cscfg_config_sysfs_get_active_cfg() will be used from idle flows, while
sleeping locks are not allowed. Introduce sysfs_store_lock to replace
the mutex to protect sysfs_active_config and sysfs_active_preset
accesses, with IRQ-safe locking to avoid lockdep complaint.
Refactor cscfg_config_sysfs_activate() to use spinlock for
sysfs_active_config and activate/deactivate config.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-14-f88c4a3ecfe9@arm.com
ETMv4 driver save/restore callbacks still re-check conditions that are
already validated by the core layer before the callbacks are invoked.
Remove the duplicated checks and fold the two-level functions into
direct callback implementations. The obsolete WARN_ON() checks are
removed as well.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-13-f88c4a3ecfe9@arm.com
Add a helper etm4_pm_save_needed() to detect if need save context for
self-hosted PM mode and hook pm_save_disable() and pm_restore_enable()
callbacks through etm4_cs_pm_ops structure. With this, ETMv4 PM
save/restore is integrated into the core layer's CPU PM.
Organize etm4_cs_ops and etm4_cs_pm_ops together for more readable.
The CPU PM notifier in the ETMv4 driver is no longer needed, remove it
along with its registration and unregistration code.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-12-f88c4a3ecfe9@arm.com
The current implementation only saves and restores the context for ETM
sources while ignoring the context of links. However, if funnels or
replicators on a linked path resides in a CPU or cluster power domain,
the hardware context for the link will be lost after resuming from low
power states.
To support context management for links during CPU low power modes, a
better way is to implement CPU PM callbacks in the Arm CoreSight core
layer. As the core layer has sufficient information for linked paths,
from tracers to links, which can be used for power management.
As a first step, this patch registers CPU PM notifier in the core layer.
If a source device provides callbacks for saving and restoring context,
these callbacks will be invoked in CPU suspend and resume.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-11-f88c4a3ecfe9@arm.com
etm_setup_aux() fetches the per-CPU source pointer while preparing perf
AUX trace paths. This can race with CoreSight device unregistration, the
ETM device may has been released while the AUX setup still use it,
leading to use-after-free.
Move per-CPU path construction into etm_event_build_path() and use
the coresight_{get|put}_percpu_source_ref() pairs to take and drop
the device references, this ensures the device is safe to access during
path construction.
Update comments accordingly. Document a PREEMPT_RT corner case: the
put_device() may release resources while coresight_dev_lock (a raw
spinlock) is held, and the release may attempt to acquire a spinlock
that becomes sleepable under PREEMPT_RT. This will be fixed in the
future.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-10-f88c4a3ecfe9@arm.com
Move the per-CPU source pointer from ETM perf to the core layer, as this
will be used for not only perf session and also for CPU PM notifiers.
Provides coresight_{set|clear|get}_percpu_source() helpers to access the
per-CPU source pointer. Add a raw spinlock to protect exclusive access.
Device registration and unregistration call the set and clear helpers
for init and teardown the pointers.
Update callers to invoke coresight_get_percpu_source() for retrieving
the pointer.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-9-f88c4a3ecfe9@arm.com
coresight_get_ref() currently pins the provider module and takes a
reference on the parent device, but it does not pin &csdev->dev. Take a
reference on &csdev->dev when grabbing a CoreSight device and drop it in
coresight_put_ref().
Reorder the sequence to follow child-to-parent dependencies: first take
a reference on csdev, then on the parent device and grab the driver
module. Once the data and module are pinned, take a PM runtime
reference to power on the hardware.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-8-f88c4a3ecfe9@arm.com
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI).
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-7-f88c4a3ecfe9@arm.com
The hotplug lock is acquired and released in etm{3|4}_disable_sysfs(),
which are low-level functions. This prevents us from a new solution for
hotplug.
Firstly, hotplug callbacks cannot invoke etm{3|4}_disable_sysfs() to
disable the source; otherwise, a deadlock issue occurs. The reason is
that, in the hotplug flow, the kernel acquires the hotplug lock before
calling callbacks. Subsequently, if coresight_disable_source() is
invoked and it calls etm{3|4}_disable_sysfs(), the hotplug lock will be
acquired twice, leading to a double lock issue.
Secondly, when hotplugging a CPU on or off, if we want to manipulate all
components on a path attached to the CPU, we need to maintain atomicity
for the entire path. Otherwise, a race condition may occur with users
setting the same path via the Sysfs knobs, ultimately causing mess
states in CoreSight components.
