When a device is going down or when a net namespace is deleted, all
nexthops on it are removed, and for each nexthop being removed the FIB
table is flushed, which does a full trie traversal looking for entries
marked RTNH_F_DEAD and removing them. This is O(N x R), with N being
number of dev nexthops and R being number of IPv4 routes.
The RTNL is held the entire time.
When there are many nexthops to be removed and many routing entries,
this can result in the RTNL being held for multiple minutes, which
causes unhappiness in other processes trying to acquire the RTNL (e.g.
systemd-networkd for DHCP renewals).
In a complicated deployment with multiple vxlan devices, each having
16K nexthops and a total of 128K ipv4 routes, this is exactly what
happens:
nexthop_flush_dev() # loops over 16K nexthops
-> remove_nexthop()
-> __remove_nexthop()
-> __remove_nexthop_fib() # marks fi->fib_flags |= RTNH_F_DEAD
-> fib_flush() # for EACH nexthop!
-> fib_table_flush() # walks the ENTIRE FIB, 128K entries
This patch makes use of the previously added FIB flushing signal to only
do a single FIB flush after all nexthops to be removed are marked as
RTNH_F_DEAD:
- __remove_nexthop_fib() no longer flushes the FIB.
- nexthop_flush_dev() and flush_all_nexthops() now keep track whether
any nexthop was removed and trigger a FIB flush at the end.
- a new wrapper is defined, remove_one_nexthop() which calls
remove_nexthop() and flushes if necessary. This is intended for places
which must remove a single nexthop and shouldn't worry about the need
to trigger a FIB flush. For now, the only caller is rtm_del_nexthop().
- The two direct callers of __remove_nexthop() get a WARN_ON_ONCE, since
the nh about to be removed should not have any FIB entries referencing
it when replacing or inserting a new one.
This dramatically improves performance from O(N x R) to O(N + R).
Releasing a nexthop reference in remove_nexthop() now no longer frees
it. Instead, it is deleted when the last fib_info pointing to it gets
freed via free_fib_info_rcu(). All routing code is already careful not
to take into consideration routes marked with RTNH_F_DEAD.
Tested with:
DEV=eth2
ip link set up dev $DEV
ip link add testnh0 link $DEV type macvlan mode bridge
ip addr add 198.51.100.1/24 dev testnh0
ip link set testnh0 up
seq 1 65536 | \
sed 's/.*/nexthop add id & via 198.51.100.2 dev testnh0/' | \
ip -batch -
i=1
for a in $(seq 0 255); do
for b in $(seq 0 255); do
echo "route add 10.${a}.${b}.0/32 nhid $i"
i=$((i + 1))
done
done | ip -batch -
time ip link set testnh0 down
ip link del testnh0
Without this patch:
real 0m32.601s
user 0m0.000s
sys 0m32.511s
With this patch:
real 0m0.209s
user 0m0.000s
sys 0m0.153s
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-3-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Plumb a bool value throughout the various nexthop removal functions,
determined in the innermost __remove_nexthop_fib() (which still does the
FIB flushing) and propagated up all callers.
The next patch will make use of this signal to optimize the removal of
multiple nexthops by moving the FIB flushing up the call hierarchy.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-2-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: convert four more protocols to getsockopt_iter
Continue the work to convert protocols to the new getsockopt_iter API.
Convert four additional getsockopt implementations to the new
sockopt_t/getsockopt_iter callback:
- MCTP
- LLC
- X.25
- KCM
These are mechanical, ABI-preserving conversions following the same
pattern as the previously converted protocols (af_packet, can/raw,
af_netlink, af_vsock): the (char __user *optval, int __user *optlen)
pair is replaced with a single sockopt_t *opt that carries the buffer
length on input and the returned size on output, and exposes an iov_iter
for the copy-out path. put_user()/copy_to_user() pairs are replaced with
a single copy_to_iter() per option, and the wrapper in
do_sock_getsockopt() handles writing optlen back to userspace.
I picked these four because each is small and self-contained.
====================
Link: https://patch.msgid.link/20260507-getsock_two-v2-0-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apply two cleanups suggested by Stanislav and bobby on the original
selftest series:
- Reorder local variable declarations into reverse christmas-tree
order (longest line first). Because that ordering puts socklen_t
optlen before the variable whose size it stores, the
"optlen = sizeof(...)" initializer is moved out of the declaration
to a plain assignment in the test body, as Stanislav suggested.
