Current release - regressions:
- net: do not acquire dev->tx_global_lock in netdev_watchdog_up()
- net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- net: fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth: cn20k: fix subbank free list indexing for search order
- eth: airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag,
avoid an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dIVQ
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
Breno reports following splats on mlx5:
RTNL: assertion failed at net/core/dev.c (2241)
WARNING: net/core/dev.c:2241 at netif_state_change+0xed/0x130, CPU#5: ethtool/1335
RIP: 0010:netif_state_change+0xf9/0x130
Call Trace:
<TASK>
__linkwatch_sync_dev+0xea/0x120
ethtool_op_get_link+0xe/0x20
__ethtool_get_link+0x26/0x40
linkstate_prepare_data+0x51/0x200
ethnl_default_doit+0x213/0x470
genl_family_rcv_msg_doit+0xdd/0x110
Looks like I missed ethtool_op_get_link() trying to sync linkwatch,
which needs rtnl_lock. Not all drivers do this - bnxt doesn't,
it just returns the link state, so add an opt-in bit.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 45079e0013 ("net: ethtool: optionally skip rtnl_lock on Netlink path for GET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260624190439.2521219-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a link loss issue during driver initialization on optical ports
connected to forced-mode (non-autoneg) remote switches.
Previously, during driver probe or initialization, hclge_configure()
blindly hardcoded hdev->hw.mac.req_autoneg to AUTONEG_ENABLE for all
media types. While this is necessary for copper (BASE-T) ports to
establish a link, many high-speed optical (fiber) ports in data
centers are connected to switches running in forced mode (fixed speed,
autoneg disabled). Forcing autoneg on these optical ports during
initialization causes a permanent link failure since the remote end
refuses to respond to autoneg pulses.
Fix this by implementing media-type differentiated initialization in
hclge_init_ae_dev(). Copper ports continue to default to
AUTONEG_ENABLE, while optical ports strictly inherit the preset
autoneg status pre-configured by the firmware (hdev->hw.mac.autoneg),
preserving native compatibility with forced-mode network environments.
Fixes: 05eb60e964 ("net: hns3: using user configure after hardware reset")
Signed-off-by: Shuaisong Yang <yangshuaisong@h-partners.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260624141319.271439-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a critical race condition deadlock where the network interface
remains permanently Link Down after a hardware reset under specific
ethtool sequences.
This issue exclusively manifests in firmware-controlled PHY topologies
where the driver relies on the IMP firmware to arbitrate link parameters.
Standard devices driven by the kernel's native PHY_LIB are unaffected.
The deadlock occurs via the following path:
1. User disables autoneg and forces an unmatched speed, forcing link
down: `ethtool -s ethx autoneg off speed 10 duplex full`
2. User re-enables autoneg: `ethtool -s ethx autoneg on`. The netdev
stack passes cmd->base.speed as SPEED_UNKNOWN (0xffffffff).
3. Driver saves req_autoneg=1, but before the interface can link up,
a hardware reset is triggered.
4. During reset recovery, MAC init reads the un-synchronized runtime
state mac.autoneg (which is still 0/OFF), misinterprets it as
forced mode, and pushes the cached SPEED_UNKNOWN into the hardware
registers, causing the MAC firmware state machine to freeze.
Meanwhile, PHY init reads req_autoneg=1 and enables PHY autoneg.
Since the MAC is frozen with 0xffffffff and PHY is running autoneg,
they mismatch permanently.
Fix this by:
1. Intercepting SPEED_UNKNOWN/DUPLEX_UNKNOWN in
hclge_set_phy_link_ksettings() and hclge_cfg_mac_speed_dup_h() to
prevent it from corrupting the driver's cached valid configuration.
2. Save req_autoneg in hclge_set_autoneg().
3. Aligning the state judgment in hclge_set_autoneg_speed_dup() to use
req_autoneg instead of the un-synchronized runtime mac.autoneg,
ensuring both MAC and PHY consistently enter the autoneg branch to
eliminate configuration discrepancies during reset recovery.
Fixes: 05eb60e964 ("net: hns3: using user configure after hardware reset")
Signed-off-by: Shuaisong Yang <yangshuaisong@h-partners.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260624141319.271439-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the MAC autoneg and speed/duplex/lane configuration logic out
of hclge_mac_init() and encapsulate it into a new dedicated helper
function hclge_set_autoneg_speed_dup().
