atmel_sha204a_probe() registers the hwrng before creating the sysfs
group. Mirror this order in atmel_sha204a_remove() by removing the sysfs
group before unregistering the hwrng.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop of_match_ptr() because OF matching is stubbed out when CONFIG_OF=n.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_DEV_OMAP_DES only depends on ARCH_OMAP2PLUS, which is ARM-only
and selects OF via ARM's USE_OF, making any non-OF code unreachable.
Add COMPILE_TEST so the driver can be built with CONFIG_OF=n, making the
non-OF code reachable.
Fix the resulting non-OF build failures:
- omap_des_irq() was defined inside a CONFIG_OF block, but is referenced
unconditionally from omap_des_probe(). Move the CONFIG_OF guard so it
only covers omap_des_get_of().
- The non-OF omap_des_get_of() stub took a struct device *, while
omap_des_probe() passes a struct platform_device *. Make the stub
prototype match the OF implementation and the caller.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The last MIPS crypto code was moved to lib/crypto/mips in
commit c9e5ac0ab9 ("lib/crypto: mips/md5: Migrate optimized code into
library"). However, arch/mips/crypto still contains stub Kconfig,
Makefile, and .gitignore files. Remove these unnecessary files.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All LoongArch crypto code was moved to arch/loongarch/lib in
commit 72f51a4f4b ("loongarch/crc32: expose CRC32 functions through
lib"). However, arch/loongarch/crypto still contains stub Kconfig and
Makefile files. Remove these unnecessary files.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memcpy_and_pad() instead of memcpy() followed by memset() to
simplify atmel_sha_hmac_setup().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop of_match_ptr() because OF matching is stubbed out when CONFIG_OF=n.
Indent bcm_spu_pdriver.driver and its members while at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a descriptor ring reset. This causes a hang in the
driver's unload/load sequence.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback already has the correct type - remove the redundant cast.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The UX500 crypto drivers were removed in commit 453de3eb08
("crypto: ux500/cryp - delete driver") and commit dd7b7972cb
("crypto: ux500/hash - delete driver"). No file includes
this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit "gpu: host1x: Allow entries in BO caches to be freed",
host1x_bo_pin() and host1x_bo_unpin() handle the bo's refcount
themselves. .pin/.unpin callbacks should not adjust it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the simpler min() macro since the values are unsigned and
compatible.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
x509_load_certificate_list() seeks to enforce that a certificate starts
with 0x30 0x82 (ASN.1 SEQUENCE tag followed by a length of more than 256
and less than 65535 bytes).
But it only enforces that *either* of those two byte values are present,
instead of checking for the *conjunction* of the two values. Fix it.
Fixes: 631cc66eb9 ("MODSIGN: Provide module signing public keys to the kernel")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/r/20260508033917.B5873C2BCB0@smtp.kernel.org/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.7+
Reviewed-by: Ignat Korchagin <ignat@linux.win>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The term "capability" typically refers to an ability to perform an
action, whereas "capacity" denotes a measurable amount of resources.
Since the sysfs-driver-qat_rl document describes remaining resources
available to perform work, "capacity" is the more accurate term.
Replace "capability" with "capacity" in the document.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A reset requested through /sys/bus/pci/devices/.../reset invokes the
driver reset_prepare() and reset_done() callbacks. The QAT driver does
not implement those callbacks today, so the reset proceeds without
quiescing the device or bringing it back up afterward, which leaves
the device unusable.
Hook reset_prepare() and reset_done() into adf_err_handler so the
common shutdown and recovery flow also runs for reset. Skip device
quiesce if the device is already in a down state.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the shutdown and recovery sequences out of adf_error_detected()
and adf_slot_reset() into reset_prepare() and reset_done() helpers.
This makes the AER recovery path easier to follow and prepares the
common reset flow for reuse by additional PCI reset callbacks without
duplicating the logic.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Skip the shutdown and restart flow when adf_slot_reset() is entered
for a device that is already down. In that case, leave
ADF_STATUS_RESTARTING clear and let adf_slot_reset() restore PCI
function state without calling adf_dev_up(), re-enabling SR-IOV, or
sending restarted notifications.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT driver currently toggles PCI bus mastering in multiple places
(probe paths, and reset callbacks). This makes BME state depend on
call ordering and on what PCI command bits were captured in saved PCI
config state.
