Commit graph

1,462,193 commits

Author SHA1 Message Date
Len Brown
1a23ba6a1b tools/power turbostat: Print wide names only for RAW 64-bit columns
Print a wide column header only for the case of a 64-bit RAW counter.

It turns out that wide column headers otherwise are more harm than good.

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:14 -05:00
Len Brown
2ba8b24e9d tools/power turbostat: Print percentages in 8-columns
Added counters that are FORMAT_PERCENT
do not need to be 64-bits -- 32 is plenty.
This allows the output code to fit them,
and their header, into 8-columns.

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:14 -05:00
Len Brown
8808292799 tools/power turbostat: Print "nan" for out of range percentages
Sometimes counters return junk.
For the cases where values > 100% is invalid, print "nan".

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:14 -05:00
Len Brown
951845d51d tools/power turbostat: Validate APERF access for VMWARE
VMWARE correctly enumerates lack of APERF and MPERF in CPUID,
but turbostat didn't consult that before attempting to access them.

Since VMWARE allows access, but always returns 0, turbostat
got confusd into an infinite reset loop.

Head this off by listening to CPUID.6.APERF_MPERF
(and rename the existing variable to make this more clear)

Reported-by: David Arcari <darcari@redhat.com>
Tested-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:14 -05:00
Len Brown
68769a0b5a tools/power turbostat: Enhance perf probe
check_perf_access() will now check both IPC and LLC perf counters
if they are enabled.  If any fail, it now disables perf
and all perf counters.

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:14 -05:00
Len Brown
19476a592b tools/power turbostat: Validate RAPL MSRs for AWS Nitro Hypervisor
Even though the platform->plat_rapl_msrs enumeration may be accurate,
a VM, such as AWS Nitro Hypervisor, may deny access to the underlying MSRs.

Probe if PKG_ENERGY is readable and non-zero.
If no, ignore all RAPL MSRs.

Reported-by: Emily Ehlert <ehemily@amazon.de>
Tested-by: Emily Ehlert <ehemily@amazon.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:14 -05:00
Malaya Kumar Rout
51860d6330 tools/power x86_energy_perf_policy: Fix potential NULL pointer dereference
In err_on_hypervisor(), strstr() is called to search for "flags" in the
buffer, but the return value is not checked before being used in pointer
arithmetic (flags - buffer). If strstr() returns NULL because "flags" is
not found in /proc/cpuinfo, this will cause undefined behavior and likely
a crash.

Add a NULL check after the strstr() call and handle the error appropriately
by cleaning up resources and reporting a meaningful error message.

Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 16:11:09 -05:00
Linus Torvalds
cb502f0e5e - Largely cleanups along with a change to save XSS to the GHCB (Guest-Host
Communication Block) in SEV-ES guests so that the hypervisor can determine
    the guest's XSAVES buffer size properly and thus support shadow stacks in
    AMD confidential guests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmkttt0ACgkQEsHwGGHe
 VUoaFg/8CY+UAE1VtnaWhG7hpxCqBLlVtyt3gVhIn6ZCZ5mxtFoEcZI8BnxnFbbM
 Rpd+5LsMbu4GWfq/AEx/a+IT3rKZIT1RjRrd73JZZYRNpv6/Vnmv/7OizjDbBqhU
 n3Q1rHJCaVk90oP2sbB4dr9qsYHOx624jz0CrBxUM7GnaCQwtofqa6hK6HMJDu3g
 OLjJCoaHY0ry779QUjCmMJ1BbOLsy1fGsmuQO8LcE6xWRJv5ueJPcZbH0I0g5UIF
 NExe03uxaSvrM0ZYdjHpQU590kyPwjzo0Jx8IANQDb0dyY4mIFPdnZwbRBr/OPnZ
 205c0EllHZvDZ4nKTYfeJYjXnPWmovHXJATr/BuqW+0GQZYmTbDq2IgvbbnE9gs1
 67Sy94ISuxs683hNb9U2cLI7OFHcVDGfESuHhmeJTQsVY+VazL00p6azFP1ONpsn
 N93GYK+ZFvOeFFssO/gm97jbkKyUH9PS2+TEbhijeQkZ/PYKVbObM89LDLSRrKC7
 5mEFCZIKIehKLdSoAc8yTzKRE0piyK/PR6ykzP9A2rEjrSN2HDqvsR+nDr0hQ1/V
 Uye4a8V0XiHyZsvD+AIYJnARGYdcnUCiezep81WaC55hn0sdqrhlqnycnkd+7fDE
 MZF9epXCnIAA8IF7I5jCLfwTa1b6ouMhBxpwiMpaL9DGmQghWcM=
 =GCGn
 -----END PGP SIGNATURE-----

Merge tag 'x86_sev_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SEV updates from Borislav Petkov:

 - Largely cleanups along with a change to save XSS to the GHCB
   (Guest-Host Communication Block) in SEV-ES guests so that the
   hypervisor can determine the guest's XSAVES buffer size properly
   and thus support shadow stacks in AMD confidential guests

* tag 'x86_sev_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cc: Fix enum spelling to fix kernel-doc warnings
  x86/boot: Drop unused sev_enable() fallback
  x86/coco/sev: Convert has_cpuflag() to use cpu_feature_enabled()
  x86/sev: Include XSS value in GHCB CPUID request
  x86/boot: Move boot_*msr helpers to asm/shared/msr.h
2025-12-02 13:07:53 -08:00
Linus Walleij
ac52b4a985 MAINTAINERS: Change Linus Walleij mail address
I will be using my kernel.org mail address going forward.

