After commit 059b7dbd20 ("vsock/virtio: fix potential unbounded skb
queue"), virtio_transport_inc_rx_pkt() subtracts per-skb overhead from
buf_alloc when checking whether a new packet fits. This reduces the
effective receive buffer below what the user configured via
SO_VM_SOCKETS_BUFFER_SIZE, causing legitimate data packets to be
silently dropped and applications that rely on the full buffer size
to deadlock.
Also, the reduced space is not communicated to the remote peer, so
its credit calculation accounts more credit than the receiver will
actually accept, causing data loss (there is no retransmission).
With this approach we currently have failures in
tools/testing/vsock/vsock_test.c. Test 18 sometimes fails, while
test 22 always fails in this way:
18 - SOCK_STREAM MSG_ZEROCOPY...hash mismatch
22 - SOCK_STREAM virtio credit update + SO_RCVLOWAT...send failed:
Resource temporarily unavailable
Fix by allowing at most `buf_alloc * 2` as the total budget for payload
plus skb overhead in virtio_transport_inc_rx_pkt(), similar to how
SO_RCVBUF is doubled to reserve space for sk_buff metadata.
This preserves the full buf_alloc for payload under normal operation,
while still bounding the skb queue growth.
With this patch, all tests in tools/testing/vsock/vsock_test.c are
now passing again.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When there is no more space to queue an incoming packet, the packet is
silently dropped. This causes data loss without any notification to
either peer, since there is no retransmission.
Under normal circumstances, this should never happen. However, it could
happen if the other peer doesn't respect the credit, or if the skb
overhead, which we recently began to take into account with commit
059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue"),
is too high.
Fix this by resetting the connection and setting the local socket error
to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a
packet, so both peers are explicitly notified of the failure rather than
silently losing data.
Fixes: ae6fcfbf5f ("vsock/virtio: discard packets if credit is not respected")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If a kcontrol update comes to a control right at the same time when the
PCM containing the control is started up then there is a small window when
a race can happen:
while the widget is set up the swidget->setup_mutex is taken in topology
level and if the control update comes at this point, it will be stopped
within sof_ipc4_set_get_kcontrol_data() with the mutex and it will be
blocked until the swidget setup is done, which will clear the control's
IPC message payload.
To avoid such race, use local copy of the template IPC message instead of
the template directly. This will ensure data integrity in case of
concurrent updates during initialization.
Link: https://github.com/thesofproject/linux/issues/5734
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520141349.9625-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Fang says:
====================
Add preliminary NETC switch support for i.MX94
i.MX94 NETC (v4.3) integrates 802.1Q Ethernet switch functionality, the
switch provides advanced QoS with 8 traffic classes and a full range of
TSN standards capabilities. It has 3 user ports and 1 CPU port, and the
CPU port is connected to an internal ENETC through the pseduo link, so
instead of a back-to-back MAC, the lightweight "pseudo MAC" is used at
both ends of the pseudo link to transfer Ethernet frames. The pseudo
link provides a zero-copy interface (no serialization delay) and lower
power (less logic and memory).
Like most Ethernet switches, the NETC switch also supports a proprietary
switch tag, is used to carry in-band metadata information about frames.
This in-band metadata information can include the source port from which
the frame was received, what was the reason why this frame got forwarded
to the entity, and for the entity to indicate the precise destination
port of a frame. The NETC switch tag is added to frames after the source
MAC address. There are three types of switch tags, and each type has 1
to 4 subtypes, more details are as follows.
Forward switch tag (Type = 0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port switch tag (Type = 1): Represents frames that are to be sent to
a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host switch tag (Type = 2): Represents frames redirected or copied to
the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
Currently, this patch set supports Forward tag, SubType 0 of To_Port tag
and SubType 0 of To_Host tag. More tags will be supported in the future.
In addition, the switch supports NETC Table Management Protocol (NTMP),
some switch functionality is controlled using control messages sent to
the hardware using BD ring interface with 32B descriptors similar to the
packet Transmit BD ring used on ENETC. This interface is referred to as
the command BD ring. This is used to configure functionality where the
underlying resources may be shared between different entities or being
too large to configure using direct registers.
For this patch set, we have supported the following tables through the
command BD ring interface.
FDB Table: It contains forwarding and/or filtering information about MAC
addresses. The FDB table is used for MAC learning lookups and MAC
forwarding lookups.
VLAN Filter Table: It contains configuration and control information for
each VLAN configured on the switch.
