When vfs_mkdir() fails, the error code is not extracted from the
returned error pointer. This causes mkdir_error to be reached with
ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a
proper error pointer.
Fix this by extracting the error code from the error pointer when
vfs_mkdir() fails.
Fixes: 406fad7698 ("cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://patch.msgid.link/20260513103406.202320-1-zenghongling@kylinos.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ad4062 driver gained support for the gpiochip and now fails
to build when GPIOLIB is disabled:
390-linux-ld: drivers/iio/adc/ad4062.o: in function `ad4062_gpio_get':
drivers/iio/adc/ad4062.c:1383:(.text+0x3dc): undefined reference to `gpiochip_get_data`
Add a Kconfig dependency for this.
Fixes: da1d3596b1 ("iio: adc: ad4062: Add GPIO Controller support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a device-tree overlay for the Toradex DSI to HDMI Adapter, an
accessory that connects to the Verdin DSI_1 interface and provides a
full-size HDMI Type-A output. The adapter is based on the Lontium
LT8912B DSI-to-HDMI bridge.
The overlay is also combined with the Verdin AM62 carrier board device
trees to provide ready-to-use DTBs for the Dahlia and Development Board
carriers, in both WiFi and non-WiFi SoM variants.
Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-hdmi-adapter
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://patch.msgid.link/20260506143427.348806-2-ivitro@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Implement the TODO in knav_queue_remove() by stopping PDSPs and
freeing queue regions and queue ranges before disabling runtime PM,
mirroring the cleanup performed in the probe error path.
Set device_ready to false before cleanup to prevent any further
use of the device during teardown.
This ensures resources are released on driver unbind and avoids
leaking queue/region state.
Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Md Shofiqul Islam <shofiqtest@gmail.com>
Link: https://lore.kernel.org/linux-arm-kernel/20260506154114.2288-1-shofiqtest@gmail.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
k3_ringacc_ring_pop_tail_io() and k3_ringacc_ring_pop_tail_proxy()
incorrectly use K3_RINGACC_ACCESS_MODE_POP_HEAD instead of
K3_RINGACC_ACCESS_MODE_POP_TAIL. This will result in ring elements being
popped in the reverse order of that which the caller expects. Fix this.
Fixes: 3277e8aa25 ("soc: ti: k3: add navss ringacc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@ti.com>
Link: https://patch.msgid.link/20260501124129.362192-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The LM3559 is very similar to the LM3560, but it operates at much lower
currents. This may result in incorrect current selection if LM3560 ranges
are applied to the LM3559. Implement driver data matching to use
device-specific current configurations.
Since the driver no longer supports platform data and device configuration
is performed more granularly, move the remaining enums from the header
into the driver file and remove the header.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add support for power management features to better control the LM3560
within the media framework. To achieve the desired PM support, the HWEN
GPIO and VIN power supply were added and configured into power on/off
sequences. Added PM operations along with the PM configuration setup.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Since there are no users of this driver via platform data, remove the
platform data support and switch to using Device Tree bindings.
Converting to Device Tree assumes dynamic and independent registration of
LEDs. To monitor the configured LEDs, a bitmap has been added. This makes
LED cleanup more robust and less context dependent.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Pass the device's own mutex lock to the control handler so that the media
framework can handle control access instead of managing it manually. The
lock must be common to both sub-devices since they share same hardware,
so the individual sub-device locks will not work here.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The existing driver does not call media subdev registration, making it
invisible to the media framework. Since the LM3560 supports two
independent LEDs, register each LED as a separate media entity.
Because registering LEDs before device initialization may cause access
attempts before the hardware is ready, lm3560_init_device has been moved
before the subdevice initializations.
An additional helper, lm3560_subdev_cleanup, was added to release LED0 if
the initialization of LED1 fails, and to deregister both LEDs in the
remove function.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Usual mixed bag of ancient issues and more recent.