There is no point in splitting this MAINTAINERS patch up
per subsystem, I will just include it with the rest of my
patches to pin control in the next merge window.

Signed-off-by: Linus Walleij <linusw@kernel.org>
2025-12-02 22:04:58 +01:00
Malaya Kumar Rout
7446bd6119 tools/power x86_energy_perf_policy: Fix format string in error message
The error message in validate_cpu_selected_set() uses an incomplete
format specifier "cpu%" instead of "cpu%d", resulting in the error
message printing "Requested cpu% is not present" rather than
showing the actual CPU number.

Fix the format string to properly display the CPU number.

Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 15:58:30 -05:00
Len Brown
90a2fe2576 tools/power x86_energy_perf_policy: Simplify Android MSR probe
no functional change

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 15:58:30 -05:00
Kaushlendra Kumar
2ff4b59f2e tools/power x86_energy_perf_policy: Add Android MSR device support
Add support for Android MSR device paths which use /dev/msrN format
instead of the standard Linux /dev/cpu/N/msr format. The tool now
probes both path formats at startup and uses the appropriate one.

This enables x86_energy_perf_policy to work on Android systems where
MSR devices follow a different naming convention while maintaining
full compatibility with standard Linux systems.

Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 15:58:30 -05:00
Len Brown
d71cb404f0 tools/power turbostat: Add run-time MSR driver probe
Rather than starting down the conditional-compile road...

Probe the location of the MSR files at run-time.

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 15:58:30 -05:00
Emily Ehlert
2313b97bc0 tools/power turbostat: Set per_cpu_msr_sum to NULL after free
Set per_cpu_msr_sum to NULL after freeing it in the error path
of msr_sum_record() to prevent potential use-after-free issues.

Signed-off-by: Emily Ehlert <ehemily@amazon.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 15:58:30 -05:00
Len Brown
28a3ad1fd2 tools/power turbostat: Add LLC stats
LLCkRPS = Last Level Cache Thousands of References Per Second
LLC%hit = Last Level Cache Hit %

These columns are enabled by-default.
They can be controlled with the --show/--hide options
by individual column names above,
or together using the "llc" or "cache" groups.

Signed-off-by: Len Brown <len.brown@intel.com>
2025-12-02 15:58:23 -05:00
Alexey Kardashevskiy
4be423572d crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)
Implement the SEV-TIO (Trusted I/O) firmware interface for PCIe TDISP
(Trust Domain In-Socket Protocol). This enables secure communication
between trusted domains and PCIe devices through the PSP (Platform
Security Processor).

The implementation includes:
- Device Security Manager (DSM) operations for establishing secure links
- SPDM (Security Protocol and Data Model) over DOE (Data Object Exchange)
- IDE (Integrity Data Encryption) stream management for secure PCIe

This module bridges the SEV firmware stack with the generic PCIe TSM
framework.

This is phase1 as described in Documentation/driver-api/pci/tsm.rst.

On AMD SEV, the AMD PSP firmware acts as TSM (manages the security/trust).
The CCP driver provides the interface to it and registers in the TSM
subsystem.

Detect the PSP support (reported via FEATURE_INFO + SNP_PLATFORM_STATUS)
and enable SEV-TIO in the SNP_INIT_EX call if the hardware supports TIO.

Implement SEV TIO PSP command wrappers in sev-dev-tio.c and store
the data in the SEV-TIO-specific structs.

Implement TSM hooks and IDE setup in sev-dev-tsm.c.

Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/692f506bb80c9_261c11004@dwillia2-mobl4.notmuch
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2025-12-02 12:50:33 -08:00
Steven Rostedt
b1e7a590a0 ring-buffer: Add helper functions for allocations
The allocation of the per CPU buffer descriptor, the buffer page
descriptors and the buffer page data itself can be pretty ugly:

  kzalloc_node(ALIGN(sizeof(struct buffer_page), cache_line_size()),
               GFP_KERNEL, cpu_to_node(cpu));

And the data pages:

  page = alloc_pages_node(cpu_to_node(cpu),
                          GFP_KERNEL | __GFP_RETRY_MAYFAIL | __GFP_COMP | __GFP_ZERO, order);
  if (!page)
	return NULL;
  bpage->page = page_address(page);
  rb_init_page(bpage->page);

Add helper functions to make the code easier to read.

This does make all allocations of the data page (bpage->page) allocated
with the __GFP_RETRY_MAYFAIL flag (and not just the bulk allocator). Which
is actually better, as allocating the data page for the ring buffer tracing
should try hard but not trigger the OOM killer.

Link: https://lore.kernel.org/all/CAHk-=wjMMSAaqTjBSfYenfuzE1bMjLj+2DLtLWJuGt07UGCH_Q@mail.gmail.com/

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251125121153.35c07461@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-12-02 15:49:35 -05:00
Bartosz Golaszewski
7eba05e79c MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
Manivannan is doing a lot of work on the PCI power control. Add him as
maintainer.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251120082747.10541-1-brgl@bgdev.pl
2025-12-02 14:33:27 -06:00
Hans Zhang
51f38bef04 MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
Add Hans Zhang as maintainer of the CIX Sky1 PCIe host driver.

Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-9-hans.zhang@cixtech.com
2025-12-02 14:18:03 -06:00
Hans Zhang
a0d9f2c08f PCI: sky1: Add PCIe host support for CIX Sky1
Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based on the
Cadence High Performance Architecture (HPA) PCIe core.

The controller supports MSI/MSI-X via GICv3, Single Virtual Channel, and
Single Function.

Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
[mani: moved the PCI ID definitions and squashed Kconfig change]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: sort Kconfig menu entry, squash
https://lore.kernel.org/r/aSBqp0cglr-Sc8na@stanley.mountain]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-8-hans.zhang@cixtech.com
2025-12-02 14:17:55 -06:00
Hans Zhang
33c139dcff dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
Document the bindings for CIX Sky1 PCIe Controller configured in Root
Complex mode with five Root Ports.

The controller supports 4 INTx, MSI and MSI-X interrupts with the help of
the ARM GICv3 interrupt controller.

Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251108140305.1120117-6-hans.zhang@cixtech.com
2025-12-02 14:17:52 -06:00
Linus Torvalds
d748981834 - The mandatory pile of cleanups the cat drags in every merge window
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmktqqMACgkQEsHwGGHe
 VUpBDg/8CT4uBJLqgQYoh9YYN9U/C1walUMLivHq9VJbld7a55nGCirUTBuiTRzp
 V2np/6V/XpG2YmV9Xj6E4Q6QLiOsfrWKFRzfr7OlPZ7yW5GR8aKBcEZm2Voi7j94
 qLVSraAjtfmTtU5Ym7Lp1fqswDW2Y+iU6zqIyotqy+/7qZ6yp4NwlrUwSocDsSLo
 n6Gh1Vv6fXdeMckzT1WJ/CMtx07IfQB/wqVVTO4WwBu1Pv71WO+Cv1pG2mewUVjK
 879X7+oc1icxCtD2OZxHfOEJGtC97N7cZDq6VEd4s/bjgYF75glyFtkv/DVgbQ6E
 BSkwciT5Sqb7B5N09RJWWJiNLlNQPFQdDFAuU/Sk18Vqc01jySFoWLLsiS/DeCsz
 opEnPK6uXO4m+2DI44dWpWgVj33a/ao6zej3uEPENkp9+FYaZPwip8Bdjn1FptBp
 ZGmqa7oy38MXTzV6hOctMAx/nXE05lff41Xe8fLlisNc7a6ZUwql9oA4A4yULtKI
 BMlddTZ5/N5LzOGVH5nixX+ig3wDqtEEOD1tdLb/f8Nhy71Z3Kmbf7zDuJCTaabn
 VAGaPUDZ4qfeMks1qRIVVR7rUo6PwRRNvi8Wyiauc7/fnxWyVR0z1vrqs2o3MtZJ
 WQ0/HAZZ/K54HWk049ea2b1kFjjOe6R5hKKX1Hc2nPIS3APD/Vc=
 =3uJO
 -----END PGP SIGNATURE-----

Merge tag 'x86_cleanups_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cleanups from Borislav Petkov:

 - The mandatory pile of cleanups the cat drags in every merge window

* tag 'x86_cleanups_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Clean up whitespace in a20.c
  x86/mm: Delete disabled debug code
  x86/{boot,mtrr}: Remove unused function declarations
  x86/percpu: Use BIT_WORD() and BIT_MASK() macros
  x86/cpufeatures: Correct LKGS feature flag description
  x86/idtentry: Add missing '*' to kernel-doc lines
2025-12-02 12:17:47 -08:00
Manikandan K Pillai
8babd8afe5 PCI: cadence: Add support for High Perf Architecture (HPA) controller
Add support for Cadence PCIe RP configuration for High Performance
Architecture (HPA) controllers. The Cadence High Performance controllers
are the latest PCIe controllers that have support for DMA, optional IDE
and updated register set. Add a common library for High Performance
Architecture (HPA) PCIe controllers.

Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: squash https://lore.kernel.org/r/20251120093518.2760492-1-jiapeng.chong@linux.alibaba.com,
squash https://lore.kernel.org/all/52abaad8-a43e-4e29-93d7-86a3245692c3@cixtech.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-5-hans.zhang@cixtech.com
2025-12-02 14:17:03 -06:00
Alexey Kardashevskiy
eeb934137d iommu/amd: Report SEV-TIO support
The SEV-TIO switch in the AMD BIOS is reported to the OS via
the IOMMU Extended Feature 2 register (EFR2), bit 1.

Add helper to parse the bit and report the feature presence.

Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251202024449.542361-4-aik@amd.com
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2025-12-02 12:06:45 -08:00
Alexey Kardashevskiy
c3859de858 psp-sev: Assign numbers to all status codes and add new
Make the definitions explicit. Add some more new codes.

The following patches will be using SPDM_REQUEST and
EXPAND_BUFFER_LENGTH_REQUEST, others are useful for the PSP FW
diagnostics.

Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251202024449.542361-3-aik@amd.com
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2025-12-02 12:06:38 -08:00
Alexey Kardashevskiy
8a5dd102e4 ccp: Make snp_reclaim_pages and __sev_do_cmd_locked public
The snp_reclaim_pages() helper reclaims pages in the FW state. SEV-TIO
and the TMPM driver (a hardware engine which smashes IOMMU PDEs among
other things) will use to reclaim memory when cleaning up.

Share and export snp_reclaim_pages().

Most of the SEV-TIO code uses sev_do_cmd() which locks the sev_cmd_mutex
and already exported. But the SNP init code (which also sets up SEV-TIO)
executes under the sev_cmd_mutex lock so the SEV-TIO code has to use
the __sev_do_cmd_locked() helper. This one though does not need to be
exported/shared globally as SEV-TIO is a part of the CCP driver still.

Share __sev_do_cmd_locked() via the CCP internal header.

Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251202024449.542361-2-aik@amd.com
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2025-12-02 12:05:51 -08:00
Vincent Guittot
de45401e27 MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
Add a new entry for S32G PCIe controller driver.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: update to Ciprian Marian Costea per
https://lore.kernel.org/r/f38396c7-0605-4876-9ea6-0a179d6577c7@oss.nxp.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251121164920.2008569-5-vincent.guittot@linaro.org
2025-12-02 14:03:11 -06:00
Vincent Guittot
5cbc7d3e31 PCI: s32g: Add NXP S32G PCIe controller driver (RC)
Add initial support of the PCIe controller for the NXP S32G SoC family.
Only host mode is supported.

Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
[mani: replaced memblock_start_of_DRAM with hardcoded boundary addr]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251121164920.2008569-4-vincent.guittot@linaro.org
2025-12-02 14:03:11 -06:00
Vincent Guittot
045ad2c623 PCI: dwc: Add register and bitfield definitions
Add register and bitfield definitions:

  - GEN3_RELATED_OFF_EQ_PHASE_2_3 field of GEN3_RELATED_OFF

  - Coherency control registers

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251121164920.2008569-3-vincent.guittot@linaro.org
2025-12-02 14:03:11 -06:00
Vincent Guittot
0472132df8 dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
Describe the PCIe host controller available on the S32G platforms.

Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251121164920.2008569-2-vincent.guittot@linaro.org
2025-12-02 14:02:56 -06:00
Linus Torvalds
2ae20d6510 - Add support for AMD's Smart Data Cache Injection feature which allows
for direct insertion of data from I/O devices into the L3 cache, thus
   bypassing DRAM and saving its bandwidth; the resctrl side of the feature
   allows the size of the L3 used for data injection to be controlled
 
 - Add Intel Clearwater Forest to the list of CPUs which support Sub-NUMA
   clustering
 
 - Other fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmktpFQACgkQEsHwGGHe
 VUop4g/9GTb/5rcFMQzeGlG3USnJOqJ+SmiAalA9lm1c933en9tqUgL/K0C0xC6h
 yraB3ICuob1YayiZkBwKIOQiei9gmfhH/CGf5vLcZMM+D6fqvlk1D+C40SuFoDFV
 DOH3H2nYoJ3vbZRtRZsD3bv/djST/OVk28g7eY8OwpZIwN5VSFULJwjK1ePPy+nL
 l65s/yrgLY0oLDBCGxtJ9gVxjCBqAoqfbbwVbcJm5hXv+2sYk8BH6de/CU+0v/vo
 K6Qu4GbmWqDKYH9thjC4ZC/DPXjtoCxGkg/l1Af5T1PiZF0ZtgEZI6i9JTR33jYJ
 7j6BpkCwPzY07MKj/Ub1RemlMfY4XMN/qssEfFmnwG+aMBtbojNAjdb00Pu9Ffn+
 TKFKiZ6WBTcYhqPQsFVruwHh8wDbJp2/x/yBfjD4qovo1HuyCln4iGDmoFcU2wTD
 UlOXW89bxOT56A3FL77ElnOg9nRltvdKduOluGtkpSkmBbzmDfoXrhG2z9zuuAui
 FB6GT2c5MRVXEC4BY30xwQBG5MArVRMyz9uYDyXf9+KHhWVdmq9K0ZAkIaUmPCvy
 BvBXpRhfxm/dKJPhtSuUPhh5A+a87gqoiu1McaFoVGyjVJIJ5gflge8+/mLj1lQz
 kG56SnLOzdtcwKcmQ5ncv5EkrTBD1Ph12u1kcd+4IZwkpgGZteE=
 =o7Dg
 -----END PGP SIGNATURE-----

Merge tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 resource control updates from Borislav Petkov:

 - Add support for AMD's Smart Data Cache Injection feature which allows
   for direct insertion of data from I/O devices into the L3 cache, thus
   bypassing DRAM and saving its bandwidth; the resctrl side of the
   feature allows the size of the L3 used for data injection to be
   controlled

 - Add Intel Clearwater Forest to the list of CPUs which support
   Sub-NUMA clustering

 - Other fixes and cleanups

* tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fs/resctrl: Update bit_usage to reflect io_alloc
  fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks
  fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID
  fs/resctrl: Introduce interface to display io_alloc CBMs
  fs/resctrl: Add user interface to enable/disable io_alloc feature
  fs/resctrl: Introduce interface to display "io_alloc" support
  x86,fs/resctrl: Implement "io_alloc" enable/disable handlers
  x86,fs/resctrl: Detect io_alloc feature
  x86/resctrl: Add SDCIAE feature in the command line options
  x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement
  fs/resctrl: Consider sparse masks when initializing new group's allocation
  x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest
2025-12-02 11:55:58 -08:00
Linus Torvalds
2a47c26e55 - Add microcode staging support on Intel: it moves the sole microcode
blobs loading to a non-critical path so that microcode loading
   latencies are kept at minimum. The actual "directing" the hardware to
   load microcode is the only step which is done on the critical path.
   This scheme is also opportunistic as in: on a failure, the machinery
   falls back to normal loading
 
 - Add the capability to the AMD side of the loader to select one of two
   per-family/model/stepping patches: one is pre-Entrysign and the other
   is post-Entrysign; with the goal to take care of machines which
   haven't updated their BIOS yet - something they should absolutely do
   as this is the only proper Entrysign fix
 