Buffer Pool Table: It contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. Currently, we use
this table to implement flow control feature on each port.
Ingress Port Filter Table: It contains a set of filters each capable of
classifying incoming traffic using a mix of L2, L3, and L4 parsed and
arbitrary field data. We use this table to implement host flood support
to the switch port.
The switch also supports other tables, and we will add more advanced
features through them in the future.
====================
Link: https://patch.msgid.link/20260518082506.1318236-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the ethtool private statistics interface to expose additional
port-level and MAC-level counters that are not covered by the standard
IEEE 802.3 statistics. The pMAC counters are only reported when the port
supports Frame Preemption (802.1Qbu/802.3br).
Note that although rtnl_link_stats64 provides some standard statistics
such as rx octets, rx frame errors, rx dropped packets, and tx packets,
these are overall port statistics. The NETC switch supports preemption
on each port, and each port has two MACs (eMAC and pMAC). The driver
private statistics are used to obtain statistics for each MAC, allowing
users to perform analysis and debugging.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-16-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool is a quantity of memory available for buffering a group
of flows (e.g. frames having the same priority, frames received from the
same port), while waiting to be transmitted on a port. The buffer pool
tracks internal memory consumption with upper bound limits and optionally
a non-shared portion when associated with a shared buffer pool. Currently
the shared buffer pool is not supported, it will be added in the future.
For i.MX94, the switch has 4 ports and 8 buffer pools, so each port is
allocated two buffer pools. For frames with priorities of 0 to 3, they
will be mapped to the first buffer pool; For frames with priorities of
4 to 7, they will be mapped to the second buffer pool. Each buffer pool
has a flow control on threshold and a flow control off threshold. By
setting these threshold, add the flow control support to each port.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-14-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Expand the NETC switch driver with several foundational features:
- FDB and MDB management
- STP state handling
- MTU configuration
- Port setup/teardown
- Host flooding support
At this stage, the driver operates only in standalone port mode. Each
port uses VLAN 0 as its PVID, meaning ingress frames are internally
assigned VID 0 regardless of whether they arrive tagged or untagged.
Note that this does not inject a VLAN 0 header into the frame, the VID
is used purely for subsequent VLAN processing within the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-13-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Different versions of NETC switches have different numbers of ports and
MAC capabilities. Add .phylink_get_caps() to struct netc_switch_info,
allowing each NETC switch version to implement its own callback for
obtaining MAC capabilities.
Implement the phylink_mac_ops callbacks: .mac_config(), .mac_link_up(),
and .mac_link_down(). Note that flow-control configuration is not yet
supported in .mac_link_up(), but will be implemented in a subsequent
patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260518082506.1318236-12-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For i.MX94 series, the NETC IP provides full 802.1Q Ethernet switch
functionality, advanced QoS with 8 traffic classes, and a full range of
TSN standards capabilities. The switch has 3 user ports and 1 CPU port,
the CPU port is connected to an internal ENETC. Since the switch and the
internal ENETC are fully integrated within the NETC IP, no back-to-back
MAC connection is required. Instead, a light-weight "pseudo MAC" is used
between the switch and the ENETC. This translates to lower power (less
logic and memory) and lower delay (as there is no serialization delay
across this link).
Introduce the initial NETC switch driver with basic probe and remove
functionality. More features will be added in subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-11-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All the tables of NETC switch are managed through the command BD ring,
but unlike ENETC, the switch has two command BD rings, if the current
ring is busy, the switch driver can switch to another ring to manage
the table. Currently, the NTMP driver does not support multiple rings.
Therefore, update ntmp_select_and_lock_cbdr() to select a appropriate
ring to execute the command for the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-9-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before probing the NETC switch driver, some pre-initialization needs to
be set in NETCMIX and IERB to ensure that the switch can work properly.
For example, i.MX94 NETC switch has three external ports and each port
is bound to a link. And each link needs to be configured so that it can
work properly, such as I/O variant and MII protocol.
In addition, the switch port 2 (MAC 2) and ENETC 0 (MAC 3) share the same
parallel interface, they cannot be used at the same time due to the SoC
constraint. And the MAC selection is controlled by the mac2_mac3_sel bit
of EXT_PIN_CONTROL register. Currently, the interface is set for ENETC 0
by default unless the switch port 2 is enabled in the DT node.
Like ENETC, each external port of the NETC switch can manage its external
PHY through its port MDIO registers. And the port can only access its own
external PHY by setting the PHY address to the LaBCR[MDIO_PHYAD_PRTAD].