Lots of new contributors this cycle and some of that work has
uncovered bugs in the code they were looking at.
core,buffer
- Add missing dma_fence_put()
- hw-consumer - Fix a use after free in cleaning up a list.
core,inkern
- Fix return value handling in iio_read_channel_processed_scale() that
meant a correct result was treated as an error.
adi,ad3530r
- Fix powerdown mode strings for AD3531 and AD3531R.
adi,ad4695
- Fix ordering so by the time device transitions to offload mode
all setup transfers are done. This avoids issues with offload
controllers that cannot handle normal transfers after offload has
begun.
adi,ad5686
- Fix wrong initialization of reference bit for single channel parts.
- Fix off by one in check on input raw value
adi,adis16260
- Fix division by zero triggerable from sysfs.
adi,adis16550
- Fix a stack leak to userspace.
amlogic,meson-adc
- Fix a buffer allocation leak in an error path.
bosch,bmp280
- Fix a stack leak to userspace.
capella,cm3323
- Fix wrong return value rather than register value being written
data->reg_conf on write.
maxim,max5821
- Check correct length i2c_master_send() in max5821_sync_powerdown_mode().
mediatek,mt6359
- Fix potential uninitialized value.
nuvoton,npcm_adc
- Fix unbalance clk_disable_unprepare()
nxp,sar-adc
- Avoid a division by zero if the common clock framework is disabled.
- Fix a division by zero triggerable from sysfs.
- Ensure all of struct dma_slave_config is initialized.
qcom,spmi-adc-gen3
- Fix an off by one that leads to an out of bounds array read.
samsung,ssp_sensors
- Ensure work is cancelled during remove to avoid use after free.
sensiron,scd30
- Fix a division by zero triggerable from sysfs.
st,lsm6dsx
- Fix a stack leak to userspace.
st,magn
- Fix default value for data ready pin selection for devices that
have no data ready pin selection.
vishay,veml6070
- Close a resource leak in an error path.
winsen,mhz19b
- Reject over-sized serial messages from device.
xilinx,xadc
- Fix sequencer handling for dual MUX cases
-----BEGIN PGP SIGNATURE-----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=Ja6W
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
iio-fixes-for-7.a IIO: 1st set of fixes for the 7.1 cycle
Usual mixed bag of ancient issues and more recent.
Lots of new contributors this cycle and some of that work has
uncovered bugs in the code they were looking at.
core,buffer
- Add missing dma_fence_put()
- hw-consumer - Fix a use after free in cleaning up a list.
core,inkern
- Fix return value handling in iio_read_channel_processed_scale() that
meant a correct result was treated as an error.
adi,ad3530r
- Fix powerdown mode strings for AD3531 and AD3531R.
adi,ad4695
- Fix ordering so by the time device transitions to offload mode
all setup transfers are done. This avoids issues with offload
controllers that cannot handle normal transfers after offload has
begun.
adi,ad5686
- Fix wrong initialization of reference bit for single channel parts.
- Fix off by one in check on input raw value
adi,adis16260
- Fix division by zero triggerable from sysfs.
adi,adis16550
- Fix a stack leak to userspace.
amlogic,meson-adc
- Fix a buffer allocation leak in an error path.
bosch,bmp280
- Fix a stack leak to userspace.
capella,cm3323
- Fix wrong return value rather than register value being written
data->reg_conf on write.
maxim,max5821
- Check correct length i2c_master_send() in max5821_sync_powerdown_mode().
mediatek,mt6359
- Fix potential uninitialized value.
nuvoton,npcm_adc
- Fix unbalance clk_disable_unprepare()
nxp,sar-adc
- Avoid a division by zero if the common clock framework is disabled.
- Fix a division by zero triggerable from sysfs.
- Ensure all of struct dma_slave_config is initialized.
qcom,spmi-adc-gen3
- Fix an off by one that leads to an out of bounds array read.
samsung,ssp_sensors
- Ensure work is cancelled during remove to avoid use after free.
sensiron,scd30
- Fix a division by zero triggerable from sysfs.
st,lsm6dsx
- Fix a stack leak to userspace.
st,magn
- Fix default value for data ready pin selection for devices that
have no data ready pin selection.
vishay,veml6070
- Close a resource leak in an error path.
winsen,mhz19b
- Reject over-sized serial messages from device.
