commit bb88e8da00 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site.
Fixes: bb88e8da00 ("erofs: use meta buffers for xattr operations")
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Fixes: bb88e8da00 ("erofs: use meta buffers for xattr operations")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
After unaligned compressed extents were introduced, the following race
could occur:
[Thread 1] [Thread 2]
(z_erofs_fill_bio_vec)
<handle a Z_EROFS_PREALLOCATED_FOLIO folio>
...
filemap_add_folio (1)
(z_erofs_bind_cache)
<the same folio is found..>
..
..
folio_attach_private (2)
filemap_add_folio (3) again
Since (1) is executed but (2) hasn't been executed yet, it's possible
that another thread finds the same managed folio in z_erofs_bind_cache()
for a different pcluster and calls filemap_add_folio() again since
folio->private is still Z_EROFS_PREALLOCATED_FOLIO.
Fix this by explicitly clearing folio->private before making the folio
visible in the managed cache so that another pcluster can simply wait
on the locked managed folio as what we did for other shared cases [1].
This only impacts unaligned data compression (`-E48bit` with zstd,
for example).
[1] Commit 9e2f9d34dd ("erofs: handle overlapped pclusters out of
crafted images properly") was originally introduced to handle crafted
overlapped extents, but it addresses unaligned extents as well.
Fixes: 7361d1e376 ("erofs: support unaligned encoded data")
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/r/4a2f3801-fac1-42fe-ae75-da315822e088@salutedevices.com
Tested-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
params_from_user() may acquire tee_shm references for MEMREF parameters
before failing after partially processing the supplied parameter array.
In tee_ioctl_supp_recv(), those references are currently not released on
that error path.
Fix this by freeing MEMREF references before returning when
params_from_user() fails.
Keep the final cleanup path in tee_ioctl_supp_recv() unchanged since
supp_recv() may consume and replace the supplied parameters, unlike the
other TEE ioctl callback paths.
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
register_shm_helper() allocates shm before calling
iov_iter_npages(). If iov_iter_npages() returns 0, the function
jumps to err_ctx_put and leaks shm.
This can be triggered by TEE_IOC_SHM_REGISTER with
struct tee_ioctl_shm_register_data where length is 0.
Jump to err_free_shm instead.
Fixes: 7bdee41575 ("tee: Use iov_iter to better support shared buffer registration")
Cc: stable@vger.kernel.org
Cc: lvc-project@linuxtesting.org
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The tee_ioctl_object_invoke_arg structure has padding on some
architectures but not on x86-32 and a few others:
include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded]
I expect that all current users of this are on architectures that do
have implicit padding here (arm64, arm, x86, riscv), so make the padding
explicit in order to avoid surprises if this later gets used elsewhere.
Fixes: d5b8b0fa17 ("tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
scarlett2_hwdep_write() rejects writes when offset + count is greater than
or equal to the selected flash segment size. That incorrectly treats a
write ending exactly at the end of the segment as out of space, although
the last byte written is still within the segment.
Split invalid argument checks from the segment-space check, keep
zero-length writes as no-ops, and compare count against the remaining
segment size. This permits exact-end writes and avoids relying on
offset + count before deciding whether the request is in bounds.
Fixes: 1abfbd3c95 ("ALSA: scarlett2: Add support for uploading new firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-alsa-scarlett2-flash-write-boundary-v1-1-b550480e92da@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the HP ProBook 440 G6, the HP ProBook 430 G6 needs
the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk for its
mute and microphone mute LEDs.
Tested on a HP ProBook 430 G6.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Link: https://patch.msgid.link/20260519140248.4211-2-mail@mariushoch.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pending irq work might be still floating while the assigned stream
has been already closed, which may lead to UAF, especially when
another async work for fasync is involved.
For addressing this, extend the hda_controller_ops for allowing the
extra cleanup procedure that is specific to the controller driver, and
make sure to cancel and sync the pending irq work at each PCM close
before releasing the resources.
Reported-by: Jake Lamberson <lamberson.jake@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-2-tiwai@suse.de
Currently, the delayed IRQ handling for PCM streams is managed in a
single work embedded in hda_intel, but this is basically a per-stream
thing. Due to the single work, we can't cancel the work properly at
closing each stream, for example.
