Drop the XOR implementation generated by the vectorizer: this has always
been a bit of a hack, and now that arm64 has an intrinsics version that
works on ARM too, let's use that instead.
So copy the part of the arm64 code that can be shared (so not the EOR3
version). The arm64 code will be updated in a subsequent patch to share
this implementation.
Performance (QEMU mach-virt VM running on Synquacer [Cortex-A53 @ 1 GHz]
Before:
[ 3.519687] xor: measuring software checksum speed
[ 3.521725] neon : 1660 MB/sec
[ 3.524733] 32regs : 1105 MB/sec
[ 3.527751] 8regs : 1098 MB/sec
[ 3.529911] arm4regs : 1540 MB/sec
After:
[ 3.517654] xor: measuring software checksum speed
[ 3.519454] neon : 1896 MB/sec
[ 3.522499] 32regs : 1090 MB/sec
[ 3.525560] 8regs : 1083 MB/sec
[ 3.527700] arm4regs : 1556 MB/sec
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260422171655.3437334-12-ardb+git@google.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a header asm/neon-intrinsics.h similar to the one that arm64 has.
This makes it possible for NEON intrinsics code to be shared seamlessly
between ARM and arm64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260422171655.3437334-11-ardb+git@google.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth: vti: use ip6_tnl.net in vti6_changelink().
- eth: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=IBwj
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
The hypervisor is an untrusted entity for TDX guests. It cannot be used
to boot secondary CPUs. The function hv_vtl_wakeup_secondary_cpu() cannot
be used.
Instead, the virtual firmware boots the secondary CPUs and places them in
a state to transfer control to the kernel using the wakeup mailbox. The
firmware enumerates the mailbox via either an ACPI table or a DeviceTree
node.
If the wakeup mailbox is present, the kernel updates the APIC callback
wakeup_secondary_cpu_64() to use it.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
The current code maps MMIO devices as shared (decrypted) by default in a
confidential computing VM.
In a TDX environment, secondary CPUs are booted using the Multiprocessor
Wakeup Structure defined in the ACPI specification. The virtual firmware
and the operating system function in the guest context, without
intervention from the VMM. Map the physical memory of the mailbox as
private. Use the is_private_mmio() callback.
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
A Hyper-V VTL level 2 guest in a TDX environment needs to map the physical
page of the ACPI Multiprocessor Wakeup Structure as private (encrypted). It
needs to know the physical address of this structure. Add a helper function
to retrieve the address.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
The hypervisor is an untrusted entity for TDX guests. It cannot be used
to boot secondary CPUs - neither via hypercalls nor the INIT assert,
de-assert, plus Start-Up IPI messages.
Instead, the platform virtual firmware boots the secondary CPUs and
puts them in a state to transfer control to the kernel. This mechanism uses
the wakeup mailbox described in the Multiprocessor Wakeup Structure of the
ACPI specification. The entry point to the kernel is trampoline_start64.
Allocate and setup the trampoline using the default x86_platform callbacks.
The platform firmware configures the secondary CPUs in long mode. It is no
longer necessary to locate the trampoline under 1MB memory. After handoff
from firmware, the trampoline code switches briefly to 32-bit addressing
mode, which has an addressing limit of 4GB. Set the upper bound of the
trampoline memory accordingly.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
x86 CPUs boot in real mode. This mode uses a 1MB address space. The
trampoline must reside below this 1MB memory boundary.
There are platforms in which the firmware boots the secondary CPUs,
switches them to long mode and transfers control to the kernel. An example
of such a mechanism is the ACPI Multiprocessor Wakeup Structure.
In this scenario there is no restriction on locating the trampoline under
1MB memory. Moreover, certain platforms (for example, Hyper-V VTL guests)
may not have memory available for allocation below 1MB.
Add a new member to struct x86_init_resources to specify the upper bound
for the location of the trampoline memory. Preserve the default upper bound
of 1MB to conserve the current behavior.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
Hyper-V VTL clears x86_platform.realmode_{init(), reserve()} in
hv_vtl_init_platform() whereas it sets real_mode_header later in
hv_vtl_early_init(). There is no need to deal with the settings of real
mode memory in two places. Also, both functions are called much earlier
than x86_platform.realmode_init() (via an early_initcall), where the
real_mode_header is needed.
