Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc7
Here are various unrelated fixes:
- Patch 1: fix missing wakeups when multiple threads are reading from
the same fd. A fix for v5.7.
- Patch 2: fix retransmission loop when MPTCP checksum is enabled. A fix
for v5.14.
- Patch 3: fix a TOCTOU race while computing rcv_wnd. A fix for v5.11.
- Patch 4: allow subflows receive window to shrink if needed. A fix for
v5.19.
- Patches 5-6: avoid 'extra_subflows' to underflow with the userspace
PM. A fix for v5.19.
- Patch 7: report errors if one subflow cannot set SO_TIMESTAMPING. A
fix for v5.14.
- Patch 8: try to set TCP_MAXSEG on all subflows, before reporting
errors, if any. A fix for v6.17.
- Patch 9: check desc->count in read_sock, to act as expected. A fix
for v7.0.
- Patch 10: fix an uninit value in mptcp_established_options, reported
by syzbot. A fix for v7.1-rc1.
- Patch 11: fix a similar issue than the previous patch, exposed by the
same modification from v7.1-rc1, but was already causing issues since
v5.15.
====================
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-0-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of passing opt_size address to mptcp_established_options(),
change this function to return it by value.
This removes the need for an expensive stack canary in
tcp_established_options() when CONFIG_STACKPROTECTOR_STRONG=y.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-92 (-92)
Function old new delta
tcp_options_write.isra 1423 1407 -16
mptcp_established_options 2746 2720 -26
tcp_established_options 553 503 -50
Total: Before=22110750, After=22110658, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602125138.2317015-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR needs to be sent, it could be prepared if there is
enough remaining space and even if the packet is not a pure ACK. But it
would be dropped soon after.
Indeed, in mptcp_pm_add_addr_signal(), there is enough space to fit a
DSS of 20 octets and an ADD_ADDR echo containing an IPv4 address on 8
octets for example. In this case, the packet would be prepared, the
MPTCP_ADD_ADDR_ECHO bit would be removed from pm->addr_signal, but the
option would be silently dropped in mptcp_established_options_add_addr()
not to override DSS info in the union from 'struct mptcp_out_options',
and also because mptcp_write_options() will enforce mutually exclusion
with DSS.
Instead, don't even try to send an ADD_ADDR if it is not a pure ACK.
Retry for each new packet until a pure-ACK is emitted. That's fine to do
that, because each time an ADD_ADDR (echo) is scheduled, a pure ACK is
queued.
This also simplifies the code, and the skb checks can be done earlier,
before the lock.
Note: also, since commit 6d0060f600 ("mptcp: Write MPTCP DSS headers
to outgoing data packets"), opts->ahmac would not have been set to 0
when other suboptions were not dropped, and when sending an ADD_ADDR
echo. That would have resulted in sending an ADD_ADDR using garbage
info, where there was not enough space, instead of an echo one without
the ADD_ADDR HMAC.
Fixes: 1bff1e43a3 ("mptcp: optimize out option generation")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-11-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__tcp_read_sock() checks desc->count after each skb is consumed and
breaks the loop when it reaches 0. The MPTCP variant lacks this check.
This is a functional bug, other subsystems also rely on this check:
TLS strparser sets desc->count to 0 once a full TLS record is assembled
and depends on this break to stop reading.
Add the same desc->count check to __mptcp_read_sock(), mirroring
__tcp_read_sock().
Fixes: 250d9766a9 ("mptcp: implement .read_sock")
Cc: stable@vger.kernel.org
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-9-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp_setsockopt_all_sf(), currently used only with TCP_MAXSEG,
stopped when one subflow returned an error.
Even if it is not wrong, this is different from the other helpers trying
to set the option on all subflows, and then returning an error if at
least one of them had an issue.
Follow this behaviour, for a question of uniformity.
Fixes: 51c5fd09e1 ("mptcp: add TCP_MAXSEG sockopt support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-8-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test to verify that when userspace PM fails to create a subflow
(e.g. using an unreachable address), the extra_subflows counter is not
decremented below zero.