xilinx,xadc
- Fix sequencer handling for dual MUX cases
* tag 'iio-fixes-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: adc: viperboard: Fix error handling in vprbrd_iio_read_raw
iio: gyro: itg3200: fix i2c read into the wrong stack location
iio: dac: ad5686: fix powerdown control on dual-channel devices
iio: dac: ad5686: acquire lock when doing powerdown control
iio: temperature: tsys01: fix broken PROM checksum validation
iio: dac: ad3530r: Fix AD3531/AD3531R powerdown mode strings
iio: buffer: hw-consumer: fix use-after-free in error path
iio: dac: ad5686: fix input raw value check
iio: dac: ad5686: fix ref bit initialization for single-channel parts
iio: ssp_sensors: cancel delayed work_refresh on remove
iio: adc: meson-saradc: fix calibration buffer leak on error
iio: dac: max5821: fix return value check in powerdown sync
iio: adc: mt6359: fix unchecked return value in mt6358_read_imp
iio: adc: qcom-spmi-adc5-gen3: Fix off by one in adc5_gen3_get_fw_channel_data()
iio: imu: adis16550: fix stack leak in trigger handler
iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
iio: adc: nxp-sar-adc: zero-initialize dma_slave_config
iio: light: cm3323: fix reg_conf not being initialized correctly
iio: magnetometer: st_magn: fix default DRDY pin selection for LIS2MDL
...
Iterate LIBUNWIND_ARCHS when setting up CONFIG_ and HAVE_ definitions
rather than treating each architecture individually. This sets up the
libunwind build variables and C definitions beyond x86 and
arm/aarch64. The existing naming convention is followed for
compatibility.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Guan <guanli.oerv@isrc.iscas.ac.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The separate test files only exist to pass a different #include,
instead have a single source file and pass -include to $(CC) to
include the relevant header file for the architecture being
tested. Generate the rules using a foreach loop. Include tests for all
current libunwind architectures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Guan <guanli.oerv@isrc.iscas.ac.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, both libdw and libunwind define 'unwind__get_entries'. This
causes a duplicate symbol build failure when both are compiled into
perf.
This commit refactors the DWARF unwind post-processing to be
configurable at runtime via the .perfconfig file option
'unwind.style', or using the argument '--unwind-style' in the commands
'perf report', 'perf script' and 'perf inject', in a similar manner to
the addr2line or the disassembler style.
The file 'tools/perf/util/unwind.c' adds the top-level dispatch
function 'unwind__get_entries'. The backend implementations are
renamed to 'libdw__get_entries' and 'libunwind__get_entries'. Both are
attempted as fallbacks if not configured, or if the primary backend
fails.
Fixes: 2e9191573a ("perf build: Remove NO_LIBDW_DWARF_UNWIND option")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: libunwind-devel@nongnu.org
Cc: Li Guan <guanli.oerv@isrc.iscas.ac.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Will Deacon <will@kernel.org>
[ Don't mix declarations and code, move 'entries' variable to the start of scope ]
[ Use pr_warning_once() instead of pr_err() in stubs for get_entries(), suggested by a local sashiko instance ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The driver proceeds to the reception phase even if the preceding
transmission fails.
This uses a goto error label for an early bail out and ensures the mutex is
properly unlocked in case of failure.
Fixes: ffd8a6e7a7 ("iio: adc: Add viperboard adc driver")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
itg3200_read_all_channels() takes `__be16 *buf' as a parameter and
fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the
parameter (a pointer), `&buf' is the address of the local pointer
slot on the stack of itg3200_read_all_channels(), not the address
of the caller's scan buffer. The (char *) cast hides the type
mismatch.
i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)
= 8 bytes into the parameter's stack slot, which is discarded when
the function returns. The caller's scan buffer in
itg3200_trigger_handler() is never written to, so
iio_push_to_buffers_with_timestamp() pushes uninitialised stack
contents to userspace via /dev/iio:deviceX every scan -- both a
functional bug (no actual gyroscope or temperature data is
delivered through the triggered buffer) and an information leak.
The non-buffered read_raw() path is unaffected: it goes through
itg3200_read_reg_s16() which uses `&out' on a local s16 value,
where that is correct.
