol are showed in the printk message, so we need
not expose them as tracepoint arguments.

Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Suggested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:32:45 -05:00
Guillaume Nault
23fe846f9a l2tp: adjust comments about L2TPv3 offsets
The "offset" option has been removed by
commit 900631ee6a ("l2tp: remove configurable payload offset").

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:22:42 -05:00
Marcelo Ricardo Leitner
b6c5734db0 sctp: fix the handling of ICMP Frag Needed for too small MTUs
syzbot reported a hang involving SCTP, on which it kept flooding dmesg
with the message:
[  246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too
low, using default minimum of 512

That happened because whenever SCTP hits an ICMP Frag Needed, it tries
to adjust to the new MTU and triggers an immediate retransmission. But
it didn't consider the fact that MTUs smaller than the SCTP minimum MTU
allowed (512) would not cause the PMTU to change, and issued the
retransmission anyway (thus leading to another ICMP Frag Needed, and so
on).

As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU
are higher than that, sctp_transport_update_pmtu() is changed to
re-fetch the PMTU that got set after our request, and with that, detect
if there was an actual change or not.

The fix, thus, skips the immediate retransmission if the received ICMP
resulted in no change, in the hope that SCTP will select another path.

Note: The value being used for the minimum MTU (512,
SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576,
SCTP_MIN_PMTU), but such change belongs to another patch.

Changes from v1:
- do not disable PMTU discovery, in the light of commit
06ad391919 ("[SCTP] Don't disable PMTU discovery when mtu is small")
and as suggested by Xin Long.
- changed the way to break the rtx loop by detecting if the icmp
  resulted in a change or not
Changes from v2:
none

See-also: https://lkml.org/lkml/2017/12/22/811
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:19:13 -05:00
David Ahern
54dc3e3324 net: ipv6: Allow connect to linklocal address from socket bound to vrf
Allow a process bound to a VRF to connect to a linklocal address.
Currently, this fails because of a mismatch between the scope of the
linklocal address and the sk_bound_dev_if inherited by the VRF binding:
    $ ssh -6 fe80::70b8:cff:fedd:ead8%eth1
    ssh: connect to host fe80::70b8:cff:fedd:ead8%eth1 port 22: Invalid argument

Relax the scope check to allow the socket to be bound to the same L3
device as the scope id.

This makes ipv6 linklocal consistent with other relaxed checks enabled
by commits 1ff23beebd ("net: l3mdev: Allow send on enslaved interface")
and 7bb387c5ab ("net: Allow IP_MULTICAST_IF to set index to L3 slave").

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:11:18 -05:00
Sergei Shtylyov
e3e49ca9b0 sh_eth: remove sh_eth_plat_data::edmac_endian
Since the commit 888cc8c20c ("sh_eth: remove EDMAC_BIG_ENDIAN") (geez,
I didn't realize that was 2 years ago!) the initializers in the SuperH
platform code for the 'sh_eth_plat_data::edmac_endian' stopped to matter,
so we can remove that field for good (not sure if  it  was ever useful --
SH7786 Ether has been reported  to have the same EDMAC descriptor/register
endiannes as configured for the SuperH CPU)...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-08 14:10:33 -05:00
Will Deacon
d68e3ba530 drivers/firmware: Expose psci_get_version through psci_ops structure
Entry into recent versions of ARM Trusted Firmware will invalidate the CPU
branch predictor state in order to protect against aliasing attacks.

This patch exposes the PSCI "VERSION" function via psci_ops, so that it
can be invoked outside of the PSCI driver where necessary.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-08 18:43:38 +00:00
Bartosz Golaszewski
6baf9e67c9 irq/work: Improve the flag definitions
IRQ_WORK_FLAGS is defined simply to 3UL. This is confusing as it
says nothing about its purpose. Define IRQ_WORK_FLAGS as a bitwise
OR of IRQ_WORK_PENDING and IRQ_WORK_BUSY and change its name to
IRQ_WORK_CLAIMED.