 - Other small cleanups and fixlets
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmktjK4ACgkQEsHwGGHe
 VUqCzg/+NTMgw/cb6zvgXviUTTL62127q4YBr0G3AoNruYbWvdt65suK1pMoRUZL
 CDtflIjDTj8ZSIreXS6tUoFIAzsZUnPApUshHCXlHbK6hYbHDjQgkZme48P+AIqC
 kuP8zcqL0Epzv/Il/d9M8LEmP/0JUoACiibI5T0xMA5Ji9yw0njiHaHCBnrwXduy
 oNsTW8KSaGSaq+zbqa+cS7T06b6SNtUpAQyNSg4Jgj9u3+uPb3a9AfD81jGxUmYl
 SoM/gsiwYjujKV/ZAldnN6tOoRSECqeYLRT/J/Bbqe4zSM5gYh7TRg7N4AcZXKuY
 BLps8IbmiS6ZF2qziicJ7+zN35kXLeuVC+T4rq+IjvkTyH+eJsuGFnGYbXxCwV8A
 nkinSLtn6x0sebem/6H77OjNMLZU0zmLgWfiUfvgnXCErb7SZfs967aG8nxs5bDX
 CnEzS7/98sSkZm0yDSjp0TuXzo1PSGS9wcv30vOR4hClx42YmTZlBUJ5QHJQ9AB0
 1PNmLptwUk9rorTemAzB3Cstm490U7BEd32Od6b+NiIyKogL7uPJKHsQ2Q/t07tw
 ubBm5nFzIhCXWz9v5q1fkvInKAXytHdIN4OnzOPw+7jHF95Vpa2o22OBWaBaCRex
 96jCa4b6pPomxPD+LxdSSMtSihUa4PQz9VrrqnYn7vulumQ/YDo=
 =rxMs
 -----END PGP SIGNATURE-----

Merge tag 'x86_microcode_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 microcode loading updates from Borislav Petkov:

 - Add microcode staging support on Intel: it moves the sole microcode
   blobs loading to a non-critical path so that microcode loading
   latencies are kept at minimum. The actual "directing" the hardware to
   load microcode is the only step which is done on the critical path.

   This scheme is also opportunistic as in: on a failure, the machinery
   falls back to normal loading

 - Add the capability to the AMD side of the loader to select one of two
   per-family/model/stepping patches: one is pre-Entrysign and the other
   is post-Entrysign; with the goal to take care of machines which
   haven't updated their BIOS yet - something they should absolutely do
   as this is the only proper Entrysign fix

 - Other small cleanups and fixlets

* tag 'x86_microcode_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Mark early_parse_cmdline() as __init
  x86/microcode/AMD: Select which microcode patch to load
  x86/microcode/intel: Enable staging when available
  x86/microcode/intel: Support mailbox transfer
  x86/microcode/intel: Implement staging handler
  x86/microcode/intel: Define staging state struct
  x86/microcode/intel: Establish staging control logic
  x86/microcode: Introduce staging step to reduce late-loading time
  x86/cpu/topology: Make primary thread mask available with SMP=n
2025-12-02 11:35:49 -08:00
Alice Ryhl
5ba71195a9 rust_binder: use bitmap for allocation of handles
To find an unused Binder handle, Rust Binder currently iterates the
red/black tree from the beginning until it finds a gap in the keys. This
is extremely slow.

To improve the performance, add a bitmap that keeps track of which
indices are actually in use. This allows us to quickly find an unused
key in the red/black tree.

For a benchmark, please see the below numbers that were obtained from
modifying binderThroughputTest to send a node with each transaction and
stashing it in the server. This results in the number of nodes
increasing by one for every transaction sent. I got the following table
of roundtrip latencies (in µs):

Transaction Range │ Baseline (Rust) │ Bitmap (Rust) │ Comparison (C)
0 - 10,000        │          176.88 │         92.93 │          99.41
10,000 - 20,000   │          437.37 │         87.74 │          98.55
20,000 - 30,000   │          677.49 │         76.24 │          96.37
30,000 - 40,000   │          901.76 │         83.39 │          96.73
40,000 - 50,000   │         1126.62 │        100.44 │          94.57
50,000 - 60,000   │         1288.98 │         94.38 │          96.64
60,000 - 70,000   │         1588.74 │         88.27 │          96.36
70,000 - 80,000   │         1812.97 │         93.97 │          91.24
80,000 - 90,000   │         2062.95 │         92.22 │         102.01
90,000 - 100,000  │         2330.03 │         97.18 │         100.31

It should be clear that the current Rust code becomes linearly slower
per insertion as the number of calls to rb_next() per transaction
increases. After this change, the time to find an ID number appears
constant. (Technically it is not constant-time as both insertion and
removal scan the entire bitmap. However, quick napkin math shows that
scanning the entire bitmap with N=100k takes ~1.5µs, which is neglible
in a benchmark where the rountrip latency is 100µs.)

I've included a comparison to the C driver, which uses the same bitmap
algorithm as this patch since commit 15d9da3f81 ("binder: use bitmap
for faster descriptor lookup").

This currently checks if the bitmap should be shrunk after every
removal. One potential future change is introducing a shrinker to make
this operation O(1), but based on the benchmark above this does not seem
required at this time.

Reviewed-by: Burak Emir <bqe@google.com>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-12-02 14:17:47 -05:00
Alice Ryhl
f523d110a6 rust: id_pool: do not immediately acquire new ids
When Rust Binder assigns a new ID, it performs various fallible
operations before it "commits" to actually using the new ID. To support
this pattern, change acquire_next_id() so that it does not immediately
call set_bit(), but instead returns an object that may be used to call
set_bit() later.

The UnusedId type holds a exclusive reference to the IdPool, so it's
guaranteed that nobody else can call find_unused_id() while the UnusedId
object is live.