Make BME control explicit and deterministic:
- remove pci_set_master() from device-specific probe paths
- add adf_set_bme() and call it from adf_dev_init() so BME is enabled
at one point before device bring-up
- drop redundant pci_set_master() and pci_clear_master from adf_aer.c
and rely on the unified init path for BME enablement
This is in preparation for adding reset_prepare() and reset_done()
hooks. In the PCI reset callback flow, the PCI core saves and
restores device configuration state around reset_prepare() and
reset_done(). This change is needed to ensure that we are able to
properly shutdown or reinitialize the device post sysfs triggered
resets.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Send fatal error notifications to subsystems and VFs as soon as
AER error detection starts, before entering the reset preparation
shutdown sequence.
This reduces notification latency and ensures peers are informed
immediately on fatal detection, rather than after restart-state setup
and arbitration teardown.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a reset is triggered via sysfs, the PCI core invokes the
reset_prepare() callback while holding pci_dev_lock(), which includes
the PCI configuration space access semaphore. If reset_prepare() calls
adf_dev_down(), the call chain adf_dev_stop() -> adf_disable_sriov()
-> pci_disable_sriov() attempts to acquire the same semaphore,
resulting in a deadlock.
Avoid this by skipping pci_disable_sriov() when ADF_STATUS_RESTARTING
is set. During reset the PCI topology is preserved, so VF devices
remain valid and enumerated across the reset. VF notification and the
quiesce handshake via adf_pf2vf_notify_restarting() are still
performed unconditionally so that VFs stop submitting work before the
PF shuts down.
Correspondingly, skip pci_enable_sriov() in adf_enable_sriov() when
VFs are already present, since their PCI devices were preserved from
before the restart.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The VF2PF interrupt handler queues PF-side response work that stores a
raw pointer to per-VF state (struct adf_accel_vf_info). Currently,
adf_disable_sriov() destroys per-VF mutexes and frees vf_info without
stopping new VF2PF work or waiting for in-flight workers to complete. A
concurrently scheduled or already queued worker can then dereference
freed memory.
This manifests as a use-after-free when KASAN is enabled:
BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0
Write of size 8 at addr 0000000000000260 by task kworker/24:2/...
Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat]
Call Trace:
kasan_report+0x119/0x140
mutex_lock+0x76/0xe0
adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat]
adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat]
adf_iov_send_resp+0x8c/0xe0 [intel_qat]
process_one_work+0x6ac/0xfd0
worker_thread+0x4dd/0xd30
kthread+0x326/0x410
ret_from_fork+0x33b/0x670
Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker
processing, and interrupt re-enabling during teardown. Set this flag
atomically with the hardware interrupt mask inside
adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE
cluster MSI-X interrupt and flush the PF response workqueue before
tearing down per-VF locks and state so all in-flight work completes
before vf_info is destroyed.
Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and
unmask all VF2PF interrupts under the same lock when SR-IOV is
re-enabled. This ensures the software flag and hardware state transition
atomically on both the enable and disable paths.
Cc: stable@vger.kernel.org
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The carry flag calculation fails when r01.m_high is saturated
(0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows.
The condition (r01.m_high < product.m_high) doesn't handle the case
where r01.m_high == product.m_high and an additional carry exists
from lower-bit overflow.
When commit 3c4b23901a ("crypto: ecdh - Add ECDH software support")
introduced crypto/ecc.c, it split the muladd() function in the
micro-ecc library into separate mul_64_64() and add_128_128() helpers.
It seems the check got lost in translation.
Add proper handling for this boundary by accounting for the carry
from the lower addition.
