memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison.
Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com
Fixes: 5033091de8 ("mm/hwpoison: introduce per-memory_block hwpoison counter")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Fix memory block leaks and locking", v2.
This series fixes two memory block device reference leaks and one locking
issue around the per-memory_block hwpoison counter.
This patch (of 2):
remove_memory_blocks_and_altmaps() looks up each memory block with
find_memory_block(), which acquires a reference to the memory block
device.
That reference is never dropped on this path, resulting in a leaked device
reference when removing memory blocks and their altmaps. Drop the
reference after retrieving mem->altmap and clearing mem->altmap, before
removing the memory block device.
Link: https://lore.kernel.org/20260428085219.1316047-1-songmuchun@bytedance.com
Link: https://lore.kernel.org/20260428085219.1316047-2-songmuchun@bytedance.com
Fixes: 6b8f0798b8 ("mm/memory_hotplug: split memmap_on_memory requests across memblocks")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Increase buffer size to accommodate machines with 64K PAGE_SIZE.
Link: https://lore.kernel.org/20260421070707.992873-1-lk@c--e.de
Fixes: 0913b75547 ("lib: kunit_iov_iter: add tests for extract_iter_to_sg")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reported-by: David Gow <davidgow@google.com>
Closes: https://lore.kernel.org/34a81ec2-af84-465d-9b5e-7bb5bf01680f@davidgow.net
Tested-by: David Gow <davidgow@google.com>
Tested-by: Josh Law <joshlaw48@gmail.com>
Reviewed-by: Josh Law <joshlaw48@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David]
Link: https://lore.kernel.org/20260421-zerotags-v2-1-05cb1035482e@kernel.org
Fixes: adfb6609c6 ("mm/huge_memory: initialise the tags of the huge zero folio")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20260428124833.1903302-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Baoquan He <baoquan.he@linux.dev>
Cc: Dave Young <ruirui.yang@linux.dev>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Destructive tests should be invoked with -d command-line option, but this
won't work today since 'd' is missing in getopts command-line. This
commit fixes it.
Link: https://lore.kernel.org/214fd9e4-5398-4c26-859e-c982c2e277c3@redhat.com
Fixes: f16ff3b692 ("selftests/mm: run_vmtests.sh: add missing tests")
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The commit 5ba6bc27b1 ("slab: decouple pointer to barn from
kmem_cache_node") reorganized the struct kmem_cache to factor out the
per-node fields to the new struct kmem_cache_per_node_ptrs. This causes
the gdb scripts for lx-slabinfo and lx-slabtrace fail as they still
reference the old structure.
Adjust the gdb scripts to match the current state of struct kmem_cache.
Link: https://lore.kernel.org/20260427142448.666117-3-illia@yshyn.com
Fixes: 5ba6bc27b1 ("slab: decouple pointer to barn from kmem_cache_node")
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Hao Li <hao.li@linux.dev>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Seongjun Hong <hsj0512@snu.ac.kr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The symbols phys_base, _text, and _end, used in x86_page_ops are either
defined in assembly or implicitly by the linker. Thus, they lack type
information and cause a conversion error after gdb.parse_and_eval.
Explicitly cast these expressions to unsigned long.
Link: https://lore.kernel.org/20260427142448.666117-2-illia@yshyn.com
Fixes: 55f8b4518d ("scripts/gdb: implement x86_page_ops in mm.py")
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: Hao Li <hao.li@linux.dev>
Cc: Harry Yoo <harry@kernel.org>
Cc: Seongjun Hong <hsj0512@snu.ac.kr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The print format is wrongly marking sz_applied as sz_tried. Fix it.
Link: https://lore.kernel.org/20260426193119.88095-1-sj@kernel.org
Fixes: 804c26b961 ("mm/damon/core: add trace point for damos stat per apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org> # 7.0.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without
calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix
the issue by calling mem_cgroup_iter_break() before the break.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260426173625.86521-1-sj@kernel.org
Link: https://lore.kernel.org/20260423004148.74722-1-sj@kernel.org [1]
Fixes: 29cbb9a13f ("mm/damon/sysfs-schemes: implement scheme filters")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path.