Fixes: 77e4b94a3d ("mptcp: update userspace pm infos")
Cc: stable@vger.kernel.org
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-6-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The userspace PM increments extra_subflows after __mptcp_subflow_connect()
succeeds, but __mptcp_subflow_connect() calls mptcp_pm_close_subflow()
on failure to roll back the pre-increment done by the kernel PM's fill_*()
helpers. Because the userspace PM hasn't incremented yet at that point,
this decrement is spurious and causes extra_subflows to underflow.
Fix it by aligning the userspace PM with the kernel PM: increment
extra_subflows before calling __mptcp_subflow_connect(), so the existing
error path in subflow.c correctly rolls it back on failure. Also simplify
the error handling by taking pm.lock only when needed for cleanup.
Fixes: 77e4b94a3d ("mptcp: update userspace pm infos")
Cc: stable@vger.kernel.org
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-5-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting.
Fixes: f3589be0c4 ("mptcp: never shrink offered window")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-4-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack.
Fixes: fa3fe2b150 ("mptcp: track window announced to peer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-3-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko noted that retransmission with csum enabled can actually
transmit new data, but currently the relevant code does not update
accordingly snd_nxt.
The may cause incoming ack drop and an endless retransmission loop.
Address the issue incrementing snd_nxt as needed.
Fixes: 4e14867d5e ("mptcp: tune re-injections for csum enabled mode")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-2-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp_recvmsg() can fill MPTCP socket receive queue via
mptcp_move_skbs(), but currently does not try to wakeup any listener,
because the same process is going to check the receive queue soon.
When multiple threads are reading from the same fd, the above can
cause stall. Add the missing wakeup.
Fixes: 6771bfd9ee ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-1-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "ibm,phandle" thing only seems to be needed on pseries
machines but everyone gets it so they get a string and a little
bit of useless code.
In __of_attach_node() the pseries specific part uses
IS_ENABLED(CONFIG_PPC_PSERIES) so do that here too.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20260603151809.3256280-1-daniel@thingy.jp
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The usage of PTP vClocks leads immediately to the following issues with
ptp4l with LOCKDEP and DEBUG_ATOMIC_SLEEP enabled: "BUG: sleeping function
called from invalid context".
ptp_convert_timestamp() acquires a mutex_t within a RCU read section. This
is illegal, because acquiring a mutex_t can result in voluntary scheduling
request which is not allowed within a RCU read section.
Replace the RCU usage with SRCU where sleeping is allowed.
Reported-by: Florian Zeitz <florian.zeitz@schettke.com>
Closes: https://lore.kernel.org/all/00a8cce8-410e-4038-98af-49be6d93d7bd@schettke.com/
Fixes: 67d93ffc0f ("ptp: vclock: use mutex to fix "sleep on atomic" bug")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260529-vclock_rcu-v2-1-02a5531fab92@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 can not be a module anymore, we no longer need to export:
- raw_hash_sk()
- raw_unhash_sk()
- raw_abort()
- raw_seq_start()
- raw_seq_next()
- raw_seq_stop()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260602165036.2712408-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Tamir Shahar <tamirthesis@gmail.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260602161547.2642155-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianyu Li says:
====================
af_unix: Fix inq_len update issue
From: Jianyu Li <jianyu.li@mediatek.com>
This series fix the problem that inq_len is inconsistent with
actual remaining byte count when only part of a skb is consumed.
====================
Link: https://patch.msgid.link/20260601113640.231897-1-jianyu.li@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test to verify that when a skb is partially consumed,
unix_inq_len() return correct remaining byte count.
Before:
# RUN scm_inq.stream.partial_read ...
# scm_inq.c:165:partial_read:Expected remain (512) == *(int *)CMSG_DATA(cmsg) (768)
# partial_read: Test terminated by assertion
# FAIL scm_inq.stream.partial_read
not ok 2 scm_inq.stream.partial_read
After:
# RUN scm_inq.stream.partial_read ...
# OK scm_inq.stream.partial_read
ok 2 scm_inq.stream.partial_read
Signed-off-by: Jianyu Li <jianyu.li@mediatek.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260601113640.231897-3-jianyu.li@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently inq_len is updated only when the whole skb is consumed.
If only part of the data is read, following SIOCINQ query would
get value greater than what actually left.
This change update inq_len timely in unix_stream_read_generic(),
and adjust unix_stream_read_skb() accordingly to prevent
repetitive update.