Set real_mode_header in hv_vtl_init_platform() to keep all code dealing
with memory for the real mode trampoline in one place. Besides making the
code more readable, it prepares it for a subsequent changeset in which the
behavior needs to change to support Hyper-V VTL guests in a TDX
environment.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
The Wakeup Mailbox is a mechanism to boot secondary CPUs on systems that do
not want or cannot use the INIT + StartUp IPI messages.
The platform firmware is expected to implement the mailbox as described in
the Multiprocessor Wakeup Structure of the ACPI specification. It is also
expected to publish the mailbox to the operating system as described in the
corresponding DeviceTree schema that accompanies the documentation of the
Linux kernel.
Reuse the existing functionality to set the memory location of the mailbox
and update the wakeup_secondary_cpu_64() APIC callback. Make this
functionality available to DeviceTree-based systems by making CONFIG_X86_
MAILBOX_WAKEUP depend on either CONFIG_OF or CONFIG_ACPI_MADT_WAKEUP.
do_boot_cpu() uses wakeup_secondary_cpu_64() when set. It will be set if a
wakeup mailbox is enumerated via an ACPI table or a DeviceTree node. For
cases in which this behavior is not desired, this APIC callback can be
updated later during boot using platform-specific hooks.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Co-developed-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
Add DeviceTree bindings to enumerate the wakeup mailbox used in platform
firmware for Intel processors.
x86 platforms commonly boot secondary CPUs using an INIT assert, de-assert
followed by Start-Up IPI messages. The wakeup mailbox can be used when this
mechanism is unavailable.
The wakeup mailbox offers more control to the operating system to boot
secondary CPUs than a spin-table. It allows the reuse of the same wakeup
vector for all CPUs while maintaining control over which CPUs to boot and
when. While it is possible to achieve the same level of control using a
spin-table, it would require specifying a separate `cpu-release-addr` for
each secondary CPU.
The operation and structure of the mailbox are described in the
Multiprocessor Wakeup Structure defined in the ACPI specification. Note
that this structure does not specify how to publish the mailbox to the
operating system (ACPI-based platform firmware uses a separate table). No
ACPI table is needed in DeviceTree-based firmware to enumerate the mailbox.
Nodes that want to refer to the reserved memory usually define
a `memory-region` property. /cpus/cpu* nodes would want to refer to the
mailbox, but they do not have such property defined in the DeviceTree
specification. Moreover, it would imply that there is a memory region per
CPU. Instead, add a `compatible` property that the operating system can use
to discover the mailbox.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael.j.wysocki@intel.com>
Co-developed-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
Systems that describe hardware using DeviceTree graphs may enumerate and
implement the wakeup mailbox as defined in the ACPI specification but do
not otherwise depend on ACPI. Expose functions to setup and access the
location of the wakeup mailbox from outside ACPI code.
The function acpi_setup_mp_wakeup_mailbox() stores the physical address of
the mailbox and updates the wakeup_secondary_cpu_64() APIC callback.
The function acpi_madt_multiproc_wakeup_mailbox() returns a pointer to the
mailbox.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
The prototypes for get_topology_cpu_type_name() and
get_topology_cpu_type() take a pointer to struct cpuinfo_x86, but
asm/topology.h neither includes nor forward-declares the structure.
Including asm/topology.h, directly or indirectly, without including
asm/processor.h triggers a warning:
./arch/x86/include/asm/topology.h:159:47: error: ‘struct cpuinfo_x86’
declared inside parameter list will not be visible outside of this
definition or declaration [-Werror]
159 | const char *get_topology_cpu_type_name(struct cpuinfo_x86 *c);
| ^~~~~~~~~~~
Since only a pointer is needed, add a forward declaration of struct
cpuinfo_x86.
Additionally, sysctl_sched_itmt_enabled is declared in asm/topology.h with
the __read_mostly attribute, but the header does not include linux/cache.h.
This causes a build failure when including asm/topology.h but not linux/
cache.h:
./arch/x86/include/asm/topology.h:264:27: error: expected ‘=’, ‘,’,
‘;’, ‘asm’ or ‘__attribute__’ before ‘sysctl_sched_itmt_enabled’
264 | extern bool __read_mostly sysctl_sched_itmt_enabled;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Include the required header.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511181954.UMxCeTV1-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511190008.AA0NTn3G-lkp@intel.com/
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
Backmerge to pull in commit 838d852da8 ("rust: allow
`clippy::collapsible_match` globally"), in order to get rid of spurious
warnings messing with developer tooling.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The RK3588 Video Capture (VICAP) unit features a Digital Video Port (DVP)
and six MIPI CSI-2 capture interfaces. Add initial support for this variant
to the rkcif driver and enable the MIPI CSI-2 capture interfaces.
