The driver has never supported anything but OF probe so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120164907.28007-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There seems to be nothing preventing the driver from being compile
tested so enable that for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120115016.8967-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251120114524.8431-10-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not support anything but OF probe since commit
3b0f4a54f2 ("dma:mmp_tdma: get sram pool through device tree").
Commit a67ba97dfb ("dmaengine: Use device_get_match_data()") later
removed most remnants of platform probing except for an unnecessary OF
node check in remove().
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-8-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not support anything but OF probe since commit
3b0f4a54f2 ("dma:mmp_tdma: get sram pool through device tree") so drop
the unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-7-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251120114524.8431-5-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251120114524.8431-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not support anything but OF and ACPI probe since commit
b3757413b9 ("dmaengine: dw: platform: Use struct dw_dma_chip_pdata")
so drop the unused platform module alias along with the now unnecessary
driver name define.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251120114524.8431-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allows the buildbot to detect potential issues with the code on various
platforms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://patch.msgid.link/20251106022405.85604-3-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
size_t formats under 32-bit evaluate to the same thing and GCC does not
warn against it. Not the case with 64-bit.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://patch.msgid.link/20251106022405.85604-2-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
This completes 3bc3c9c3ab ("bugs/core: Pass down the condition
string of WARN_ON_ONCE(cond) warnings to __WARN_FLAGS()") and makes
WARN_ON() and WARN_ON_ONCE() behaviour consistent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.690999560@infradead.org
Add a report_bug() variant where the bug_entry is already known. This
is useful when the exception instruction is not instantiated per-site.
But instead has a single instance. In such a case the bug_entry
address might be passed along in a known register or something.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.575795595@infradead.org
Add BUG_FORMAT_ARGS; when an architecture is able to provide a va_list
given pt_regs, use this to print format arguments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.457339417@infradead.org
Three repeated CONFIG_GENERIC_BUG_RELATIVE_POINTERS #ifdefs right
after one another yields unreadable code. Add a helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.341703850@infradead.org
Add BUG_FORMAT; an architecture opt-in feature that allows adding the
WARN_printf() format string to the bug_entry table.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.223371452@infradead.org
Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
The sole user of the remaining functions in intel_gmch.[ch] is in
intel_vga.c. Move everything there.
Since intel_gmch.c hasn't been part of xe, use a dummy function
relocated from xe_display_misc.c, with #ifdef. This is purely to keep
this change non-functional.
This allows us to remove soc/intel_gmch.[ch] from i915, compat
soc/intel_gmch.h from xe, and xe_display_misc.c from xe.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/b0f853ad7eae686738defa9e8f08a8848df8f226.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert intel_gmch.[ch] to struct intel_display. Remove the final
dependency on struct drm_i915_private and i915_drv.h. This is in
preparation of moving the code under display/.
intel_gmch_vga_set_state() is only used internally, make it static while
at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/a4b317656eef0781d4f53ae337083fb05ce602bc.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The sole user of intel_rom.[ch] has always been in display. Move them
under display.
This allows us to remove the compat soc/intel_rom.h from xe, as well as
the Makefile rules to build anything from soc/.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/352ec255a6e9b81c7d1e35d8fbf7018d4049d4d3.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert everything except uncore access to struct
intel_display. Converting the graphics version checks to display version
checks needs a tweak for display version 13, which have graphics version
12.
While at it, convert logging to drm_dbg_kms().
v2: Handle display version 13
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251120161846.3128999-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The i915 core only needs three rather specific functions from
soc/intel_dram.[ch]: i9xx_fsb_freq(), ilk_fsb_freq(), and
ilk_mem_freq(). Add new i915_freq.[ch] and duplicate those functions for
i915 to reduce the dependency on soc/ code.
Wile duplication in general is bad, here it's a tradeoff to simplify the
i915, xe and display interactions.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7bac1b194afdc20cd45e625a0a32fcbcd0b1136e.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While edram detection ostensibly belongs with the rest of the dram stuff
in soc/intel_dram.c, it's only required by i915 core, not
display. Extract it to a separate i915_edram.[ch] file.
This allows us to drop the edram_size_mb member from struct xe_device.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/612edb7b70755655fbf193ba8af1c539fb93b698.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the parsed ELD has spk_alloc=0, it currently assigns the parsed ELD
spk_alloc to 0xffff. However, we should also check if there is at least
one SAD (Short audio descriptor) to enforce the assumption, as ELD
without any sad_count, is usually considered invalid for e.g. in
commit ce9778b7a0272("ALSA: hda/hdmi: Consider ELD is invalid when no
SAD is present").