Fixes: f4e1fb04c1 ("af_unix: Use cached value for SOCK_STREAM in unix_inq_len().")
Signed-off-by: Jianyu Li <jianyu.li@mediatek.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260601113640.231897-2-jianyu.li@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch scx_bpf_kick_cid() from void to s32 so future cap enforcement can
surface failures. cid interface is introduced in this cycle and has no
external users, so the ABI change is safe. Subsequent patches will add
-EPERM returns when the calling sub-sched lacks the required cap on the
target cid.
v2: Return scx_cid_to_cpu()'s errno instead of -EINVAL. (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add single-bit test and iterator over set cids in an scx_cmask.
v2: Bound scx_cmask_for_each_cid() to the active span. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The BPF arena single-cid cmask helpers take the cmask first and the cid
second. Reorder them to (cid, mask) to match the kernel-side helpers and
the test_bit(nr, addr), cpumask_test_cpu(cpu, mask) convention. Range and
iteration helpers keep (mask, start).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
__scx_cmask_set(), __scx_cmask_contains() and __scx_cmask_word() take the
cmask first and the cid second. The kernel's bit and cpumask predicates put
the index first: test_bit(nr, addr), cpumask_test_cpu(cpu, mask). Reorder
the cmask helpers to (cid, mask) for consistency, ahead of new single-cid
ops added next. Mask-level ops (and/or/andnot/copy/subset/intersects) keep
(dst, src).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
NPC mcam entry stores a mapping between mcam entry and target pcifunc.
During initialization of this field, API kmalloc_array has been used which
caused some junk values to array. Whereas, the array is expected to be
initialized by 0. This patch fixes the same by using kcalloc instead of
kmalloc_array.
Fixes: 55307fcb92 ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1780054625-17090-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On system reboot "rvu_nicpf 0002:03:00.0: NDC sync operation failed"
error messages are shown, even if the operations is successful.
This is due to wrong if error check in ndc_syc() function.
Fixes: 42c45ac141 ("octeontx2-af: Sync NIX and NPA contexts from NDC to LLC/DRAM")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1780054677-17249-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aarp_alloc() allocates struct aarp_entry without zeroing it, but only
initializes refcnt and packet_queue. When an unresolved AARP entry is
created, hwaddr[ETH_ALEN] is left uninitialized.
aarp_seq_show() later prints this field with %pM when users read
/proc/net/atalk/arp. This can expose 6 bytes of stale heap data for
each unresolved entry.
Fix this by zero-initializing struct aarp_entry at allocation time.
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260529105017.81531-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
geneve: Allow binding UDP socket to a specific address.
By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
This series introduces two options to specify local IPv4 or IPv6
addresses for a GENEVE device.
====================
Link: https://patch.msgid.link/20260602190436.139591-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6,
to allow specifying a local IPv4/IPv6 address for the backend UDP
socket.
By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA)
is enabled, both IPv4 and IPv6 sockets are created. However, if a
source address is specified via the new attributes, only a single
socket corresponding to that specific address family is created.
Accordingly, geneve_find_sock() and geneve_find_dev() are updated to
take the source address into account, ensuring that multiple devices
and sockets configured with different source addresses can coexist
without conflict.
In addition, the source address is validated in geneve_xmit_skb()
and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key.
With this change, multiple GENEVE devices can be successfully created
and bound to their respective local IP addresses:
(*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6
# for i in $(seq 1 2);
do
ip link add geneve4_${i} type geneve local 192.168.0.${i} external
ip addr add 192.168.0.${i}/24 dev geneve4_${i}
ip link set geneve4_${i} up
ip link add geneve6_${i} type geneve local 2001:9292::${i} external
ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad
ip link set geneve6_${i} up
done
# ip -d l | grep geneve
9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.1 ...
10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::1 ...
11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.2 ...
12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::2 ...
# ss -ua | grep geneve
UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:*
UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:*
UNCONN 0 0 [2001:9292::2]:geneve *:*
UNCONN 0 0 [2001:9292::1]:geneve *:*
Note that even if the local address is explicitly configured with
the wildcard address, kernel does not dump it except for devices with
IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour
of is_tnl_info_zero(), which treats the wildcard remote address as not
configured.