Link: https://lore.kernel.org/20260425133537.17463-1-nueralspacetech@gmail.com
Fixes: a30b48bf1b ("mm/migrate_device: implement THP migration of zone device pages")
Signed-off-by: Sunny Patel <nueralspacetech@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reset actions of the DEFZA adapters are exceedingly slow, taking up
to 30 seconds to complete by the device spec and typically in the range
of 10 seconds in reality, as required for the device RTOS to boot, still
quite a lot. Therefore a state machine is used that's interrupt driven,
however a safety mechanism is required in case of adapter malfunction,
so that if no state change interrupt has arrived in time, then the
situation is taken care of.
The safety mechanism depends on the origin of the reset. For regular
adapter initialisation at the device probe time a sleep is requested.
However a reset is also required by the device spec when the adapter has
transitioned into the halted state, such as in response to a PC Trace
event in the course of ring fault recovery, possibly a common network
event. In that case no sleep is possible as a device halt is reported
at the hardirq level.
A timer is therefore set up to ensure progress in case no adapter state
change interrupt has arrived in time, but as from commit 168f6b6ffb
("timers: Use del_timer_sync() even on UP") a warning is issued as the
timer is deleted in the hardirq handler upon an expected state change:
defza: v.1.1.4 Oct 6 2018 Maciej W. Rozycki
tc2: DEC FDDIcontroller 700 or 700-C at 0x18000000, irq 4
tc2: resetting the board...
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.0.0-dirty #2 VOLUNTARY
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 7070617773203a6d
0000000000000000 9800000002027ba4 0000000000001000 6465746e69617420
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff800ab7c0>] do_idle+0x40/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: OK
tc2: model 700 (DEFZA-AA), MMF PMD, address 08-00-2b-xx-xx-xx
tc2: ROM rev. 1.0, firmware rev. 1.2, RMC rev. A, SMT ver. 1
tc2: link unavailable
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W 7.0.0-dirty #2 VOLUNTARY
Tainted: [W]=WARN
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 0000000000000000
0000000000000000 9800000002027ba4 0000000000001000 0000000000000000
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff806de8a4>] arch_local_irq_disable+0x4/0x28
[<ffffffff800ab7d0>] do_idle+0x50/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: registered as fddi0
The immediate origin of the new warning is the switch away from aliasing
del_timer_sync() to del_timer() (timer_delete_sync() to timer_delete()
in terms of current function names) for UP configurations, which however
is the only choice for this driver anyway as no SMP hardware supports
the TURBOchannel bus this device interfaces to. Therefore there is a
very remote issue only this is a sign of.
Specifically if an adapter reset issued upon a transition to the halted
state times out and first triggers fza_reset_timer() for another reset
assertion, which then schedules fza_reset_timer() for reset deassertion
and then that second call is pre-empted after poking at the hardware,
but before the timer has been rearmed and owing to high system load
causing exceedingly high scheduling latency control is not handed back
before a transition to the uninitialised state has caused the timer to
be deleted even before it has been started, then fza_reset_timer() will
be called yet again and issue another reset even though by then the
adapter has already recovered.
Prevent this situation from happening by switching to timer_delete() for
the transition to the halted state and protect the code region affected
with a spinlock, also to make sure add_timer() has not been called twice
in a row due to an execution race between the interrupt handler and the
timer handler (though it could only happen on SMP, but let's keep the
driver clean). It's a very unlikely sequence of events to happen and
therefore there's no point in trying to be overly clever about it, such
as by placing printk() calls outside the protection. For the transition
to the uninitialised state switch to timer_delete_sync_try() instead, so
that a timer isn't deleted that's just been rearmed by the timer handler
and needs to watch for the device to come out of reset again (again, an
SMP scenario only).
Retain timer_delete_sync() invocations outside the hardirq context for a
stray timer not to fire once device structures have been released.
Fixes: 61414f5ec9 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is now understood how the watchdog can do its job without the need of
an interrupt. So, it is not required anymore but optional.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260507102410.43384-5-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In a VM, Linux panic information (reason for the panic, stack trace,
etc.) may be written to a serial console and/or a virtual frame buffer
for a graphics console. The latter may need to be flushed back to the
host hypervisor for display.
The current Hyper-V DRM driver for the frame buffer does the flushing
*after* the VMBus connection has been unloaded, such that panic messages
are not displayed on the graphics console. A user with a Hyper-V graphics
console is left with just a hung empty screen after a panic. The enhanced
control that DRM provides over the panic display in the graphics console
is similarly non-functional.