Signed-off-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20251120141757.901505-1-uajain@igalia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The VSIE code currently checks that the BSCA struct fits within
a page, and returns a validity exception 0x003b if it doesn't.
The BSCA is pinned in memory rather than shadowed (see block
comment at end of kvm_s390_cpu_feat_init()), so enforcing the
CPU entries to be on the same pinned page makes sense.
Except those entries aren't going to be used below the guest,
and according to the definition of that validity exception only
the header of the BSCA (everything but the CPU entries) needs to
be within a page. Adjust the alignment check to account for that.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Starting with Zen6, AMD's Scalable MCA systems will incorporate two new bits in
MCA_STATUS and MCA_CONFIG MSRs. These bits will indicate if a valid System
Physical Address (SPA) is present in MCA_ADDR.
PhysAddrValidSupported bit (MCA_CONFIG[11]) serves as the architectural
indicator and states if PhysAddrV bit (MCA_STATUS[54]) is Reserved or if it
indicates validity of SPA in MCA_ADDR.
PhysAddrV bit (MCA_STATUS[54]) advertises if MCA_ADDR contains valid SPA or if
it is implementation specific.
Use and prefer MCA_STATUS[PhysAddrV] when checking for a usable address.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251118191731.181269-1-avadhut.naik@amd.com
The MCA threshold limit generally is not something that needs to change during
runtime. It is common for a system administrator to decide on a policy for
their managed systems.
If MCA thresholding is OS-managed, then the threshold limit must be set at
every boot. However, many systems allow the user to set a value in their BIOS.
And this is reported through an APEI HEST entry even if thresholding is not in
FW-First mode.
Use this value, if available, to set the OS-managed threshold limit. Users
can still override it through sysfs if desired for testing or debug.
APEI is parsed after MCE is initialized. So reset the thresholding blocks
later to pick up the threshold limit.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20251104-wip-mca-updates-v8-0-66c8eacf67b9@amd.com
Comparing to exactly 1 will fail if more than one ring buffer
event was seen since the last call to timerlat_bpf_wait(), which
can happen in some race scenarios.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-5-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The timerlat "top stop at failed action" test was relying on "ALL" being
printed immediately after the "1" from the threshold action. Besides being
fragile, this depends on stdbuf behavior, which is easy to miss when
recreating the test outside of the framework for debugging purposes.
Instead, use the expected/unexpected text mechanism from the
corresponding osnoise test.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-2-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
When running rtla as
`rtla <timerlat|osnoise> <top|hist> -t custom_file.txt -a 100`
-a options override trace output filename specified by -t option.
Running the command above will create <timerlat|osnoise>_trace.txt file
instead of custom_file.txt. Fix this by making sure that -a option does
not override trace output filename even if it's passed after trace
output filename is specified.
Fixes: 173a3b0148 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/b6ae60424050b2c1c8709e18759adead6012b971.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Currently, user can only specify cgroup to the tracer's thread the
following ways:
`-C[cgroup]`
`-C[=cgroup]`
`--cgroup[=cgroup]`
If user tries to specify cgroup as `-C [cgroup]` or `--cgroup [cgroup]`,
the parser silently fails and rtla's cgroup is used for the tracer
threads.
To make interface more user-friendly, allow user to specify cgroup in
the aforementioned way, i.e. `-C [cgroup]` and `--cgroup [cgroup]`.
Refactor identical logic between -t/--trace and -C/--cgroup into a
common function.
Change documentation to reflect this user interface change.
Fixes: a957cbc025 ("rtla: Add -C cgroup support")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/16132f1565cf5142b5fbd179975be370b529ced7.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace osnoise_hist_usage("...") with fatal("...") on errors.
Remove the already unused 'usage' argument from osnoise_hist_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-6-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace osnoise_top_usage("...") with fatal("...") on errors.
Remove the already unused 'usage' argument from osnoise_top_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-5-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace timerlat_hist_usage("...\n") with fatal("...") on errors.
Remove the already unused 'usage' argument from timerlat_hist_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-4-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace timerlat_top_usage("...\n") with fatal("...") on errors.
Remove the already unused 'usage' argument from timerlat_top_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-3-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The code contains some technical debt in error handling,
which complicates the consolidation of duplicated code.
Introduce an fatal() function to replace the common pattern of
err_msg() followed by exit(EXIT_FAILURE), reducing the length of an
already long function.
Further patches using fatal() follow.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-2-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>