- Add ASSERT_EQ(optlen, ...) on every error path so the value the
kernel writes back to the userspace optlen is pinned down even
when the syscall returns -1. With do_sock_getsockopt() now writing
opt->optlen back to userspace unconditionally, asserting that the
netlink/vsock error paths leave the original input length untouched
guards against future regressions.
Bobby Eshleman pointed out that
SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW/OLD return a sock_timeval-shaped
payload (16 bytes on 64-bit), which is wider than the u64 case
already covered. Add four tests that exercise this path:
- connect_timeout_new_exact exact-size buffer
- connect_timeout_new_oversize_clamped oversize buffer, clamped
- connect_timeout_new_undersize undersize -> -EINVAL, optlen
untouched
- connect_timeout_old_exact exact-size buffer for OLD optname
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Suggested-by: Bobby Eshleman <bobbyeshleman@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-5-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert KCM socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-4-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert X.25 socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-3-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert LLC socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-2-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert MCTP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input)
- Use copy_to_iter() instead of copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-1-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DW IP has two distinct PCS address ranges cooresponding
to the C45 PCS registers.
The shim translates the PCS addr/regno into specific CSR writes
into one of those two zero-relative ranges.
This patch fixes a one off in the test that could allow an invalid
CSR write if an addr == 2 was called.
There are is of yet, no real impact for the bug as no PCS writes are
present.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260507154203.3667-1-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=JP6m
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
Link: https://patch.msgid.link/20260508154314.12817-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The channels were described in reverse format, i.e. RGBA instead of ABGR
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
CC: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260503235327.92428-1-robert.ancell@canonical.com
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely.
Fixes: 1e33e1414b ("nfsd: allow layout state to be admin-revoked.")
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sunrpc_cache_requests_snapshot() filters requests with
crq->seqno <= min_seqno. The min_seqno for the first netlink
dump call is cb->args[0] which is 0. Since next_seqno was
initialized to 0, the very first cache request got seqno=0
and was silently skipped by the snapshot (0 <= 0 is true).
This caused netlink-based GET_REQS to return 0 pending requests
even when a request was queued, preventing mountd from resolving
cache entries (particularly expkey/nfsd.fh). The unresolved
CACHE_PENDING state blocked all further notifications for the
entry, leading to permanent NFS4ERR_DELAY hangs.
Start next_seqno at 1 so all requests have seqno >= 1 and pass
the snapshot filter when min_seqno is 0.
Fixes: facc4e3c80 ("sunrpc: split cache_detail queue into request and reader lists")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When delegated attributes are given on open, the file is opened with
NOCMTIME and modifying operations do not update mtime/ctime as to not get
out-of-sync with the client's delegated view. However, for COPY operation,
the server should update its view of mtime/ctime and reflect that in any
GETATTR queries.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When delegated attributes are given on open, the file is opened with
NOCMTIME and modifying operations do not update mtime/ctime as to not get
out-of-sync with the client's delegated view. However, for CLONE operation,
the server should update its view of mtime/ctime and reflect that in any
GETATTR queries.
Fixes: e5e9b24ab8 ("nfsd: freeze c/mtime updates with outstanding WRITE_ATTRS delegation")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 8881, section 10.4.3 doesn't say anything about caching the file
size in the delegation record, nor does it say anything about comparing
a cached file size with the size reported by the client in the
CB_GETATTR reply for the purpose of determining if the client holds
modified data for the file.
What section 10.4.3 of RFC 8881 does say is that the server should
compare the *current* file size with the size reported by the client
holding the delegation in the CB_GETATTR reply, and if they differ to
treat it as a modification regardless of the change attribute retrieved
via the CB_GETATTR.
Doing otherwise would cause the server to believe the client holding the
delegation has a modified version of the file, even if the client
flushed the modifications to the server prior to the CB_GETATTR. This
would have the added side effect of subsequent CB_GETATTRs causing
updates to the mtime, ctime, and change attribute even if the client
holding the delegation makes no further updates to the file.