## ynl example.
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do newlink --create \
--json '{"ifname": "geneve0",
"linkinfo": {"kind":"geneve",
"data": {"local": "0.0.0.0",
"collect-metadata": true}}}'
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do getlink \
--json '{"ifname": "geneve0"}' --output-json | \
jq .linkinfo.data.local
"0.0.0.0"
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When collect metadata mode (IFLA_GENEVE_COLLECT_METADATA) is
enabled, the GENEVE device creates both IPv4 and IPv6 sockets
and bind()s them to wildcard addresses.
The next patch allows creating only one socket bound to a
specific address even when the collect metadata mode is
enabled.
Then, we need a flag to distinguish dualstack GENEVE devices
to detect local address conflict.
Let's add the dualstack flag to struct geneve_config.
IFLA_GENEVE_COLLECT_METADATA processing is moved up in
geneve_nl2info() for the next patch to overwrite dualstack
to false while keeping collect_md true.
Note that IFLA_GENEVE_REMOTE and IFLA_GENEVE_REMOTE6 does not
set cfg->dualstack to false since is_tnl_info_zero() ignores
the wildcard remote address:
# ip link add geneve0 type geneve external remote 0.0.0.1
Error: Device is externally controlled, so attributes (VNI, Port, and so on) must not be specified.
# ip link add geneve0 type geneve external remote 0.0.0.0
# ss -ua | grep geneve
UNCONN 0 0 0.0.0.0:geneve 0.0.0.0:*
UNCONN 0 0 *:geneve *:*
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch to make a subsequent patch clean.
We will need to access geneve_dev->cfg.info.key.u.{ipv4,ipv6}.src
in geneve_find_sock() later and extend conditions there.
Let's pass down struct geneve from geneve_sock_add() to
geneve_find_sock() and flatten the conditional logic.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a prep patch to make a subsequent patch clean.
We will need to access geneve_dev->cfg.info.key.u.{ipv4,ipv6}.src
in geneve_create_sock() later.
Let's pass down struct geneve_dev from geneve_sock_add() to
geneve_create_sock() instead of individual config fields.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260602190436.139591-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
geneve_nl2info() calls ipv6_addr_type() to check if the remote
IPv6 address is link-local.
Then, it also calls ipv6_addr_is_multicast() for the same address.
Let's not call ipv6_addr_is_multicast() and reuse ipv6_addr_type().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260602190436.139591-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sfp->i2c_block_size is only assigned in sfp_sm_mod_probe(), which runs
from the state machine timer after SFP_F_PRESENT has been set. Between
those two points, sfp_module_eeprom() (the ethtool -m callback) gates
only on SFP_F_PRESENT and can be entered with i2c_block_size still at
its kzalloc'd value of 0.
On a pure-I2C adapter, sfp_i2c_read() then issues an i2c_transfer()
with msgs[1].len = 0 inside a loop that subtracts this_len from len
each iteration; on adapters that succeed a zero-length read the loop
never advances, spinning while holding rtnl_lock.
This was previously addressed by initializing i2c_block_size in
sfp_alloc() (commit 813c2dd786), but the initialization was dropped
when i2c_block_size was split from i2c_max_block_size.
Initialize sfp->i2c_block_size from sfp->i2c_max_block_size in
sfp_i2c_configure(), so the field is valid as soon as the adapter is
known. sfp_sm_mod_probe() still reassigns it on each module insertion
to recover from a per-module clamp to 1 (sfp_id_needs_byte_io).
Fixes: 7662abf4db ("net: phy: sfp: Add support for SMBus module access")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://patch.msgid.link/20260528205242.971410-2-jelonek.jonas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees.
