Adjust VDSO/VSYSCALL because read_cpu_id() for 32BIT/64BIT are
different, and LoongArch32 doesn't support GENERIC_GETTIMEOFDAY now
(will be supported in future).
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust user accessors for both 32BIT and 64BIT, including: get_user(),
put_user(), copy_user(), clear_user(), etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust system call for both 32BIT and 64BIT, including: add the uapi
unistd_{32,64}.h and syscall_table_{32,64}.h inclusion, add sys_mmap2()
definition, change the system call entry routines, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust module loader for both 32BIT and 64BIT, including: change the s64
type to long, change the u64 type to unsigned long, change the plt entry
definition and handling, etc.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust time routines for both 32BIT and 64BIT, including: rdtime_h() /
rdtime_l() definitions for 32BIT and rdtime_d() definition for 64BIT,
get_cycles() and get_cycles64() definitions for 32BIT/64BIT, show time
frequency info ("CPU MHz" and "BogoMIPS") in /proc/cpuinfo, etc.
Use do_div() for division which works on both 32BIT and 64BIT platforms.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust process management for both 32BIT and 64BIT, including: CPU
context switching, FPU loading/restoring, process dumping and process
tracing routines.
Q: Why modify switch.S?
A: LoongArch32 has no ldptr.d/stptr.d instructions, and asm offsets of
thead_struct members are too large to be filled in the 12b immediate
field of ld.w/st.w.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust boot & setup for both 32BIT and 64BIT, including: efi header
definition, MAX_IO_PICS definition, kernel entry and environment setup
routines, etc.
Add a fallback path in fdt_cpu_clk_init() to avoid 0MHz in /proc/cpuinfo
if there is no valid clock freq from firmware.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add a paragraph to the GEM Objects Creation section about the
drm_gem_huge_mnt_create() helper and to the GEM objects mapping
section explaining how transparent huge pages are handled by GEM.
v4:
- fix wording after huge_pages handler removal
v6:
- fix wording after map_pages handler removal
v11:
- mention drm_gem_huge_mnt_create() helper
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-11-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Introduce the 'panfrost.transparent_hugepage' boolean module parameter
(false by default). When the parameter is set to true, a new tmpfs
mountpoint is created and mounted using the 'huge=within_size'
option. It's then used at GEM object creation instead of the default
'shm_mnt' mountpoint in order to enable Transparent Hugepage (THP) for
the object (without having to rely on a system wide parameter).
v3:
- use huge tmpfs mountpoint in drm_device
v4:
- fix builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- clean up mountpoint creation error handling
- print negative error value
v5:
- use drm_gem_has_huge_tmp() helper
- get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs
v9:
- replace drm_gem_has_huge_tmp() by drm_gem_get_huge_tmp()
v11:
- enable 'panfrost.transparent_hugepage' by default
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-10-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Introduce the 'panthor.transparent_hugepage' boolean module parameter
(false by default). When the parameter is set to true, a new tmpfs
mountpoint is created and mounted using the 'huge=within_size'
option. It's then used at GEM object creation instead of the default
'shm_mnt' mountpoint in order to enable Transparent Hugepage (THP) for
the object (without having to rely on a system wide parameter).
v3:
- use huge tmpfs mountpoint in drm_device
v4:
- fix builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- clean up mountpoint creation error handling
- print negative error value
v5:
- use drm_gem_has_huge_tmp() helper
- get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs
v9:
- replace drm_gem_has_huge_tmp() by drm_gem_get_huge_tmp()
v11:
- enable 'panthor.transparent_hugepage' by default
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-9-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
drm_gem_object_init_with_mnt() and drm_gem_shmem_create_with_mnt() can
be removed now that the drivers use the new drm_gem_huge_mnt_create()
and drm_gem_get_huge_mnt() helpers.
v5:
- use drm_gem_has_huge_mnt() helper
- compile out shmem_file_setup_with_mnt() call in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() with drm_gem_get_huge_mnt()
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-8-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Make use of the new drm_gem_huge_mnt_create() and
drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that
it's just a few lines long, the single function in v3d_gemfs.c is
moved into v3d_gem.c.
v3:
- use huge tmpfs mountpoint in drm_device
- move v3d_gemfs.c into v3d_gem.c
v4:
- clean up mountpoint creation error handling
v5:
- fix CONFIG_TRANSPARENT_HUGEPAGE check
- use drm_gem_has_huge_mnt() helper
v8:
- don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v10:
- get rid of CONFIG_TRANSPARENT_HUGEPAGE ifdefs
v11:
- remove superfluous comment
- add Maíra and Boris R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-7-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Make use of the new drm_gem_huge_mnt_create() and
drm_gem_get_huge_mnt() helpers to avoid code duplication. Now that
it's just a few lines long, the single function in i915_gemfs.c is
moved into i915_gem_shmem.c.