In the init path (hclge_init_ae_dev), this helper is now called after
hclge_update_port_info() so that firmware-reported autoneg values are
already populated before applying the link configuration.
Introduce a separate req_lane_num field in struct hclge_mac to isolate
the user-requested lane count from mac.lane_num, which firmware may
overwrite via hclge_get_sfp_info() with stale values from a prior link
lifecycle (e.g., lane_num=4 from 100G). During probe, req_lane_num is
initialized to 0, which instructs firmware to auto-select the correct
lane count for the current speed, rather than reusing the firmware-
reported mac.lane_num that may be inconsistent with the target speed.
This prevents probe failures from mismatched (speed, lane_num) pairs.
In the reset path (hclge_reset_ae_dev), it runs immediately after
hclge_mac_init(), using the previously cached req_* values to restore
the link without re-querying firmware.
Signed-off-by: Shuaisong Yang <yangshuaisong@h-partners.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260624141319.271439-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor hns3_set_link_ksettings() and hclge_set_phy_link_ksettings()
to unify the configuration path for copper ports.
Previously, netdevs with a native kernel phy attached bypassed the main
MAC parameter caching logic and returned early via
phy_ethtool_ksettings_set(). This prevented the driver from updating
hdev->hw.mac.req_xxx variables for kernel PHY setups, leaving them
out-of-sync during reset recovery.
Clean this up by routing all copper port configurations through
ops->set_phy_link_ksettings(), and perform driver-level or kernel-level
PHY arbitration inside hclge_set_phy_link_ksettings() via
hnae3_dev_phy_imp_supported(). This ensures that the user's intended link
profiles (req_speed, req_duplex, req_autoneg) are uniformly recorded
across all copper and fiber deployment topologies, laying the groundwork
for stable reset recovery.
For copper ports where neither IMP firmware nor a kernel PHY is available
(e.g. PHY_INEXISTENT), hclge_set_phy_link_ksettings() returns -ENODEV.
In hns3_set_link_ksettings(), this is caught so the configuration falls
through to the existing MAC-level path (check_ksettings_param ->
cfg_mac_speed_dup_h), preserving compatibility with PHY-less copper
deployments.
Signed-off-by: Shuaisong Yang <yangshuaisong@h-partners.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260624141319.271439-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before the commit 7553911210 ("net: mana: Allocate MSI-X vectors
dynamically"), all the MANA IRQs were assigned statically and together
during early driver load.
After this commit, the IRQ allocation for MANA was done in two phases.
HWC IRQ allocated earlier and then, queue IRQs dynamically added at a
later point. By this time, the IRQ weights on vCPUs can become imbalanced
and if IRQ count is greater than the vCPU count the topology aware IRQ
distribution logic in MANA can cause multiple MANA IRQs to land on the
same vCPUs, while other sibling vCPUs have none (case 1).
On SMP enabled, low-vCPU systems, this becomes a bigger problem as the
softIRQ handling overhead of two IRQs on the same vCPUs becomes much more
than their overheads if they were spread across sibling vCPUs.
In such cases when many parallel TCP connections are tested, the
throughput drops significantly.
Fix the affinity assignment logic, in cases where the IRQ count is greater
than the vCPU count and when IRQs are added dynamically, by utilizing all
the vCPUs irrespective of their NUMA/core bindings (case 2).
The results of setting the affinity and hint to NULL were also studied,
and we observed that, with this logic if there are pre-existing IRQs
allocated on the VM (apart from MANA), during MANA IRQs allocation, it
leads to clustering of the MANA queue IRQs again (case 3).
