Dirty page tracking relies on the IOMMU atomically updating the dirty bit
in the paging-structure entry. For this operation to succeed, the paging-
structure memory must be coherent between the IOMMU and the CPU. In
another word, if the iommu page walk is incoherent, dirty page tracking
doesn't work.
The Intel VT-d specification, Section 3.10 "Snoop Behavior" states:
"Remapping hardware encountering the need to atomically update A/EA/D bits
in a paging-structure entry that is not snooped will result in a non-
recoverable fault."
To prevent an IOMMU from being incorrectly configured for dirty page
tracking when it is operating in an incoherent mode, mark SSADS as
supported only when both ecap_slads and ecap_smpwc are supported.
Fixes: f35f22cc76 ("iommu/vt-d: Access/Dirty bit support for SS domains")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250924083447.123224-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.
Fixes: 7272194ed3 ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When the driver is removed, the clocks are first enabled by
calling pm_runtime_get_sync(), and then disabled with
pm_runtime_put_sync().
If CONFIG_PM=y, clocks for this controller are disabled when it's in
the idle state. So the clocks are properly disabled when the driver
exits.
Othewise, the clocks are always enabled and the PM functions have
no effect. Therefore, the driver exits without disabling the clocks.
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
18
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/bind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/unbind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
To ensure that the clocks can be disabled correctly even without
CONFIG_PM=y, should add the following fixes:
- Replace with pm_runtime_put_noidle(), which only decrements the runtime
PM usage count.
- Call i2c_dw_prepare_clk(false) to explicitly disable the clocks.
Fixes: 7272194ed3 ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data.
Fixes: be6e8dc0ba ("NFS support for btrfs - v3")
CC: stable@vger.kernel.org # 3.0+
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The USB abstractions target to support USB interface drivers.
While internally the abstraction has to deal with the interface's parent
USB device, there shouldn't be a need for users to deal with the parent
USB device directly.
Functions, such as for preparing and sending USB URBs, can be
implemented for the usb::Interface structure directly. Whether this
internal implementation has to deal with the parent USB device can
remain transparent to USB interface drivers.
Hence, keep the usb::Device structure private for now, in order to avoid
confusion for users and to make it less likely to accidentally expose
APIs with unnecessary indirections.
Should we start supporting USB device drivers, or need it for any other
reason we do not foresee yet, it should be trivial to make it public
again.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250925190400.144699-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When deriving the parent USB device (struct usb_device) from a USB
interface (struct usb_interface), do not retain the device context.
For the Bound context, as pointed out by Alan in [1], it is not
guaranteed that the parent USB device is always bound when the interface
is bound.
The bigger problem, however, is that we can't infer the Core context,
since eventually it indicates that the device lock is held. However,
there is no guarantee that if the device lock of the interface is held,
also the device lock of the parent USB device is held.
Hence, fix this by not inferring any device context information; while
at it, fix up the (affected) safety comments.
Link: https://lore.kernel.org/all/0ff2a825-1115-426a-a6f9-df544cd0c5fc@rowland.harvard.edu/ [1]
Fixes: e7e2296b0e ("rust: usb: add basic USB abstractions")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250925190400.144699-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using intel_psr_exit in frontbuffer flush on older platforms seems to be
causing problems.
Sending single full frame update using intel_psr_force_update is anyways
more optimal compared to psr deactivate/activate -> move back to this
approach on PSR1, PSR HW tracking and Panel Replay full frame update and
use deactivate/activate only on LunarLake and only when selective fetch is
enabled.
Tested-by: Lemen <lemen@lemen.xyz>
Tested-by: Koos Vriezen <koos.vriezen@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14946
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250922102725.2752742-1-jouni.hogander@intel.com
OOB and overflow fixes for fbcon, and a race condition fix for panthor.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaNUoIgAKCRAnX84Zoj2+
dm6kAXwKfrCrV/IsZ5Ns7rmHWJwfG0LeMc3ag+7hgJijTjHh46NfOLUMSYxUHWEt
WsK8xB8Bf0HJrloDICxTtt4ynTXGqwXC7Po8bMIYM+ct7Z7L5wvTb8RKTpaREwGs
a33fThctDg==
=5YeQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-09-25' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A CPU stall fix for ast, a NULL pointer dereference fix for gma500, an
OOB and overflow fixes for fbcon, and a race condition fix for panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250925-smilodon-of-luxurious-genius-4ebee7@penduick
This tag contains habanalabs driver changes for v6.18.