Commit 3671f37777 ("drm/hyperv: Add support for drm_panic") added
the Hyper-V DRM driver support to flush the virtual frame buffer. It
provided necessary functionality but did not handle the sequencing
problem with VMBus unload.
Fix the full problem by using VMBus functions to suppress the VMBus
unload that is normally done by the VMBus driver in the panic path. Then
after the frame buffer has been flushed, do the VMBus unload so that a
kdump kernel can start cleanly. As expected, CONFIG_DRM_PANIC must be
selected for these changes to have effect. As a side benefit, the
enhanced features of the DRM panic path are also functional.
Fixes: 3671f37777 ("drm/hyperv: Add support for drm_panic")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently, VMBus code initiates a VMBus unload in the panic path so
that if a kdump kernel is loaded, it can start fresh in setting up its
own VMBus connection. However, a driver for the VMBus virtual frame
buffer may need to flush dirty portions of the frame buffer back to
the Hyper-V host so that panic information is visible in the graphics
console. To support such flushing, provide exported functions for the
frame buffer driver to specify that the VMBus unload should not be
done by the VMBus driver, and to initiate the VMBus unload itself.
Together these allow a frame buffer driver to delay the VMBus unload
until after it has completed the flush.
Ideally, the VMBus driver could use its own panic-path callback to do
the unload after all frame buffer drivers have finished. But DRM frame
buffer drivers use the kmsg dump callback, and there are no callbacks
after that in the panic path. Hence this somewhat messy approach to
properly sequencing the frame buffer flush and the VMBus unload.
Fixes: 3671f37777 ("drm/hyperv: Add support for drm_panic")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Live-tree reconfiguration properties also carry raw values plus explicit
lengths. `of_reconfig_get_state_change()` currently treats `status`
property values as NUL-terminated strings and feeds them straight into
`strcmp()`.
Factor the `"okay"` / `"ok"` check out into a helper that first verifies
that the property contains a bounded C string within `prop->length`.
Malformed `status` updates should be treated as not enabling the node.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260507081812.91838-2-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
`populate_properties()` stores live-tree property values as raw byte
sequences plus a separate `length`. They are not globally guaranteed to
be NUL-terminated.
`of_prop_next_string()` iterates string-list properties by walking raw
bytes, `__of_node_is_type()` checks `device_type`,
`__of_device_is_status()` checks `status`, and
`of_alias_from_compatible()` reads the first `compatible` entry. These
paths must validate that the relevant string fits within the property
bounds before they hand it to C string helpers.
Validate these live-tree string properties within their declared bounds.
In particular, make `of_prop_next_string()` reject malformed entries
before returning them, keep the `device_type` check inside the existing
no-lock helper path, and add unit coverage for malformed first and
trailing string-list entries.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260507081812.91838-1-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tegra_i2c_mutex_unlock() returning an error that overwrites the transfer
result causes silent loss of I2C transfer errors. If the transfer failed
but the unlock succeeded, the error was lost and the function incorrectly
reported success.
Rather than propagating the unlock error (which is not actionable by the
caller - the I2C message may have been sent regardless), convert the
function to return void and WARN on the unexpected condition. If the
unlock fails, subsequent lock attempts will fail anyway, making the error
visible on the next transfer.
Fixes: 6077cfd716 ("i2c: tegra: Add support for SW mutex register")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Cc: <stable@vger.kernel.org> # v7.0+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260507221145.62183-3-sauravsc@amazon.com
If tegra_i2c_mutex_lock() fails, the function returns without calling
pm_runtime_put(), leaking the runtime PM reference acquired by the
preceding pm_runtime_get_sync(). This prevents the device from ever
entering runtime suspend.
Add the missing pm_runtime_put() before returning on lock failure.
Fixes: 6077cfd716 ("i2c: tegra: Add support for SW mutex register")
Signed-off-by: Saurav Sachidanand <sauravsc@amazon.com>
Cc: <stable@vger.kernel.org> # v7.0+
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260507221145.62183-2-sauravsc@amazon.com
If we pass a software node to a newly created device using struct
platform_device_info, it will not be removed when the device is
released. This may happen when a module creating the device is removed
or on failure in platform_device_add().
When we try to reuse that software node in a subsequent call to
platform_device_register_full(), it will fail with -EBUSY.