[Miguel: rust: id_pool: fix example]

Reviewed-by: Burak Emir <bqe@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-12-02 14:17:09 -05:00
Shi Hao
93b22a4bf0 fbdev: i810: use appopriate log interface dev_info
There were many printk log interfaces which do no had
any KERN_INFO with them and they can be replaced with
dev_info which will allow better log level handling
making messages clear and manageable.

No functional changes to the driver behavior are introduced.
Only the logging method has been replaced as per modern
kernel coding guidelines.

Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-12-02 20:15:51 +01:00
Alice Ryhl
69ec6a1bed rust: id_pool: do not supply starting capacity
Rust Binder wants to use inline bitmaps whenever possible to avoid
allocations, so introduce a constructor for an IdPool with arbitrary
capacity that stores the bitmap inline.

The existing constructor could be renamed to with_capacity() to match
constructors for other similar types, but it is removed as there is
currently no user for it.

[Miguel: rust: id_pool: fix broken intra-doc link]

Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Burak Emir <bqe@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
2025-12-02 14:14:50 -05:00
Pavel Begunkov
9954464d73 net: page_pool: sanitise allocation order
We're going to give more control over rx buffer sizes to user space, and
since we can't always rely on driver validation, let's sanitise it in
page_pool_init() as well. Note that we only need to reject over
MAX_PAGE_ORDER allocations for normal page pools, as current memory
providers don't need to use the buddy allocator and must check the order
on init.i

Suggested-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/77ad83c1aec66cbd00e7b3952f74bc3b7a988150.1764542851.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-02 11:08:39 -08:00
Pavel Begunkov
854858848b net: page pool: xa init with destroy on pp init
The free_ptr_ring label path initialises ->dma_mapped xarray but doesn't
destroy it in case of an error. That's not a real problem since init
itself doesn't do anything requiring destruction, but still match it
with xa_destroy() to silence warnings.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/02904c6d83dbe5cc1c671106a5c97bd93ab31006.1764542851.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-02 11:08:39 -08:00
Javier Garcia
af0fa9b449 fbdev: tridentfb: replace printk() with dev_*() in probe
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-12-02 20:08:35 +01:00
Linus Torvalds
a61288200e - The second part of the AMD MCA interrupts rework after the last-minute
show-stopper from the last merge window was sorted out. After this,
   the AMD MCA deferred errors, thresholding and corrected errors
   interrupt handlers use common MCA code and are tightly integrated
   into the core MCA code, thereby getting rid of considerable
   duplication. All culminating into allowing CMCI error thresholding
   storms to be detected at AMD too, using the common infrastructure
 
 - Add support for two new MCA bank bits on AMD Zen6 which denote whether
   the error address logged is a system physical address, which obviates
   the need for it to be translated before further error recovery can be
   done
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmktlV8ACgkQEsHwGGHe
 VUrfGRAAsoVknP8SPap1dFpT82+avi7knEnZ56zuwCxjXOSlXDbvsrAUFsS8Io4o
 sf60gyUnFEFLW551qXUJoSnuSjf0S63tKmnX6ebUXtxe6mVC5Y0l3VGHz8/ymbCV
 8tLFF1yx6qMEwE2WutuIIeKGdZjn4lpg2lvhtaZnzeUSBk/BQcANjPaVYKQZPx/Q
 mXqpfvJnEBxkP6gy9VlrKxkpPyR0obD2/RFcN1M5dEbk0q52KNtcwyjblYR2XmNB
 7SVmwAcRkH+7Icp14XgHZamAs9NMdAShaQ7Rov7OjEucTnot+Q5BO/3ftvFOzvGu
 GHiY4rSew6QtKv4MWIYVHGrxIm6o6Sco7EFmESEC9UDX/Ck60WAj1LY6v6jKEF0g
 nnbqxO1hoD0ygNApBXMYleut8eqiriJlXCrImlaldkG8iQqsmf11kEHagS9EVtk0
 X28/eCoyD14a90NqmY13hBf2xscU41jy+LxdYy7sisL3LC4rhGgBpE/5vd/Ynnlf
 HELeQA8/5bIOgcbVvOIFxQGC+pBwhrHxIIOF0Z6pJZzznUO2cTUepJaLgWXdne7P
 EFE30+tDfeIy/bbB6CmkPV19NW3jNlkZib28t7L9uMCShPKiaza+Qv0SgzfeEy6t
 IERhzgmPxJiJ/7fOtdCUDL8YTlisiZ9t9RbSKNbriL54JHjX+Mc=
 =TY7F
 -----END PGP SIGNATURE-----

Merge tag 'ras_core_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 RAS updates from Borislav Petkov:

 - The second part of the AMD MCA interrupts rework after the
   last-minute show-stopper from the last merge window was sorted out.
   After this, the AMD MCA deferred errors, thresholding and corrected
   errors interrupt handlers use common MCA code and are tightly
   integrated into the core MCA code, thereby getting rid of
   considerable duplication. All culminating into allowing CMCI error
   thresholding storms to be detected at AMD too, using the common
   infrastructure

 - Add support for two new MCA bank bits on AMD Zen6 which denote
   whether the error address logged is a system physical address, which
   obviates the need for it to be translated before further error
   recovery can be done

* tag 'ras_core_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Handle AMD threshold interrupt storms
  x86/mce: Do not clear bank's poll bit in mce_poll_banks on AMD SMCA systems
  x86/mce: Add support for physical address valid bit
  x86/mce: Save and use APEI corrected threshold limit
  x86/mce/amd: Define threshold restart function for banks
  x86/mce/amd: Remove redundant reset_block()
  x86/mce/amd: Support SMCA Corrected Error Interrupt
  x86/mce/amd: Enable interrupt vectors once per-CPU on SMCA systems
  x86/mce: Unify AMD DFR handler with MCA Polling
  x86/mce: Unify AMD THR handler with MCA Polling
2025-12-02 11:04:37 -08:00
Neilay Kharwadkar
b08ee4d666 lib/fonts: Add Terminus 10x18 console font
Add a compile-in option for Terminus 10x18 bitmap console font
to improve readability on modern laptop displays.