Drop the spurious `&' so the i2c read writes into the caller's
buffer.
Fixes: 9dbf091da0 ("iio: gyro: Add itg3200")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix powerdown control by using a proper bit shift for the powerdown mask
values. During initialization, powerdown bits are initialized so that
unused bits are set to 1 and the correct bit shift is used. Dual-channel
devices use one-hot encoding in the address and that reflects on the
position of the powerdown bits, which are not channel-index based
for that case. Quad-channel devices also use one-hot encoding for the
channel address but the result of log2(address) coincides with the channel
index value. Mask as 0x3U is used rather than 0x3, because shift can reach
value of 30 (last channel of a 16-channel device), which would mess with
the sign bit. The issue was introduced when first adding support for
dual-channel devices, which overlooked powerdown control differences.
Fixes: 7dc8faeab3 ("iio: dac: ad5686: add support for AD5338R")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Protect access of pwr_down_mode and pwr_down_mask fields with existing
mutex lock. Each channel exposes their own attributes for controlling
powerdown modes and powerdown state. This fixes potential race conditions
as those the write functions perform non-atomic read-modify-write
operations to those pwr_down_* fields. This issue exists since the ad5686
driver was first introduced.
Fixes: c2f37c8dca ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters")
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The current implementation of tsys01_crc_valid() incorrectly sums the
first word (n_prom[0]) repeatedly instead of iterating over the 8 words
retrieved from the PROM. This leads to a checksum mismatch and probe
failure on hardware.
According to the TSYS01 datasheet, the PROM consists of 8 words. A valid
check must iterate through all 8 words to verify the integrity of the
calibration data. The current driver only checks the first word 8 times.
Note: This fix was identified during a code audit and is based on
datasheet specifications. It has not been tested on real hardware.
Fixes: 43e53407f6 ("Add tsys01 meas-spec driver support")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The AD3531/AD3531R has different output operating modes from the
AD3530/AD3530R. According to the AD3531/AD3531R datasheet, the
powerdown modes are:
01: 500 Ohm output impedance
10: 3.85 kOhm output impedance
11: 16 kOhm output impedance
The driver currently uses the AD3530R modes (1k, 7.7k, 32k) for all
variants, which is incorrect for AD3531/AD3531R.
Add AD3531R-specific powerdown mode strings and assign them to the
AD3531/AD3531R chip variants.
Fixes: 93583174a3 ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R")
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe().
Fixes: 48b66f8f93 ("iio: Add hardware consumer buffer support")
Reported-by: sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260427-iio_buf-v1-1-2bbdac844647%40gmail.com
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix range check for input raw value, which is off by one, i.e., for a
10-bit DAC the max valid value is 1023, but 1 << 10 equals 1024, which
passes the previous check, allowing an out-of-range write. The issue
exists since the ad5686 driver was first introduced.
Fixes: c2f37c8dca ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The reference bit position was ignored when writing the register at the
probe() function (!!val was used). When such bit is 1, internal voltage
reference is disabled so that an external one can be used. For
multi-channel devices, bit 0 of the Internal Reference Setup command
behaves the same way, so AD5686_REF_BIT_MSK is created. The issue exists
since support for single-channel devices were first introduced.
Fixes: be1b24d245 ("iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The work_refresh may still be pending or running when the device is
removed, cancel the delayed work_refresh in remove path.
Fixes: 50dd64d57e ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
meson_sar_adc_temp_sensor_init() allocates a buffer with
nvmem_cell_read(), but the old code leaked it if
syscon_regmap_lookup_by_phandle() failed.
Fix this by adding missing kfree(buf).
Fixes: d6f2eac644 ("iio: adc: meson: no devm for nvmem_cell_get")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The function max5821_sync_powerdown_mode() returned the result of
i2c_master_send() directly. If a partial transfer occurred, it would
be incorrectly treated as a success by the caller.
While the caller currently handles the positive return value of 2 as
success, this patch refactors the function to return 0 on full success
and -EIO on short writes. This ensures robust error handling for
incomplete transfers and improves code maintainability by using
sizeof(outbuf).