For making the IRQ pending work to be stream-based, this patch changes
the following:
- An extended version of azx_dev (i.e. the hd-audio stream object) is
defined for snd-hda-intel
- The irq_pending flag and irq_pending_work are moved to
hda_intel_stream, so that they can be hda-intel stream specific
- The stream creation and assignment are refactored so that
snd-hda-intel can handle individually;
the snd-hda-intel specific workaround for stream tags is also moved
to snd-hda-intel itself instead of the common code
- The irq pending work is canceled properly at free / shutdown
While we're at it, changed the bit field flag to bool, as the bit
field doesn't help much in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-1-tiwai@suse.de
The current ALSA sequencer core tries to register the new kernel
sequencer port on the list at first, then fill up the port
information. This means that user-space may sneak the wrong
information before the actual data is filled, which isn't ideal.
Although the user-space should try to query the port info after the
port registration notification is sent out, it'd be still better to
have a port available with the full info from the beginning.
This patch changes the sequencer port creation and registration
procedure; now split to two steps, for creation and insertion, and the
port is registered after the information is filled.
Link: https://sashiko.dev/#/patchset/20260518194023.1667857-1-maoyixie.tju%40gmail.com
Link: https://patch.msgid.link/20260519094254.465041-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20260519150819.1591409-2-u.kleine-koenig@baylibre.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
__bpf_dynptr_data() can return NULL (FILE dynptrs, any non-contiguous
backing). bpf_verify_pkcs7_signature() forwards the pointer to
verify_pkcs7_signature() unchecked, causing a NULL deref in
asn1_ber_decoder() reachable from a sleepable BPF LSM at lsm.s/bpf.
NULL-check both pointers and reject with -EINVAL. Mirrors the guards
already in kernel/bpf/crypto.c.
Fixes: 865b0566d8 ("bpf: Add bpf_verify_pkcs7_signature() kfunc")
Reported-by: Xianrui Dong <dongxianrui1@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260520024059.313468-1-kpsingh@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Adreno and MDSS drivers need to know whether to enable AMSBC. Add
separate helper, describing that feature.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define special helper returning version setting for MDSS and A8xx
drivers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-3-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the comment for the macrotile_mode and introduce separate
revision for UBWC 3.0 + 8-channel macrotiling mode. It is not used by
the database (since the drivers are not yet changed to handle it yet).
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-2-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix a typo and a redundant phrase in the block comment above
__sys_accept4(): "thats" -> "that's", and drop the trailing
"to recvmsg" that repeats the recvmsg() reference earlier in
the same sentence.
No functional change.
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://patch.msgid.link/20260516101109.479042-1-avinash.duduskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash.
Fixes: bc90fbe0c3 ("pds_core: Rework teardown/setup flow to be more common")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an internal review from Airoha, it was notice that the RX DMA descriptor
bits and mask are wrong. These values probably refer to an old NPU firmware
never published. The previous value works correctly but it was reported
that in some specific condition in mixed scenario with both Ethernet and
WiFi offload it's possible that RX DMA descriptor signal wrong value with
the problem to the RX ring or packets getting dropped.
To handle these specific scenario, apply the new suggested bits mask from
Airoha.
Correct functionality of both AN7581 NPU and MT7996 variant were verified
and confirmed working.
Fixes: a7fc8c641c ("net: airoha: Fix npu rx DMA definitions")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260518134530.3683-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71b ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c6248 ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5.
Fixes: 2b514574f7 ("net: af_unix: implement splice for stream af_unix sockets")
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518-b4-unix-recv-wait-hotfix-v2-1-83e29ce8ad31@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolai Buchwitz says:
====================
net: phy: honor eee_disabled_modes when advertising EEE
While debugging why ethtool --show-eee reports "not supported" on a
Raspberry Pi CM4 with eee-broken-1000t / eee-broken-100tx set on the
PHY node, I noticed two phylib helpers copy phydev->supported_eee
into phydev->advertising_eee without applying
phydev->eee_disabled_modes: phy_support_eee() and
phy_advertise_eee_all(). That undoes the filtering phy_probe() set
up after of_set_phy_eee_broken(), so the PHY ends up advertising EEE
for modes that were marked broken in DT (or by the driver via
eee_disabled_modes).
The visible effect on MAC drivers that call phy_support_eee() after
probe (bcmgenet, fec, lan743x, lan78xx, r8169) is that ethtool on the
local interface reports "not supported" (because supported is masked
by eee_disabled_modes and ends up empty), while the link partner
happily sees EEE negotiated and active.