On modern 13-16 inch laptop displays with high pixel density,
common scaled resolutions like 1280x800 and 1440x900 are widely
used.

At these resolutions, VGA 8x16 is too small and difficult to
read for extended periods, while Terminus 16x32 is too large,
providing only 25-28 rows. The existing 10x18 font has poor
readability.

Terminus 10x18 provides improved readability with its clean,
fixed-width design while maintaining practical row counts
(44-50 rows).

A comfortable and readable built-in font for early boot messages,
kernel panics or whenever userspace is unavailable.

The font was converted from standard Terminus ter-i18b.psf using
psftools and formatted to match kernel font conventions.

This patch is non-intrusive, no options are enabled by default
so most users won't notice a thing.

Signed-off-by: Neilay Kharwadkar <neilaykharwadkar@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-12-02 19:57:01 +01:00
Thorsten Blum
0155e868cb fbdev: pxafb: Fix multiple clamped values in pxafb_adjust_timing
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().

Cc: stable@vger.kernel.org
Fixes: 3f16ff608a ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-12-02 19:49:10 +01:00
Linus Torvalds
49219bba01 - imh_edac: Add a new EDAC driver for Intel Diamond Rapids and
future incarnations of this memory controllers architecture
 
 - amd64_edac: Remove the legacy csrow sysfs interface which has been
   deprecated and unused (we assume) for at least a decade
 
 - Add the capability to fallback to BIOS-provided address translation
   functionality (ACPI PRM) which can be used on systems unsupported by
   the current AMD address translation library
 
 - The usual fixes, fixlets, cleanups and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmktdyMACgkQEsHwGGHe
 VUpXTxAAhdQxn1v1tYKya6YHxBS3T3Y3+4fec+LeKgoY1YnoFHMse3TAU+G67opR
 1xnEKHKrkX4v1FAwe7eD2G6qyz2ytqcApv4XGxmQ1WgldFWuPl/lI3ngPNMCHMog
 dqeQFRQ7MXsk0no0cjMA6NjafFpYOGGGhIzdU3wvgZawH4hG9wHLS6Urvn2SfWj6
 Pf/449qS7XoPU5G22qWPqqixRHpc9BPkJfKMIYeaWbxldePlwbh9cOMLqwsZo1QV
 v5cv/3CAIVFzRvNVIx05kDhRrwqTjIZL+u9IYHg2g9DA45GQuktYQwd1KksbVpUn
 CijhpKMoSnQHN+ZLW84XzvEH2rvroSTZl28d5suY1GHXG3ePc9HpmTVbVElFXWKZ
 dq0X2RIbMEbSxneePFHJ4ESUfNN2HbPSfh/sXN4epxcMQI0VWVhXYs5+Ek4UV1+E
 hvhCS/kuAypODzEi0cULoMcXdyKr2V1zpaAHNlZshepp/kUzY46b3cBhxKiL3Fsd
 x+IhZgow9a+iMJfMpCJhMABKEkoZRgS3gs5nWMJ6t0EvulvknG+aovGB/Q0VaIIa
 H69Fn+R2ewnEuZf1JGZDMit1y+wjGgeamk+uWTym+tCyNH1eHaSq48POribajcYF
 UtcobK4kG7hPodsbwwD4MhqtSLhuyIcXTHbI3x4+r+LLAgdAPKM=
 =NidS
 -----END PGP SIGNATURE-----

Merge tag 'edac_updates_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Borislav Petkov:

 - imh_edac: Add a new EDAC driver for Intel Diamond Rapids and future
   incarnations of this memory controllers architecture

 - amd64_edac: Remove the legacy csrow sysfs interface which has been
   deprecated and unused (we assume) for at least a decade

 - Add the capability to fallback to BIOS-provided address translation
   functionality (ACPI PRM) which can be used on systems unsupported by
   the current AMD address translation library

 - The usual fixes, fixlets, cleanups and improvements all over the
   place

* tag 'edac_updates_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  RAS/AMD/ATL: Replace bitwise_xor_bits() with hweight16()
  EDAC/igen6: Fix error handling in igen6_edac driver
  EDAC/imh: Setup 'imh_test' debugfs testing node
  EDAC/{skx_comm,imh}: Detect 2-level memory configuration
  EDAC/skx_common: Extend the maximum number of DRAM chip row bits
  EDAC/{skx_common,imh}: Add EDAC driver for Intel Diamond Rapids servers
  EDAC/skx_common: Prepare for skx_set_hi_lo()
  EDAC/skx_common: Prepare for skx_get_edac_list()
  EDAC/{skx_common,skx,i10nm}: Make skx_register_mci() independent of pci_dev
  EDAC/ghes: Replace deprecated strcpy() in ghes_edac_report_mem_error()
  EDAC/ie31200: Fix error handling in ie31200_register_mci
  RAS/CEC: Replace use of system_wq with system_percpu_wq
  EDAC: Remove the legacy EDAC sysfs interface
  EDAC/amd64: Remove NUM_CONTROLLERS macro
  EDAC/amd64: Generate ctl_name string at runtime
  RAS/AMD/ATL: Require PRM support for future systems
  ACPI: PRM: Add acpi_prm_handler_available()
  RAS/AMD/ATL: Return error codes from helper functions
2025-12-02 10:45:50 -08:00
René Rebe
35fa2b4bf9 fbdev: tcx.c fix mem_map to correct smem_start offset
403ae52ac0 ("sparc: fix drivers/video/tcx.c warning") changed the
physbase initializing breaking the user-space mmap, e.g. for Xorg
entirely.