While we're at it: use the BIT() macro for all flags.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515125996-21564-1-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 19:43:15 +01:00
Daniel Jurgens
cfe4e37fdc {net, IB}/mlx5: Change set_roce_gid to take a port number
When in dual port mode setting a RoCE GID for any port flows through the
master ports mlx5_core_dev. Provide an interface to set the port when
sending this command.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:42:23 -07:00
Daniel Jurgens
32f69e4be2 {net, IB}/mlx5: Manage port association for multiport RoCE
When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.

If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.

Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.

The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.

In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:42:22 -07:00
Daniel Jurgens
7fd8aefb7c IB/mlx5: Make netdev notifications multiport capable
When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:42:21 -07:00
Daniel Jurgens
8737f818ca net/mlx5: Set software owner ID during init HCA
Generate a unique 128bit identifier for each host and pass that value to
firmware in the INIT_HCA command if it reports the sw_owner_id
capability. Each device bound to the mlx5_core driver will have the same
software owner ID.

In subsequent patches mlx5_core devices will be bound via a new VPort
command so that they can operate together under a single InfiniBand
device. Only devices that have the same software owner ID can be bound,
to prevent traffic intended for one host arriving at another.

The INIT_HCA command length was expanded by 128 bits. The command
length is provided as an input FW commands. Older FW does not have a
problem receiving this command in the new longer form.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:42:20 -07:00
Daniel Jurgens
734dc065fc net/mlx5: Fix race for multiple RoCE enable
There are two potential problems with the existing implementation.

1. Enable and disable can race after the atomic operations.
2. If a command fails the refcount is left in an inconsistent state.

Introduce a lock and perform error checking.

Fixes: a6f7d2aff6 ("net/mlx5: Add support for multiple RoCE enable")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:42:20 -07:00
Darrick J. Wong
5a9d929d6e iomap: report collisions between directio and buffered writes to userspace
If two programs simultaneously try to write to the same part of a file
via direct IO and buffered IO, there's a chance that the post-diowrite
pagecache invalidation will fail on the dirty page.  When this happens,
the dio write succeeded, which means that the page cache is no longer
coherent with the disk!

Programs are not supposed to mix IO types and this is a clear case of
data corruption, so store an EIO which will be reflected to userspace
during the next fsync.  Replace the WARN_ON with a ratelimited pr_crit
so that the developers have /some/ kind of breadcrumb to track down the
offending program(s) and file(s) involved.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2018-01-08 10:41:39 -08:00
Moni Shoua
776a3906b6 IB/mlx5: Add support for DC target QP
A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.

The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.

A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:38:51 -07:00
Moni Shoua
b4aaa1f0b4 IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP
The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.

Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().

Downstream patches from this series will add support for both DCI and
DCT driver QPs.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:38:50 -07:00
Moni Shoua
8011c1e336 IB/core: Introduce driver QP type
Vendors can implement type of QPs that are not described in the
InfiniBand specification. To still be able to use the IB/core layer
services (e.g. user object management) without tainting this layer with
driver proprietary logic, a new QP type is added - IB_QPT_DRIVER. This
will be a general QP type that the core layer doesn't know about its true nature.
When a command like create_qp() is passed to a hardware driver the extra
data that is required is taken from the driver channel.
Downstream patches from this series will use that QP type in the mlx5
driver.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:38:50 -07:00
Moni Shoua
57cda166bb net/mlx5: Add DCT command interface
Add a missing command interface to work with a DCT. It includes: creating,
destroying and get events for.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-08 11:38:49 -07:00
Jozsef Kadlecsik
4750005a85 netfilter: ipset: Fix "don't update counters" mode when counters used at the matching
The matching of the counters was not taken into account, fixed.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:12 +01:00
Pablo Neira Ayuso
a3c90f7a23 netfilter: nf_tables: flow offload expression
Add new instruction for the nf_tables VM that allows us to specify what
flows are offloaded into a given flow table via name. This new
instruction creates the flow entry and adds it to the flow table.

Only established flows, ie. we have seen traffic in both directions, are
added to the flow table. You can still decide to offload entries at a
later stage via packet counting or checking the ct status in case you
want to offload assured conntracks.