v3:
- use huge tmpfs mountpoint in drm_device
- move i915_gemfs.c into i915_gem_shmem.c
v4:
- clean up mountpoint creation error handling
v5:
- use drm_gem_has_huge_mnt() helper
v7:
- include <drm/drm_print.h> in i915_gem_shmem.c
v8:
- keep logging notice message with CONFIG_TRANSPARENT_HUGEPAGE=n
- don't access huge_mnt field with CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
- remove useless ternary op test in selftests/huge_pages.c
v12:
- fix layering violation in selftests (Tvrtko)
- fix incorrect filename in commit message
v13:
- add Tvrtko A-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patch.msgid.link/20251205182231.194072-6-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Add the drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers
to avoid code duplication in the i915, V3D, Panfrost and Panthor
drivers. The former creates and mounts a dedicated huge tmpfs
mountpoint, for the lifetime of a DRM device, used at GEM object
initialization. The latter retrieves the dedicated huge tmpfs
mountpoint used by a DRM device.
The next commits will port drivers to these helpers.
v3:
- store huge tmpfs mountpoint in drm_device
v4:
- return 0 in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- return 0 when huge_mnt already exists
- use new vfs_parse_fs_string() helper
v5:
- remove warning on !dev->huge_mnt and reset to NULL on free
- inline drm_gem_huge_mnt_create() to remove func from text and avoid
calls in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- compile out drm_device's huge_mnt field in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
- add drm_gem_has_huge_mnt() helper
v6:
- move huge_mnt doc into ifdef'd section
- either inline or export drm_gem_huge_mnt_create()
v7:
- include <drm/drm_device.h> in drm_gem.h
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v11:
- doc fixes
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-5-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
mmap() calls on the DRM file pointer currently always end up using
mm_get_unmapped_area() to get a free mapping region. On builds with
CONFIG_TRANSPARENT_HUGEPAGE enabled, this isn't ideal for GEM objects
backed by shmem buffers on mountpoints setting the 'huge=' option
because it can't correctly figure out the potentially huge address
alignment required.
This commit introduces the drm_gem_get_unmapped_area() function which
is meant to be used as a get_unmapped_area file operation on the DRM
file pointer to lookup GEM objects based on their fake offsets and get
a properly aligned region by calling shmem_get_unmapped_area() with
the right file pointer. If a GEM object isn't available at the given
offset or if the caller isn't granted access to it, the function falls
back to mm_get_unmapped_area().
This also makes drm_gem_get_unmapped_area() part of the default GEM
file operations so that all the DRM drivers can benefit from more
efficient mappings thanks to the huge page fault handler introduced in
previous commit 'drm/shmem-helper: Add huge page fault handler'.
The shmem_get_unmapped_area() function needs to be exported so that
it can be used from the DRM subsystem.
v3:
- include <linux/sched/mm.h> in drm_gem.c
- forward to shmem layer in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
v6:
- use GPL variant to export drm_gem_get_unmapped_area()
- don't export shmem_get_unmapped_area() anymore (use f_op instead)
v11:
- rename drm_gem_object_lookup_from_offset() to
drm_gem_object_lookup_at_offset()
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-4-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Attempt a PMD sized PFN insertion into the VMA if the faulty address
of the fault handler is part of a huge page.
On builds with CONFIG_TRANSPARENT_HUGEPAGE enabled, if the mmap() user
address is PMD size aligned, if the GEM object is backed by shmem
buffers on mountpoints setting the 'huge=' option and if the shmem
backing store manages to allocate a huge folio, CPU mapping would then
benefit from significantly increased memcpy() performance. When these
conditions are met on a system with 2 MiB huge pages, an aligned copy
of 2 MiB would raise a single page fault instead of 4096.
v4:
- implement map_pages instead of huge_fault
v6:
- get rid of map_pages handler for now (keep it for another series
along with arm64 contpte support)
v11:
- remove page fault validity check helper
- rename drm_gem_shmem_map_pmd() to drm_gem_shmem_try_map_pmd()
- add Boris R-b
v12:
- move up ret var decl in fault handler to minimize diff
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-3-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
For a fault at address addr, the page offset is
page_offset = (vmf->address - vma->vm_start) >> PAGE_SHIFT
= ((addr & PAGE_MASK) - vma->vm_start) >> PAGE_SHIFT
= (addr - vma->vm_start) >> PAGE_SHIFT
Since the faulty logical page offset based on VMA is
vmf->pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT)
We can slightly simplify the calculation using
page_offset = vmf->pgoff - vma->vm_pgoff
v11:
- remove misleading comment
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-2-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
After commit a50f7456f8 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in
global scope"), the DMA_BIT_MASK() macro is broken when passed non trivial
statements for the value of 'n'. This is caused by the new version missing
parenthesis around 'n' when evaluating 'n'.