Patch 1 fixes phy_support_eee(). Patch 2 fixes phy_advertise_eee_all(),
which is also reached from genphy_c45_ethtool_set_eee() when user
space passes an empty advertisement.
I went through the other users of supported_eee as suggested by Andrew
and they look fine:
- phy_probe() already masks via eee_disabled_modes after
of_set_phy_eee_broken().
- genphy_c45_ethtool_get_eee() masks supported_eee with
eee_disabled_modes when reporting to user space.
- genphy_c45_ethtool_set_eee() masks user-supplied adv against
eee_disabled_modes, and the empty-adv path is now covered by
patch 2.
- genphy_c45_read_eee_abilities(), read_eee_cap1/cap2 populate
supported_eee from PHY registers (source of truth).
- genphy_c45_read_eee_adv(), read_eee_lpa() and write_eee_adv() use
supported_eee only to gate which MMD registers to access, not to
construct an advertisement.
====================
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-0-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_advertise_eee_all() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. genphy_c45_ethtool_set_eee() calls this helper
when user space passes an empty advertisement, undoing the filtering.
Apply the same eee_disabled_modes mask in phy_advertise_eee_all() so
the filtering survives the copy, matching the pattern in phy_probe()
and phy_support_eee().
Fixes: b64691274f ("net: phy: add helper phy_advertise_eee_all")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-2-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_support_eee() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. MAC drivers that call phy_support_eee() after
probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY
to advertise EEE for modes the user marked as broken.
The symptom is that ethtool --show-eee on the local interface reports
"not supported" (supported & ~eee_disabled_modes is empty) while the
link partner sees EEE negotiated and active.
phy_probe() already filters advertising_eee via eee_disabled_modes
after calling of_set_phy_eee_broken(). Apply the same mask in
phy_support_eee() so the filtering survives the copy.
Fixes: 49168d1980 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-1-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genphy_c45_an_config_eee_aneg() writes the EEE advertisement to the
auto-negotiation device's MMD register space (MDIO_MMD_AN, register
MDIO_AN_EEE_ADV). These registers are read by the link partner only
during auto-negotiation, so writing them while autoneg is disabled
cannot influence the link. On some PHYs (e.g. Broadcom BCM54213PE)
the write nevertheless reaches the chip and disturbs the receive
datapath.
Concretely, running
ethtool -s eth0 speed 100 duplex full autoneg off
ethtool --set-eee eth0 eee off
leaves eth0 with TX working and RX completely silent on a
Raspberry Pi 4 / CM4 board (bcmgenet + BCM54213PE in rgmii-rxid).
Switching back to autoneg recovers the link.
Prior to commit f26a29a038 ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled"),
the disable path was effectively a no-op because the helper read
the stale eee_cfg.eee_enabled, so the underlying PHY behavior never
surfaced.
Bisected on rpi-6.12.y between commits 83943264 (good) and
effcbc88 (bad) to f26a29a038.
Fixes: f26a29a038 ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260516150251.879680-1-nerijus.bendziunas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump_class_stats() and htb_offload_aggregate_stats()
call gnet_stats_basic_sync_init(&cl->bstats) which
is wrong on 32bit arches when syncp is cleared.
Make sure to acquire qdisc spinlock and use
_bstats_set() to ease future lockless dumps.
Fixes: 8327158624 ("sch_htb: Stats for offloaded HTB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518090518.629245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the generic IRQ entry/exit infrastructure on PowerPC by selecting
GENERIC_ENTRY and integrating the architecture-specific interrupt and
syscall handlers with the generic entry/exit APIs.
This change replaces PowerPC’s local interrupt entry/exit handling with
calls to the generic irqentry_* helpers, aligning the architecture with
the common kernel entry model. The macros that define interrupt, async,
and NMI handlers are updated to use irqentry_enter()/irqentry_exit()
and irqentry_nmi_enter()/irqentry_nmi_exit() where applicable also
convert the PowerPC syscall entry and exit paths to use the generic
entry/exit framework and integrating with the common syscall handling
routines.
Key updates include:
- The architecture now selects GENERIC_ENTRY in Kconfig.
- Replace interrupt_enter/exit_prepare() with arch_interrupt_* helpers.
- Integrate irqentry_enter()/exit() in standard and async interrupt paths.
- Integrate irqentry_nmi_enter()/exit() in NMI handlers.
- Remove redundant irq_enter()/irq_exit() calls now handled generically.
- Use irqentry_exit_cond_resched() for preemption checks.
