mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,462,193 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Chao Yu
|
cf716276b0 |
f2fs: avoid unnecessary sanity check on ckpt_valid_blocks
The calculation of sec->ckpt_valid_blocks are the same in both set_ckpt_valid_blocks() and sanity_check_valid_blocks(), so it doesn't necessary to call sanity_check_valid_blocks() right after set_ckpt_valid_blocks(). Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Chao Yu
|
d27e443102 |
f2fs: misc cleanup in f2fs_record_stop_reason()
Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Chao Yu
|
98fd20b9cf |
f2fs: fix wrong description in printed log
This patch fixes wrong description in printed log: "SSA and SIT" -> "SIT and SSA" Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Bryam Vargas
|
378acf3cf1 |
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
When the flexible_inline_xattr feature is enabled, do_read_inode() loads
the on-disk i_inline_xattr_size unconditionally:
if (f2fs_sb_has_flexible_inline_xattr(sbi))
fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size);
but sanity_check_inode() only range-checks it when the inode also has the
FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline
data but not FI_INLINE_XATTR -- the normal layout for an inline
directory -- therefore keeps a fully attacker-controlled
i_inline_xattr_size from a crafted image.
get_inline_xattr_addrs() returns that value with no flag gating, so it
feeds the inode geometry:
MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1)
NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...)
addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size
A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY()
negative, so make_dentry_ptr_inline() sets d->max (int) to a negative
value. The inline directory walk then compares an unsigned long bit_pos
against that negative d->max, which is promoted to a huge unsigned bound,
and reads far past the inline area:
while (bit_pos < d->max) /* fs/f2fs/dir.c */
... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ...
Mounting a crafted image and reading such a directory triggers an
out-of-bounds read in f2fs_fill_dentries(); the same underflow also
corrupts ADDRS_PER_INODE for regular files.
Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the
flexible_inline_xattr feature is enabled -- i.e. whenever the value is
loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE
bound gated on inodes that actually carry an inline xattr, so legitimate
inodes with i_inline_xattr_size == 0 are still accepted.
Cc: stable@vger.kernel.org
Fixes:
|
||
Zhang Cen
|
c4810ada31 |
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
f2fs_acl_count() only validates the aggregate ACL xattr length. A
malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only
contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk()
then reads entry->e_id before verifying that a full entry fits.
Require a short entry before reading e_tag and e_perm, and require a
full entry before reading e_id for ACL_USER and ACL_GROUP. Return
-EFSCORRUPTED from these new truncated-entry checks, while keeping the
pre-existing -EINVAL paths unchanged.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0
RIP: 0033:0x7f4b835ea7aa
The buggy address belongs to the object at ffff888114589960 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 8-byte
region [ffff888114589960, ffff888114589968)
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
__f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x224/0x430 (?:?)
kasan_report+0xe0/0x110 (?:?)
__f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169)
__get_acl+0x281/0x380 (?:?)
vfs_get_acl+0x10b/0x190 (?:?)
do_get_acl+0x2a/0x410 (?:?)
do_get_acl+0x9/0x410 (?:?)
do_getxattr+0xe8/0x260 (?:?)
filename_getxattr+0xd1/0x140 (?:?)
do_getname+0x2d/0x2d0 (?:?)
path_getxattrat+0x16c/0x200 (?:?)
lock_release+0xc8/0x290 (?:?)
cgroup_update_frozen+0x9d/0x320 (?:?)
lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?)
trace_hardirqs_on+0x1a/0x170 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Cc: stable@kernel.org
Fixes:
|
||
Zhaoyang Huang
|
ccaba78582 |
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
This reverts commit |
||
Bart Van Assche
|
bdc7cfd780 |
f2fs: Split f2fs_write_end_io()
Prepare for running most of the write completion work asynchronously. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Bart Van Assche
|
7ba36a9ea8 |
f2fs: Rename f2fs_post_read_wq into f2fs_wq
Rename f2fs_post_read_wq into f2fs_wq. Create it unconditionally. Prepare for using this workqueue for completing write bios. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Bart Van Assche
|
41b7928813 |
f2fs: Prepare for supporting delayed bio completion
Use bio frontpadding to allocate memory for a work_struct when allocating a bio. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Wenjie Qi
|
242d30bfc0 |
f2fs: reject setattr size changes on large folio files
F2FS large folios are only enabled for immutable non-compressed files.
Writable open and writable mmap reject such mappings, but truncate(2)
through f2fs_setattr() misses the same guard.
If FS_IMMUTABLE_FL is cleared while the inode is still cached, the mapping
can keep large-folio support and ATTR_SIZE can change i_size. Reject size
changes in that state.
Cc: stable@kernel.org
Fixes:
|
||
Samuel Moelius
|
90e02a8e1b |
f2fs: validate dentry name length before lookup compares it
The f2fs dentry lookup path can use the on-disk name length before checking that the name fits in the dentry filename area. A corrupted dentry can then make lookup read beyond the filename slots. The bounds check needs to happen before any comparison that consumes the name length from disk. Reject dentries with invalid name lengths before comparing their names. Assisted-by: Codex:gpt-5.5-cyber-preview Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Samuel Moelius
|
cfcd0e49a1 |
f2fs: validate inline dentry name lengths before conversion
Inline dentry conversion copies names out of the inline dentry area before checking that each recorded name length fits in the available filename slots. A corrupted image can therefore make the conversion path read past the inline filename storage while building the regular dentry block. Validate each inline dentry name length against the inline filename area before copying it. Assisted-by: Codex:gpt-5.5-cyber-preview Signed-off-by: Samuel Moelius <samuel.moelius@trailofbits.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Mikhail Lobanov
|
a41075acde |
f2fs: read COW data with the original inode during atomic write
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin().