Provide a wrapper around the existing platform_device_release() that
additionally calls device_remove_software_node() and use it to replace
the former if we end up adding a software node.
While at it: check all three possible situations in which two software
nodes for a single platform device can be created/assigned in
platform_device_register_full() and bail-out early.
Fixes: 0fc434bc2c ("driver core: platform: allow attaching software nodes when creating devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-swnode-remove-on-dev-unreg-v6-1-f9c58939df27@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When using a temporary buffer to {de,en}crypt unaligned memory for debug,
allocate only the number of bytes that are needed instead of allocating an
entire page. The most common case for unaligned accesses will be reading
or writing less than 16 bytes.
Link: https://patch.msgid.link/20260501203537.2120074-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Wholesale rewrite the guts of the debug {de,en}crypt flows, as the existing
code is broken, e.g. doesn't handle cases where the access isn't naturally
sized and aligned, and is so wildly flawed that attempting to salvage the
current code in an iterative fashion would be more risky than a rewrite.
E.g. when encrypting 9 bytes at offset 8, KVM needs to _decrypt_
destination[31:0] into a temporary buffer, buffer[31:0], then copy 9 bytes
from source[8:0] to buffer[16:8], then encrypt buffer[31:0] back into
destination[31:0]. The current code only ever copies 16 bytes, and
bizarrely uses a temporary buffer for the source as well.
To keep the code easier to read and maintain, send the unaligned cases
down dedicated "slow" paths instead of trying to mix and match the possible
combinations in one helper.
For now, preserve the basic approach of the current code, e.g. allocate an
entire page for the temporary buffer, to minimize unwanted changes in
functionality.
Link: https://patch.msgid.link/20260501203537.2120074-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to pin/unpin a single page, and use it in all flows that pin
exactly one page. None of the single-page users actually check that the
correct number of pages was pinned, which is functionally ok, but visually
jarring, especially in the decrypt/encrypt flow, which separately pins two
pages, but uses a single variable to track how pages were pinned each time.
Again, it's functionally ok since core mm guarantees exactly one page will
be pinned on success, but it's ugly.
Opportunistically use page_to_phys() instead of open coding an equivalent
via page_to_pfn().
Note, all users of the single-page helper pre-validate the address and
length, i.e. don't rely on the sanity check in sev_pin_memory().
No functional change intended.
Link: https://patch.msgid.link/20260501203537.2120074-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When encrypting/decrypting guest memory, explicitly check that the
destination is non-NULL and doesn't wrap instead of subtly relying on
sev_pin_memory() to perform the check. This will allow adding and using
a more focused single-page pinning helper.
Link: https://patch.msgid.link/20260501203537.2120074-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a selftest to verify KVM's handling of {de,en}crypt debug ioctls,
specifically focusing on edge cases around the chunk (16 bytes) and page
(4096) sizes, where KVM had multiple bugs. E.g. KVM would fail to handle
small sizes that aren't naturally aligned and sized, would buffer overflow
if the destination was unaligned but the source was not, etc.
Attempt to strike a balance between an exhaustive test and a reasonable
runtime. On a system with both SEV and SEV-ES support, the current runtime
is under 45 seconds. Which isn't great, but it's tolerable, and it's not
obvious which of the combinations are "better" than the others.
Link: https://patch.msgid.link/20260501203537.2120074-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bulk is hardening of the new sub-scheduler infrastructure.
- UAFs and lifecycle bugs on the sub-sched attach/detach paths: parent
sub_kset freed under a racing child, list_del_rcu on an uninitialized
list head, ops->priv stomped by concurrent attach/detach, and a UAF in
the init-failure error path.
- Task state-machine reorg closing concurrent enable-vs-dead races: a
task exiting during the unlocked init window could trip NULL ops
derefs or skip exit_task() cleanup.
- A scx_link_sched() self-deadlock on scx_sched_lock.
- isolcpus: stop dereferencing the now-RCU-protected HK_TYPE_DOMAIN
cpumask without RCU, and stop rejecting BPF schedulers when only
cpuset isolated partitions are active.
- PREEMPT_RT: disable irq_work runs in hardirq context so dumps show the
failing task rather than the irq_work kthread.