It continues the previous upstream work from tags/drm-habanalabs-next-2024-06-23,
Including improvements in debug and visibility, alongside general code cleanups,
and new features such as vmalloc-backed coherent mmap, HLDIO infrastructure, etc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Elbaz, Koby" <koby.elbaz@intel.com>
Link: https://lore.kernel.org/r/da02d370-9967-49d2-9eef-7aeaa40c987c@intel.com
This tool was originally written when Linux had no standard
interface for EPB, or HWP support.
Retain the capability to manage a system w/o any kernel PM support,
but prefer the standard kernel interfaces, when avaialble.
(not doing so led to a confusing conflict between a p-state limit
request made via cpufreq and modified by the intel-pstate driver,
versus the raw MSR write made by this utility)
Signed-off-by: Len Brown <len.brown@intel.com>
$ make snapshot
creates x86_energy_perf_policy-$(DATE).tar.gz
Which can be transported to a target machine
without needing a kernel tree to build on the target.
Useful for creating debug versions.
Signed-off-by: Len Brown <len.brown@intel.com>
When we are successful in using cpufreq min/max limits,
skip setting the raw MSR limits entirely.
This is necessary to avoid undoing any modification that
the cpufreq driver makes to our sysfs request.
eg. intel_pstate may take our request for a limit
that is valid according to HWP.CAP.MIN/MAX and clip
it to be within the range available in PLATFORM_INFO.
Signed-off-by: Len Brown <len.brown@intel.com>
Comprehend that EPB writes are now only via sysfs
by moving it out of the _msr specific path.
No functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE.
Also, skip writing the MSR_PM_ENABLE if HWP is already enabled.
Signed-off-by: Len Brown <len.brown@intel.com>
The fopen_or_die() function was previously hardcoded
to open files in read-only mode ("r"), ignoring the
mode parameter passed to it. This patch corrects
fopen_or_die() to use the provided mode argument,
allowing for flexible file access as intended.
Additionally, the call to fopen_or_die() in
err_on_hypervisor() incorrectly used the mode
"ro", which is not a valid fopen mode. This is
fixed to use the correct "r" mode.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The pmt_telemdir_sort() comparison function was returning a boolean
value (0 or 1) instead of the required negative, zero, or positive
value for proper sorting. This caused unpredictable and incorrect
ordering of telemetry directories named telem0, telem1, ..., telemN.
Update the comparison logic to return -1, 0, or 1 based on the
numerical value extracted from the directory name, ensuring correct
numerical ordering when using scandir.
This change improves stability and correctness when iterating PMT
telemetry directories.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
For example, in the following case:
$ xfs_io -c fsmap -d
0: 254:16 [0..7]: static fs metadata 8
1: 254:16 [8..15]: special 102:1 8
2: 254:16 [16..5127]: special 102:2 5112
3: 254:16 [5128..5255]: special 102:3 128
4: 254:16 [5256..5383]: special 102:4 128
5: 254:16 [5384..70919]: inodes 65536
6: 254:16 [70920..70967]: unknown 48
...
$ xfs_io -c fsmap -d 24 33
0: 254:16 [24..39]: unknown 16 <--- incomplete reporting
$ xfs_io -c fsmap -d 24 33 (With patch)
0: 254:16 [16..5127]: special 102:2 5112
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
$ xfs_io -c fsmap -d
...
6: 254:16 [104..127]: free space 24
7: 254:16 [128..191]: inodes 64
...