If the accessed PHY address is not equal to LaBCR[MDIO_PHYAD_PRTAD], then
the MDIO access initiated by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add bindings for NETC switch. This switch is a PCIe function of NETC IP,
it supports advanced QoS with 8 traffic classes and 4 drop resilience
levels, and a full range of TSN standards capabilities. The switch CPU
port connects to an internal ENETC port, which is also a PCIe function
of NETC IP. So these two ports use a light-weight "pseudo MAC" instead
of a back-to-back MAC, because the "pseudo MAC" provides the delineation
between switch and ENETC, this translates to lower power (less logic and
memory) and lower delay (as there is no serialization delay across this
link).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518082506.1318236-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current description indicates that the 'dsa,member' property cannot
be set for a switch that is not part of any cluster. Vladimir thinks
that this is a case where the actual technical limitation was poorly
transposed into words when this restriction was first documented, in
commit 8c5ad1d617 ("net: dsa: Document new binding").
The true technical limitation is that many DSA tagging protocols are
topology-unaware, and always call dsa_conduit_find_user() with a
switch_id of 0. Specifying a custom "dsa,member" property with a
non-zero switch_id would break them.
Therefore, for topology-aware switches, it is fine to specify this
property for them, even if they are not part of any cluster. Our NETC
switch is a good example which is topology-aware, the switch_id is
carried in the switch tag, but the switch_id 0 is reserved for VEPA
switch and cannot be used, so we need to use this property to assign
a non-zero switch_id for it.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518082506.1318236-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing.
Fixes: eab231c039 ("staging: most: v4l2-aim: remove unnecessary label err_vbi_dev")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260517111218.945796-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the CamelCase variable 'Bpp' to 'bpp' in both the header
and implementation files to comply with Linux kernel coding style.
Issue found by checkpatch.
Signed-off-by: Rupesh Majhi <zoone.rupert@gmail.com>
Link: https://patch.msgid.link/20260517131918.197943-1-zoone.rupert@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This switch statement doesn't do anything in all of its branches. As
such we can clean it up, and only keep the assignment in the else block.
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260517044330.8517-1-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'g_noaccel', 'g_nomtrr' and 'g_dualview' variables are initialized
only during the init phase in the 'lynxfb_setup' function and never
changed. So, mark them as __ro_after_init.
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://patch.msgid.link/20260516142326.36018-1-len.bao@gmx.us
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate errno values from rtl8723bs_hal_xmitframe_enqueue()
through rtw_hal_xmitframe_enqueue() by returning the error code
directly.
Update rtw_hal_xmit() to explicitly map the boolean return
value of rtl8723bs_hal_xmit() to _SUCCESS/_FAIL, clarifying
the return semantics at the HAL boundary.
None of the callers of rtw_hal_xmitframe_enqueue() check the
return value, so they do not need to be updated. This change
does not affect runtime behavior.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260514100708.25031-6-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate errno values from rtw_xmit_classifier() through
rtw_xmitframe_enqueue(), and update the local enqueue caller
to check for non-zero return values.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260514100708.25031-5-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert rtw_xmit_classifier() to return 0 on success and
negative error codes on failure.
Update the caller to check for non-zero return values and
preserve the existing _FAIL/_SUCCESS semantics.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260514100708.25031-4-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtw_xmit_classifier() function is only used within
rtw_xmit.c. Move it above its caller and make it static to
limit its scope.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260514100708.25031-3-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify rtw_xmit_classifier() by removing the exit label and
using direct returns for error handling.
No functional change.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260514100708.25031-2-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the private helper _rtw_enqueue_cmd() to return 0 on
success instead of the legacy _SUCCESS value.
Keep rtw_enqueue_cmd() translating the result back to the
existing return convention for now.
No functional change intended.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260513213719.12246-5-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the goto exit pattern with direct returns to simplify
the control flow and improve readability.
No functional change intended.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260513213719.12246-4-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function _rtw_enqueue_cmd() is only used within rtw_cmd.c,
so make it static and remove the unnecessary declaration from
the header file.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260513213719.12246-3-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the goto exit pattern with a direct return to simplify
the control flow and improve readability.
No functional change intended.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Link: https://patch.msgid.link/20260513213719.12246-2-dennylin0707@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines in more hal/ files.
This fixes the following checkpatch.pl check:
CHECK: Please don't use multiple blank lines
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260515175140.7439-1-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the TXDESC_64_BYTES code since it is not used as the macro
is not defined anywhere.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260515151253.8106-3-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code since it is
not used as the macros are not defined anywhere.