Fixes:
|
||
|
Wenjie Qi
|
222bc257a1 |
f2fs: skip inode folio lookup for cached overwrite
prepare_write_begin() first gets the inode folio and builds a dnode, then checks the read extent cache. For an ordinary overwrite of a non-inline and non-compressed file, an extent-cache hit already gives the data block address and the following path does not need to allocate or update any node state. Check the read extent cache before fetching the inode folio for that narrow case. Keep the existing paths for inline data, compressed files, and writes that may extend past EOF, where the helper may need inline conversion, compression preparation, or block reservation. This avoids a node-folio lookup in the buffered overwrite fast path when the mapping is already cached. In a QEMU/KASAN x86_64 VM, using a small buffered overwrite workload on an existing 1MiB file, median time improved as follows: 64-byte overwrites: 1724.93 ns/write -> 1560.24 ns/write 256-byte overwrites: 1713.38 ns/write -> 1577.85 ns/write Function profiling of 20k 64-byte overwrites showed f2fs_get_inode_folio() calls drop from 20004 to 4. Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Wenjie Qi
|
6d874b65aa |
f2fs: keep atomic write retry from zeroing original data
A partial atomic write reserves a block in the COW inode before reading the
original data page for the untouched bytes in that page.
If that read fails, write_begin returns an error but leaves the COW inode
entry as NEW_ADDR. A retry of the same partial write then finds the COW
entry, treats it as existing COW data, and f2fs_write_begin() zeroes the
whole folio because blkaddr is NEW_ADDR.
If the retry is committed, the bytes outside the retried write range are
committed as zeroes instead of preserving the original file contents.
Only use the COW inode as the read source when it already has a real data
block. If the COW entry is still NEW_ADDR, treat it as a reservation to
reuse: keep reading the old data from the original inode and avoid
reserving or accounting the same atomic block again.
Cc: stable@kernel.org
Fixes:
|
||
|
Wenjie Qi
|
846c499a65 |
f2fs: validate orphan inode entry count
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes:
|
||
|
Wenjie Qi
|
28ebb922b9 |
f2fs: honor per-I/O write streams for direct writes
io_uring can pass a per-I/O write stream through kiocb->ki_write_stream,
and block direct I/O propagates that value to bio->bi_write_stream.
F2FS added FDP stream mapping for DATA writes, but its direct write
submit hook always rewrites bio->bi_write_stream from the inode write
hint and F2FS temperature. As a result, a direct write with an explicit
io_uring write_stream is submitted to the F2FS-selected stream instead
of the user-requested stream.
Validate an explicit write stream before starting F2FS direct I/O, pass
the kiocb through the iomap private pointer, and preserve the per-I/O
stream in the direct write bio. When no per-I/O stream is supplied, keep
using the existing F2FS temperature-to-stream mapping.
Fixes: 42f7a7a50a33 ("f2fs: map data writes to FDP streams")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
||
|
Chao Yu
|
8712353ed8 |
f2fs: fix to do sanity check on f2fs_get_node_folio_ra()
kernel BUG at fs/f2fs/file.c:845! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845 Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90 RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283 RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000 RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504 RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002 R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0 Call Trace: <TASK> f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882 f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940 f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907 evict+0x61e/0xb10 fs/inode.c:841 f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224 get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694 vfs_get_tree+0x92/0x2a0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3758 [inline] do_new_mount+0x341/0xd30 fs/namespace.c:3834 do_mount fs/namespace.c:4167 [inline] __do_sys_mount fs/namespace.c:4383 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4360 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f count = ADDRS_PER_PAGE(dn.node_folio, inode); count -= dn.ofs_in_node; f2fs_bug_on(sbi, count < 0); The fuzz test will trigger above bug_on in f2fs. The root cause should be: in the corrupted inode, there is a direct node which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(), after f2fs_get_dnode_of_data() finds such dnode: 1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923 2) once dn.ofs_in_node points to addr[923, 1017] Then it will trigger the system panic. Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should not be an inode or xattr node, and then use it in below path to detect inconsistent node chain in inode mapping table: - f2fs_do_truncate_blocks - f2fs_get_dnode_of_data - f2fs_get_node_folio_ra - __get_node_folio - f2fs_sanity_check_node_footer - case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode Cc: stable@kernel.org Reported-by: syzbot+2488d8d751b27f7ce268@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69fa3697.170a0220.59368.0018.GAE@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Chao Yu
|
7967d563bc |
Revert: "f2fs: check in-memory sit version bitmap"
Commit
|
||
|
Chao Yu
|
a2b251259b |
Revert: "f2fs: check in-memory block bitmap"
Commit
|
||
|
Wenjie Qi
|
484c84ecc1 |
f2fs: avoid false shutdown fserror reports
F2FS records image errors and checkpoint-stop reasons through the same
s_error_work worker. The ordinary f2fs_handle_error() path only updates
s_errors, but the worker still calls fserror_report_shutdown()
unconditionally after committing the superblock.
As a result, a metadata corruption report can be followed by a synthetic
FAN_FS_ERROR event with ESHUTDOWN and an invalid superblock file handle,
even though no stop reason was recorded.
Track whether save_stop_reason() actually changed the stop_reason array
and only report the shutdown fserror for that case. Pure s_errors updates
still commit the superblock, but no longer generate a false shutdown event.
Fixes: 50faed607d32 ("f2fs: support to report fserror")
Cc: stable@kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
||
|
Wenjie Qi
|
5073c66a96 |
f2fs: validate compress cache inode only when enabled
F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode
number for the compressed page cache inode. That inode only exists when
the compress_cache mount option is enabled.