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add documentation for the Rockchip RK3588 Video Capture (VICAP) unit. To
that end, make the existing rockchip,rk3568-vicap documentation more
general and introduce variant specific constraints.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add a section that describes the Rockchip RK3588 VICAP.
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rsu_send_msg() can return -ETIMEDOUT when
wait_for_completion_interruptible_timeout() fires while the SMC call is still
pending. In stratix10_rsu_probe(), the error paths for COMMAND_RSU_DCMF_VERSION,
COMMAND_RSU_DCMF_STATUS, COMMAND_RSU_MAX_RETRY and COMMAND_RSU_GET_SPT_TABLE
call stratix10_svc_free_channel() - which sets chan->scl to NULL - but then
fall through and queue the next request on the same channel. The next svc
kthread that runs will dereference pdata->chan->scl in its receive callback
path, triggering a NULL pointer dereference identical to the one fixed by
commit c45f726310 ("firmware: stratix10-rsu: Fix NULL pointer dereference
when RSU is disabled") for the COMMAND_RSU_STATUS path.
Apply the same cleanup pattern to the remaining failure paths: remove the
async client, free the channel, and return early so no further messages are
queued on a channel whose scl has been cleared.
While at it, clean up stratix10_rsu_probe() in two ways without changing
behavior:
- Drop redundant zero-initialization of fields already cleared by
devm_kzalloc(): client.receive_cb, status.* and spt0/1_address
(INVALID_SPT_ADDRESS is 0x0).
- Replace five identical 3-line error-cleanup blocks
(stratix10_svc_remove_async_client() + stratix10_svc_free_channel() +
return ret) with goto labels (remove_async_client, free_channel),
matching the standard kernel resource-unwinding pattern and making it
easier to extend the probe sequence without forgetting matching
cleanup.
Also move init_completion() next to mutex_init() so sync-primitive
initialization is grouped before anything that could trigger a
callback.
Fixes: 15847537b6 ("firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.")
Cc: stable@kernel.org
Assisted-by: Claude:claude-4.7-opus-high Cursor
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: Add a minor clean-up of the function stratix10_rsu_probe() to have a
centralize exit for all the rsu_send_async_msg() and rsu_send_msg().
When the ATF version is too old to support SIP SVC v3 asynchronous
operations (e.g. ATF 2.5), stratix10_svc_async_init() returns
-EOPNOTSUPP. The probe function currently treats any non-zero return
as fatal and aborts, logging:
stratix10-svc firmware:svc: Intel Service Layer Driver: ATF version \
is not compatible for async operation
stratix10-svc firmware:svc: probe with driver stratix10-svc failed \
with error -95
This prevents the SVC driver from loading entirely, causing all
dependent client drivers (hwmon, RSU, FCS) to also fail to probe even
though they can operate correctly via the synchronous V1 SMC path.
Fix this by treating -EOPNOTSUPP from stratix10_svc_async_init() as a
non-fatal degraded condition. The driver loads in sync-only mode and
logs:
stratix10-svc firmware:svc: Intel Service Layer Driver Initialized \
(sync-only mode)
Fixes: bcb9f4f070 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add a 'supported' flag to struct stratix10_async_ctrl to indicate
whether the secure firmware supports SIP SVC v3 asynchronous
communication. When the ATF version check in stratix10_svc_async_init()
fails, set supported=false and return -EOPNOTSUPP instead of -EINVAL.
This allows callers to distinguish between "async not supported by this
ATF version" (-EOPNOTSUPP) and "programming error / bad argument"
(-EINVAL), and take appropriate action (e.g. fall back to synchronous
V1 SMC path) rather than treating both as fatal.
Also update stratix10_svc_add_async_client() to return -EOPNOTSUPP
immediately when async is not supported, rather than -EINVAL from the
!actrl->initialized check, so client drivers receive a consistent and
meaningful error code.
This patch is a prerequisite for the following fix and must be applied
together with it to correctly restore functionality on old ATF versions.
Fixes: bcb9f4f070 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Suggested-by: Anders Hedlund <anders.hedlund@windriver.com>
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The media_entity_remote_source_pad_unique() function returns an error
pointer on failure, not NULL. Fix the check to use IS_ERR() and return
PTR_ERR() to correctly handle allocation failures.