This new extension depends on the conntrack subsystem.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:10 +01:00
Pablo Neira Ayuso
7c23b629a8 netfilter: flow table support for the mixed IPv4/IPv6 family
This patch adds the IPv6 flow table type, that implements the datapath
flow table to forward IPv6 traffic.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:09 +01:00
Pablo Neira Ayuso
0995210753 netfilter: flow table support for IPv6
This patch adds the IPv6 flow table type, that implements the datapath
flow table to forward IPv6 traffic.

This patch exports ip6_dst_mtu_forward() that is required to check for
mtu to pass up packets that need PMTUD handling to the classic
forwarding path.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:08 +01:00
Pablo Neira Ayuso
ac2a66665e netfilter: add generic flow table infrastructure
This patch defines the API to interact with flow tables, this allows to
add, delete and lookup for entries in the flow table. This also adds the
generic garbage code that removes entries that have expired, ie. no
traffic has been seen for a while.

Users of the flow table infrastructure can delete entries via
flow_offload_dead(), which sets the dying bit, this signals the garbage
collector to release an entry from user context.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:07 +01:00
Pablo Neira Ayuso
3b49e2e94e netfilter: nf_tables: add flow table netlink frontend
This patch introduces a netlink control plane to create, delete and dump
flow tables. Flow tables are identified by name, this name is used from
rules to refer to an specific flow table. Flow tables use the rhashtable
class and a generic garbage collector to remove expired entries.

This also adds the infrastructure to add different flow table types, so
we can add one for each layer 3 protocol family.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:06 +01:00
Pablo Neira Ayuso
90964016e5 netfilter: nf_conntrack: add IPS_OFFLOAD status bit
This new bit tells us that the conntrack entry is owned by the flow
table offload infrastructure.

 # cat /proc/net/nf_conntrack
 ipv4     2 tcp      6 src=10.141.10.2 dst=147.75.205.195 sport=36392 dport=443 src=147.75.205.195 dst=192.168.2.195 sport=443 dport=36392 [OFFLOAD] mark=0 zone=0 use=2

Note the [OFFLOAD] tag in the listing.

The timer of such conntrack entries look like stopped from userspace.
In practise, to make sure the conntrack entry does not go away, the
conntrack timer is periodically set to an arbitrary large value that
gets refreshed on every iteration from the garbage collector, so it
never expires- and they display no internal state in the case of TCP
flows. This allows us to save a bitcheck from the packet path via
nf_ct_is_expired().

Conntrack entries that have been offloaded to the flow table
infrastructure cannot be deleted/flushed via ctnetlink. The flow table
infrastructure is also responsible for releasing this conntrack entry.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:05 +01:00
Pablo Neira Ayuso
0befd061af netfilter: nf_tables: remove nft_dereference()
This macro is unnecessary, it just hides details for one single caller.
nfnl_dereference() is just enough.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:05 +01:00
Florian Westphal
f6931f5f5b netfilter: meta: secpath support
replacement for iptables "-m policy --dir in --policy {ipsec,none}".

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:03 +01:00
Pablo Neira Ayuso
b3a61254d8 netfilter: remove struct nf_afinfo and its helper functions
This abstraction has no clients anymore, remove it.