$ xfs_io -c fsmap -d 137 150
0: 254:16 [128..191]: inodes 64 <-- full extent returned
[1] https://man7.org/linux/man-pages/man2/ioctl_getfsmap.2.html
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <023f37e35ee280cd9baac0296cbadcbe10995cab.1757058211.git.ojaswin@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The BGRT table is used to display a vendor logo in the boot process.
There is no good reason why RISC-V should not support it.
Remove the architecture constraint.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20250729131535.522205-3-heinrich.schuchardt@canonical.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The GPIO keyboard and event device can be used to receive graceful
shutdown or reboot input keys so let us enable it by default for
RV64 (just like ARM64).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-24-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add ACPI support for the RISC-V RPMI system MSI based irqchip driver.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-23-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add ACPI support for the RISC-V SBI message proxy (MPXY) based
mailbox driver.
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-22-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
ACPI based loadable drivers which need MSIs will also need
imsic_acpi_get_fwnode() to update the device MSI domain so
export this function.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-21-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The RPMI System MSI device will provide GSIs to downstream devices
(such as GED) so add it to the RISC-V GSI to fwnode mapping.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-20-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Some RISC-V interrupt controllers like RPMI based system MSI interrupt
controllers do not have MADT entry defined. These interrupt controllers
exist only in the namespace. ACPI spec defines _GSB method to get the
GSI base of the interrupt controller, However, there is no such standard
method to get the GSI range. To support such interrupt controllers, set
the GSI range of such interrupt controllers to non-overlapping range and
provide API for interrupt controller driver to update it with proper
value.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-19-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently, the interrupt controller list is created without any order.
Create the list sorted with the GSI base of the interrupt controllers.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-18-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The RPMI System MSI interrupt controller (just like PLIC and APLIC)
needs to probed prior to devices like GED which use interrupts provided
by it. Also, it has dependency on the SBI MPXY mailbox device.
Add HIDs of RPMI System MSI and SBI MPXY mailbox devices to the honor
list so that those dependencies are handled.
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-17-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently, ACPI does not support the use of a nargs_prop (e.g.,
associated with a reference in fwnode_property_get_reference_args().
Instead, ACPI expects the number of arguments (nargs) to be explicitly
passed or known.
This behavior diverges from Open Firmware (OF), which allows the use of
a #*-cells property in the referenced node to determine the number of
arguments. Since fwnode_property_get_reference_args() is a common
interface used across both OF and ACPI firmware paradigms, it is
desirable to have a unified calling convention that works seamlessly for
both.
Add the support for ACPI to parse a nargs_prop from the referenced
fwnode, aligning its behavior with the OF backend. This allows drivers
and subsystems using fwnode_property_get_reference_args() to work in a
firmware-agnostic way without having to hardcode or special-case
argument counts for ACPI.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-16-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Allow interrupt for ti,tmp75 because chip has open drain ALERT signal.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250925192219.303825-1-Frank.Li@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250925085929.2581749-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All firmware for the Lemans platform aka QCS9100 aka QCS9075 is for
historical reasons located in the qcom/sa8775p/ subdir inside
linux-firmware. The only exceptions to this rule are audio topology
files. While it's not too late, change the subdir to point to the
sa8775p/ subdir, so that all firmware for that platform is present at
the same location.
Fixes: 5b5bf5922f ("ASoC: qcom: sc8280xp: Add sound card support for QCS9100 and QCS9075")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250924-lemans-evk-topo-v2-1-7d44909a5758@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Renesas MSIOF driver might get some errors. This patch-set try to
reduce/remove them.
The mclk direction now needs to be specified in endpoint node with
"system-clock-direction-out" property. However some calls to the
set_sysclk callback, related to CPU DAI clock, result in unbalanced
calls to clock API.
The set_sysclk callback in STM32 SAI driver is intended only for mclk
management. So it is relevant to ensure that calls to set_sysclk are
related to mclk only.