When compress_cache is disabled, max_nid is outside the valid inode
range. A corrupted directory entry that points to ino == max_nid should
therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino()
currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally,
so f2fs_iget() bypasses do_read_inode() and its nid range check, and
instantiates a fake internal inode instead.
Gate the compressed cache inode case on COMPRESS_CACHE, matching
f2fs_init_compress_inode(). With compress_cache disabled, ino ==
max_nid now follows the normal inode path and is rejected as an
out-of-range nid.
Cc: stable@kernel.org
Fixes:
|
||
|
Wenjie Qi
|
fcb05c26c2 |
f2fs: pass correct iostat type for single node writes
f2fs_write_single_node_folio() takes an io_type argument, but still passes FS_GC_NODE_IO to __write_node_folio() unconditionally. This was harmless while the helper was only used by f2fs_move_node_folio(), whose caller passes FS_GC_NODE_IO. However, commit |
||
Wenjie Qi
|
74c8d2ec95 |
f2fs: fix missing read bio submission on large folio error
f2fs_read_data_large_folio() can keep a read bio across multiple
readahead folios. If a later folio hits an error before any of its
blocks are added to the bio, folio_in_bio is false and the current error
path returns immediately after ending that folio.
This can leave the bio accumulated for earlier folios unsubmitted. Those
folios then never receive read completion, and readers can wait
indefinitely on the locked folios.
Route errors through the common out path so any pending bio is submitted
before returning. Stop consuming more readahead folios once an error is
seen, and only wait on and clear the current folio when it was actually
added to the bio.
Cc: stable@kernel.org
Fixes:
|
||
|
Chao Yu
|
e0288584ba |
f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue.
Cc: stable@kernel.org
Cc: Daeho Jeong <daehojeong@google.com>
Cc: Sunmin Jeong <s_min.jeong@samsung.com>
Fixes:
|
||
|
Chao Yu
|
8b4468ec02 |
f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs()
When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:
Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock
In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi);
Cc: stable@kernel.org
Fixes:
|
||
|
Chao Yu
|
47a60629ca |
f2fs: add logs in f2fs_disable_checkpoint()
In order to troubleshoot in which step we may block on during mount w/ checkpoint_disable mount option. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
liujinbao1
|
caac757a3d |
f2fs: add iostat latency tracking for direct IO
F2FS did not collect iostat latency for direct IO reads and writes, hook iomap_dio_ops.submit_io to bind an iostat context and record the submission timestamp. Replace bi_end_io with f2fs_dio_end_bio() to collect IO latency on completion before calling back to the original iomap_dio_bio_end_io(), to add iostat latency tracking support for F2FS DIO. Signed-off-by: shengyong1 <shengyong1@xiaomi.com> Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Daeho Jeong
|
5dfb768326 |
f2fs: optimize representative type determination in GC
In large section mode, do_garbage_collect() previously determined the section's representative type by looking only at the first segment of the section. However, if data was fsynced into an area previously used as a node section, and this area is recovered during roll-forward recovery after sudden power off (SPO), GC would incorrectly assume the section's type based on an empty or obsolete first segment. This caused the recovered data segment to be misunderstood as being stuck inside a node section, triggering false inconsistency panics (Inconsistent segment type in SSA and SIT) and subsequent mount failures. This patch optimizes do_garbage_collect() to determine the section's representative type by identifying the first segment that actually contains valid blocks (valid_blocks > 0) during the main GC loop. This eliminates false alarms from empty/obsolete leading segments while maintaining strict section-level type consistency checks for genuine corruption. Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
liujinbao1
|
f6b2456603 |
f2fs: Add trace_f2fs_fault_report
Add trace_f2fs_fault_report to trigger reporting upon f2fs_bug_on, need_fsck, stop_checkpoint, and handle_eio. Since f2fs_bug_on and need_fsck can be triggered in hundreds of scenarios, define set_sbi_flag as a macro to help capture the effective fault function and line number. Signed-off-by: shengyong1 <shengyong1@xiaomi.com> Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Cen Zhang
|
fb645a976f |
f2fs: annotate lockless NAT counter reads
nat_cnt[] is updated while callers hold nat_tree_lock, but F2FS samples the counters locklessly in f2fs_available_free_memory(), excess_dirty_nats(), and excess_cached_nats(). Those helpers only steer cache reclaim and background sync heuristics; they do not control NAT entry lifetime or checkpoint correctness. Document the intent with data_race(READ_ONCE()) and a short comment instead of adding locking to the balance path. Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
|
Cen Zhang
|
b952837f73 |
f2fs: annotate lockless last_time[] accesses
f2fs stores mount-wide activity timestamps in sbi->last_time[] and samples them from background discard, GC, and balance paths without a dedicated lock. The timestamps are used as best-effort heuristics to decide whether background work should run now or sleep a bit longer. The current helpers use plain loads and stores, so KCSAN can report races between frequent foreground updates and background readers. Exact freshness is not required here, but the intentional lockless accesses should be marked explicitly. Use WRITE_ONCE() in f2fs_update_time() and READ_ONCE() in f2fs_time_over() and f2fs_time_to_wait(). This preserves the existing heuristic behavior and avoids adding locking to hot paths. Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> |
||
Linus Torvalds
|
4708cac0e2 |
Staging driver updates for 7.2-rc1
Here is the big set of staging driver updates for 7.2-rc1.
Nothing major in here, just constant grind of tiny cleanups and coding
style fixes and wrapper removals. Overall more code was removed than
added, always a nice sign that things are progressing forward.