This is what remains from previous authors, so correct copyright
statement after recent modifications and code removal.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:02 +01:00
Pablo Neira Ayuso
464356234f netfilter: remove route_key_size field in struct nf_afinfo
This is only needed by nf_queue, place this code where it belongs.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:01 +01:00
Pablo Neira Ayuso
ce388f452f netfilter: move reroute indirection to struct nf_ipv6_ops
We cannot make a direct call to nf_ip6_reroute() because that would result
in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define reroute indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:10:53 +01:00
Pablo Neira Ayuso
3f87c08c61 netfilter: move route indirection to struct nf_ipv6_ops
We cannot make a direct call to nf_ip6_route() because that would result
in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define route indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:26 +01:00
Pablo Neira Ayuso
7db9a51e0f netfilter: remove saveroute indirection in struct nf_afinfo
This is only used by nf_queue.c and this function comes with no symbol
dependencies with IPv6, it just refers to structure layouts. Therefore,
we can replace it by a direct function call from where it belongs.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:25 +01:00
Pablo Neira Ayuso
f7dcbe2f36 netfilter: move checksum_partial indirection to struct nf_ipv6_ops
We cannot make a direct call to nf_ip6_checksum_partial() because that
would result in autoloading the 'ipv6' module because of symbol
dependencies.  Therefore, define checksum_partial indirection in
nf_ipv6_ops where this really belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:24 +01:00
Pablo Neira Ayuso
ef71fe27ec netfilter: move checksum indirection to struct nf_ipv6_ops
We cannot make a direct call to nf_ip6_checksum() because that would
result in autoloading the 'ipv6' module because of symbol dependencies.
Therefore, define checksum indirection in nf_ipv6_ops where this really
belongs to.

For IPv4, we can indeed make a direct function call, which is faster,
given IPv4 is built-in in the networking code by default. Still,
CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline
stub for IPv4 in such case.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:23 +01:00
Florian Westphal
625c556118 netfilter: connlimit: split xt_connlimit into front and backend
This allows to reuse xt_connlimit infrastructure from nf_tables.
The upcoming nf_tables frontend can just pass in an nftables register
as input key, this allows limiting by any nft-supported key, including
concatenations.

For xt_connlimit, pass in the zone and the ip/ipv6 address.

With help from Yi-Hung Wei.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:22 +01:00
Pablo Neira Ayuso
c2f9eafee9 netfilter: nf_tables: remove hooks from family definition
They don't belong to the family definition, move them to the filter
chain type definition instead.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:22 +01:00
Pablo Neira Ayuso
c974a3a364 netfilter: nf_tables: remove multihook chains and families
Since NFPROTO_INET is handled from the core, we don't need to maintain
extra infrastructure in nf_tables to handle the double hook
registration, one for IPv4 and another for IPv6.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:21 +01:00
Pablo Neira Ayuso
12355d3670 netfilter: nf_tables_inet: don't use multihook infrastructure anymore
Use new native NFPROTO_INET support in netfilter core, this gets rid of
ad-hoc code in the nf_tables API codebase.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:20 +01:00
Pablo Neira Ayuso
408070d6ee netfilter: nf_tables: add nft_set_is_anonymous() helper
Add helper function to test for the NFT_SET_ANONYMOUS flag.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:16 +01:00
Pablo Neira Ayuso
7a4473a31a netfilter: nf_tables: explicit nft_set_pktinfo() call from hook path
Instead of calling this function from the family specific variant, this
reduces the code size in the fast path for the netdev, bridge and inet
families. After this change, we must call nft_set_pktinfo() upfront from
the chain hook indirection.

Before:

   text    data     bss     dec     hex filename
   2145     208       0    2353     931 net/netfilter/nf_tables_netdev.o

After:

   text    data     bss     dec     hex filename
   2125     208       0    2333     91d net/netfilter/nf_tables_netdev.o

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:15 +01:00
Florian Westphal
f92b40a8b2 netfilter: core: only allow one nat hook per hook point
The netfilter NAT core cannot deal with more than one NAT hook per hook
location (prerouting, input ...), because the NAT hooks install a NAT null
binding in case the iptables nat table (iptable_nat hooks) or the
corresponding nftables chain (nft nat hooks) doesn't specify a nat
transformation.

Null bindings are needed to detect port collsisions between NAT-ed and
non-NAT-ed connections.

This causes nftables NAT rules to not work when iptable_nat module is
loaded, and vice versa because nat binding has already been attached
when the second nat hook is consulted.

The netfilter core is not really the correct location to handle this
(hooks are just hooks, the core has no notion of what kinds of side
 effects a hook implements), but its the only place where we can check
for conflicts between both iptables hooks and nftables hooks without
adding dependencies.