- Assorted !CONFIG_EXT_SUB_SCHED, randconfig, and selftest build fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCagTk1g4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGT6TAP0ZbRHz9ViligecZXIHjEvZQjEV4sn1NLpGi4og
V0Ol2AD/RzqHQZo5+HpMz4hPrcZdkAWcr74cLrNTJ2WQjOk4RgE=
=6Mbx
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"The bulk of this is hardening of the new sub-scheduler infrastructure.
- UAFs and lifecycle bugs on the sub-sched attach/detach paths:
parent sub_kset freed under a racing child, list_del_rcu on an
uninitialized list head, ops->priv stomped by concurrent
attach/detach, and a UAF in the init-failure error path
- Task state-machine reorg closing concurrent enable-vs-dead races: a
task exiting during the unlocked init window could trip NULL ops
derefs or skip exit_task() cleanup
- A scx_link_sched() self-deadlock on scx_sched_lock
- isolcpus: stop dereferencing the now-RCU-protected HK_TYPE_DOMAIN
cpumask without RCU, and stop rejecting BPF schedulers when only
cpuset isolated partitions are active
- PREEMPT_RT: disable irq_work runs in hardirq context so dumps show
the failing task rather than the irq_work kthread
- Assorted !CONFIG_EXT_SUB_SCHED, randconfig, and selftest build
fixes"
* tag 'sched_ext-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use HK_TYPE_DOMAIN_BOOT to detect isolcpus= domain isolation
sched_ext: Defer sub_kset base put to scx_sched_free_rcu_work
sched_ext: INIT_LIST_HEAD() &sch->all in scx_alloc_and_add_sched()
sched_ext: Drop NONE early return in scx_disable_and_exit_task()
sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path
sched_ext: Clear ops->priv on scx_alloc_and_add_sched() error paths
sched_ext: Fix ops->priv clobber on concurrent attach/detach
selftests/sched_ext: Fix build error in dequeue selftest
sched_ext: Handle SCX_TASK_NONE in disable/switched_from paths
sched_ext: Close sub-sched init race with post-init DEAD recheck
sched_ext: Close root-enable vs sched_ext_dead() race with SCX_TASK_INIT_BEGIN
sched_ext: Replace SCX_TASK_OFF_TASKS flag with SCX_TASK_DEAD state
sched_ext: Inline scx_init_task() and move RESET_RUNNABLE_AT into scx_set_task_state()
sched_ext: Cleanups in preparation for the SCX_TASK_INIT_BEGIN/DEAD work
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize sch->disable_irq_work
sched_ext: Fix !CONFIG_EXT_SUB_SCHED build warnings
sched_ext: Drop unused scx_find_sub_sched() stub
sched_ext: Move scx_error() out of scx_link_sched()'s lock region
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
Convert the Texas Instruments DaVinci and Keystone I2C controller
bindings from legacy text format to modern dt-schema (YAML).
During the conversion, the `interrupts` property was made required
to match the strict requirement in the driver probe function. The
custom `ti,has-pfunc` and `power-domains` properties were also
properly defined to match SoC-specific hardware features.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260513123758.4955-1-chaitanya.msabnis@gmail.com
- cpuset fixes:
- Partition invalidation could return CPUs still in use by sibling
partitions, producing overlapping effective_cpus.
- cpuset_can_attach() over-reserved DL bandwidth on moves that stayed
within the same root domain.
- Pending DL migration state leaked into later attaches when a later
can_attach() check failed.
- Reorder PF_EXITING and __GFP_HARDWALL checks so dying tasks can
allocate from any node and exit quickly.
- dmem: propagate -ENOMEM instead of spinning forever when the fallback
pool allocation also fails.