Changes outside of drivers/staging/ was due to the octeon driver
changes, which for some reason also lives partially in the mips
subsystem, someday that all will be untangled and cleaned up, or just
removed entirely, it's hard to tell which is going to be its fate.
Other than octeon driver cleanups, in here are the usual:
- rtl8723bs driver reworking and cleanups, being the bulk of this
merge window given all of the issues and wrappers involved in that
beast of a driver.
- most driver cleanups
- sm750fb driver cleanups (which might be done, as this really should
be moved to the drm layer one of these days...)
- other tiny staging driver cleanups and fixes
All of these have been in linux-next for many weeks with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk7UA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqGwCfTWeRfHlodxLtncg/2yLDpb+Z1oEAoMJml/AV
XAdQzdJVI1nOH6w9Qch/
=bqYI
-----END PGP SIGNATURE-----
Merge tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.2-rc1.
Nothing major in here, just constant grind of tiny cleanups and coding
style fixes and wrapper removals. Overall more code was removed than
added, always a nice sign that things are progressing forward.
Changes outside of drivers/staging/ was due to the octeon driver
changes, which for some reason also lives partially in the mips
subsystem, someday that all will be untangled and cleaned up, or just
removed entirely, it's hard to tell which is going to be its fate.
Other than octeon driver cleanups, in here are the usual:
- rtl8723bs driver reworking and cleanups, being the bulk of this
merge window given all of the issues and wrappers involved in that
beast of a driver
- most driver cleanups
- sm750fb driver cleanups (which might be done, as this really should
be moved to the drm layer one of these days...)
- other tiny staging driver cleanups and fixes
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (199 commits)
staging: most: video: avoid double free on video register failure
staging: sm750: rename CamelCase variable Bpp to bpp
staging: rtl8723bs: delete superfluous switch statement
staging: sm750fb: Mark g_noaccel, g_nomtrr and g_dualview as __ro_after_init
staging: rtl8723bs: propagate errno through hal xmit path
staging: rtl8723bs: propagate errno through xmit enqueue path
staging: rtl8723bs: convert rtw_xmit_classifier to return errno
staging: rtl8723bs: make rtw_xmit_classifier static
staging: rtl8723bs: simplify rtw_xmit_classifier control flow
staging: rtl8723bs: make _rtw_enqueue_cmd return 0 on success
staging: rtl8723bs: simplify rtw_enqueue_cmd control flow
staging: rtl8723bs: make _rtw_enqueue_cmd static
staging: rtl8723bs: simplify _rtw_enqueue_cmd control flow
staging: rtl8723bs: fix multiple blank lines in more hal/ files
staging: rtl8723bs: remove unused TXDESC_64_BYTES code
staging: rtl8723bs: remove unused DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code
staging: rtl8723bs: fix multiple blank lines in hal/Hal* files
staging: rtl8723bs: fix multiple blank lines in hal/ files
staging: rtl8723bs: rtw_mlme: add blank line for readability
staging: rtl8723bs: rtw_mlme: wrap rtw_sitesurvey_cmd condition
...
|
||
|
Linus Torvalds
|
0000d9ccbc |
Char/Misc/IIO/FPGA/GPIB/etc driver updates for 7.2-rc1
Here is the big set of char, misc, iio, fpga, and other small driver subsystems changes for 7.2-rc1. Lots of little stuff in here, the majority being of course the IIO driver updates, as a list they are: - IIO driver updates and additions - GPIB driver bugfixes and cleanups - Android binder driver updates (rust and C version) - counter driver updates - MHI driver updates - mei driver updates - w1 driver updates - interconnect driver updates - Comedi driver fixes and updates - some obsolete char drivers removed (applicom and dtlk) - hwtracing driver updates - other tiny driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk4Gg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yl89wCdG1WBLsvKHZ3zaFWd4POE8G/gS1YAnRf0GcRB 0F1/iBXSZLaRF/p9dsGq =fg13 -----END PGP SIGNATURE----- Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver updates from Greg KH: "Here is the big set of char, misc, iio, fpga, and other small driver subsystems changes for 7.2-rc1. Lots of little stuff in here, the majority being of course the IIO driver updates, as a list they are: - IIO driver updates and additions - GPIB driver bugfixes and cleanups - Android binder driver updates (rust and C version) - counter driver updates - MHI driver updates - mei driver updates - w1 driver updates - interconnect driver updates - Comedi driver fixes and updates - some obsolete char drivers removed (applicom and dtlk) - hwtracing driver updates - other tiny driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) w1: ds2482: Use named initializers for arrays of i2c_device_data firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure iio: chemical: scd30: Replace manual locking with RAII locking iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle() iio: dac: ad5686: create bus ops struct iio: dac: ad5686: cleanup doc header of local structs iio: dac: ad5686: add control_sync() for single-channel devices iio: dac: ad5686: add helpers to handle powerdown masks iio: dac: ad5686: add of_match table to the spi driver iio: dac: ad5686: drop enum id iio: dac: ad5686: remove redundant register definition iio: dac: ad5686: refactor include headers iio: adc: ad4080: fix AD4880 chip ID iio: light: veml3328: add support for new device dt-bindings: iio: light: veml6030: add veml3328 fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() ... |
||
Eric Biggers
|
696c030e1e |
fscrypt: Replace mk_users keyring with simple list
Change mk_users (the set of user claims to an fscrypt master key) from a 'struct key' keyring to a simple linked list. It's still a collection of 'struct key' for quota tracking. It was originally thought to be natural that a collection of 'struct key' should be held in a 'struct key' keyring. In reality, it's just been causing problems, similar to how using 'struct key' for the filesystem keyring caused problems and was removed in commit |
||
|
Eric Biggers
|
dd015b566d |
fscrypt: Fix key setup in edge case with multiple data unit sizes
The addition of support for customizable data unit sizes introduced an
edge case where a file's contents can be en/decrypted with the wrong
data unit size. It occurs when there are multiple v2 policies that:
- Have *different* data unit sizes, via the log2_data_unit_size field
- Share the same master_key_identifier, contents_encryption_mode, and
either FSCRYPT_POLICY_FLAG_DIRECT_KEY,
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32, or
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64
- Are being used on the same filesystem, which also must be mounted with
the "inlinecrypt" mount option.