Closes: https://lore.kernel.org/all/20260503200927.73EA1C2BCB4@smtp.kernel.org/
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
Link: https://patch.msgid.link/20260530042630.80626-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a subtle error with the memcpy here, where b44_gstrings should
not be dereferenced. Dereferening causes the following error with W=1:
In file included from drivers/net/ethernet/broadcom/b44.c:17:
In file included from ./include/linux/module.h:18:
In file included from ./include/linux/kmod.h:9:
In file included from ./include/linux/umh.h:4:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/powerpc/include/asm/preempt.h:5:
In file included from ./include/asm-generic/preempt.h:5:
In file included from ./include/linux/thread_info.h:23:
In file included from ./arch/powerpc/include/asm/current.h:13:
In file included from ./arch/powerpc/include/asm/paca.h:16:
In file included from ./include/linux/string.h:386:
./include/linux/fortify-string.h:578:4: error: call to
'__read_overflow2_field' declared with 'warning' attribute: detected read
beyond size of field (2nd parameter); maybe use>
578 | __read_overflow2_field(q_size_field, size);
| ^
Instead of fixing the memcpy, use ethtool_puts, which is the proper
helper for printing ethtool gstrings.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260531000334.388351-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: Add switchdev mode support for Socket Direct single netdev, part 1/2
This series enables Socket Direct single netdev to operate in switchdev
mode with shared FDB. SD single netdev combines multiple PCI functions
behind a single netdev interface. To support switchdev offloads, these
functions must participate in virtual LAG (shared FDB).
Design
Rather than introducing a separate LAG instance for SD, this series
integrates SD secondary devices into the existing LAG structure
(priv.lag) created at probe time. Each lag_func entry carries a
group_id field that identifies its SD group membership (0 means not
part of any SD group). An xarray mark (XA_MARK_PORT) distinguishes
physical port entries from SD secondaries, enabling a single unified
iterator that filters by group:
- MLX5_LAG_FILTER_PORTS: iterate port-level entries only (existing
behavior, used by bonding, FW LAG commands, v2p_map)
- MLX5_LAG_FILTER_ALL: iterate all devices including SD secondaries
(used by MPESW shared FDB across all devices)
- specific group_id: iterate only devices in that SD group (used by
per-group SD shared FDB operations)
Existing callers use mlx5_ldev_for_each() which maps to
MLX5_LAG_FILTER_PORTS, preserving current behavior for non-SD
configurations.
Lifecycle and ownership
The SD LAG lifecycle is tied to the SD group, not to bonding events:
1. At PCI probe, mlx5_lag_add_mdev() creates the LAG structure
(priv.lag) for each LAG-capable PF. e.g.: SD primary devices
2. During mlx5_sd_init(), after the SD group is fully formed (primary
and secondaries paired), sd_lag_init() registers the secondary
devices into the primary's existing priv.lag by calling
mlx5_ldev_add_mdev() with the SD group_id. The primary's lag_func
also gets its group_id set. No separate LAG instance is created.
3. After all the devices in SD group transition to switchdev,
mlx5_lag_shared_fdb_create() is invoked with the group_id to create
a software-only shared FDB scoped to that SD group. This sets
sd_fdb_active on all lag_func entries in the group. No FW LAG
commands are issued since SD devices share the same physical port.
4. If MPESW (multi-port eswitch) is enabled on top of SD groups, the
per-group SD shared FDB is torn down first, then MPESW shared FDB is
created spanning all devices (ports + SD secondaries) using
MLX5_LAG_FILTER_ALL. On MPESW disable, per-group SD shared FDB is
restored.
5. On SD teardown (mlx5_sd_cleanup or device unbind), sd_lag_cleanup()
removes secondaries from priv.lag and clears the primary's group_id.
The LAG structure itself is not destroyed.
The sd_fdb_active flag is set on all lag_func entries in a group (not
just the primary), so any device can detect the SD shared FDB state
during lag_disable_change teardown without needing to look up peer
entries.
SD shared FDB is a pure software construct -- unlike regular LAG modes
(ROCE, SRIOV, MPESW), it does not issue FW create_lag/destroy_lag
commands. The software vport LAG for SD is implemented via eswitch
egress ACL bounce rules, managed by the IB layer through
mlx5_eth_lag_init(). And the software LAG demux is implemented via
steering rules that utilize new destination, VHCA_RX.