This patch moves the hotplug locking from etm{3|4}_disable_sysfs() into
enable_source_store(). As a result, when users control the Sysfs knobs,
the whole flow is protected by hotplug locking, ensuring it is mutual
exclusive with hotplug callbacks.
Note, the paired function etm{3|4}_enable_sysfs() does not use hotplug
locking, which is why this patch does not modify it.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-6-f88c4a3ecfe9@arm.com
The CPU ID can be fetched directly from the coresight_device structure,
so the .cpu_id() callback is no longer needed.
Remove the .cpu_id() callback from source ops and update callers
accordingly.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-5-f88c4a3ecfe9@arm.com
Add a new flag CORESIGHT_DESC_CPU_BOUND to indicate components that
are CPU bound. Populate CPU ID into the coresight_device structure;
otherwise, set CPU ID to -1 for non CPU bound devices.
Use the {0} initializer to clear coresight_desc structures to avoid
uninitialized values.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-4-f88c4a3ecfe9@arm.com
This commit extracts the allocation and initialization of the coresight
device structure into a separate function to make future extensions
easier.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-3-f88c4a3ecfe9@arm.com
If a helper fails to be enabled, unwind any helpers that were already
enabled earlier in the loop. This avoids leaving partially enabled
helpers behind.
Fixes: 6148652807 ("coresight: Enable and disable helper devices adjacent to the path")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-2-f88c4a3ecfe9@arm.com
In coresight_enable_sysfs(), for non-CPU sources (SOFTWARE, TPDM,
OTHERS), the source device is enabled via coresight_enable_source_sysfs()
before idr_alloc_u32() maps the path. If idr_alloc_u32() fails, the
original code jumped directly to err_source, which only calls
coresight_disable_path() and coresight_release_path(). The source device
was left enabled with an incremented refcnt but no path tracked for it,
leaving the device in an inconsistent state.
Disable the source before jumping to err_source so the enable and path
operations are fully unwound.
Fixes: 5c0016d7b3 ("coresight: core: Use IDR for non-cpu bound sources' paths.")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-1-f88c4a3ecfe9@arm.com
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260504081804.3260-3-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260424104011.2616970-1-johan@kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://patch.msgid.link/20260514124835.108532-2-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Regions with a BO are checked against the BO size, but the SRAM
region is not. The SRAM region doesn't have a BO, but the command stream
region size should be checked against the SRAM size. The job's
"sram_size" isn't useful here because an evil userspace could lie about
the size.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260513185434.1667045-1-robh@kernel.org
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Introduce device-managed helpers for clocksource registration.
The clocksource framework currently provides __clocksource_register_scale()
along with convenience wrappers for Hz and kHz registration. However,
drivers must handle error paths and cleanup manually, typically by pairing
registration with an explicit clocksource_unregister() call.
Add a devm-based variant, __devm_clocksource_register_scale(), along with
devm_clocksource_register_hz() and devm_clocksource_register_khz() helpers.
These helpers register the clocksource and attach a devres action to
automatically unregister it on driver detach or probe failure.
This simplifies driver code by:
* removing explicit cleanup paths
* ensuring correct teardown ordering
* aligning with the devm-based resource management model widely used
across the kernel
While drivers can open-code devm_add_action_or_reset(), providing a
dedicated helper avoids duplication, reduces boilerplate, and ensures
consistent usage across drivers, following patterns used in other
subsystems.
This is also particularly useful for drivers built as modules, where
device-managed resource handling avoids manual cleanup in remove paths and
ensures correct teardown on module unload.
This helper is self-contained and can be adopted progressively by drivers.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260506153831.605159-1-daniel.lezcano@oss.qualcomm.com
Before, when rtla got a signal, it stopped the main trace but not the
record trace. With "--on-end trace", this can lead to
save_trace_to_file() failing to keep up, especially on a debug kernel.
Plus, it adds post-stoppage noise to the trace file.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Fixes: c73cab9dbe ("rtla/timerlat_hist: Stop timerlat tracer on signal")
Fixes: a4dfce7559 ("rtla/timerlat_top: Stop timerlat tracer on signal")
Fixes: 3aadb65db5 ("rtla/timerlat: Add action on end feature")
Link: https://lore.kernel.org/r/20260512173731.2151841-1-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add unit tests covering all functions in the actions module, including
both valid and invalid inputs and all action types, except for
actions_perform(), where only shell and continue actions are tested.