Fixes: 4729889727 ("iio: add support of the max5821")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In mt6358_read_imp(), the variable val_v is passed to regmap_read()
but the return value is not checked. If the read fails, val_v remains
uninitialized and its random stack content is subsequently reported
as a measurement result.
Initialize val_v to zero to ensure a predictable value is reported
in case of bus failure and to prevent potential stack data leakage.
This also satisfies static analyzers that might otherwise flag the
variable as used uninitialized.
Fixes: 3587914bf6 ("iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The > in "if (chan > ADC5_MAX_CHANNEL)" should be >= to prevent an out
of bound read of the adc->data->adc_chans[] array.
Fixes: baff45179e ("iio: adc: Add support for QCOM PMIC5 Gen3 ADC")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
adis16550_trigger_handler() declares the scan data array on the stack
without initializing it. The memcpy() at the bottom fills only the
first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and
iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the
8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data
which leaks to userspace on ever trigger.
Fix this all by just zero-initializing the structure on the stack.
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: e4570f4bb2 ("iio: imu: adis16550: align buffers for timestamp")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The tagged FIFO path declares iio_buff on the stack with __aligned(8)
but no initializer, but there is a hole in the structure, which will
then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be
copied, but the space between that and the timestamp are not
initialized.
Commit c14edb4d0b ("iio:imu:st_lsm6dsx Fix alignment and data leak
issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,
but for the tagged path it only added the alignment qualifier and not
the initializer :(
Fix this by just zero-initializing the structure on the stack.
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: c14edb4d0b ("iio:imu:st_lsm6dsx Fix alignment and data leak issues")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: David Lechner <dlechner@baylibre.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy@kernel.org>
Fixes: 872c8014e0 ("iio: pressure: bmp280: drop sensor_data array")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
nxp_sar_adc_start_cyclic_dma() only fills the RX-side members of
dma_slave_config before passing it to dmaengine_slave_config().
Zero-initialize the structure so unused members do not contain stack
garbage. Some DMA engines consult optional dma_slave_config fields, so
leaving them uninitialized can cause DMA setup failures.
Fixes: 4434072a89 ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The code stores the return value of i2c_smbus_write_word_data()
in data->reg_conf; however, this value represents the result
of the write operation and not the value actually written to
the configuration register. This meant that the contents of
data->reg_conf did not truly reflect the contents
of the hardware register.
Instead, save the value of the register before the write
and use this value in the I2C write.
The bug was found by code inspection: i2c_smbus_write_word_data()
returns 0 on success, not the value written to the register.
Tested using i2c-stub on a Raspberry Pi 3B running a custom 6.19.10
kernel. Before loading the driver, the configuration register 0x00
CM3323_CMD_CONF was populated with 0x0030 using
`i2cset -y 11 0x10 0x00 0x0030 w`, encoding an integration time of 320ms
in bits[6:4].
Due to incorrect initialization of data->reg_conf in
cm3323_init(), the print of integration_time returns 0.040000
instead of the expected 0.320000. This happens because the read of the
integration_time depends on cm3323_get_it_bits() that is based on the
value of data->reg_conf, which is erroneously set to 0.
With this fix applied, data->reg_conf correctly saves 0x0030 after init
and the successive integration_time reports 0.320000 as expected.
Fixes: 8b05442637 ("iio: light: Add support for Capella CM3323 color sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Aldo Conte <aldocontelk@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The device tree binding for st,lis2mdl does not support
st,drdy-int-pin property. However, when no platform data is provided
and the property is absent, the driver falls back to default_magn_pdata
which hardcodes drdy_int_pin = 2. This causes
`st_sensors_set_drdy_int_pin` to fail with -EINVAL because the LIS2MDL
sensor settings have no INT2 DRDY mask defined.
Fix this by checking the sensor's INT2 DRDY mask availability at
probe time and selecting the appropriate default pin. Sensors that
do not support INT2 DRDY will default to INT1, while all others
retain the existing default of INT2.
Fixes: 38934daf7b ("iio: magnetometer: st_magn: Provide default platform data")
Signed-off-by: Advait Dhamorikar <advaitd@mechasystems.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes,
kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial
kref to 1. It then calls dma_resv_add_fence() which takes a second
reference (kref=2), and stores a raw pointer in block->fence.