Fixes: 982135c0ea ("media: ti: j721e-csi2rx: add a subdev for the core device")
Fixes: 3ed9c0a1fd ("media: ti: j721e-csi2rx: add multistream support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Replace open-coded `i--; for (; i >= 0; i--)` patterns with the
idiomatic `while (i--)` in the error unwind paths of
csi_async_notifier_complete() and ti_csi2rx_probe().
Also scope loop variables directly in the for statement instead of
declaring them at the top of the function in ti_csi2rx_suspend(),
ti_csi2rx_resume() and ti_csi2rx_remove(). Change the type to
unsigned int in the first two to match csi->num_ctx.
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
CVS is located between IPU device and sensors and is available in
existing commercial platforms from multiple OEMs. The connection
information between them in firmware is not enough to build a V4L2
connection graph. This patch parses the connection properties from the
SSDB buffer in DSDT and builds the connection using software nodes.
From the IPU bridge point of view, CVS is just like IVSC.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 13 9350 + IPU7
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add driver for Intel Computer Vision Sensing (CVS) devices found on
Intel Luna Lake (LNL), Panther Lake (PTL), and Arrow Lake (ARL)
platforms.
The CVS device acts as a V4L2 sub-device bridge that manages CSI-2
link ownership between the host (Linux) and firmware for camera
sensors. It provides:
- Query the device status via sysfs interface
- CSI-2 link ownership arbitration between host and CVS firmware
- MIPI CSI-2 configuration management
- Privacy LED control coordination
- Power management integration with runtime PM
The driver consists of two main components:
core.c: Core driver with probe, command transport, and power management
v4l2.c: V4L2 sub-device and media framework integration
Hardware Interface:
- I2C for command/control communication with device firmware
- GPIO signals for ownership handshaking (request/response)
- Optional reset and wake interrupt for full-capability variants
- Integration with Intel IPU via ipu_bridge
The driver supports two hardware capability levels:
- Light capability: Basic GPIO-based ownership (2 GPIOs)
- Full capability: Enhanced with reset control and wake IRQ (4 GPIOs)
Device-specific quirks are handled via a quirk table to accommodate
variations across different CVS implementations (Lattice, Synaptics).
In addition to I2C-based operation, the driver supports platform
device instantiation for systems where CVS is exposed without I2C
transport, falling back to GPIO-only ownership control.
The CVS driver integrates with the IPU bridge for automatic device
discovery via ACPI on supported platforms.
PCI device IDs for Intel IPU7 (0x645d, shared by MTL and LNL) and
IPU7.5 (0xb05d, shared by ARL and PTL) are included in the
driver-local icvs_pci_tbl lookup table, enabling CVS to locate these
IPU variants without modifying the shared ipu6-pci-table header.
A PM runtime device link is established between IPU (consumer) and CVS
(supplier) so that the PM framework automatically resumes CVS before
IPU begins streaming, triggering cvs_runtime_resume() to claim CSI-2
link ownership. Ownership is released via cvs_runtime_suspend() after
the autosuspend delay.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 13 9350 + IPU7
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cezary Rojewski <cezary.rojewski@intel.com> says:
Outcome of a long debug to solve one, long-standing bug ocurring very
rarely on Haswell/Broadwell machines during the boot procedure of the
AudioDSP firmware. Clever/unfortunate user can increase the
reproduction rare to 100%.
The bug: an exception occurring early during FW boot (firmware side, not
the software one) leaves the firmware hanging and the existing software
code is incappable of recognizing such problem. The only solution a
user currently has is: rmmod and then modprobe the driver.
Recently, together with Krzysztof from the firmware team decided to take
it up and clear the dashboard.
The exception handling takes just a few lines of code (all part of the
first patch), everything else that this patchset is composed of improves
the debugability and logging. If anything similar pops up, the
developers can see what's going on.
Link: https://patch.msgid.link/20260528083444.1439233-1-cezary.rojewski@intel.com
Mimic mechanism found in the Intel's avs-driver and update the existing
IPC payload tracing to allow for pretty printing even large payloads.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260528083444.1439233-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An exception may occur during the firmware booting procedure. In such
case the firmware sends COREDUMP_REQUESTS and expects the driver to dump
relevant information and finish with the COREDUMP_RELEASE write.
To distinguish such situation from generic timeout, always signal
fw_ready completion when a coredump request is received and translate
it to -EREMOTEIO in catpt_boot_firmware().