=======================================================
Case 1: without this patch
=======================================================
4 vcpu(2 cores), 5 MANA IRQs (1 HWC + 4 Queue)
TYPE effective vCPU aff
=======================================================
IRQ0: HWC 0
IRQ1: mana_q1 0
IRQ2: mana_q2 2
IRQ3: mana_q3 0
IRQ4: mana_q4 3
%soft on each vCPU(mpstat -P ALL 1) on receiver
vCPU 0 1 2 3
=======================================================
pass 1: 38.85 0.03 24.89 24.65
pass 2: 39.15 0.03 24.57 25.28
pass 3: 40.36 0.03 23.20 23.17
=======================================================
Case 2: with this patch
=======================================================
4 vcpu(2 cores), 5 MANA IRQs (1 HWC + 4 Queue)
TYPE effective vCPU aff
=======================================================
IRQ0: HWC 0
IRQ1: mana_q1 0
IRQ2: mana_q2 1
IRQ3: mana_q3 2
IRQ4: mana_q4 3
%soft on each vCPU(mpstat -P ALL 1) on receiver
vCPU 0 1 2 3
=======================================================
pass 1: 15.42 15.85 14.99 14.51
pass 2: 15.53 15.94 15.81 15.93
pass 3: 16.41 16.35 16.40 16.36
=======================================================
Case 3: with affinity set to NULL
=======================================================
4 vCPU(2 cores), 5 MANA IRQs (1 HWC + 4 Queue)
TYPE effective vCPU aff
=======================================================
IRQ0: HWC 0
IRQ1: mana_q1 2
IRQ2: mana_q2 3
IRQ3: mana_q3 2
IRQ4: mana_q4 3
=======================================================
Throughput Impact(in Gbps, same env)
=======================================================
TCP conn with patch w/o patch aff NULL
20480 15.65 7.73 5.25
10240 15.63 8.93 5.77
8192 15.64 9.69 7.16
6144 15.64 13.16 9.33
4096 15.69 15.75 13.50
2048 15.69 15.83 13.61
1024 15.71 15.28 13.60
Fixes: 7553911210 ("net: mana: Allocate MSI-X vectors dynamically")
Cc: stable@vger.kernel.org
Co-developed-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260624072138.1632849-1-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sparx5_register_notifier_blocks() registers the switchdev blocking
notifier before allocating the ordered workqueue. If the workqueue
allocation fails, the error path unregisters the switchdev and netdevice
notifiers, but leaves the blocking notifier registered.
Add a separate error label for the workqueue allocation failure path and
unregister the switchdev blocking notifier there.
Fixes: d6fce51419 ("net: sparx5: add switching support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260623115714.2192074-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses
a plain kcalloc(). If any of the following devm_kcalloc() allocations for
the BPID mapping arrays fails, the function returns without freeing the
bitmap. Free the BPID bitmap before returning from those error paths.
Fixes: d6212d2e41 ("octeontx2-af: Create BPIDs free pool")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260623114316.2182271-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so
pf->caps.num_vsi is zero. This leads to a divide-by-zero in
enetc4_default_rings_allocation() when distributing rings among PF and
VFs.
Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV
instructions silently return zero rather than raising an exception, so
the issue does not cause a visible crash. However, relying on this
behavior is incorrect and poses a cross-platform compatibility risk.
Add an explicit check for num_vsi == 0 and return early after the PF's
rings have been configured.
Fixes: 2d673b0e2f ("net: enetc: add standalone ENETC support for i.MX94")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260624072726.1238903-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-06-22 (ice, i40e, e1000e)
For ice:
Dawid changes call to release control VSI during reset to prevent
leaking it.
Lukasz fixes flow control error check to check value rather than treat
is as bitmap values.
Paul makes link related errors non-fatal to probe to allow for recovery
in certain NVM update situations.
Marcin moves netif_keep_dst() to only be called once when entering
switchdev mode.
ZhaoJinming adds a cleanup path for ice_dpll_init_info() to prevent
memory leaks on error path.
For i40e:
Mohamed Khalfella corrects argument passed in macro to match the
one provided to the macro.
For e1000e:
Dima resolves power state issues by adjusting value of PLL clock gate
and re-enabling K1; a quirk table is added to keep it off for known bad
systems.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Reconfigure PLL clock gate timeout and re-enable K1 on Meteor Lake
i40e: Fix i40e_debug() to use struct i40e_hw argument
ice: dpll: fix memory leak in ice_dpll_init_info error paths
ice: dpll: set pointers to NULL after kfree in ice_dpll_deinit_info
ice: call netif_keep_dst() once when entering switchdev mode
ice: fix ice_init_link() error return preventing probe
ice: fix AQ error code comparison in ice_set_pauseparam()
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
====================
Link: https://patch.msgid.link/20260622220059.2471844-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current irq definition of the wake irq and the lpi irq
is wrong, replace them with the right number and name.