To support testing multiple modules, the unit test build was modified so
that it links the entire rtla-in.o file. For this to work, the main()
function in rtla.c was declared weak, so that the unit test main is able
to override it.
Other included minor changes to unit tests are:
- Make unit test output verbose to show which tests are being run, now
that we have more than 3 tests.
- Add unit_tests file to .gitignore.
- Split unit test sources to one file per test suite, and keep only
main() function in unit_tests.c.
- Fix Makefile dependencies so that "make unit-tests" will rebuild the
binary with the changes in the commit.
Also with the linking the entire rtla-in.o file, it now has rtla's
nr_cpus symbol, so the declaration in utils unit tests is made extern.
Assisted-by: Composer:composer-2-fast
Link: https://lore.kernel.org/r/20260424140244.958495-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add a new script check-cgroup-match.sh that retrieves the cgroup of the
main rtla process and compares it to the cgroup of the rtla workload
threads.
Add a new test based on this script, for both osnoise and timerlat
tools, testing the variant of -C without argument (which sets the cgroup
of the workload to the cgroup of the rtla main process).
Note that this has to be tested in kernel mode to be significant for
timerlat tool, as user workloads inherit the parent rtla process cgroup
even without the option.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-10-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add runtime test for rtla-timerlat's -k/--kernel-threads and
-u/--user-threads options using get_workload_pids.sh to check whether
the appropriate threads are being created.
The tests are implemented for both top and hist. Additionally, all tests
related to timerlat threads are moved to a separate section in the test
files. The latter is also done for rtla-osnoise tests.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-9-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add a runtime test for -H/--house-keeping option for both osnoise and
timerlat tools, with affinity checking similar to what is done for
-c/--cpus.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Cover all options regarding histogram formatting for both
rtla-osnoise-hist and rtla-timerlat-hist tools. All options also have
output checking using positive or negative match, except for
-b/--bucket-size and -E/--entries, which cannot be tested in isolated
due to the output depending on the actual data collected.
Old -E/--entries test for rtla-osnoise was replaced with a new one
equivalent to the timerlat one.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
rtla-timerlat-top's --aa-only option is currently only tested for return
value.
Extend the tests to also check that only auto-analysis is being done via
a negative match for the "Timer Latency" text in the top header, and
further split the test case into two:
- one test case for --aa-only stopping on threshold
- one test case for --aa-only exiting without threshold being hit
For both cases, the expected output ("analyzing it" or "Max latency was"
respectively) is checked against in addition to the negative match.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
For testing the -a/--auto option in timerlat tool, the string "analyzing
it" is matched against to make sure auto-analysis was triggered.
Use the same string as a negative match for --aa-only option test.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
RTLA runtime tests verify the -c/--cpus options, but do not check
whether the correct affinity is actually applied.
Add a script named check-cpus.sh that retrieves the affinity of all
workload threads and use it to check the -c/--cpus option for both
osnoise and timerlat tools.
Also add missing -c/--cpus test for osnoise.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
RTLA runtime tests that check workload processes (currently the test
case "verify -P/--priority" of timerlat.t and "verify the --priority/-P
param" of osnoise.t) use "pgrep timerlatu/" or "pgrep osnoise/"
respectively to identify the workload.
Make them more robust by adding a get_workload_pids() helper that
finds the main rtla process and returns the PIDs of all siblings other
than the test script itself, plus all child processes of kthreadd that
have the osnoise/timerlat kthread pattern comm.
This filters out any spurious processes not related to the running test
that happen to have "timerlatu/" or "osnoise/" in their command, for
example, a user grepping the same names at the time of the running of
the test.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
RTLA runtime tests currently do not cover both tool variants for osnoise
and timerlat properly. Many tests applicable to both tools are only
tested for one tool, selected randomly.
Introduce two new shell functions, check_top_hist() and
check_top_q_hist(). The functions use the same syntax as check() and run
check() on the arguments twice: once replacing the "TOOL" string in the
command with "top" (or "top -q"), once replacing it with "hist". The top
-q variant is used for tests relying on messages printed after aborting
the RTLA main loop with a starting new line, which only happens for top
tools in quiet mode; without -q, the top output is printed on the same
line and the matches would fail.