- interrupt.c and syscall.c are simplified to delegate context
management and user exit handling to the generic entry path.
- The new pt_regs field `exit_flags` introduced earlier is now used
to carry per-syscall exit state flags (e.g. _TIF_RESTOREALL).
- Remove unused code.
This change establishes the necessary wiring for PowerPC to use the
generic IRQ entry/exit framework while maintaining existing semantics.
This aligns PowerPC with the common entry code used by other
architectures and reduces duplicated logic around syscall tracing,
context tracking, and signal handling.
The performance benchmarks from perf bench basic syscall are below:
perf bench syscall usec/op (-ve is improvement)
| Syscall | Base | test | change % |
| ------- | ----------- | ----------- | -------- |
| basic | 0.093543 | 0.093023 | -0.56 |
| execve | 446.557781 | 450.107172 | +0.79 |
| fork | 1142.204391 | 1156.377214 | +1.24 |
| getpgid | 0.097666 | 0.092677 | -5.11 |
perf bench syscall ops/sec (+ve is improvement)
| Syscall | Base | New | change % |
| ------- | -------- | -------- | -------- |
| basic | 10690548 | 10750140 | +0.56 |
| execve | 2239 | 2221 | -0.80 |
| fork | 875 | 864 | -1.26 |
| getpgid | 10239026 | 10790324 | +5.38 |
IPI latency benchmark (-ve is improvement)
| Metric | Base (ns) | New (ns) | % Change |
| -------------- | ------------- | ------------- | -------- |
| Dry run | 583136.56 | 584136.35 | 0.17% |
| Self IPI | 4167393.42 | 4149093.90 | -0.44% |
| Normal IPI | 61769347.82 | 61753728.39 | -0.03% |
| Broadcast IPI | 2235584825.02 | 2227521401.45 | -0.36% |
| Broadcast lock | 2164964433.31 | 2125658641.76 | -1.82% |
Thats very close to performance earlier with arch specific handling.
Signed-off-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-8-mkchauras@gmail.com
Move interrupt entry and exit helper routines from interrupt.h into the
PowerPC-specific entry-common.h header as a preparatory step for enabling
the generic entry/exit framework.
This consolidation places all PowerPC interrupt entry/exit handling in a
single common header, aligning with the generic entry infrastructure.
The helpers provide architecture-specific handling for interrupt and NMI
entry/exit sequences, including:
- arch_interrupt_enter/exit_prepare()
- arch_interrupt_async_enter/exit_prepare()
- arch_interrupt_nmi_enter/exit_prepare()
- Supporting helpers such as nap_adjust_return(), check_return_regs_valid(),
debug register maintenance, and soft mask handling.
The functions are copied verbatim from interrupt.h.Subsequent patches will
integrate these routines into the generic entry/exit flow.
No functional change intended.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-7-mkchauras@gmail.com
Add a new field `exit_flags` in the pt_regs structure. This field will hold
the flags set during interrupt or syscall execution that are required during
exit to user mode.
Specifically, the `TIF_RESTOREALL` flag, stored in this field, helps the
exit routine determine if any NVGPRs were modified and need to be restored
before returning to userspace.
This addition ensures a clean and architecture-specific mechanism to track
per-syscall or per-interrupt state transitions related to register restore.
Changes:
- Add `exit_flags` and `__pt_regs_pad` to maintain 16-byte stack alignment
- Update asm-offsets.c and ptrace.c for offset and validation
- Update PT_* constants in uapi header to reflect the new layout
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-6-mkchauras@gmail.com
Add PowerPC-specific implementations of the generic syscall exit hooks
used by the generic entry/exit framework:
- arch_exit_to_user_mode_work_prepare()
- arch_exit_to_user_mode_work()
These helpers handle user state restoration when returning from the
kernel to userspace, including FPU/VMX/VSX state, transactional memory,
KUAP restore, and per-CPU accounting.
Additionally, move check_return_regs_valid() from interrupt.c to
interrupt.h so it can be shared by the new entry/exit logic.
No functional change is intended with this patch.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-5-mkchauras@gmail.com
Implement the arch_enter_from_user_mode() hook required by the generic
entry/exit framework. This helper prepares the CPU state when entering
the kernel from userspace, ensuring correct handling of KUAP/KUEP,
transactional memory, and debug register state.
This patch contains no functional changes, it is purely preparatory for
enabling the generic syscall and interrupt entry path on PowerPC.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-4-mkchauras@gmail.com
This patch introduces preparatory changes needed to support building
PowerPC with the generic entry/exit (irqentry) framework.