Fixes: 30f0ba420e ("net: stmmac: Add glue layer for Spacemit K3 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260623074637.503864-3-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current MII interface register definition from the vendor is wrong,
use the right number for the macro. Also, correct the interface mask
in spacemit_set_phy_intf_sel() so it can update the register with the
right number
Fixes: 30f0ba420e ("net: stmmac: Add glue layer for Spacemit K3 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260623074637.503864-2-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac->phy_node is acquired via of_parse_phandle() in spl2sw_probe() and
stored in the mac private data, transferring ownership of the
device_node reference to mac. On driver removal, spl2sw_phy_remove()
disconnects the PHY but never drops that reference, so each
probe-then-remove cycle leaks one of_node refcount per port permanently.
Drop the reference after phy_disconnect(). While at it, remove the
redundant inner "if (ndev)" check; comm->ndev[i] was just verified
non-NULL on the line above.
Compile-tested only; no SP7021 hardware available.
Fixes: fd3040b939 ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/f3bdd4c91f3e2269b4e256075f9dc70808b1b8e9.1782195965.git.shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260623025759.3468566-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Configurations with mlx5 built-in but macsec=m fail to link:
x86_64-linux-ld: drivers/infiniband/hw/mlx5/macsec.o: in function `mlx5r_add_gid_macsec_operations':
macsec.c:(.text+0x77d): undefined reference to `macsec_netdev_is_offloaded'
x86_64-linux-ld: drivers/infiniband/hw/mlx5/macsec.o: in function `mlx5r_del_gid_macsec_operations':
macsec.c:(.text+0xe81): undefined reference to `macsec_netdev_is_offloaded'
Fix the dependency so this configuration cannot happen.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260622124229.2444502-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state.
Fixes: 12bb03b436 ("net: mvneta: Handle per-cpu interrupts")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260622074350.1666290-1-yun.zhou@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CGX per-lmac debugfs seq readers obtained struct rvu via
pci_get_drvdata(pci_get_device(..., PCI_DEVID_OCTEONTX2_RVU_AF, ...)),
which leaks a PCI device reference on every read. Store rvu and the CGX
handle in debugfs inode private data when creating stats, mac_filter,
and fwdata files (one context per CGX), and use debugfs aux numbers for
fwdata so lmac_id matches the other CGX debugfs entries.
Fixes: f967488d09 ("octeontx2-af: Add per CGX port level NIX Rx/Tx counters")
Fixes: dbc52debf9 ("octeontx2-af: Debugfs support for DMAC filters")
Fixes: 49f02e6877 ("Octeontx2-af: Debugfs support for firmware data")
Cc: Linu Cherian <lcherian@marvell.com>
Reported-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260622034229.2254145-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIX maximum number of LFs can be set via devlink command
but that can be done before assigning any LFs to a PF/VF.
The condition used to check whether any LFs are assigned is
incorrect. This patch fixes that condition.
Fixes: dd78428786 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1782082853-6941-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When multiple netdevs share a QDMA TX ring and one device is stopped,
netdev_tx_reset_subqueue() zeroes that device's BQL counters while its
pending skbs remain in the shared HW TX ring. When NAPI later completes
those skbs via netdev_tx_completed_queue(), the already-zeroed
dql->num_queued counter underflows.
Fix the issue:
- Remove netdev_tx_reset_subqueue() from airoha_dev_stop() so pending
skbs are completed naturally by NAPI with proper BQL accounting.
- Rework airoha_qdma_tx_cleanup() to disable TX DMA, flush BQL
counters, DMA-unmap and free all pending skbs while skb->dev
references are still valid. Use a per-queue flushing flag checked
under q->lock in airoha_dev_xmit() to prevent races between teardown
and transmit. Call airoha_qdma_stop_napi() before
airoha_qdma_tx_cleanup() at the call sites.
- Move DMA engine start into probe. Split DMA teardown so TX DMA is
disabled in airoha_qdma_tx_cleanup() and RX DMA in
airoha_qdma_cleanup().
- Remove qdma->users counter since DMA lifetime is now tied to
probe/cleanup rather than per-netdev open/stop.