Signed-off-by: Andrei Khomenkov <khomenkov@mailbox.org>
Link: https://patch.msgid.link/20260515151253.8106-2-khomenkov@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines in hal/Hal* source and header
files.
This fixes the following checkpatch.pl check:
CHECK: Please don't use multiple blank lines
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260514180642.4608-1-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove multiple consecutive blank lines in hal/hal_* and hal/sdio_*
files.
This fixes the following checkpatch.pl check:
CHECK: Please don't use multiple blank lines
Signed-off-by: Jennifer Guo <guojy.bj@gmail.com>
Link: https://patch.msgid.link/20260513212747.50900-1-guojy.bj@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a blank line between the WIFI_UNDER_WPS block and the
wifi_spec block to improve readability.
Signed-off-by: Salman Alghamdi <me@cipherat.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260513203611.31872-7-me@cipherat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inline rtw_sitesurvey_cmd() directly in the if condition to reduce
line length.
Signed-off-by: Salman Alghamdi <me@cipherat.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260513203611.31872-3-me@cipherat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove `data = 0` initialization since the variable is reset each
time in the for loop.
Signed-off-by: Ahmet Sezgin Duran <ahmet@sezginduran.net>
Link: https://patch.msgid.link/20260512164124.188210-4-ahmet@sezginduran.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Invert the frequency validation conditions and use early returns
to reduce nesting and improve readability.
No functional changes.
Signed-off-by: Ahmet Sezgin Duran <ahmet@sezginduran.net>
Link: https://patch.msgid.link/20260512164124.188210-3-ahmet@sezginduran.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused header file includes from multiple source files to
declutter the include sections.
Also remove the unused CONFIG_MTRR include block after verifying
that no MTRR interfaces are used by the driver.
No functional changes.
Signed-off-by: Ahmet Sezgin Duran <ahmet@sezginduran.net>
Link: https://patch.msgid.link/20260512164124.188210-2-ahmet@sezginduran.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cedrus_probe() initializes the media device before registering the video
device, the media controller, and the media device. If any of those later
steps fails, probe returns without calling media_device_cleanup(), so the
media device internals initialized by media_device_init() are left behind.
Add a media-device cleanup label to the probe unwind path and route video
registration failures through it as well.
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Cc: stable@vger.kernel.org
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for the RGA3 unit contained in the RK3588.
Only a basic feature set consisting of scaling and color conversion is
implemented. Currently unimplemented features include:
- Advanced formats like 10bit YUV, FBCE mode and Tile8x8 mode
- Background color (V4L2_CID_BG_COLOR)
- Configurable alpha value (V4L2_CID_ALPHA_COMPONENT)
- Image flipping (V4L2_CID_HFLIP and V4L2_CID_VFLIP)
- Image rotation (V4L2_CID_ROTATE)
- Image cropping/composing (VIDIOC_S_SELECTION)
- Only very basic output cropping for 1088 -> 1080 cases is implemented
The register address defines were copied from the
vendor Rockchip kernel sources and slightly adjusted to not start at 0
again for the cmd registers.
During testing it has been noted that the scaling of the hardware is
slightly incorrect. A test conversion of 128x128 RGBA to 256x256 RGBA
causes a slightly larger scaling. The scaling is suddle, as it seems
that the image is scaled to a 2px larger version and then cropped to
it's final size. Trying to use the RGA2 scaling factor calculation
didn't work. As the calculation matches the vendor kernel driver, no
further research has been utilized to check if there may be some kind of
better scaling factor calculation.
Furthermore comparing the RGA3 conversion with the GStreamer
videoconvertscale element, the chroma-site is different. A quick testing
didn't reveal a chroma-site that creates the same image with the
GStreamer Element. Also when converting from YUV to RGB the RGB values
differ by 1 or 2. This doesn't seem to be a colorspace conversion issue
but rather a slightly different precision on the calculation.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Disable multi-core support in preparation of the RGA3 addition. The
RK3588 SoC features two equal RGA3 cores. This allows scheduling of the
work between both cores, which is not yet implemented. Until it is
implemented avoid exposing both cores as independent video devices to
prevent an ABI breakage when multi-core support is added.
This patch is copied from the Hantro driver patch to disable multi core
support by Sebastian Reichel. See
commit ccdeb8d57f ("media: hantro: Disable multicore support")
Link: https://lore.kernel.org/all/20240618183816.77597-4-sebastian.reichel@collabora.com/
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