Patches
Infrastructure (patches 1, 5-6):
- Factor out shared FDB code into a dedicated file
- Extend lag_func with group_id and sd_fdb_active fields;
add XA_MARK_PORT and unified iterator with group_id filter
- Extend shared FDB API with group_id parameter
E-Switch preparation (patches 2-3):
- Align eswitch disable sequence ordering
- Move devcom init from TC to eswitch layer
SD group management (patches 4, 7-9):
- Replace peer count check with direct peer lookup
- Register SD secondaries in the existing LAG at SD init time
- Block RoCE and VF LAG for SD devices
- Block multipath LAG for SD devices
Switchdev integration (patch 10):
- Keep netdev resources local in switchdev mode
Steering (patches 11-12):
- Track peer flow slots with bitmap for selective peer flow deletion
- Enable TC flow steering for SD LAG
Enablement (patch 13):
- Verify unique vhca_id count for cross-VHCA RQT
====================
Link: https://patch.msgid.link/20260531113954.395443-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change verify_num_vhca_ids() to count the number of unique vhca_ids
and verify this count doesn't exceed max_num_vhca_id, rather than
validating individual vhca_id values are within a specific range.
The previous implementation checked if each vhca_id was in the range
[0, max_num_vhca_id - 1], which is overly restrictive. The hardware
capability max_rqt_vhca_id represents the maximum number of unique
vhca_ids that can be used, not a range constraint on individual IDs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable TC flow steering for SD LAG mode by extending multiport
eligibility checks and peer flow handling.
SD LAG operates similarly to MPESW for TC offloads - flows on
secondary devices need peer flow creation on the primary, and
multiport forwarding rules are eligible when either MPESW or SD LAG
is active.
Add mlx5_lag_is_sd() helper to query SD LAG mode, and
mlx5_sd_is_primary() to identify the primary device. Redirect uplink
priv/proto_dev queries to the primary device's eswitch in SD
configurations.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With SD devices joining the LAG, peer flows are not created for all
devcom peers - SD devices skip peers that belong to a different SD
group. However, the delete path iterated all devcom peers
unconditionally, attempting to delete from slots that were never
populated.
Track which peer slots are populated using a bitmap in mlx5e_tc_flow.
The delete path now iterates only set bits, matching exactly the slots
that were set up during flow creation.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In SD switchdev mode, network device resources such as channels and
completion vectors must remain on the same PF rather than being
distributed across SD group members.
Modify mlx5_sd_ch_ix_get_dev_ix() to return 0 and
mlx5_sd_ch_ix_get_vec_ix() to return the channel index directly when
in switchdev mode, keeping resources local to the requesting PF.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SD devices are not compatible with multipath LAG since they use
dedicated SD LAG for cross-socket connectivity. Add an SD check
to the multipath prereq validation to prevent multipath LAG
activation on SD-configured ports.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket Direct devices manage their own LAG via SD LAG infrastructure.
Block the standard netdev-event-driven LAG path (RoCE LAG and VF LAG)
for SD devices to prevent conflicting LAG configurations.
Expose mlx5_sd_is_supported() as a public helper that encapsulates all
SD eligibility checks. Use it in mlx5_lag_dev_alloc() to skip netdev
notifier registration for SD-capable devices at alloc time. Some sd
code is reordered to expose the new function, no logic is changed.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Register SD secondary devices with the existing LAG structure by
adding them to the primary's ldev xarray with a shared group_id.
This ties the SD LAG lifecycle to the SD group lifecycle.
Add sd_lag_state debugfs entry for LAG state visibility. To avoid
race between this entry and LAG deletion, have debugfs creation
and deletion done last on SD init and first on SD cleanup.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a group_id parameter to mlx5_lag_shared_fdb_create() and
mlx5_lag_shared_fdb_destroy() to scope shared FDB operations to a
specific SD group.
When group_id is U32_MAX, the functions operate on all LAG devices. When
group_id is non-zero, they operate only on devices in that SD group
without issuing FW LAG commands, since SD LAG is a pure software
construct.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket Direct (SD) secondaries devices will participate in LAG, even
though they are silent. SD secondary devices share the same physical
port as their primary but are separate PCI functions that need to be
tracked alongside regular LAG ports.
Extend lag_func with a group_id field to identify SD group membership
and introduce a unified iterator that can filter by group. Add APIs
for registering SD secondary devices in an existing LAG.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace mlx5_eswitch_get_npeers() count-based check with a new
mlx5_eswitch_is_peer() function that directly verifies the peer
relationship between two eswitches.
This change prepares for SD LAG support, which is a virtual LAG that
does not have num_lag_ports capability and cannot use the count-based
peer validation.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260531113954.395443-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