- selftests/cgroup: percpu test error-path leak, bogus numeric
comparison of cpuset strings, and a zero-length read() that silently
passed OOM-kill tests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCagTkzw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGR+AAQCcYEGJ+yNAzzrTcY8xy7333rorMckSmZt18jzv
1KSqEQD+KjindGNcWP/meQBPnEjcBjix6i961mgnQ99e/UD2HQ4=
=4pT3
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- cpuset fixes:
- Partition invalidation could return CPUs still in use by sibling
partitions, producing overlapping effective_cpus
- cpuset_can_attach() over-reserved DL bandwidth on moves that
stayed within the same root domain
- Pending DL migration state leaked into later attaches when a
later can_attach() check failed
- Reorder PF_EXITING and __GFP_HARDWALL checks so dying tasks can
allocate from any node and exit quickly
- dmem: propagate -ENOMEM instead of spinning forever when the fallback
pool allocation also fails
- selftests/cgroup: percpu test error-path leak, bogus numeric
comparison of cpuset strings, and a zero-length read() that silently
passed OOM-kill tests
* tag 'cgroup-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Return only actually allocated CPUs during partition invalidation
selftests/cgroup: Fix error path leaks in test_percpu_basic
cgroup/cpuset: Reserve DL bandwidth only for root-domain moves
cgroup/cpuset: Reset DL migration state on can_attach() failure
selftests/cgroup: Fix string comparison in write_test
selftests/cgroup: Fix cg_read_strcmp() empty string comparison
cgroup/dmem: Return -ENOMEM on failed pool preallocation
cgroup/cpuset: move PF_EXITING check before __GFP_HARDWALL in cpuset_current_node_allowed()
- Plug a wq->cpu_pwq leak on the WQ_UNBOUND allocation failure path.
- Fix a cancel_delayed_work_sync() livelock against drain_workqueue()
caused by the drain/destroy reject path leaving WORK_STRUCT_PENDING set
with no owner.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCagTkwA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXGNAQDarHcCjUzjddPY1drGJz73LIsfAhU1haDWYQgD
Ssd/ZgD/fYP0Gp6GwbFF/n9JAo48Y2P29PF4lOfVagv1Md0SeAM=
=NMbR
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Plug a wq->cpu_pwq leak on the WQ_UNBOUND allocation failure path
- Fix a cancel_delayed_work_sync() livelock against drain_workqueue()
caused by the drain/destroy reject path leaving WORK_STRUCT_PENDING
set with no owner
* tag 'wq-for-7.1-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix wq->cpu_pwq leak in alloc_and_link_pwqs() WQ_UNBOUND path
workqueue: Release PENDING in __queue_work() drain/destroy reject path
Check the return value of kzalloc() to prevent a NULL pointer
dereference on allocation failure.
Fixes: 06cfbca0e1 ("drm/msm/a6xx: Share dependency vote table with GMU")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/721342/
Message-ID: <20260428073558.1234238-1-nichen@iscas.ac.cn>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Store the return value in the appropriate type and in case of error,
return it rather than WARNing.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Patchwork: https://patchwork.freedesktop.org/patch/719685/
Message-ID: <20260421-iommu_map_sgtable-return-v1-3-fb484c07d2a1@nvidia.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Preemption is enabled for gen8 as well.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/719256/
Message-ID: <20260418150847.157246-1-robin.clark@oss.qualcomm.com>
This got lost in the shuffle somehow when moving the vfunc table to
catalogue. Fixes inhibiting IFPC when userspace is collecting perfcntr
data.
Fixes: 491fadb2b8 ("drm/msm/adreno: Move adreno_gpu_func to catalogue")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/717780/
Message-ID: <20260411150312.257937-1-robin.clark@oss.qualcomm.com>
Before a5xx Adreno driver will not try fetching UBWC params (because
those generations didn't support UBWC anyway), however it's still
possible to query UBWC-related params from the userspace, triggering
possible NULL pointer dereference. Check for UBWC config in
adreno_get_param() and return sane defaults if there is none.
Fixes: a452510aad ("drm/msm/adreno: Switch to the common UBWC config struct")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/717778/
Message-ID: <20260411-adreno-fix-ubwc-v3-1-4983156f3f80@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d1:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Laratro <research@aradex.io>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d1:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing.
Fixes: b38f99c121 ("ksmbd: add procfs interface for runtime monitoring and statistics")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Laratro <research@aradex.io>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 299f962c0b ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak.
Fixes: 299f962c0b ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow")
Cc: stable@vger.kernel.org
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In a6xx_gpu_init(), node is obtained via of_parse_phandle().
While there was a manual of_node_put() at the end of the
common path, several early error returns would bypass this call,
resulting in a reference leak.
Fix this by using the __free(device_node) cleanup handler to
release the reference when the variable goes out of scope.
Fixes: 5a903a44a9 ("drm/msm/a6xx: Introduce GMU wrapper support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/700661/
Message-ID: <20260124-a6xx_gpu-v1-1-fa0c8b2dcfb1@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This adds base DT definition for zx297520v3 and one board that consumes it.