Fortunately this edge case doesn't actually occur in practice. I just
found it via code review. But it needs to be fixed regardless.
The bug is caused by the data unit size not being fully considered when
blk_crypto_keys are cached in mk_direct_keys, mk_iv_ino_lblk_32_keys,
and mk_iv_ino_lblk_64_keys. They're differentiated only by master key,
encryption mode, and flag. However, each one actually has a data unit
size too. Only the first data unit size that is cached is used.
To fix this, start using the data unit size to differentiate the cached
keys. For several reasons, including avoiding increasing the size of
struct fscrypt_master_key, just replace all three arrays with a single
linked list instead of changing them into two-dimensional arrays. This
works well when considering that in practice at most 2 entries are used
across all three arrays, so it was already mostly wasted space.
For simplicity, make the list also take over the publish/subscribe of
the prepared key itself. That is, create separate list nodes for
blk_crypto_keys vs crypto_skciphers, and add nodes to the list only when
their key is actually prepared. (Note that the legacy
fscrypt_direct_keys table in fs/crypto/keysetup_v1.c already works this
way.) This eliminates the need for the additional memory barriers when
reading and writing the fields of struct fscrypt_prepared_key.
Note that I technically should have included the data unit size in the
HKDF info string as well. But it's too late to change that.
Fixes:
|
||
|
Linus Torvalds
|
364f4a55c6 |
USB/Thunderbolt driver changes for 7.2-rc1
Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly.
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk1lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymieQCg1VgSwN2sXBtMDGi4Sca+ecADx2kAn0bm/e/C
JjShAcuQ/vj/6zNJm0ll
=vXkP
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
|
||
|
Linus Torvalds
|
e4b4bfaa50 |
SPDX patches for 7.2-rc1
Here is a "big" set of SPDX-like patches for 7.2-rc1. It is the addition of the ability for the kernel build process to generate a Software Bill of Materials (SBOM) in the SPDX format, that matches up exactly with just the files that are actually built for the specific kernel image generated. To generate a sbom, after the kernel has been built, just do: make sbom and marvel at the JSON file that is generated... This is needed by users for environments in which a SBOM is required (medical, automotive, anything shipped in the EU, etc.) and cuts down by a massive size the "naive" SBOM solution that many vendors have done by just including _all_ of the kernel files in the resulting document. This result is still a giant JSON file, that I am told parses properly, so we just have to trust that it is properly inclusive as attempting to parse that thing by hand is impossible. The scripts here are self-contained python scripts, no additional libraries or tools to create the SBOM are needed, which is important for many build systems. Overall it's just a bit over 4000 lines of "simple" python code, the most complex part is the regex matching lines, but those are nothing compared to what we maintain in scripts/checkpatch.pl today... The various parts where the tool touches the kbuild subsystem have been acked by the kbuild maintainer, so all should be good here. All of these patches have been in linux-next for weeks with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk0Hg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymLvgCffz6hsZs43VVpbqi7J1UKnxtlcAcAn0Qv2DgS wjRUwh7+ja4WLOaDnRsh =zSW4 -----END PGP SIGNATURE----- Merge tag 'spdx-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is a "big" set of SPDX-like patches for 7.2-rc1. It is the addition of the ability for the kernel build process to generate a Software Bill of Materials (SBOM) in the SPDX format, that matches up exactly with just the files that are actually built for the specific kernel image generated. To generate a sbom, after the kernel has been built, just do: make sbom and marvel at the JSON file that is generated... This is needed by users for environments in which a SBOM is required (medical, automotive, anything shipped in the EU, etc.) and cuts down by a massive size the "naive" SBOM solution that many vendors have done by just including _all_ of the kernel files in the resulting document. This result is still a giant JSON file, that I am told parses properly, so we just have to trust that it is properly inclusive as attempting to parse that thing by hand is impossible. The scripts here are self-contained python scripts, no additional libraries or tools to create the SBOM are needed, which is important for many build systems. Overall it's just a bit over 4000 lines of "simple" python code, the most complex part is the regex matching lines, but those are nothing compared to what we maintain in scripts/checkpatch.pl today... The various parts where the tool touches the kbuild subsystem have been acked by the kbuild maintainer, so all should be good here. All of these patches have been in linux-next for weeks with no reported problems" * tag 'spdx-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/sbom: add unit tests for SPDX-License-Identifier parsing scripts/sbom: add unit tests for command parsers scripts/sbom: add SPDX build graph scripts/sbom: add SPDX source graph scripts/sbom: add SPDX output graph scripts/sbom: collect file metadata scripts/sbom: add shared SPDX elements scripts/sbom: add JSON-LD serialization scripts/sbom: add SPDX classes scripts/sbom: add additional dependency sources for cmd graph scripts/sbom: add cmd graph generation scripts/sbom: add command parsers scripts/sbom: setup sbom logging scripts/sbom: integrate script in make process scripts/sbom: add documentation |
||
Mark Brown
|
3287a1881c |
perf bpf: Fix up build failure due to change of btf_vlen() return type
Fix:
util/btf.c: In function '__btf_type__find_member_by_name':
util/btf.c:19:43: error: comparison of integer expressions of different signedness: 'int' and '__u32' {aka 'unsigned int'} [-Werror=sign-compare]
19 | for (i = 0, m = btf_members(t); i < btf_vlen(t); i++, m++) {
| ^
builtin-trace.c: In function 'syscall_arg__strtoul_btf_enum':
builtin-trace.c:967:27: error: comparison of integer expressions of different signedness: 'int' and '__u32' {aka 'unsigned int'} [-Werror=sign-compare]
967 | for (int i = 0; i < btf_vlen(bt); ++i, ++be) {
| ^
by making the variable the same type as the function.