One example of this breakage is the IPU6 driver now crashing due to
it getting DMA-addresses with address bit 32 set even though it has
tried to set a 32 bit DMA mask.
The IPU6 CSI2 engine has a DMA mask of either 31 or 32 bits depending
on if it is in secure mode or not and it sets this masks like this:
mmu_info->aperture_end =
(dma_addr_t)DMA_BIT_MASK(isp->secure_mode ?
IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE);
So the 'n' argument here is "isp->secure_mode ? IPU6_MMU_ADDR_BITS :
IPU6_MMU_ADDR_BITS_NON_SECURE" which gets expanded into:
isp->secure_mode ? IPU6_MMU_ADDR_BITS : IPU6_MMU_ADDR_BITS_NON_SECURE - 1
With the -1 only being applied in the non secure case, causing
the secure mode mask to be one 1 bit too large.
Fixes: a50f7456f8 ("dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope")
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251207184756.97904-1-johannes.goede@oss.qualcomm.com
atomic_pool_expand iteratively tries the allocation while decrementing
the page order. There is no need to issue a warning if an attempted
allocation fails.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d7e673ec2c ("dma-pool: Only allocate from CMA when in same memory zone")
[mszyprow: fixed typo]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251202152810.142370-1-dave.kleikamp@oracle.com
GCC notices that the 16-byte uabi_name field could theoretically be too
small for the formatted string if the instance number exceeds 100.
So grow the field to 20 bytes.
drivers/gpu/drm/i915/intel_memory_region.c: In function ‘intel_memory_region_create’:
drivers/gpu/drm/i915/intel_memory_region.c:273:61: error: ‘%u’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 3 and 11 [-Werror=format-truncation=]
273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u",
| ^~
drivers/gpu/drm/i915/intel_memory_region.c:273:58: note: directive argument in the range [0, 65535]
273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u",
| ^~~~~~
drivers/gpu/drm/i915/intel_memory_region.c:273:9: note: ‘snprintf’ output between 7 and 19 bytes into a destination of size 16
273 | snprintf(mem->uabi_name, sizeof(mem->uabi_name), "%s%u",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
274 | intel_memory_type_str(type), instance);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251205113500.684286-2-ardb@kernel.org
We can get start_register, data_size, and buffer data from the new
sdw_bpt_section parameter. Also, handle all register sections in the
cdns BRA helpers. No function changes as section number is 1.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251021094355.132943-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently we send a BRA message with a start address with continuous
registers in a BPT stream. However, a codec may need to write different
register sections shortly. Introduce a register section in struct
sdw_btp_msg which contain register start address, length, and buffer.
This commit uses only 1 section for each BPT message. And we need to add
up all BPT section length and check if it reach maximum BPT bytes.
No function changes.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251021094355.132943-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Intel DMA buffer size need to be a multiple of data block size.
Find the minimal fake data size and extra buffer size to meet the
requirement.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251030070253.1216871-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We may need to add few fake frames to fit the aligned read dma buffer
size. Add a fake_size parameter to allow the caller to set the fake data
size.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dma buffer need to be a multiple of data block size and
the fifo size. Export a function to return the LCM of data
block size and the fifo size.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, we calculate the required bandwidth after the PDI buffer size
is calculated. However as we need to add some fake frame to align the
data block size, the final PDI size and the frame number will change.
Besides, we need the required bandwidth to decide the DMA channel number
and the channel number will be used to calculate the data block size.
Therefore, we calculate the required bandwidth and export a helper for
the caller to get the required bandwidth.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
data_per_frame will be used for preparing the TX buffer and we may add
some fake frames to ensure the data in the buffer will be flushed.