Modify nfsd4_deleg_getattr_conflict() to obtain the current file size
via i_size_read(). Retain the ncf_cur_fsize field, since it's a
convenient way to return the file size back to nfsd4_encode_fattr4(),
but don't use it for the purpose of detecting file changes. Remove the
unnecessary initialization of ncf_cur_fsize in nfs4_open_delegation().
Also, if we recall the delegation (because the client didn't respond to
the CB_GETATTR), then skip the logic that checks the nfs4_cb_fattr
fields.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Cc: stable@vger.kernel.org
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
ethtool.h includes linux/typelimits.h which is a relatively new header
not yet shipped in most distro kernel-header packages. Without the
explicit entry, the build silently falls through to -idirafter.
dev_energymodel.h is a new YNL family whose uapi header is not in
system paths at all and was missing a CFLAGS entry entirely.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260508204114.205896-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, it was overlooked that the watchdog could reset the system
directly. So, a workaround using the interrupt which called
emergency_restart() was implemented. We now configure the controller
when booting properly to allow watchdog resets directly. Thus, remove
the interrupt workaround.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20260507102410.43384-4-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The RK3528 uses the same watchdog block as all previous Rockchip SoCs.
So add a compatible for it to the soc-list.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260506092420.3320031-1-heiko@sntech.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. We could simply remove the dependency but in order to avoid
a new symbol popping up for everyone in make config - just convert it to
requiring CONFIG_OF.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506081600.4921-1-bartosz.golaszewski@oss.qualcomm.com
[groeck: Resolved conflict; updated dependencies to require OF _or_ ACPI]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
AMD Elan support was removed from the upstream kernel with commit
8b793a92d8 ("x86/cpu: Remove M486/M486SX/ELAN support"). Its
watchdog driver can no longer be enabled except for test builds.
Remove it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
`wdt.rst` is only about the Watchdog from "Industrial Computer Source"
(ICS). Change the title and rename the file to better express this.
Add missing SPDX license identifier `GPL-2.0-or-later` same as code to
silence `checkpatch`.
Fix wrong link to sample driver in drivers/watchdog/smsc37b787_wdt.c.
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Link: https://lore.kernel.org/r/5a71979d8e8ab8e0a30de33f6aa2540b3b5dc1ee.1777972790.git.phahn-oss@avm.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Lenovo SE10 Gen 2 platform uses a watchdog chip from the same family.
Watchdog functionality is the same, so update the driver with the new chip
ID.
Add the Gen 2 MTM's to enable support on the platform.
Tested on SE10 G2.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20260428124954.1193450-1-mpearson-lenovo@squebb.ca
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Andes ATCWDT200 watchdog timer. The driver implements
programmable reset and interrupt timers, and includes automatic detection
of the supported IntTime bit-width.
Integrated with the Linux watchdog framework, it supports basic operations
including start, stop, ping, timeout configuration, and system reset via
the restart handler.
Signed-off-by: CL Wang <cl634@andestech.com>
Link: https://lore.kernel.org/r/20260115081444.2452357-3-cl634@andestech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the devicetree binding documentation for the Andes ATCWDT200
watchdog timer.
ATCWDT200 is the IP name, which is embedded in AndesCore-based
platforms or SoCs such as AE350 and Qilai.
Signed-off-by: CL Wang <cl634@andestech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260115081444.2452357-2-cl634@andestech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
AT91_WDT_WDDIS (bit 15) applies to SAMA5/AT91SAM9261 and
AT91_SAM9X60_WDDIS (bit 12) to SAM9X60/SAMA7G5/SAM9X75. Update
comments to reflect this and add SAMA7G5 and SAM9X75 datasheet
references to the file header.
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20260302113310.133989-3-balakrishnan.s@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On i.MX94, watchdog sources clock from bus clock that will be always on
during the lifecycle of Linux. There is a Low Power Clock Gating(LPCG)
between the bus clock and watchdog, but the LPCG is not exported for
software to control, it is hardware automatically controlled. When
Cortex-A55 executes WFI during suspend flow, the LPCG will automatically
gate off the clock to stop watchdog and resume clock when Cortex-A55 is
woke up.
So watchdog could always be alive to protect Linux, except Cortex-A
platform WFI is executed in Linux suspend flow.
Introduce a new hardware feature flag to indicate CPU low-power-mode
auto clock gating support, and use it to avoid stopping the watchdog
during suspend when LPCG can safely keep it running.