The following infrastructure updates are added:
- Add a syscall_work field to struct thread_info to hold SYSCALL_WORK_* flags.
- Provide a stub implementation of arch_syscall_is_vdso_sigreturn(),
returning false for now.
- Introduce on_thread_stack() helper to detect if the current stack pointer
lies within the task’s kernel stack.
These additions enable later integration with the generic entry/exit
infrastructure while keeping existing PowerPC behavior unchanged.
No functional change is intended in this patch.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-3-mkchauras@gmail.com
Rename arch_irq_disabled_regs() to regs_irqs_disabled() to align with the
naming used in the generic irqentry framework. This makes the function
available for use both in the PowerPC architecture code and in the
common entry/exit paths shared with other architectures.
This is a preparatory change for enabling the generic irqentry framework
on PowerPC.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-2-mkchauras@gmail.com
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260515135143.259669-2-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jordan Rhee says:
====================
gve: add support for PTP gettimex64
This patch series adds support to obtain near-simultaneous NIC and
system timestamps with gettimex64. This enables daemons like
chrony and phc2sys to synchronize the system clock to the NIC clock.
GVE does not have direct register access to the NIC hardware clock, so
it must issue an AdminQ command to read the NIC clock. Two paths
for obtaining a cross-timestamp are implemented: a precise path using
system counter values sampled by the device, and a fallback path using
system counter values sampled in the driver using
ptp_read_system_prets()/postts().
To use the precise path, the current system clocksource must match the
units returned by the device, which on x86 is X86_TSC and on ARM64 is
ARM_ARCH_COUNTER. The clockid requested for the cross-timestamp must
be either CLOCK_REALTIME or CLOCK_MONOTONIC_RAW. These conditions hold
by default on GCP VMs using Chrony, so we expect the precise path to be
used the vast majority of the time. If the system clocksource is changed
to kvm-clock, it activates the fallback path. Ethtool counters have been
added to count how many times each path is used.
The uncertainty window in the precise path is typically around 1-2us,
while in the fallback path is around 60-80us. This table shows a
comparison in chrony tracking statistics between the precise path and
fallback path. The RMS offset is nearly 4 orders of magnitude smaller
in the precise path.
| | Fallback Path | Precise path |
| --------------- | --------------------- | ------------------------ |
| System time | 0.000000005 s slow | 0.000000001 s fast |
| Last offset | +0.000005606 seconds | +0.000000001 seconds |
| RMS offset | 0.000009020 seconds | 0.000000002 seconds |
| Frequency | 4.115 ppm fast | 0.362 ppm fast |
| Residual freq | +2.515 ppm | +0.000 ppm |
| Skew | 18.480 ppm | 0.001 ppm |
| Root delay | 0.000000001 seconds | 0.000000001 seconds |
| Root dispersion | 0.000081905 seconds | 0.000001169 seconds |
| Update interval | 0.5 seconds | 0.5 seconds |
| Leap status | Normal | Normal |
The first two patches pave the way for the PTP implementation by
quieting excessive logging and refactoring an existing routine for
thread safety.
====================
Link: https://patch.msgid.link/20260514225842.110706-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable chrony and phc2sys to synchronize system clock to NIC clock.
Two paths are implemented: a precise path using system counter values
sampled by the device, and a fallback path using system counter values
sampled in the driver using ptp_read_system_prets()/postts().
To use the precise path, the current system clocksource must match the
units returned by the device, which on x86 is X86_TSC and on ARM64 is
ARM_ARCH_COUNTER. The clockid requested for the cross-timestamp must
be either CLOCK_REALTIME or CLOCK_MONOTONIC_RAW. These conditions hold
by default on GCP VMs using Chrony, so we expect the precise path to be
used the vast majority of the time. If the system clocksource is changed
to kvm-clock, it activates the fallback path. Ethtool counters have been
added to count how many times each path is used.
The uncertainty window in the precise path is typically around 1-2us,
while in the fallback path is around 60-80us.
Stub implementions of adjfine and adjtime are added to avoid NULL
dereference when phc2sys tries to adjust the clock.
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Naman Gulati <namangulati@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-4-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mutex to protect the shared DMA buffer that receives NIC
timestamp reports. The NIC timestamp will be read from two different
threads: the periodic worker and upcoming `gettimex64`.