Committer note:
Add an extra hunk from Alan Maguire, fixing btf_enum_scnprintf().
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Linus Torvalds
|
8a500fd093 |
TTY / Serial driver update for 7.2-rc1
Here is the big set of TTY and Serial driver updates for 7.2-rc1. Overall we end up removing more code than added, due to an obsolete synclink_gt driver being removed from the tree, always a nice thing to see happen. Other than that driver removal, major things included in here are: - max310x serial driver updates and fixes - 8250 driver updates and rework in places to make it more "modern" - dts file updates - serial driver core tweaks and updates - vt code cleanups - vc_screen crash fixes - other minor driver updates and cleanups All of these have been in linux-next for well over a week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk2xQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymyewCeKSdE2vNK6LQz9hdev9qBh/J0n7oAn091vfYP i9C0vxEB+sS9vMsRAro5 =14Tn -----END PGP SIGNATURE----- Merge tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 7.2-rc1. Overall we end up removing more code than added, due to an obsolete synclink_gt driver being removed from the tree, always a nice thing to see happen. Other than that driver removal, major things included in here are: - max310x serial driver updates and fixes - 8250 driver updates and rework in places to make it more "modern" - dts file updates - serial driver core tweaks and updates - vt code cleanups - vc_screen crash fixes - other minor driver updates and cleanups All of these have been in linux-next for well over a week with no reported issues" * tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits) serial: 8250_pci: Don't specify conflicting values to pci_device_id members vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width() serial: 8250: fix possible ISR soft lockup dt-bindings: serial: rs485: remove deprecated .txt binding stub serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial tty: serial: Use named initializers for arrays of i2c_device_data serial: 8250_dw: remove clock-notifier infrastructure serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails amba/serial: amba-pl011: Bring back zx29 UART support serial: 8250: Add support for console flow control serial: 8250: Check LSR timeout on console flow control serial: 8250: Set cons_flow on port registration tty: serial: 8250: protect against NULL uart->port.dev in register arm64: dts: add support for A9 based Amlogic BY401 dt-bindings: arm: amlogic: add A311Y3 support serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled serial: qcom-geni: Avoid probing debug console UART without console support serial: max310x: add comments for PLL limits ... |
||
Jakub Kicinski
|
56abdaebbf |
netfilter pull request 26-06-21
-----BEGIN PGP SIGNATURE-----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=GGDL
-----END PGP SIGNATURE-----
Merge tag 'nf-26-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. This batches
fixes for real crashes with trivial/correctness fixes. There is too
a rework of the conntrack expectation timeout strategy to deal with
a possible race when removing an expectation.
1) Fix the incorrect flowtable timeout extension for entries in
hw offload, from Adrian Bente. This is correcting a defect in
the functionality, no crash.
2) Hold reference to device under the fake dst in br_netfilter,
from Haoze Xie. This is fixing a possible UaF if the device
is removed while packet is sitting in nfqueue.
3) Reject template conntrack in xt_cluster, otherwise access to
uninitialize conntrack fields are possible leading to WARN_ON
due to unset layer 3 protocol. From Wyatt Feng.
4) Make sure the IPv6 tunnel header is in the linear skb data
area before pulling. While at it remove incomplete NEXTHDR_DEST
support. From Lorenzo Bianconi. This possibly leading to crash
if IPv4 header is not in the linear area.
5) Use test_bit_acquire in ipset hash set to avoid reordering
of subsequent memory access. This is addressing a LLM related
report, no crash has been observed. From Jozsef Kadlecsik.
6) Use test_bit_acquire in ipset bitmap set too, for the same
reason as in the previous patch, from Jozsef Kadlecsik.
7) Call kfree_rcu() after rcu_assign_pointer() to address a
possible UaF if kfree_rcu() runs inmediately, which to my
understanding never happens. Never observed in practise,
reported by LLM. Also from Jozsef Kadlecsik.
8) Use disable_delayed_work_sync() instead cancel_delayed_work_sync()
to avoid that ipset GC handler re-queues work as reported by LLM.
From Jozsef Kadlecsik. This is for correctness.
9) Restore the check in nft_payload for exceeding payloda offset
over 2^16. From Florian Westphal. This fixes a silent truncation,
not a big deal, but better be assertive and reject it.
10) Validate NFT_META_BRI_IIFHWADDR can only run from bridge
prerouting. From Florian Westphal. Harmless but it could allow
to read bytes from skb->cb.
11) Zero out destination hardware address during the flowtable
path setup, also from Florian. This is a correctness fix, LLM
points that possible infoleak can happen but topology to achieve
it is not clear.
12) Skip IPv4 options if present when building the IPV4 reject reply.
Otherwise bytes in the IPv4 options header can be sent back to
origin where the ICMP header is being expected. Again from
Florian Westphal.