Add i.MX94-specific watchdog hardware data and DT compatible entry to
enable this behavior.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
[peng.fan@nxp.com: rewrite commit log for clarity]
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20260206-imx94-wdog-v2-1-4dd725faec1f@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This configures the reaction between NMI and reset for WWD.
On K3 SoCs other than AM62L SoC [0], watchdog reset output is routed
to the ESM module which can subsequently route the signal to safety
master or SoC reset. On AM62L, the watchdog reset output is routed
to the SoC HW reset block. So, add a new compatible for AM62L to add
SoC data and configure reaction to reset instead of NMI.
[0] https://www.ti.com/product/AM62L
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260206234255.380530-3-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver currently only supports builds against a PIC32 target, or
with COMPILE_TEST on MIPS. Now that commit 0f8a61ca78 ("watchdog:
pic32-dmt: update include to use pic32.h from platform_data") is merged,
it's possible to compile this driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260222-watchdog-pic32-v1-2-a2538aa528d1@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver currently only supports builds against a PIC32 target, or
with COMPILE_TEST on MIPS. Now that commit 5aa5879eee ("watchdog:
pic32-wdt: update include to use pic32.h from platform_data") is merged,
it's possible to compile this driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260222-watchdog-pic32-v1-1-a2538aa528d1@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
The rx51 driver relies on the machine_is_nokia_rx51() macro, which was
used with the legacy board file dropped in commit 9b7141d01a ("ARM:
OMAP2+: Drop legacy board file for n900"). The use of this macro
prevents the removal of machine IDs no longer used by the kernel from
arch/arm/tools/mach-types, because the machine_is_*() macros are
generated from mach-types. Drop this unused code.
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # v1
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://patch.msgid.link/20260510054214.564950-1-enelsonmoore@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While reading some docs, I have found some minor
misspelled words and some parts that could be improved.
The ASoC USB documentation refers to the USB DPCM backend link as DCPM
in two places. The ASoC platform documentation still points readers to
the old DPCM.txt name. The ALSA configuration guide also has two
references that omit their current subdirectory.
Fix a few stale and misspelled references in the ALSA and ASoC
documentation and update the references and fix a typo in the ASoC index.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260508-asoc-doc-fixes-v1-1-b53eec42e340@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The omap3pandora driver contains a check for the ARM machine ID via the
machine_is_omap3_pandora() macro. The board concerned now supports
only FDT booting, which does not use machine IDs, and therefore the
code should be updated to check the DT compatible property instead. The
legacy board file for this machine was removed in commit 7fcf7e061e
("ARM: OMAP2+: Remove legacy booting support for Pandora").
The presence of this machine ID check prevents the removal of machine
IDs no longer used by the kernel from arch/arm/tools/mach-types,
because the machine_is_*() macros are generated from mach-types. To
resolve this issue, use of_machine_is_compatible() instead.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move SPEC_CTRL handling for VMX entirely to vmenter.S, also improving
assembly code reuse between SVM and VMX.
The prototype of __vmx_vcpu_run() and __svm_vcpu_run() becomes
the same, with a set of bit flags for the second argument.
The register allocation also becomes very similar, with %edi/%rdi
pointing to the vmx (resp. svm) argument.
Thanks to this, the code to save and restore SPEC_CTRL values for the
host and guest is the same up to the register names and can be dropped
into a new header arch/x86/kvm/vmenter.h. APX enablement will also move
common code to load and save registers from VMX and SVM to vmenter.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This topic branch introduces support for two related features that
Hyper-V uses in its implementation of Virtual Secure Mode; these are
Intel Mode-Based Execute Control and AMD Guest Mode Execution Trap.
Both MBEC and GMET allow more granular control over execute permissions,
with different levels of separation between supervisor and user mode.
MBEC provides support for separate supervisor and user-mode bits in the
PTEs; GMET instead lacks supervisor-mode only execution (with NX=0,
"both" is represented by U=0 and user-mode only by U=1). GMET was
clearly inspired by SMEP though with some differences and annoyances.