Move clock registration to the last step of initialization to ensure
that all data needed by the clock module is initialized before
the clock is exposed to usermode.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Ankit Garg <nktgrg@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AdminQ commands may return -EAGAIN under certain transient conditions.
These commands are intended to be retried by the driver, so logging
a formal error to the system log is misleading and creates
unnecessary noise.
Modify the logging logic to skip the error message when the result
is -EAGAIN, and move logging to dev_err_ratelimited() to avoid
spamming the log.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
bridge: mcast: Fix a possible use-after-free when removing a bridge port
Patch #1 fixes a possible use-after-free when removing a bridge port.
Patch #2 adds a test case that triggers the problem.
In net-next we can:
1. Add DEBUG_NET_WARN_ON_ONCE() when a port multicast context is
de-initialized while enabled.
2. When de-initializing a port multicast context, synchronously shutdown
all the timers that were initialized when the context was initialized.
====================
Link: https://patch.msgid.link/20260517121122.188333-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test toggling of multicast snooping when per-VLAN multicast snooping is
enabled. The test always passes, but without "bridge: mcast: Fix
possible use-after-free when removing a bridge port" it results in a
splat.
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517121122.188333-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ>
Fixes: 4b30ae9adb ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/
Reported-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When roaming, the FDB destination port can change without holding the
bridge's hash lock. Therefore, add missing READ_ONCE() annotations in
both RCU readers and readers that hold the lock. In the latter case, the
annotation is not needed in places where the FDB entry was already
validated to be a local entry since such entries cannot roam.
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517115009.175163-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware.
Fixes: caa2da34fd ("octeontx2-pf: Initialize and config queues")
Fixes: d322fbd172 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_count_phandle_with_args() returns the count on success and a negative
errno on failure, including -ENOENT when the "pairsets" property is
absent. The existing comparison in of_load_pse_pis() checks against
ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any
error return: legitimate DTs that omit "pairsets" trigger a spurious
"wrong number of pairsets" error and probe fails with -EINVAL.
Compare against -ENOENT so a missing "pairsets" property is correctly
treated as "this PI has no pairsets, continue".
Fixes: 9be9567a7c ("net: pse-pd: Add support for PSE PIs")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, during probe defferal the driver will print multiple times:
mscc-miim e20101a8.mdio: Cannot register MDIO bus (-517)
So, lets silence that by using the dev_err_probe() for printing the probe
error as it handles probe defferal.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260515120608.706361-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch single-line `use` imports in fmt.rs to vertical style for
better readability and easier maintenance.
Signed-off-by: Ke Sun <sunke@kylinos.cn>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260512-clean-fmt-use-v1-1-7ae7858192ac@kylinos.cn
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Somehow the rustdoc heuristics determined that a large chunk of the items
found in prelude should have documentation inlined. This bloats the
generated documentation size.
Also, for crates that optimize documentation with `cfg(doc)`, as the
documentation inlining makes use of the metadata compiled by just rustc, it
will not pick up the `cfg(doc)` attributes from the inlined documentation.
pin-init for example optimizes tuple/fn rendering using the nightly
fake_variadic feature [1], but this is missing from the inlined version
[2].
Thus, mark all prelude items as `#[doc(no_inline)]`.
Link: https://rust.docs.kernel.org/next/pin_init/trait.Zeroable.html#impl-Zeroable-for-(J,) [1]
Link: https://rust.docs.kernel.org/next/kernel/prelude/trait.Zeroable.html#impl-Zeroable-for-(J,) [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260420161636.1790502-1-gary@kernel.org
[ Reworded for typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In the error path of rtrs_srv_create_path_files(), the sysfs root folders
may already have been created and srv_path->kobj may already have been
initialized. If a later step fails, the cleanup currently calls
kobject_put(&srv_path->kobj) before
rtrs_srv_destroy_once_sysfs_root_folders(srv_path).
kobject_put() may drop the last reference to srv_path->kobj and invoke the
release callback, rtrs_srv_release(), which frees srv_path. The following
call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then
dereferences srv_path internally to access srv_path->srv, resulting in a
use-after-free.
This failure path is reached before rtrs_srv_create_path_files() returns
success, so the successful-path lifetime handling is not involved.
Fix this by destroying the sysfs root folders before calling
kobject_put(&srv_path->kobj), so srv_path is still valid while the helper
accesses it.
This issue was found by a static analysis tool I am developing.
Fixes: ae4c81644e ("RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260514113834.865530-1-lgs201920130244@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