13) Replace timer API for expectation by GC worker approach. This
is implicitly fixing a race between nf_ct_remove_expectations()
which might fail to remove the expectation due to timer_del()
returning false because timer has expired and callback is
being run concurrently. This fix is addressing a crash that has
been already reported with a reproducer.
14) Check if br_vlan_get_pvid_rcu() fails, otherwise possible stack
infoleak of 4-bytes. From Florian Westphal.
* tag 'nf-26-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
netfilter: nf_reject: skip iphdr options when looking for icmp header
netfilter: nft_flow_offload: zero device address for non-ether case
netfilter: nft_meta_bridge: add validate callback for get operations
netfilter: nft_payload: reject offsets exceeding 65535 bytes
netfilter: ipset: make sure gc is properly stopped
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
netfilter: ipset: Don't use test_bit() in lockless RCU readers in bitmap types
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
netfilter: flowtable: fix and simplify IP6IP6 tunnel handling
netfilter: xt_cluster: reject template conntracks in hash match
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
netfilter: flowtable: fix offloaded ct timeout never being extended
====================
Link: https://patch.msgid.link/20260620222738.112506-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
Ahmad Fatoum
|
cf81b26091 |
ASoC: cs530x: Fix expected MCLK rates for CS5302/4/8
When this driver was first added, it accepted rates of 24.56 MHz and 22.572 MHz for the MCLK when PLL bypass is enabled. These rates seem to have no basis in the datasheets and were thus replaced with 45.1584 MHz and 49.152 MHz, respectively, in commit |
||
|
Linus Torvalds
|
1dc18801be |
i2c for v7.2, part 2
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups
in algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCajj5DwAKCRDaeAVmJtMt
brJXAP9XDjeVr3txsLuW3tC/JPvYmJdbuekbs62DSSIanrCMTwEA2jR4Z1QUZRaS
Lwl0axWfbkwRvXzvJW3/CJpg+5mjLQE=
=sRxB
-----END PGP SIGNATURE-----
Merge tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
|
||
|
Linus Torvalds
|
9f333cb6b5 |
I3C for 7.2
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements, hot-join
support, Microchip SAMA7D65 support, fix possible race in IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845
-----BEGIN PGP SIGNATURE-----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=S86N
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there was a lot of work around the mipi-i3c-hci driver
that also led to improvements of the core. We also have support for a
new SoC, the Microchip SAMA7D65. And of course, there are small fixes
for the other controller drivers.
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in
different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements,
hot-join support, Microchip SAMA7D65 support, fix possible race in
IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845"
* tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (45 commits)
i3c: mipi-i3c-hci: Use named initializers for platform_device_id's .driver_data
i3c: master: Use unsigned int for dev_nack_retry_count consistently
i3c: master: Add missing runtime PM get in dev_nack_retry_count_store()
i3c: master: Update dev_nack_retry_count under maintenance lock
i3c: master: Expose the APIs to support I3C hub
i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
i3c: Consistently define pci_device_ids using named initializers
i3c: master: Reconcile dynamic addresses after DAA
i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()
i3c: master: Make i3c_master_add_i3c_dev_locked() return void
i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA
i3c: master: Prevent reuse of dynamic address on device add failure
i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c: mipi-i3c-hci: Add Hot-Join support
i3c: master: Export i3c_master_enec_disec_locked()
i3c: master: Defer new-device registration out of DAA caller context
i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown
...
|
||
Qingshuang Fu
|
37738fdf2a |
irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe and sets up chained
handlers using irq_set_chained_handler_and_data(). However, on driver
removal, the generic chips are not freed and the chained handlers are
not removed.
The generic chips remain on the global gc_list and may later be accessed by
generic interrupt chip suspend, resume, or shutdown callbacks after the
driver has been removed, potentially resulting in a use-after-free and
kernel crash.
The chained handlers that were installed in probe for peripheral and
syswake interrupts are also left dangling, which can lead to spurious
interrupts accessing freed memory.
Fix these issues by:
- Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the
core code automatically removes generic chips when irq_domain_remove()
is called
- Clearing all chained handlers with NULL in pdc_intc_remove()
Fixes:
|
||
Tejun Heo
|
bba2c3615b |
sched_ext: Move sources under kernel/sched/ext/
The sched_ext sources had grown to ten ext* files directly under
kernel/sched/. Move them into a new kernel/sched/ext/ subdirectory and drop
the now-redundant ext_ prefix. ext.c/h keep their names.
kernel/sched/ext.{c,h} -> kernel/sched/ext/ext.{c,h}
kernel/sched/ext_internal.h -> kernel/sched/ext/internal.h
kernel/sched/ext_types.h -> kernel/sched/ext/types.h
kernel/sched/ext_idle.{c,h} -> kernel/sched/ext/idle.{c,h}
kernel/sched/ext_cid.{c,h} -> kernel/sched/ext/cid.{c,h}
kernel/sched/ext_arena.{c,h} -> kernel/sched/ext/arena.{c,h}
The include paths in build_policy.c and sched.h, the MAINTAINERS glob, and a
few documentation and comment references are updated to match. No code or
symbol changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
||
|
Linus Torvalds
|
335c347686 |
slab changes for 7.2 - part 2
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmo5Do0bFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJELvgsHXSRYia4YoH/2jJHnReBhXAo3z9UkQ2
VUT9M+uhwyzmT30DfUPsZ1rtK8Hdw52uVwSUEU0yb90KYioGLv86Zq1LfbEaZ0LX
XpjlEXURFOdenapl4NFRQEv5LAnzMOxJ/m+TX+bnum8jQfWBfKwEeqhw7ZB2pCO6
jDXWYuOqo6mm7D7jTwPNVgjDL/hrk1/f+x9JHwMCuVkJQ1KrT3l7J5rPZEmf8zpQ
bBaCvWJ94e7auXrFprRRz7zGyKOtzweyZM59qpfuQv+LmRASJllpd1l7hBV9HQvA
GyNSsorXsEZrl6mWDbRgXkb1YNE4PmK3g0k2v2k57PFEnt4MNstRF8GJQ7Aa/n6A
f9U=
=aHJl
-----END PGP SIGNATURE-----
Merge tag 'slab-for-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull more slab updates from Vlastimil Babka:
- Introduce and wire up a new alloc_flags parameter for modifying
slab-specific behavior without adding or reusing gfp flags. Also
introduce slab_alloc_context to keep function parameter bloat in
check. Both are similar to what the page allocator does.