Since the master clock is handled only at runtime, skip the calls to
set_sysclk in the initialization phase.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250916123118.84175-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tests for stacktrace map lookup and delete:
1. use bpf_map_lookup_and_delete_elem to lookup and delete the target
stack_id,
2. lookup the deleted stack_id again to double check.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-3-chen.dylane@linux.dev
The loading method of the stacktrace_map test case looks too outdated,
refactor it with skeleton, and we can use global variable feature in
the next patch.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-2-chen.dylane@linux.dev
The stacktrace map can be easily full, which will lead to failure in
obtaining the stack. In addition to increasing the size of the map,
another solution is to delete the stack_id after looking it up from
the user, so extend the existing bpf_map_lookup_and_delete_elem()
functionality to stacktrace map types.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-1-chen.dylane@linux.dev
commit c519c3c0a1 ("mm/kasan: avoid lazy MMU mode hazards") introduced
the use of arch_enter_lazy_mmu_mode(), which results in the compiler
complaining about "statement has no effect", when
__HAVE_ARCH_LAZY_MMU_MODE is not defined in include/linux/pgtable.h
The exact warning/error is:
In file included from ./include/linux/kasan.h:37,
from mm/kasan/shadow.c:14:
mm/kasan/shadow.c: In function kasan_populate_vmalloc_pte:
./include/linux/pgtable.h:247:41: error: statement with no effect [-Werror=unused-value]
247 | #define arch_enter_lazy_mmu_mode() (LAZY_MMU_DEFAULT)
| ^
mm/kasan/shadow.c:322:9: note: in expansion of macro arch_enter_lazy_mmu_mode> 322 | arch_enter_lazy_mmu_mode();
| ^~~~~~~~~~~~~~~~~~~~~~~~
switching these "functions" to static inlines fixes this up.
Fixes: c519c3c0a1 ("mm/kasan: avoid lazy MMU mode hazards")
Reported-by: Balbir Singh <balbirs@nvidia.com>
Closes: https://lkml.kernel.org/r/20250912235515.367061-1-balbirs@nvidia.com
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The callback return value is ignored in damon_sysfs_damon_call(), which
means that it is not possible to detect invalid user input when writing
commands such as 'commit' to
/sys/kernel/mm/damon/admin/kdamonds/<K>/state. Fix it.
Link: https://lkml.kernel.org/r/20250920132546.5822-1-akinobu.mita@gmail.com
Fixes: f64539dcdb ("mm/damon/sysfs: use damon_call() for update_schemes_stats")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I will be leaving Prolan this week. You can reach me by my personal email
for now.
Link: https://lkml.kernel.org/r/20250915-mailmap-v1-1-9ebdea93c6a7@prolan.hu
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches
pagemap_scan_backout_range(), kernel panics with null-ptr-deref:
[ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 #22 PREEMPT(none)
[ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80
<snip registers, unreliable trace>
[ 44.946828] Call Trace:
[ 44.947030] <TASK>
[ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0
[ 44.952593] walk_pmd_range.isra.0+0x302/0x910
[ 44.954069] walk_pud_range.isra.0+0x419/0x790
[ 44.954427] walk_p4d_range+0x41e/0x620
[ 44.954743] walk_pgd_range+0x31e/0x630
[ 44.955057] __walk_page_range+0x160/0x670
[ 44.956883] walk_page_range_mm+0x408/0x980
[ 44.958677] walk_page_range+0x66/0x90
[ 44.958984] do_pagemap_scan+0x28d/0x9c0
[ 44.961833] do_pagemap_cmd+0x59/0x80
[ 44.962484] __x64_sys_ioctl+0x18d/0x210
[ 44.962804] do_syscall_64+0x5b/0x290
[ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e
vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are
allocated and p->vec_buf remains set to NULL.
This breaks an assumption made later in pagemap_scan_backout_range(), that
page_region is always allocated for p->vec_buf_index.
Fix it by explicitly checking p->vec_buf for NULL before dereferencing.
Other sites that might run into same deref-issue are already (directly or
transitively) protected by checking p->vec_buf.
Note:
From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output
is requested and it's only the side effects caller is interested in,
hence it passes check in pagemap_scan_get_args().