Fix fbdev mmap table so the sbus mmap helper work correctly, and
not try to map vastly (physbase) offset memory.

Fixes: 403ae52ac0 ("sparc: fix drivers/video/tcx.c warning")
Cc: <stable@vger.kernel.org>
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-12-02 19:44:05 +01:00
Linus Torvalds
7f8d5f70ff Tree wide cleanup of the remaining users of in_irq() which got replaced
by in_hardirq() and marked deprecated in 2020.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmkvDhUTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoW+XD/959KAIm2JpcEYUWuNBmlhEyuYWvPLw
 ZyOiraLYBNyWmfCO/Yz4Ff8VZSR9gdWQoNfvBb8uxkbSXa0UOEUhCbzWsuoTnqR5
 ObTIHCJ9QmPlRiFDvs4Sf5TGmy/4nXh6/PoH3JykNdlD3rZMTxiAz/k6QuO/S2iu
 ykA+DNtNL7jDkQHzrWa3rf597BkBN1Z+hUD8zHRt8LYKRfmLYWjCMggjPLMnuqcn
 240fnV/FubCLd9f5ZgNxHQMQCQH2qB7GYMk08YwXwCZQqIIXWqbNnhedkkNO3kWq
 Sws4TEO6yg9pgTFqkuiDU5QgYEboRY4pDT45KSkdTHHGZl2OAAl3eVIGCto72UEI
 Eyzn4k900hZ1iI/Rad5mx3D4XJZEXFgEbXhjph0odn6jVvmSj+Fmg3J67u1niO2a
 obzB+xeaIkbGNQIgJFy8+A9SSnZckvuPlXdZdUxS2S95zH7f9+vBY8HWJMuyursa
 3AJAKa82mN1i3A9FdSuMTdttQWkDmrwPKVzxvixs1mBu7kB70XaRIKsPjZj7LH6X
 CiqP9Kt5FO0hVA7K+nKTeUA5DdjB4HzYzOgMqzFUhExY3hksVsj8rQEO6B0bCp9t
 CfITA3BvU7GXxhXZHOq3dABQ21J/ZHgeuK3QdQSnOxSQOv2ElYIdKvYirJy2QdS1
 tSM3O3GXb4zWDg==
 =6LKf
 -----END PGP SIGNATURE-----

Merge tag 'core-core-2025-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core irq cleanup from Thomas Gleixner:
 "Tree wide cleanup of the remaining users of in_irq() which got
  replaced by in_hardirq() and marked deprecated in 2020"

* tag 'core-core-2025-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  treewide: Remove in_irq()
2025-12-02 10:18:49 -08:00
Gustavo Sousa
4d7f266e68 drm/i915/display: Use HAS_LT_PHY() for LT PHY AUX power
Bspec states that the new AUX power enable/disable sequences are
associated with the LT PHY.  As such, use HAS_LT_PHY() instead of IP
checks in those paths in the driver code.

While at it, also move the comment that we can't use the power status
flag to the "else" branch, since that comment is not applicable for the
LT PHY.

Bspec: 68967
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-9-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-12-02 10:08:08 -08:00
Gustavo Sousa
97afa2da35 drm/i915/display: Move HAS_LT_PHY() to intel_display_device.h
We will need to HAS_LT_PHY() that macro in code outside of LT PHY
implementation. Move its definition to intel_display_device.h.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-8-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-12-02 10:08:08 -08:00
Gustavo Sousa
532f6f602e drm/i915/display: Use platform check in HAS_LT_PHY()
NVL uses the Lake Tahoe PHY for display output and the driver recently
added the macro HAS_LT_PHY() to allow selecting code paths specific for
that type of PHY.

While NVL uses Xe3p_LPD as display IP, the type of PHY is actually
defined at the SoC level, so use a platform check instead of display
version.

Bspec: 74199
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-7-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-12-02 10:08:08 -08:00
Sai Teja Pottumuttu
8fad54133b drm/i915/nvls: Add NVL-S display support
Add platform description and PCI IDs for NVL-S.

BSpec: 74201
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-6-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-12-02 10:08:08 -08:00
Gustavo Sousa
df96701916 drm/i915/xe3p_lpd: Handle underrun debug bits
Xe3p_LPD added several bits containing information that can be relevant
to debugging FIFO underruns.  Add the logic necessary to handle them
when reporting underruns.

This was adapted from the initial patch[1] from Sai Teja Pottumuttu.

[1] https://lore.kernel.org/all/20251015-xe3p_lpd-basic-enabling-v1-12-d2d1e26520aa@intel.com/

v2:
  - Handle FBC-related bits in intel_fbc.c. (Ville)
  - Do not use intel_fbc_id_for_pipe (promoted from
    skl_fbc_id_for_pipe), but use pipe's primary plane to get the FBC
    instance. (Ville, Matt)
  - Improve code readability by moving logic specific to logging fields
    of UNDERRUN_DBG1 to a separate function. (Jani)

v3:
  - Use crtc->base.primary instead of cycling through all crtcs

Bspec: 69111, 69561, 74411, 74412
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-5-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-12-02 10:08:08 -08:00