Tests that are applicable to both top and hist tools were modified to
the run for both; additionally, tests that were already done for both
tools were migrated to the new shell functions, unless the test command
or matches differ between the tools. Additional tests were added to test
tool-specific help messages.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Fix --dump-task to --dump-tasks in timerlat_hist usage string
and getopt_long table for consistency with timerlat_top.
Add missing --dump-tasks to timerlat_top usage synopsis.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Fixes: 2091336b9a ("rtla/timerlat_hist: Add auto-analysis support")
Link: https://lore.kernel.org/r/20260414185223.65353-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
6677 2776 64 9517 252d drivers/infiniband/core/cma_configfs.o
After:
=====
text data bss dec hex filename
6901 2552 64 9517 252d drivers/infiniband/core/cma_configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/6acd9c8a79b868b5e541a7e080a6b4b145e4fd4f.1778923041.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Most drivers do this already, but some open-code a memset. Switch
all instances found. qedr_copy_qp_uresp() is already called with
zeroed memory so that memset is redundant.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
All of these are fully initialized so no bugs are being fixed. Add
the missing initializer as a precaution against future changes.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
At some point the response structs were added and rdma-core is using
them, but the kernel was not changed to use them as well. Replace
the open-coded copy with the right struct and ib_respond_udata().
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The Mellanox drivers have a pattern where they compute the response
length they think they need based on what the user asked for, then
blindly write that ignoring the provided size limit on the response
structure.
Drop this and just use ib_respond_udata() which caps the response
struct to the user's memory, which is fine for what mlx5 is doing.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
These cases carefully work around 32-bit unpadded structures, but
the min integrated into ib_respond_udata() handles this
automatically. Zero-initialize data that would not have been copied.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Convert the pattern:
ib_copy_to_udata(udata, &resp, sizeof(resp));
Using Coccinelle:
@@
identifier resp;
expression udata;
@@
- ib_copy_to_udata(udata, &resp, sizeof(resp))
+ ib_respond_udata(udata, resp)
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use copy_to_user() directly since the data is not being placed in the
udata response memory.
It is unclear why this is trying to do two copies, but leave it alone.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Convert the pattern:
if (udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen))
Using Coccinelle:
virtual patch
virtual context
virtual report
@@
expression udata;
@@
(
- udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
|
- udata->inlen > 0 && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
)
@@
expression udata;
@@
- udata && udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
These cases are already checking for zeroed data that the kernel does
not understand.
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While being more verbose using a named initializer yields easier to
understand code and doesn't rely on the two hidden zeros in the
PCI_VDEVICE macro.
While at it, also drop the explicit zero in the terminating entry.
This doesn't introduce any changes to the compiled result of the array,
which was confirmed on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507075437.2669363-2-u.kleine-koenig@baylibre.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Simplify umem allocation by using flexible array member.
Add __counted_by to get extra runtime analysis.
Suggested-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Bernard Metzler <bernard.metzler@linux.dev>
Link: https://patch.msgid.link/20260511141149.52362-1-bernard.metzler@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The variable 'rc' is initialized to 0 and returned at the end of
bng_re_process_qp_event(), but it is never modified in between.
Simplify the function by removing the redundant variable and returning 0
directly. This cleans up the code and avoids potential compiler warnings
about unused variables.
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Link: https://patch.msgid.link/20260505085709.1755534-1-roheetchavan@gmail.com
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
hns RoCE supports 4 congestion control algorithms. Each algorihm
involves multiple parameters. Support configuring these parameters
by debugfs.
Here are some examples of this feature:
* The directory structure:
$ ls /sys/kernel/debug/hns_roce/0000\:35\:00.0/
dcqcn_cc_param dip_cc_param hc3_cc_param ldcp_cc_param
$ ls /sys/kernel/debug/hns_roce/0000\:35\:00.0/dcqcn_cc_param/
ai al alp ashift cnp_time f g lifespan max_speed tkp tmp
* Read the value of a param:
$ cat /sys/kernel/debug/hns_roce/0000\:35\:00.0/dcqcn_cc_param/ai
1
* Set a new value for a param:
$ echo 2 > /sys/kernel/debug/hns_roce/0000\:35\:00.0/dcqcn_cc_param/ai
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260507012148.1079712-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