The stock kernel does not use the armv7 timer, but it seems to work
fine. The board has other board-specific timers that would need a driver
and I see no reason to bother with them since the arm standard timer
works.
The caveat is the non-standard GIC setup needed to handle the timer's
level-low PPI. This is the responsibility of the boot loader and
documented in Documentation/arch/arm/zte/zx297520v3.rst.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
---
Changes in
v8: Remove redundant label, use "arm,pl011" for uart0 and 2 too.
v6: Squash board + timer + uart patches into one
v5: Prepend the SoC name in the device specific DTS filename.
v4:
Declare all uarts
Remove the UART aliases for now. I can revisit this when I get my
hands on a board that exposes two UARTs.
This adds a new binding file for ZTE, containing their zx297520v3 SoC
and one board (D-Link DWR-932M) based on it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
---
Changelog:
v6:
Removed extra boards, I'll add them when submitting their individual
DTS files. Rephrase the subject to add "zte" and remove the redundant
use of "binding".
Moved the devicetree bindings patch ahead of the implementation patches.
Moved the MAINTAINERS section from "ZX29" to "ARM/ZTE".
Commit dc220915dd ("drm/msm: Fix GMEM_BASE for gen8") changed the
GMEM_BASE check from adreno_is_a650_family() & adreno_is_a740_family()
to family >= ADRENO_6XX_GEN4.
This inadvertently excluded A650 (ADRENO_6XX_GEN3), causing it to report
an incorrect GMEM_BASE which results in severe rendering corruption.
Update check to also include ADRENO_6XX_GEN3 to fix A650.
Fixes: dc220915dd ("drm/msm: Fix GMEM_BASE for gen8")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/711880/
Message-ID: <20260314-fix-gmem-base-a650-v1-1-3308f60cf74c@pm.me>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This SoC is used in low end LTE-to-WiFi routers, for example some D-Link
DWR 932 revisions, ZTE K10, ZLT S10 4G, but also models that are branded
and sold by ISPs themselves. They are widespread in Africa, China,
Russia and Eastern Europe.
This SoC is a relative of the zx296702 and zx296718 that had some
upstream support until commit 89d4f98ae9 ("ARM: remove zte zx
platform").
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
---
Patch changelog:
v8:
* Select ARM_PSCI_FW (Sashiko). This is an issue make defconfig pointed
out in the last patch in this series. The board does not have PSCI
firmware as far as I can tell, but the ARM_GIC_V3 option indirectly
assumes ARM_PSCI_FW is enabled.
* Include <linux/init.h> in the board file for __initdata (Sashiko),
removed other includes copypasted from another platform that aren't
needed. Let's see if Sashiko agrees.
* Add the SoC documentation to the documentation index (Sashiko)
* Add the SoC documentation to MAINTAINERS (Sashiko)
* Removed redundant if ARCH_ZTE (Sashiko)
* Point towards a sane (USB-Only) U-Boot and modify the example code for
booting from NAND to detect already fixed GIC setups.
VFIO_PCI_OFFSET_TO_INDEX() is used in several places with a signed
parameter (e.g. loff_t). Because it makes no sense for a BAR/resource
index to be negative, enforce this in the macro.
This fixes at least one current issue, where vfio_pci_ioeventfd() uses
this macro with an unvalidated signed loff_t returned into a signed
type, leading to a possible negative array access. This instance does
test against an out-of-bounds positive value, so treating the index as
unsigned fixes this issue.
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Signed-off-by: Matt Evans <mattev@meta.com>
Link: https://lore.kernel.org/r/20260511144642.2926799-1-mattev@meta.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
__hrtimer_start_range_ns() has a bool return type, but returns actually
three different values, which are checked at the call site.
Make the return type int.
Fixes: bd5956166d ("hrtimer: Provide hrtimer_start_range_ns_user()")
Reported-by: Dan Carpenter <error27@gmail.com
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
scx_enable() refuses to attach a BPF scheduler when isolcpus=domain is
in effect by comparing housekeeping_cpumask(HK_TYPE_DOMAIN) against
cpu_possible_mask.