kmalloc_flags() exposes alloc_flags for mm-internal users.
- SLAB_ALLOC_NOLOCK flag is used to implement kmalloc_nolock()
behavior without relying on lack of __GFP_RECLAIM, which caused
false positives with workarounds like
|
||
|
Linus Torvalds
|
6e869de3a1 |
hyperv-next for v7.2-rc1
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmo41jgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXjo1CACiN+Ifxj67WZAy1c1tqlHTJbD/OcAh KlbZQCVG3QoV9RC8yc9U2DyzSv488YujrqaJhsRg35Cjqs91dFlaXOemArF9dk8f ICy3SU48sCGvm6v95ndClUyvncAkqcPR/tyfNs7l5rPh6fZnXEov2SdtOlMMayOA HD/s+urd4AiIT3ffj/Ikl/+VrxC7rkYw5oXRF83y4oG79BDtXxgsSlHCudCAM15O FvBeUyTT7/7Phz7jk+oNiNBEtJTq6CQo/2Xp5TBpSBl2F/MjfCudAa/XqJakZO27 UMi5lH8DALYNek4dckyfvt7cVHfeCma0ho77V9AscChFtnAnv74sJyEK =ADO8 -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20260621' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Use wakeup mailbox to boot APs in Hyper-V VTL2 TDX guests (Yunhong Jiang, Ricardo Neri) - Move the Hyper-V IOMMU to its own subdirectory (Mukesh Rathor) - Cosmetic changes to mshv and balloon driver (Junrui Luo, Markus Elfring) * tag 'hyperv-next-signed-20260621' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: mshv: add bounds check on vp_index in mshv_intercept_isr() hv_balloon: Simplify data output in hv_balloon_debug_show() x86/hyperv: Cosmetic changes in irqdomain.c for readability iommu/hyperv: Create hyperv subdirectory under drivers/iommu x86/hyperv/vtl: Use the wakeup mailbox to boot secondary CPUs x86/hyperv/vtl: Mark the wakeup mailbox page as private x86/acpi: Add a helper to get the address of the wakeup mailbox x86/hyperv/vtl: Setup the 64-bit trampoline for TDX guests x86/realmode: Make the location of the trampoline configurable x86/hyperv/vtl: Set real_mode_header in hv_vtl_init_platform() x86/dt: Parse the Wakeup Mailbox for Intel processors dt-bindings: reserved-memory: Wakeup Mailbox for Intel processors x86/acpi: Add functions to setup and access the wakeup mailbox x86/topology: Add missing struct declaration and attribute dependency |
||
|
Linus Torvalds
|
2580f89860 |
more s390 updates for 7.2 merge window
- consolidate s390 idle time accounting by moving all CPU time tracking to the architecture backend and eliminate the mix of architecture- specific and common code accounting - Add missing EXPORT_SYMBOL_GPL() to kcpustat_field_idle() and kcpustat_field_iowait() functions - Finalize ptep_get() conversion by replacing direct page table entry dereferencing with proper accessors (ptep_get(), pmdp_get(), etc.) - Explicitly check the buffer length in PKEY_VERIFYPROTK ioctl and pkey_pckmo implementations and fail if the length is exceeded -----BEGIN PGP SIGNATURE----- iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCajlD5xccYWdvcmRlZXZA bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8K6cAP48oh4X6XLdK3Eohkm9WjkI0mxZ Qh/tkI1o1GcckwU/zAD+O0LKfJIcb4mo0cH7FgTOJTUCbmPBX711zjom2t9Bvww= =BTXg -----END PGP SIGNATURE----- Merge tag 's390-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - consolidate s390 idle time accounting by moving all CPU time tracking to the architecture backend and eliminate the mix of architecture- specific and common code accounting - Add missing EXPORT_SYMBOL_GPL() to kcpustat_field_idle() and kcpustat_field_iowait() functions - Finalize ptep_get() conversion by replacing direct page table entry dereferencing with proper accessors (ptep_get(), pmdp_get(), etc.) - Explicitly check the buffer length in PKEY_VERIFYPROTK ioctl and pkey_pckmo implementations and fail if the length is exceeded * tag 's390-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pkey: Check length in pkey_pckmo handler implementation s390/pkey: Check length in PKEY_VERIFYPROTK ioctl s390/idle: Add missing EXPORT_SYMBOL_GPL() s390/mm: Complete ptep_get() conversion s390/idle: Remove idle time and count sysfs files s390/idle: Provide arch specific kcpustat_field_idle()/kcpustat_field_iowait() s390/irq/idle: Use stcke instead of stckf for time stamps s390/timex: Move union tod_clock type to separate header |
||
Thomas Gleixner
|
b81dde13cc |
debugobjects: Plug race against a concurrent OOM disable
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places.
Fixes:
|