On the success path the function returns without calling dma_fence_put()
to release the initial reference, so every buffer enqueue permanently
leaks one kmalloc-128 allocation.
The iio_buffer_cleanup() work item only releases the temporary reference
taken during completion signalling by iio_buffer_signal_dmabuf_done();
the initial reference from dma_fence_init() is never released.
With four iio_rwdev instances at 240kHz and 512 samples per buffer,
this produces ~1875 kmalloc-128 allocations per second matching the
observed slab growth exactly. A test with ftrace confirmed that the
dma_fence_destroy event was never triggered.
Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring
ownership of the fence to the DMA reservation object. The DMA fence then
gets properly discarded after being signalled.
Fixes: 3e26d9f08f ("iio: core: Add new DMABUF interface infrastructure")
Originally-by: James Nuss <jamesnuss@nanometrics.ca>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a validation check for the sampling frequency value before using it
as a divisor. A user writing zero or a negative value to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel.
Also prevent unsigned integer underflow when the computed cycle count is
smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to
a huge value.
Fixes: 4434072a89 ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.
KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:
BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7
The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.
Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name.
Fixes: 00244da40f ("crypto/krb5: Implement the Kerberos5 rfc3961 encrypt and decrypt functions")
Fixes: 6c3c0e86c2 ("crypto/krb5: Implement the AES enctypes from rfc8009")
Cc: stable@vger.kernel.org
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document True Random Number Generator on Qualcomm Nord SoC.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the CONFIG_OF preprocessor guard and remove of_match_ptr() because
OF matching is stubbed out when CONFIG_OF=n.
Reformat atmel_ecc_dt_ids for consistency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since MODULE_DEVICE_TABLE() keeps atmel_sha204a_dt_ids referenced, drop
the unnecessary __maybe_unused annotation. Also remove of_match_ptr()
because OF matching is stubbed out when CONFIG_OF=n.
Reformat atmel_sha204a_dt_ids to silence a checkpatch error and
atmel_sha204a_id for consistency.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use designated initializers for the report structs instead of clearing
the struct with memset() and then copying fixed strings with strscpy()
at runtime.
This keeps the structs zero-initialized, lets the compiler diagnose
oversized string literals, and makes the code easier to read.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory allocated for priv in safexcel_pci_probe() is not freed in the
error paths, as well as in the PCI remove function. Fix this by using
device managed allocation.
Fixes: 625f269a5a ("crypto: inside-secure - add support for PCI based FPGA development board")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When meson_allocate_chanlist() fails after a partial allocation, it already
unwinds the allocated chanlist state through its local error path.
meson_crypto_probe() then jump to error_flow and calls
meson_free_chanlist() again, causing the same per-flow resources to be torn
down twice. In the reproduced failure path, the second teardown
re-entered crypto_engine_exit() on an already destroyed worker and KASAN
reported a slab-use-after-free in kthread_destroy_worker().
Prevent double-free by handling partial allocation failures locally within
meson_allocate_chanlist() and skipping the outer cleanup path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1,
using the reproducer under tools/testing/meson_crypto_probe. The reproducer
forces the second dma_alloc_attrs() call in the gxl-crypto probe path to
return NULL, making meson_allocate_chanlist() fail after partial
initialization. On the unpatched kernel this reliably triggered a
slab-use-after-free. With this fix applied, the same reproducer no longer
emits any KASAN report and the probe fails cleanly with -ENOMEM.