So that it should indicate the frame capability even if the required
data bytes are less than the frame capability.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DP0 is only for BPT stream. We should not compute and update the port
params of the normal audio streams.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code uses i as the frame index which is 0 based. And
"bad frame %d/%d", i, num_frames where num_frames is 1 based. Change the
frame index to i + 1 to align with num_frames and more readable.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for controller version v3.1.0, which has changes in
register layout and some register fields compared to v2.0.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Number of input and output ports can be dynamically read from the
controller registers, getting this value from Device Tree is redundant
and potentially lead to bugs.
Remove the code parsing this property along with marking this as
deprecated in device tree bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Number of input and output ports can be dynamically read from the
controller registers, getting this value from Device Tree is redundant
and potentially lead to bugs.
Mark these two properties as deprecated in device tree bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
remove read fifo depth field parsing logic, as rd_fifo_depth is never
used in the driver. Cleaning this up would benefit when adding new
variant support which includes adding variant fields for rd_fifo_depth.
ex: Glymur has this rd_fifo_depth register fields changed from v2.x
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for of_property_read_u8_index(), simillar to others
u16 and u32 variants. Having this helper makes the code more tidy in
isome cases, specially when we are parsing multiple of these into
data structures.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # sm8550
Link: https://patch.msgid.link/20250912083225.228778-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As everything else related to PSR and Panel Replay capabilities are moved
into intel_connector move sink_sync_latency as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-9-jouni.hogander@intel.com
As a preparation for MST Panel Replay we need to move Panel Replay sink
related data into intel_connector. Move sink support booleans as well
into intel_connector. Generally this is more correct place for this data so
move PSR versions as well.
Still sink_support and sink_panel_replay_support are kept to keep CAN_PSR
and CAN_PANEL_REPLAY macros. Plan is to keep them that way as they are
widely used from patch where connector is not available.
Later we might want to clear intel_dp->psr.sink_panel_replay_support if any
of the devices in branch is not supporting Panel Replay (mst).
v2:
- commit message updated
- Extra w/s removed
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-8-jouni.hogander@intel.com
As a preparation for MST Panel Replay we need to move Panel Replay sink
related data into intel_connector. Move Panel Replay DSC sink support data
as well into intel_connector.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-7-jouni.hogander@intel.com
Currently we are leaving pr_dpcd containing Panel Replay capability DPCD
registers as it is on disconnect. Clear it as well on disconnect.
v2: add FIXME
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-6-jouni.hogander@intel.com
As a preparation for MST Panel Replay we need to move Panel Replay sink
related data into intel_connector. Move pr_dpcd as well into
intel_connector. Generally this is more correct place for this data so move
psr_dpcd as well.
v2:
- move pr/psr_dpcd into *_caps substruct
- drop intel_dp from psr2_su_region_et_valid and
_panel_replay_compute_su_granularity parameters
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-5-jouni.hogander@intel.com
Currently we are checking Panel Replay capability DPCD register in
intel_alpm.c and writing PR_ALPM_CTL_ALLOW_LINK_OFF_BETWEEN_AS_SDP_AND_SU
and PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE in PR_ALPM_CTL
register base on the informaion. Instead of directly accessing
intel_dp->pr_dpcd compute the behavior during psr_compute_config and store
it in intel_crtc_state.
v2:
- inline added helpers
- use intel_dp_attached_dp instead of passing as a parameter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-4-jouni.hogander@intel.com
Currently we are storing only one set of granularity information for panels
supporting both PSR and Panel Replay. As panel is informing own
granularities for PSR and Panel Replay they could be different. Let's use
own granularities for PSR and Panel Replay instead of having only one set
for both. This is done by having intel_connector::psr_caps and
panel_replay_caps both containing granularity information.
Also remove complexity of sharing granularity read between PSR and Panel
Replay.
v3:
- use cpu_to_le16 for default value
v2:
- use __le16 for two byte values in dpcd
- use sizeof instead of hardcoded size in reading dpcd
- drop unnecessarily passing intel_dp pointer
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-3-jouni.hogander@intel.com
As a preparation for MST Panel Replay implementation add psr_caps and
panel_replay_caps structures into intel_connector. These are supposed to
contain all sink information related to PSR and Panel Replay.
As a first step in moving Panel Replay and PSR sink data add panel
granularity information into these newly added caps structures.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-2-jouni.hogander@intel.com
Switch to use the new .i3c_xfers() callback, which supports all I3C
transfer modes (SDR and HDR). Also replace struct i3c_priv_xfer with the
new struct i3c_xfer, as i3c_priv_xfer is now an alias of i3c_xfer.
No functional changes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20251203-i3c_xfer_cleanup_master-v2-1-7dd94d04ee2d@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support
-----BEGIN PGP SIGNATURE-----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=qQUB
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...