Since commit 27c3a5967f ("sched/isolation: Convert housekeeping
cpumasks to rcu pointers"), HK_TYPE_DOMAIN's cpumask is RCU protected
and dereferencing it requires either RCU read lock, the cpu_hotplug
write lock, or the cpuset lock; scx_enable() holds none of these, so
booting with isolcpus=domain and attaching any BPF scheduler triggers
the following lockdep splat:
=============================
WARNING: suspicious RCU usage
-----------------------------
kernel/sched/isolation.c:60 suspicious rcu_dereference_check() usage!
1 lock held by scx_flash/281:
#0: ffffffff8379fce0 (update_mutex){+.+.}-{4:4}, at:
bpf_struct_ops_link_create+0x134/0x1c0
Call Trace:
dump_stack_lvl+0x6f/0xb0
lockdep_rcu_suspicious.cold+0x37/0x70
housekeeping_cpumask+0xcd/0xe0
scx_enable.isra.0+0x17/0x120
bpf_scx_reg+0x5e/0x80
bpf_struct_ops_link_create+0x151/0x1c0
__sys_bpf+0x1e4b/0x33c0
__x64_sys_bpf+0x21/0x30
do_syscall_64+0x117/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In addition, commit 03ff735101 ("cpuset: Update HK_TYPE_DOMAIN cpumask
from cpuset") made HK_TYPE_DOMAIN include cpuset isolated partitions as
well, which means the current check also rejects BPF schedulers when a
cpuset partition is active. That contradicts the original intent of
commit 9f391f94a1 ("sched_ext: Disallow loading BPF scheduler if
isolcpus= domain isolation is in effect"), which explicitly noted that
cpuset partitions are honored through per-task cpumasks and should not
be rejected.
Switch to housekeeping_enabled(HK_TYPE_DOMAIN_BOOT), which reads only
the housekeeping flag bit (no RCU dereference) and reflects exactly the
boot-time isolcpus= configuration that the error message refers to.
Fixes: 27c3a5967f ("sched/isolation: Convert housekeeping cpumasks to rcu pointers")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
vfio_pci_dma_buf_move(revoked=true) and vfio_pci_dma_buf_cleanup()
ran the same drain sequence: set priv->revoked, invalidate mappings,
wait for fences, drop the registered kref, wait for completion.
When the VFIO device fd was closed after PCI_COMMAND_MEMORY had been
cleared, both ran in turn -- the second kref_put underflowed and the
subsequent wait_for_completion() blocked on a completion that the
first run had already consumed:
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x59/0x90
Call Trace:
vfio_pci_dma_buf_cleanup+0x163/0x168 [vfio_pci_core]
vfio_pci_core_close_device+0x67/0xe0 [vfio_pci_core]
vfio_df_close+0x4c/0x80 [vfio]
vfio_df_group_close+0x36/0x80 [vfio]
vfio_device_fops_release+0x21/0x40 [vfio]
__fput+0xe6/0x2b0
__x64_sys_close+0x3d/0x80
Collapse the duplication: vfio_pci_dma_buf_cleanup() now delegates
the drain to vfio_pci_dma_buf_move(true), which is idempotent for
already-revoked dma-bufs. cleanup retains only list removal and
the device registration drop; the dma_resv_lock that bracketed
those is dropped along with the in-line drain that required it,
memory_lock continues to protect them.
Re-arm the kref and the completion at the end of move()'s revoke
branch so post-revoke state matches post-creation (kref == 1,
completion ready). This keeps cleanup's call into move() a no-op
when revoke already ran, and replaces the explicit kref_init() that
the un-revoke branch used to perform for the un-revoke -> remap
path.
Fixes: 1a8a5227f2 ("vfio: Wait for dma-buf invalidation to complete")
Reported-by: Joonas Kylmälä <joonas.kylmala@netum.fi>
Closes: https://lore.kernel.org/all/GVXPR02MB12019AA6014F27EF5D773E89BFB372@GVXPR02MB12019.eurprd02.prod.outlook.com/
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260507143548.1018405-1-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Just like for the extract user pages path, we need to align down the
size to the supported boundary.
Fixes: 8dd5e7c75d ("block: add helpers to bounce buffer an iov_iter into bios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260507050153.1298375-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When bouncing for block size > PAGE_SIZE file systems that require
file system block size alignment (e.g. zoned XFS), the bio needs to
be big enough to fit an entire block.
Fixes: 8dd5e7c75d ("block: add helpers to bounce buffer an iov_iter into bios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260507050153.1298375-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