The implementation starts from two changes to core MMU code, both
of which help making the actual feature almost trivial to implement:
- first, I'm cleaning up the implementation of nVMX exec-only, by
properly adding read permissions to the ACC_* constant and to the
permission bitmask machinery. Jon also had to add a fourth ACC_*
bit, but used it only in the special case of nested MBEC; here
instead ACC_READ_MASK is the normality, which simplifies testing
a lot and removes gratuitous complexity.
- second, I'm enforcing that KVM runs with MBEC/GMET enabled even in
non-nested mode, if it wants to provide the feature to nested
hypervisors. This makes the creation of SPTEs looks exactly the
same for L1 and L2 guests, despite only the latter using MBEC/GMET
fully; the difference lies only in the input access permissions.
This strategy adds a limited amount of complexity to the core is limited,
while providing for an almost entirely seamless support of nested
hypervisors.
Later patches have to use slightly different meanings for ACC_* in Intel
and AMD. On the Intel side, some work is needed in order to split
shadow_x_mask and ACC_EXEC_MASK in two; now that there is an actual
ACC_READ_MASK to be used for exec-only pages, ACC_USER_MASK is unused
and can be reused as ACC_USER_EXEC_MASK. However, unlike the older
ACC_USER_MASK hack these differences are backed by concrete concepts
of the page table format, and there is always a 1:1 mapping from ACC_*
bits to PT_*_MASK or shadow_*_mask:
Intel AMD
-------------------- ------------------- -------------------
ACC_READ_MASK PT_PRESENT_MASK PT_PRESENT_MASK
ACC_WRITE_MASK PT_WRITABLE_MASK PT_WRITABLE_MASK
ACC_EXEC_MASK shadow_xs_mask shadow_nx_mask
ACC_USER_MASK --- shadow_user_mask
ACC_USER_EXEC_MASK shadow_xu_mask ---
On Intel, ACC_EXEC_MASK is used for kernel-mode execution and is tied to
shadow_xs_mask (when MBEC is disabled, ACC_USER_EXEC_MASK and the XU bit
are computed but ineffective). update_permission_bitmask() precomputes
all the necessary conditions. On the AMD side, the U bit maps to
ACC_USER_MASK but nNPT adjusts the permission bitmask to ignore it for
reads and writes when GMET is active. Despite the smaller scale of the
changes compared to MBEC, there are some changes to make to use GMET
for L1 guests, because the page tables have to be created with U=0.
This means that the root page has role.access != ACC_ALL and its
permissions have to be propagated down.
Note that with MBEC the user/supervisor distinction depends on the U
bit of the page tables rather than the CPL. Processors provide this
information to the hypervisor through the "advanced EPT violation
vmexit info" feature, which is a requirement for KVM to use MBEC,
and kvm-intel.ko passes it to the MMU in PFERR_USER_MASK (unlike
kvm-amd.ko which computes it from the CPL). This needs a small change
to pass the effective XWU permissions of the page tables down to
translate_nested_gpa().
The former "smep_andnot_wp" bit of cpu_role.base, now named "cr4_smep",
is repurposed for nested TDP to indicate that MBEC/GMET is on. The minor
pessimization for shadow page tables (toggling CR4.SMEP now always forces
building a separate version of the shadow page tables, even though that's
technically unnecessary if CR4.WP=1) is not really worth fretting about;
in practice, guests are not going to flip CR4.SMEP in a way that would
prevent efficient reuse of shadow page tables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All that needs to be done is moving the GMET bit from vmcb12 to vmcb02.
The only new thing is that __nested_copy_vmcb_control_to_cache now
ensures that ignored-if-unavailable bits are zero in svm->nested.ctl.
Tested-by: David Riley <d.riley@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to AMD, the hypervisor may not be able to determine whether a
fault was a GMET fault or an NX fault based on EXITINFO1, and software
"must read the relevant VMCB to determine whether a fault was a GMET
fault or an NX fault". The APM further details that they meant the
CPL field.
KVM uses the page fault error code to distinguish the causes of a
nested page fault, so recalculate the PFERR_USER_MASK bit of the
vmexit information. Only do it for fetches and only if GMET is in
use, because KVM does not differentiate based on PFERR_USER_MASK
for other nested NPT page faults.
Tested-by: David Riley <d.riley@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set the GMET bit in the nested control field. This has effectively
no impact as long as NPT page tables are changed to have U=0.
Tested-by: David Riley <d.riley@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