Fixes: a9c2ca61fe ("net: airoha: Support multiple net_devices for a single FE GDM port")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260620-airoha-bql-fixes-v3-1-76b95374e63e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
subbank_srch_order[i] is the physical subbank at search-order slot i,
so each subbank's arr_idx must be i (its slot), not
subbank_srch_order[sb->idx]. The old logic mis-keyed xa_sb_free
and broke allocation traversal order.
Populate arr_idx and xa_sb_free in a single pass over the search
order after subbank structs are initialized.
Fixes: 7ac9d4c407 ("octeontx2-af: npc: cn20k: add subbank search order control")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260619095100.1864440-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d7709812e1 ("net: mana: hardening: Validate adapter_mtu from
MANA_QUERY_DEV_CONFIG") rejected any adapter_mtu value smaller than
ETH_MIN_MTU + ETH_HLEN, including 0, returning -EPROTO and failing
mana_probe().
Some older PF firmware versions still in the field report
adapter_mtu as 0 in the MANA_QUERY_DEV_CONFIG response. With the
hardening check in place, the MANA VF driver now fails to load on
those hosts, breaking networking entirely for guests.
MANA hardware always supports the standard Ethernet MTU. Treat a
reported adapter_mtu of 0 as "the PF did not advertise a value" and
fall back to ETH_FRAME_LEN, the same value used for the pre-V2
message version path. Only jumbo frames remain unavailable until
the PF reports a valid MTU.
Other small-but-nonzero bogus values are still rejected, preserving
the original protection against the unsigned-subtraction wrap that
would otherwise let ndev->max_mtu underflow to a huge value.
Fixes: d7709812e1 ("net: mana: hardening: Validate adapter_mtu from MANA_QUERY_DEV_CONFIG")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260619055348.467224-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_tc_htb_alloc_leaf_queue() assigns queue IDs based on the channel
index (opt->qid = AIROHA_NUM_TX_RING + channel), but updates
real_num_tx_queues with a simple increment (num_tx_queues + 1). When QoS
channels are allocated sparsely (e.g., channels 0 and 3 without 1 and
2), the returned qid can exceed real_num_tx_queues, causing out-of-bounds
accesses in the networking stack.
For example, allocating channel 0 then channel 3 results in
real_num_tx_queues = 34 but qid = 35, which is out of range [0, 34).
Fix this by computing real_num_tx_queues based on the highest active
channel index rather than using a simple counter, in both the allocation
and deletion paths.
Fixes: ef1ca92713 ("net: airoha: Add sched HTB offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260619-airoha-qos-fixes-v2-2-5c43485038f9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_tc_htb_alloc_leaf_queue() computes the HTB QoS channel index
as opt->classid % AIROHA_NUM_QOS_CHANNELS and stores it in qos_sq_bmap.
However, airoha_tc_remove_htb_queue() clears the HTB configuration
using queue + 1 as the channel index, causing an off-by-one error.
Use queue directly as the QoS channel index to match the allocation
logic.
Fixes: ef1ca92713 ("net: airoha: Add sched HTB offload support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260619-airoha-qos-fixes-v2-1-5c43485038f9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When requesting ownership of the NIC (MAC/PHY control), we set up
the heartbeat to look stale:
/* Initialize heartbeat, set last response to 1 second in the past
* so that we will trigger a timeout if the firmware doesn't respond
*/
fbd->last_heartbeat_response = req_time - HZ;
fbd->last_heartbeat_request = req_time;
The response handler then sets:
fbd->last_heartbeat_response = jiffies;
for which we wait via:
fbnic_fw_init_heartbeat() -> fbnic_fw_heartbeat_current()
The scheme is a bit odd, but it should work in principle.
Fix the ordering of operations. We have to set up the stale heartbeat
before we send the message. Otherwise if the response is very fast
we will override it. This triggers on QEMU if we run on the core
that handles the IRQ, and results in ndo_open failing with ETIMEDOUT.
The change in ordering doesn't impact releasing the ownership.
Both ndo_stop and heartbeat check are under rtnl_lock.
Fixes: 20d2e88cc7 ("eth: fbnic: Add initial messaging to notify FW of our presence")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260622154753.827506-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section.