The "FW READY" print makes the success clearly visible even when
the event-traces are not enabled.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260528083444.1439233-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit fe49fd940e ("KVM: arm64: Move VTCR_EL2 into struct s2_mmu"),
@arch is no longer required to obtain the per-kvm_s2_mmu vtcr and can be
removed from __load_stage2().
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://patch.msgid.link/20260318144305.56831-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that Nouveau supports GA100 properly, it should no longer require
the NvEnableUnsupportedChipsets parameter in order to enable it.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-11-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Nouveau supports Turing and Ampere GPUs with or without GSP-RM.
Support without GSP-RM is mostly academic, since GSP-RM is
needed to run the GPU at full clocks. It is also the default
mode for these GPUs.
GA100 is a special case, however. The current code has some support
for running GA100 without GSP-RM, but several features are missing.
More importantly, some required firmware images like ucode_ahesasc.bin
are not available and would need to be provided by Nvidia.
To prevent Nouveau from even trying to boot on GA100 without GSP-RM,
remove the non-GSP fallback option in the ga100_gsps[] array.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-10-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The GPU's ROM may begin with an Init-from-ROM (IFR) header that precedes
the PCI Expansion ROM images (VBIOS). When present, the PROM shadow
method must parse this header to determine the offset where the PCI ROM
images actually begin, and adjust all subsequent reads accordingly.
On most GPUs this is not needed because either the PRAMIN shadow method
(which reads from VRAM via the display engine) succeeds first, or the IFR
microcode has already applied the ROM offset so that PROM reads
transparently skip the header. However, on GA100 neither of these
applies: GA100 has no display engine (so PRAMIN is unavailable), and the
IFR offset is not applied to PROM reads on this GPU.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-9-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The NV_FUSE_STATUS_OPT_DISPLAY register is used to determine whether
the GPU has display hardware. The current code that normally reads
this register is instead hard-coded to check for GA100 vs later GPUs.
Since this function is called only on pre-Hopper GPUs, and this
if-statement applies only to GA100 and later, the check works
because GA100 is the only non-display Ampere and Ada GPU.
However, there actually is a register that can be read, so we should
use it.
Fixes: a34632482f ("drm/nouveau/bios/ga10[024]: initial support")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-8-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When booting with GSP-RM, the FRTS data region normally needs to be
allocated. However, on GA100, this region is not used and so its
size needs to be set to zero.
The truth is that GA100 is just special, and the simplest way to
determine the proper FRTS data region size is to check for this
GPU specifically.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-7-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On some Nvidia GPUs (i.e. GA100), the FRTS region is not allocated
(its size is set to 0). In such cases, FWSEC-FRTS should not be run.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-6-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On GA100, the row remapper hardware reserves a small amount of DRAM at
the end of framebuffer for spare rows used to repair memory errors at
runtime. When an uncorrectable ECC error is detected in a DRAM row,
the row remapper redirects accesses to a spare row, transparently
repairing the fault.
The LOCAL_MEMORY_RANGE register (0x100ce0) reports the GPU's FB address
range, but its encoding rounds to 1GB boundaries. On GA100, VBIOS
originally rounded this value down, which could lose up to ~1GB of
usable FB. As a workaround, newer VBIOS instead rounds up to the next
1GB boundary and programs MMU_LOCK (registers 0x1fa82c/0x1fa830) to
mark the gap between the actual usable FB and the rounded-up range as
reserved.
OpenRM's kgspCalculateFbLayout_TU102() handles this by reading the
MMU_LOCK registers and computing the WPR top boundary as:
vbiosReservedOffset = min(mmuLockLo, vgaWorkspaceOffset)
Without this, the WPR region is placed at the top of LOCAL_MEMORY_RANGE,
which overlaps the reserved region. The booter firmware detects this
and rejects the WPR layout.
Add ga100_gsp_mmu_lock_lo() to read the MMU_LOCK range and clamp
gsp->fb.bios.addr accordingly, mirroring OpenRM's behavior.
This is a GA100-only issue. GA102 and later add the
NV_USABLE_FB_SIZE_IN_MB register which reports the correct usable FB
size directly, eliminating the need for the MMU_LOCK workaround.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-5-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In OpenRM's kgspCalculateFbLayout_TU102(), gspFwWprEnd is derived from
vbiosReservedOffset, which is computed as:
vbiosReservedOffset = min(mmuLockLo, vgaWorkspaceOffset)
The VGA workspace offset is one input into this calculation, not the
direct source of gspFwWprEnd. vbiosReservedOffset is the effective
top boundary for WPR2 placement, and it may be lower than the VGA
workspace when VBIOS has locked a region via MMU_LOCK.