Fixes: 3c4b23901a ("crypto: ecdh - Add ECDH software support")
Signed-off-by: Anastasia Tishchenko <sv3iry@gmail.com>
Cc: stable@vger.kernel.org # v4.8+
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In-tree drivers do not need MODULE_VERSION as the kernel release
identifies the version of their code. The static version "0.6.0", which
the QAT drivers currently report, can be misleading as it might suggest
the drivers are outdated.
Remove MODULE_VERSION() from all QAT driver modules and the related
ADF_DRV_VERSION, ADF_MAJOR_VERSION, ADF_MINOR_VERSION and
ADF_BUILD_VERSION macros from adf_common_drv.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace two consecutive min() calls with min3() to simplify the code.
And since count is unsigned and cannot be less than zero, adjust the if
check and update the comment accordingly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use max() to simplify mv_cesa_probe() and improve its readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the character device and IOCTL interface have been removed,
adf_ctl_drv.c only contains module_init/module_exit hooks. Rename it
to adf_module.c to better reflect its purpose and rename the init/exit
functions accordingly.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Reported-by: Bin Yu <byu@xidian.edu.cn>
Reported-by: MingYu Wang <w15303746062@163.com>
Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/
Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lower the priority of HiSilicon's crypto implementations to allow more
suitable alternatives to be selected. For example, certain kernel
use-cases do not benefit from HiSilicon's symmetric crypto algorithms.
This change ensures that more appropriate options are chosen first while
retaining HiSilicon's implementations as alternatives.
Signed-off-by: lizhi <lizhi206@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The constification of device attributes will require a transition phase,
where 'struct device_attribute' contains a classic non-const and a new
const variant of the 'show' and 'store' callbacks.
As __ATTR() and friends can not handle this duplication stop using them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-3-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the upcoming constification of device attributes the generic
__ATTR() macros are insufficient.
Prepare for a split by introducing new low-level macros specific to
device attributes.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-2-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/20260511155755.34428-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deferred_probe_timeout_work may be permanently and unexpectedly
canceled when deferred_probe_extend_timeout() executes concurrently.
Starting with deferred_probe_timeout_work pending, the problem can
occur after the following sequence:
CPU0 CPU1
deferred_probe_extend_timeout
-> cancel_delayed_work() => true
deferred_probe_extend_timeout
-> cancel_delayed_work()
-> __cancel_work()
-> try_grab_pending()
-> schedule_delayed_work()
-> queue_delayed_work_on()
(Since the pending bit is grabbed,
it just returns without queuing)
-> set_work_pool_and_clear_pending()
(This __cancel_work() returns false and
the work will never be queued again)
The root cause is that the WORK_STRUCT_PENDING_BIT of the work_struct
is set temporarily in __cancel_work() (via try_grab_pending()). This
transient state prevents the work_struct from being successfully queued
by another CPU.
To fix this, replace the original non-atomic cancel and schedule
mechanism with mod_delayed_work(). This ensures the modification is
handled atomically and guarantees that the work is not lost.
Fixes: 2b28a1a84a ("driver core: Extend deferred probe timeout on driver registration")
Signed-off-by: Zhang Yuwei <zhangyuwei20@huawei.com>
Link: https://patch.msgid.link/20260410024448.387231-1-zhangyuwei20@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When called with FWNODE_GRAPH_ENDPOINT_NEXT, the function walks every
endpoint under the requested port and, for any endpoint whose ID is
greater than or equal to the requested one, may store a fwnode
reference in best_ep via fwnode_handle_get(). If a later iteration
finds an exact-ID match, the function returns that endpoint directly
without dropping the reference held by best_ep, leaking it.
Drop the saved candidate before returning the exact-match endpoint.
This affects callers that use FWNODE_GRAPH_ENDPOINT_NEXT to ask for
the next endpoint with ID >= the requested one (used by a number of
media drivers, e.g. imx7/8, sun6i CSI, omap3isp, xilinx-csi2,
stm32-csi). Each leak retains a fwnode reference until reboot/unbind.
Fixes: 0fcc2bdc8a ("device property: Add fwnode_graph_get_endpoint_by_id()")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://patch.msgid.link/20260514171455.27271-1-sozdayvek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constify the groups array argument in driver_add_groups and
driver_remove_groups. This allows to pass constant arrays as
arguments.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/21a1e5f1-c6a0-4f6f-aa86-1e6abd25f9c6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Change devfreq_event_class to be a const struct class and drop
the class_create() call. Compile tested.
Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260303162505.3748001-1-jkoolstra@xs4all.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kconfig symbol DEV_COREDUMP is of type bool, therefore devcoredump
can't be built as a module and the exit code is a no-op.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/39a3821b-03d6-4ff0-97b7-82411a76d39a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
converted the WARN_ONCE() in kernfs_put() to read kn->name and
parent->name via rcu_dereference(), but kernfs_put() has callers that
hold neither kernfs_rwsem nor the RCU read lock. The inode eviction
path driven by memory reclaim is one such case:
kernfs_put+0x53/0x60 fs/kernfs/dir.c:602
evict+0x3c2/0xad0 fs/inode.c:846
iput_final fs/inode.c:1966 [inline]
iput.part.0+0x605/0xf50 fs/inode.c:2015
iput+0x35/0x40 fs/inode.c:1981
dentry_unlink_inode+0x2a1/0x490 fs/dcache.c:467
__dentry_kill+0x1d0/0x600 fs/dcache.c:670
shrink_dentry_list+0x180/0x5e0 fs/dcache.c:1174
prune_dcache_sb+0xea/0x150 fs/dcache.c:1256
super_cache_scan+0x328/0x550 fs/super.c:223
...
kswapd+0x556/0xba0 mm/vmscan.c:7343
lockdep complains with "suspicious RCU usage" whenever the WARN
fires from such a context.
Wrap the rcu_dereference() calls in an RCU read-side critical section.
Gate on the active-ref check so the lock is only taken when the WARN
is about to fire.
Note that this does not address the underlying imbalance in
kn->active that triggers the WARN.
Fixes: 741c10b096 ("kernfs: Use RCU to access kernfs_node::name.")
Reported-by: syzbot+0dfe499ea713e0a15bec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0dfe499ea713e0a15bec
Signed-off-by: Conor Kotwasinski <conorkotwasinski2024@u.northwestern.edu>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://patch.msgid.link/20260416134315.1474726-1-conorkotwasinski2024@u.northwestern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Verisilicon display controllers support hardware cursors per output
port.
Add support for them as cursor planes.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506175610.2542888-3-zhengxingda@iscas.ac.cn
Different display controller variants support different maximum cursor
size. All known DC8200 variants support both 32x32 and 64x64, but some
DC8000 variants support either only 32x32 or up to 256x256.
The minimum size is fixed at 32 and only PoT square sizes are supported.
Add the max cursor size field to HWDB and fill all entries with 64.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506175610.2542888-2-zhengxingda@iscas.ac.cn
Verify that SPDX-License-Identifier headers at the top of source files
are parsed correctly.
Assisted-by: Cursor:claude-sonnet-4-5
Assisted-by: OpenCode:GLM-4-7
Co-developed-by: Maximilian Huber <maximilian.huber@tngtech.com>
Signed-off-by: Maximilian Huber <maximilian.huber@tngtech.com>
Signed-off-by: Luis Augenstein <luis.augenstein@tngtech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add unit tests to verify that command parsers correctly extract
input files from build commands.
Assisted-by: Cursor:claude-sonnet-4-5
Assisted-by: OpenCode:GLM-4-7
Co-developed-by: Maximilian Huber <maximilian.huber@tngtech.com>
Signed-off-by: Maximilian Huber <maximilian.huber@tngtech.com>
Signed-off-by: Luis Augenstein <luis.augenstein@tngtech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the SPDX build graph to describe the relationships
between source files in the source SBOM and output files in
the output SBOM.
Assisted-by: Cursor:claude-sonnet-4-5
Assisted-by: OpenCode:GLM-4-7
Co-developed-by: Maximilian Huber <maximilian.huber@tngtech.com>
Signed-off-by: Maximilian Huber <maximilian.huber@tngtech.com>
Signed-off-by: Luis Augenstein <luis.augenstein@tngtech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