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260619151816.1144289-1-runyu.xiao@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
emac_xsk_xmit_zc() handles tx xmit for zero copy and gets called
inside napi context. User application wakes up the kernel while
initiating the transmit which triggers napi to start processing
the tx packets. The num_tx check inside emac_tx_complete_packets()
returns early if no packet transfer happen hindering the call
to emac_xsk_xmit_zc(). Remove this check to let application
wakeup initiate zero copy xmit traffic.
Add __netif_tx_lock() to ensure that the TX queue is protected
from concurrent access during the transmission of XDP frames.
This fixes netdev watchdog timeout for long runs.
Fixes: e2dc7bfd67 ("net: ti: icssg-prueth: Move common functions into a separate file")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20260618100348.2209907-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In airoha_qdma_set_chan_tx_sched(), the loop clearing queue mask was
using AIROHA_NUM_TX_RING (32) instead of AIROHA_NUM_QOS_QUEUES (8).
Each channel has 8 queues, and TXQ_DISABLE_CHAN_QUEUE_MASK(channel, i)
computes BIT(i + (channel * 8)). With i ranging 0..31, this causes:
- channel 0: clears bit 0..31 (all 4 channels) instead of 0..7
- channel 1: clears bit 8..31 (channels 1-3) instead of 8..15
- channel 2: clears bit 16..31 (channels 2-3) instead of 16..23
- channel 3: clears bit 24..31 (channel 3 only) - correct by accident
While BIT(32+) on arm64 produces 64-bit values truncated to 0 in u32
mask parameter, the loop still incorrectly clears queues within the
same channel beyond queue 7.
Even though this is functionally harmless (the register resets to 0
and is only ever cleared, never set — so clearing extra bits is a
no-op), the loop bound is semantically wrong and should be fixed for
correctness and clarity.
Fix by using AIROHA_NUM_QOS_QUEUES (8) as the loop upper bound.
Fixes: ef1ca92713 ("net: airoha: Add sched HTB offload support")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/178187479434.2400840.1312143943526335838@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation.
Cc: stable@vger.kernel.org
Fixes: 15192a8cf8 ("bnx2x: Split the FP structure")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260620062402.89549-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kernel selftests wait 1.25x of the promised stats refresh time
(as read from ethtool -c). bnxt reports 1sec by default, but
the stats update process has two steps. First device DMAs the
new values, then the service task performs update in full-width
SW counters. So the worst case delay is actually 2x.
Note that the behavior is different for ring stats and port stats.
Port stats are fetched synchronously by the service worker, so
there's no risk of doubling up the delay there.
The problem of stale stats impacts not only tests but real workloads
which monitor egress bandwidth of a NIC. The inaccuracy causes double
counting in the next cycle and spurious overload alarms.
Try to read from the DMA buffer more aggressively, to mitigate
timing issues between DMA and service task. The SW update should
be cheap.
Fixes: 51f307856b ("bnxt_en: Allow statistics DMA to be configurable using ethtool -C.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260619191538.104165-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icssg_ndo_get_stats64() unconditionally calls emac_get_stat_by_name()
with FW PA stat names regardless of whether the PA stats block is
present on the hardware. emac_get_stat_by_name() already guards the
PA stats lookup with `if (emac->prueth->pa_stats)`; when that pointer
is NULL the lookup falls through to netdev_err() and returns -EINVAL.
Because ndo_get_stats64 is polled regularly by the networking stack
this produces thousands of log entries of the form:
icssg-prueth icssg1-eth end0: Invalid stats FW_RX_ERROR
A secondary consequence is that the int(-EINVAL) return value is
implicitly widened to a near-ULLONG_MAX unsigned value when accumulated
into the __u64 fields of rtnl_link_stats64, silently corrupting the
rx_errors, rx_dropped and tx_dropped counters reported by `ip -s link`.
Every other PA-aware code path in the driver is already guarded with
the same `if (emac->prueth->pa_stats)` check. Apply the same guard
here.
Fixes: 0d15a26b24 ("net: ti: icssg-prueth: Add ICSSG FW Stats")
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Cc: danishanwar@ti.com
Cc: rogerq@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618093037.3448858-1-dev@pschenker.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ofdpa_port_fdb(), the hash_del() only unlinks the node from
hash table, but does not free it.
Fix this by adding kfree(found) after the !found == removing check,
where the pointer value is no longer needed.
Found by Coccinelle kfree script.