In Nouveau, gsp->fb.bios.addr is the equivalent of vbiosReservedOffset,
while gsp->fb.bios.vga_workspace.addr corresponds to the raw VGA
workspace location. The original code assigned vga_workspace.addr to
gspFwWprEnd, which produced the correct result only because bios.addr
was always set equal to vga_workspace.addr and never adjusted.
Use gsp->fb.bios.addr for gspFwWprEnd to correctly mirror OpenRM's
layout logic, so that future adjustments to bios.addr (such as clamping
it to an MMU_LOCK boundary) are properly reflected in the WPR metadata
passed to the booter.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-4-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The booter-load and booter-unload firmware run on the SEC2 falcon.
During tu102_gsp_oneinit(), the booter constructor needs device->sec2
to access the SEC2 falcon.
Without the .sec2 entry, device->sec2 is NULL and this dereference
crashes during GSP-RM boot.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-3-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
buf_printf() uses a fixed-size stack buffer. vsnprintf() returns the
number of bytes that *would* have been written to that buffer, which can
be larger than the size of said buffer if the formatted string is too
long.
The problem is that whenever this happens buf_printf() currently passes
this length, unchecked, to buf_write(), which silently reads past the
stack buffer and copies invalid data into the output buffer.
Fix this by detecting vsnprintf() failures and truncations before
appending to the output buffer, and report a fatal error instead of
producing corrupt symbol names.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260527-nova-exports-v2-1-06de4c556d55@nvidia.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add support for the %{?dist} macro in the kernel.spec file. This enables
building and releasing kernel RPMs with a custom distribution suffix
(e.g., via rpmbuild's --define option) to better match production
environment tracking.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://patch.msgid.link/20260526062732.84006-1-laoar.shao@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Clean up the remaining IS_ERR_OR_NULL() checks in ctrl.c and rpc.c.
The underlying functions return error pointers, so IS_ERR() is
sufficient.
This affects:
- r535_gsp_rpc_ctrl() in ctrl.c
- r535_gsp_rpc_ctor() in rpc.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-6-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Replace WARN_ON(IS_ERR_OR_NULL()) with WARN_ON(IS_ERR()) in various
GSP-RM files. The underlying functions return error pointers, so
checking for NULL is redundant.
This affects:
- r535_bar_bar2_update_pde() in bar.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-5-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Clean up IS_ERR_OR_NULL() checks in the core RPC and alloc
implementation files. The underlying functions return error pointers,
so IS_ERR() is sufficient.
This affects:
- r535_gsp_rpc_rm_free() in alloc.c
- r535_gsp_rpc_rm_alloc_push() in alloc.c
- r535_gsp_msgq_recv() in rpc.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-4-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
The underlying nvkm_gsp_rpc_get() function returns error pointers,
so checking for NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR()
instead.
This affects nvkm_gsp_rpc_rd().
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-3-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
The underlying functions already return error pointers, so checking for
NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR() instead.
This affects:
- nvkm_gsp_rm_alloc_get()
- nvkm_gsp_rm_alloc()
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-2-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Commit 8312cab5ff ("timers/migration: Rename 'online' bit to
'available'") renamed the 'online' field of struct tmigr_cpu to
'available'. The kernel doc comment above the struct still describes the
old field name.
Update it to reflect the actual field name and use the 'available' wording
in the description.
Fixes: 8312cab5ff ("timers/migration: Rename 'online' bit to 'available'")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260526022106.1302279-1-zhanxusheng@xiaomi.com
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing.
Cc: stable@vger.kernel.org
Fixes: 5ae6e89f74 ("HID: wacom: implement the finger part of the HID generic handling")
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
cgroup.max.descendants and cgroup.max.depth are shown through seq_file.
Their show callbacks read cgrp->max_descendants and cgrp->max_depth with
READ_ONCE(), respectively.
The corresponding write callbacks update the same scalar fields while
holding the cgroup lock, but the seq_file show path does not serialize
against those stores. This leaves the lockless show-side loads annotated
with READ_ONCE(), while the corresponding stores remain plain stores.
Use WRITE_ONCE() for the updates so the intended lockless access is marked
consistently on both sides. This does not change locking, ordering, or
user-visible semantics.
Assisted-by: OpenAI-Codex:gpt-5.5
Signed-off-by: Ren Tamura <ren.tamura.oss@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