==================================================================
BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0
Read of size 8 at addr ff1100010c057a68 by task insmod/265
CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? kthread_destroy_worker+0xb2/0xd0
? kthread_destroy_worker+0xb2/0xd0
kasan_report+0xca/0x100
? kthread_destroy_worker+0xb2/0xd0
kthread_destroy_worker+0xb2/0xd0
meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto]
platform_probe+0x99/0x140
really_probe+0x1c6/0x6a0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x248/0x310
? acpi_driver_match_device+0xb0/0x100
driver_probe_device+0x48/0x210
? __pfx___device_attach_driver+0x10/0x10
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x104/0x190
? __pfx_bus_for_each_drv+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
__device_attach+0x19d/0x3b0
? __pfx___device_attach+0x10/0x10
? do_raw_spin_unlock+0x53/0x220
device_initial_probe+0x78/0xa0
bus_probe_device+0x5b/0x130
device_add+0xcfd/0x1430
? __pfx_device_add+0x10/0x10
? insert_resource+0x34/0x50
? lock_release+0xc9/0x290
platform_device_add+0x24e/0x590
? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro]
meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro]
do_one_initcall+0xc0/0x450
? __pfx_do_one_initcall+0x10/0x10
? _raw_spin_unlock_irqrestore+0x2c/0x50
? __create_object+0x59/0x80
? kasan_unpoison+0x27/0x60
do_init_module+0x27b/0x7d0
? __pfx_do_init_module+0x10/0x10
? kasan_quarantine_put+0x84/0x1d0
? kfree+0x32c/0x510
? load_module+0x561e/0x5ff0
load_module+0x54fe/0x5ff0
? __pfx_load_module+0x10/0x10
? security_file_permission+0x20/0x40
? kernel_read_file+0x23d/0x6e0
? mmap_region+0x235/0x4a0
? __pfx_kernel_read_file+0x10/0x10
? __file_has_perm+0x2c0/0x3e0
init_module_from_file+0x158/0x180
? __pfx_init_module_from_file+0x10/0x10
? __lock_acquire+0x45a/0x1ba0
? idempotent_init_module+0x315/0x610
? lock_release+0xc9/0x290
? lockdep_init_map_type+0x4b/0x220
? do_raw_spin_unlock+0x53/0x220
idempotent_init_module+0x330/0x610
? __pfx_idempotent_init_module+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? ksys_mmap_pgoff+0x385/0x520
__x64_sys_finit_module+0xbe/0x120
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7d6d31690d
Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f3 b4 0f 00 f7 d8 >
RSP: 002b:00007fffc027ac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055f7b81967c0 RCX: 00007f7d6d31690d
RDX: 0000000000000000 RSI: 000055f79a0d6cd2 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000055f79a0d6cd2
R13: 000055f7b8196790 R14: 000055f79a0d5888 R15: 000055f7b81968e0
</TASK>
Fixes: 48fe583fe5 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
platform_get_resource and devm_ioremap effectively open codes this.
The return type of devm_platform_ioremap_resource() is also nice as it
has multiple errors that it can return.
Because it internally calls devm_request_mem_region(), reg values and
sizes cannot overlap. This was manually verified to be the case for all
talitos users.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The problem described in commit 655ef638a2 ("crypto: talitos - fix
SEC1 32k ahash request limitation") also apply for the SEC2 hardware,
but with a limitation of 64k - 1 bytes.
Split ahash_done() into SEC1 and SEC2 paths: SEC1 continues to free the
whole descriptor list at once, while SEC2 now iterates through
descriptors one by one, submitting the next only after the previous
completes, which is required since SEC2 cannot chain descriptors in
hardware.
Cc: stable@vger.kernel.org
Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ahash_process_req() was a wrapper used in commit 655ef638a2 ("crypto:
talitos - fix SEC1 32k ahash request limitation"). Rename
ahash_process_req_one() to ahash_process_req() and remove the wrapper.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In talitos_ahash_req_ctx and talitos_export_state, the fields
first_desc and last_desc describe request-level (not descriptor-level)
state. Rename them to first_request and last_request for clarity.
last_desc is also removed from talitos_ahash_req_ctx as it is no
longer used.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that SEC1 hash uses hardware descriptor chaining instead of a
workqueue to process requests exceeding TALITOS1_MAX_DATA_LEN, the
workqueue code is no longer needed.
Remove sec1_ahash_process_remaining(), the related fields from
talitos_ahash_req_ctx (request_bufsl, areq, request_sl,
remaining_ahash_request_bytes, current_ahash_request_bytes,
sec1_ahash_process_remaining), the dead code in ahash_done(), and
simplify ahash_process_req() to call ahash_process_req_one() directly
with the original areq->src and areq->nbytes.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