Cc: <stable+noautosel@kernel.org> # rocker is a test harness, it's never loaded on production systems
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260616013245.7098-1-zhangcoder@yeah.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3c7bf5af21 ("e1000e: Introduce private flag to disable K1")
disabled K1 by default on Meteor Lake and newer systems due to packet
loss observed on various platforms. However, disabling K1 caused an
increase in power consumption.
To mitigate this, reconfigure the PLL clock gate value so that K1 can
remain enabled without incurring the additional power consumption.
Re-enable K1 by default, but keep the private flag to support disabling
it via ethtool. Additionally, introduce a DMI quirk table, so that K1 may
be disabled by default on known problematic systems. Currently, this
includes the Dell Pro 16 Plus, where the issue has been reported to persist
despite the changes to the PLL lock timeout.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220954
Link: https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20250623/048860.html
Link: https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20260330/054059.html
Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Co-developed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Fixes: 3c7bf5af21 ("e1000e: Introduce private flag to disable K1")
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e_debug() macro takes struct i40e_hw *h as first argument. But the
macro body uses hw instead of h. This has been working so far because hw
happens to be the name of the variable in the context where the macro is
expanded. Fix the macro to use the passed argument.
Fixes: 5dfd37c37a ("i40e: Split i40e_osdep.h")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Several error return paths in ice_dpll_init_info() directly return
without freeing previously allocated resources, causing memory leaks:
- When de->input_prio allocation fails, d->inputs is leaked
- When dp->input_prio allocation fails, d->inputs and de->input_prio
are leaked
- When ice_get_cgu_rclk_pin_info() fails, all previously allocated
inputs/outputs/input_prio are leaked
- When ice_dpll_init_pins_info(RCLK_INPUT) fails, same resources
are leaked
Fix this by jumping to the deinit_info label which properly calls
ice_dpll_deinit_info() to free all allocated resources.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_dpll_deinit_info() calls kfree() on several pf->dplls fields
(inputs, outputs, eec.input_prio, pps.input_prio) but does not set
the pointers to NULL afterward. This leaves dangling pointers in the
pf->dplls structure.
While not currently exploitable through existing code paths, this is
unsafe because:
1. If ice_dpll_init_info() is called again after a deinit (e.g. during
driver recovery), and a subsequent allocation within init fails, the
error path will jump to deinit_info and call ice_dpll_deinit_info()
again. Since some pointers still hold the old freed addresses, this
would result in a double-free.
2. Any future code that checks these pointers before use or after free
would be unprotected against use-after-free.
Follow the common kernel convention of setting pointers to NULL after
kfree() so that:
- kfree(NULL) is a safe no-op, preventing double-free
- NULL checks on these pointers become meaningful
This is a preparatory fix for a subsequent patch that routes additional
error paths in ice_dpll_init_info() to the deinit_info label.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
netif_keep_dst() only needs to be called once for the uplink VSI, not
once for each port representor. Move it from ice_eswitch_setup_repr()
to ice_eswitch_enable_switchdev().
Fixes: defd52455a ("ice: do Tx through PF netdev in slow-path")
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_init_link() can return an error status from ice_update_link_info()
or ice_init_phy_user_cfg(), causing probe to fail.
An incorrect NVM update procedure can result in link/PHY errors, and
the recommended resolution is to update the NVM using the correct
procedure. If the driver fails probe due to link errors, the user
cannot update the NVM to recover. The link/PHY errors logged are
non-fatal: they are already annotated as 'not a fatal error if this
fails'.
Since none of the errors inside ice_init_link() should prevent probe
from completing, convert it to void and remove the error check in the
caller. All failures are already logged; callers have no meaningful
recovery path for link init errors.
Fixes: 5b246e533d ("ice: split probe into smaller functions")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix unreachable code: the conditionals in ice_set_pauseparam() used
the bitwise-AND operator suggesting aq_failures is a bitmap, but it
is actually an enum, making the third condition logically unreachable.
Replace the if-else ladder with a switch statement. Also move the
aq_failures initialization to the variable declaration and remove the
redundant zeroing from ice_set_fc().
Fixes: fcea6f3da5 ("ice: Add stats and ethtool support")
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset
Fixes: da62c5ff9d ("ice: Add support for per VF ctrl VSI enabling")
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The dpaa2-switch driver does not support VLAN uppers while its ports are
bridged. This scenario tried to be prevented by rejecting a bridge join
while VLAN uppers exist but the reverse order was still possible.