This issue was found by syzkaller.
Link: https://lkml.kernel.org/r/20250922082206.6889-1-acsjakub@amazon.de
Fixes: 52526ca7fd ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Penglei Jiang <superman.xpt@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Running sha224_kunit on a KMSAN-enabled kernel results in a crash in
kmsan_internal_set_shadow_origin():
BUG: unable to handle page fault for address: ffffbc3840291000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1810067 P4D 1810067 PUD 192d067 PMD 3c17067 PTE 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 81 Comm: kunit_try_catch Tainted: G N 6.17.0-rc3 #10 PREEMPT(voluntary)
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmsan_internal_set_shadow_origin+0x91/0x100
[...]
Call Trace:
<TASK>
__msan_memset+0xee/0x1a0
sha224_final+0x9e/0x350
test_hash_buffer_overruns+0x46f/0x5f0
? kmsan_get_shadow_origin_ptr+0x46/0xa0
? __pfx_test_hash_buffer_overruns+0x10/0x10
kunit_try_run_case+0x198/0xa00
This occurs when memset() is called on a buffer that is not 4-byte aligned
and extends to the end of a guard page, i.e. the next page is unmapped.
The bug is that the loop at the end of kmsan_internal_set_shadow_origin()
accesses the wrong shadow memory bytes when the address is not 4-byte
aligned. Since each 4 bytes are associated with an origin, it rounds the
address and size so that it can access all the origins that contain the
buffer. However, when it checks the corresponding shadow bytes for a
particular origin, it incorrectly uses the original unrounded shadow
address. This results in reads from shadow memory beyond the end of the
buffer's shadow memory, which crashes when that memory is not mapped.
To fix this, correctly align the shadow address before accessing the 4
shadow bytes corresponding to each origin.
Link: https://lkml.kernel.org/r/20250911195858.394235-1-ebiggers@kernel.org
Fixes: 2ef3cec44c ("kmsan: do not wipe out origin when doing partial unpoisoning")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Migration may be raced with fallocating hole. remove_inode_single_folio
will unmap the folio if the folio is still mapped. However, it's called
without folio lock. If the folio is migrated and the mapped pte has been
converted to migration entry, folio_mapped() returns false, and won't
unmap it. Due to extra refcount held by remove_inode_single_folio,
migration fails, restores migration entry to normal pte, and the folio is
mapped again. As a result, we triggered BUG in filemap_unaccount_folio.
The log is as follows:
BUG: Bad page cache in process hugetlb pfn:156c00
page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00
head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0
aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file"
flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: f4(hugetlb)
page dumped because: still mapped when deleted
CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x70
filemap_unaccount_folio+0xc4/0x1c0
__filemap_remove_folio+0x38/0x1c0
filemap_remove_folio+0x41/0xd0
remove_inode_hugepages+0x142/0x250
hugetlbfs_fallocate+0x471/0x5a0
vfs_fallocate+0x149/0x380
Hold folio lock before checking if the folio is mapped to avold race with
migration.
Link: https://lkml.kernel.org/r/20250912074139.3575005-1-tujinjiang@huawei.com
Fixes: 4aae8d1c05 ("mm/hugetlbfs: unmap pages if page fault raced with hole punch")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The rcar_msi_irq_unmask() function may be called from a PCI driver
request_threaded_irq() function. This triggers kernel/irq/manage.c
__setup_irq() which locks raw spinlock &desc->lock descriptor lock
and with that descriptor lock held, calls rcar_msi_irq_unmask().
Since the &desc->lock descriptor lock is a raw spinlock, and the rcar_msi
.mask_lock is not a raw spinlock, this setup triggers 'BUG: Invalid wait
context' with CONFIG_PROVE_RAW_LOCK_NESTING=y.
Use scoped_guard() to simplify the locking.
Fixes: 83ed8d4fa6 ("PCI: rcar: Convert to MSI domains")
Reported-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250909162707.13927-2-marek.vasut+renesas@mailbox.org