So add nat annotation to hook_ops to describe those hooks that will
add NAT bindings and then make core reject if such a hook already exists.
The annotation fills a padding hole, in case further restrictions appar
we might change this to a 'u8 type' instead of bool.

iptables error if nft nat hook active:
iptables -t nat -A POSTROUTING -j MASQUERADE
iptables v1.4.21: can't initialize iptables table `nat': File exists
Perhaps iptables or your kernel needs to be upgraded.

nftables error if iptables nat table present:
nft -f /etc/nftables/ipv4-nat
/usr/etc/nftables/ipv4-nat:3:1-2: Error: Could not process rule: File exists
table nat {
^^

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:13 +01:00
Florian Westphal
03d13b6868 netfilter: xtables: add and use xt_request_find_table_lock
currently we always return -ENOENT to userspace if we can't find
a particular table, or if the table initialization fails.

Followup patch will make nat table init fail in case nftables already
registered a nat hook so this change makes xt_find_table_lock return
an ERR_PTR to return the errno value reported from the table init
function.

Add xt_request_find_table_lock as try_then_request_module replacement
and use it where needed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:12 +01:00
Florian Westphal
256d94ba33 netfilter: reduce NF_MAX_HOOKS define
This can be same as NF_INET_NUMHOOKS if we don't support DECNET.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:12 +01:00
Florian Westphal
2a95183a5e netfilter: don't allocate space for arp/bridge hooks unless needed
no need to define hook points if the family isn't supported.
Because we need these hooks for either nftables, arp/ebtables
or the 'call-iptables' hack we have in the bridge layer add two
new dependencies, NETFILTER_FAMILY_{ARP,BRIDGE}, and have the
users select them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:11 +01:00
Florian Westphal
bb4badf3a3 netfilter: don't allocate space for decnet hooks unless needed
no need to define hook points if the family isn't supported.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:10 +01:00
Florian Westphal
ef57170bbf netfilter: reduce hook array sizes to what is needed
Not all families share the same hook count, adjust sizes to what is
needed.

struct net before:
/* size: 6592, cachelines: 103, members: 46 */
after:
/* size: 5952, cachelines: 93, members: 46 */

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:09 +01:00
Florian Westphal
e58f33cc84 netfilter: add defines for arp/decnet max hooks
The kernel already has defines for this, but they are in uapi exposed
headers.

Including these from netns.h causes build errors and also adds unneeded
dependencies on heads that we don't need.

So move these defines to netfilter_defs.h and place the uapi ones
in ifndef __KERNEL__ to keep them for userspace.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:08 +01:00
Florian Westphal
b0f38338ae netfilter: reduce size of hook entry point locations
struct net contains:

struct nf_hook_entries __rcu *hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS];

which store the hook entry point locations for the various protocol
families and the hooks.

Using array results in compact c code when doing accesses, i.e.
  x = rcu_dereference(net->nf.hooks[pf][hook]);

but its also wasting a lot of memory, as most families are
not used.

So split the array into those families that are used, which
are only 5 (instead of 13).  In most cases, the 'pf' argument is
constant, i.e. gcc removes switch statement.

struct net before:
 /* size: 5184, cachelines: 81, members: 46 */
after:
 /* size: 4672, cachelines: 73, members: 46 */

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:08 +01:00
Florian Westphal
8c873e2199 netfilter: core: free hooks with call_rcu
Giuseppe Scrivano says:
  "SELinux, if enabled, registers for each new network namespace 6
    netfilter hooks."

Cost for this is high.  With synchronize_net() removed:
   "The net benefit on an SMP machine with two cores is that creating a
   new network namespace takes -40% of the original time."

This patch replaces synchronize_net+kvfree with call_rcu().
We store rcu_head at the tail of a structure that has no fixed layout,
i.e. we cannot use offsetof() to compute the start of the original
allocation.  Thus store this information right after the rcu head.

We could simplify this by just placing the rcu_head at the start
of struct nf_hook_entries.  However, this structure is used in
packet processing hotpath, so only place what is needed for that
at the beginning of the struct.

Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:01:07 +01:00