This patches adds a check so that the dpaa2-switch also does not accept
VLAN uppers while bridged.
Fixes: f48298d3fb ("staging: dpaa2-switch: move the driver out of staging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260618092813.432535-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In airoha_dev_select_queue(), the expression:
queue = (skb->priority - 1) % AIROHA_NUM_QOS_QUEUES;
implicitly converts to unsigned arithmetic: when skb->priority is 0
(the default for unclassified traffic), (0u - 1u) wraps to UINT_MAX,
and UINT_MAX % 8 = 7, routing default best-effort packets to the
highest-priority QoS queue. This causes QoS inversion where the
majority of traffic on a PON gateway starves actual high-priority
flows (VoIP, gaming, etc.).
The "- 1" offset was a leftover from the ETS offload implementation
that has since been removed. The correct mapping is a direct modulo:
queue = skb->priority % AIROHA_NUM_QOS_QUEUES;
This maps priority 0 → queue 0 (lowest), priority 7 → queue 7
(highest), with higher priorities wrapping around. This is the
standard Linux sk_prio → HW queue mapping used by other drivers.
Fixes: 2b288b8156 ("net: airoha: Introduce ndo_select_queue callback")
Link: https://lore.kernel.org/netdev/178185573207.2378135.3729126358670287878@gmail.com/
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/178194366700.2485734.5368768965976693502@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move devm_request_irq() after devm_platform_ioremap_resource() so that
dev->emacp is mapped before the interrupt handler can fire. An early
interrupt hitting emac_irq() would dereference the NULL dev->emacp and
crash.
Also remove redundant error message. devm_platform_ioremap_resource()
already returns an error message with dev_err_probe().
Fixes: dcc34ef7c8 ("net: ibm: emac: manage emac_irq with devm")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260618023405.415644-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On PF shutdown, the current driver free mcs hardware
resources though mcs resources are not allocated to it.
This patch checks the mcs resources status and if resources
are allocated then only sends mailbox message to free them.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1781636420-19816-3-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When all MCS resources mapped to a PF are being freed then clear
stats of all those resources too.
Fixes: 815debbbf7 ("octeontx2-pf: mcs: Clear stats before freeing resource")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/1781636420-19816-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_alloc_free_slots() always passed NPC_MCAM_KEY_X2 into
__npc_subbank_alloc(), which must match sb->key_type, so defrag never
allocated replacement slots on X4 banks. Pass the subbank key type for
bank 0, and only extend the search into bank 1 for X2 (X4 MCAM indices
are confined to b0b..b0t).
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617102149.1309913-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_ppe_init(), when accounting is enabled, the error paths for
dmam_alloc_coherent(mib) and devm_kzalloc(acct) failures return NULL
directly, bypassing the err_free_l2_flows label that destroys the
rhashtable initialized earlier.
While this leak only occurs during probe (not runtime) and the leaked
memory is minimal (an empty rhash table), fixing it ensures proper
error path cleanup consistency.
Fix by changing the two return NULL statements to goto err_free_l2_flows.
Fixes: 603ea5e7ff ("net: ethernet: mtk_eth_soc: fix memory leak in error path")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178167550101.2217645.14579307712717502425@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
prestera_port_sfp_bind() returns err after walking the ports node. If no
child node matches the port's front-panel id, err is never assigned.
Initialize err to 0 because absence of a matching optional port device
tree node is not an error. In that case no phylink is created and port
creation should continue with port->phy_link left NULL. Errors from
malformed matched nodes and phylink_create() still propagate.
Fixes: 52323ef754 ("net: marvell: prestera: add phylink support")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260617193228.1653582-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __fbnic_set_rx_mode() is called from contexts other than
.ndo_set_rx_mode_async(), the uc and mc addr lists are accessed
without the addr lock that __hw_addr_sync_dev() and
__hw_addr_unsync_dev() require. Wrap these unprotected accesses with
netif_addr_lock_bh(). fbnic_clear_rx_mode() has similar issues.
Fixes: eb690ef8d1 ("eth: fbnic: Add L2 address programming")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617-linux-fbnic-hwaddr-v1-1-3f9f5dee7f99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
