CSR boot stage register bit 12 is documented as a device warning,
not a fatal error. Rename the bit definition accordingly and stop
including it in btintel_pcie_in_error().
This keeps warning-only boot stage values from being classified as
errors while preserving abort-handler state as the actual error
condition.
Fixes: 190377500f ("Bluetooth: btintel_pcie: Dump debug registers on error")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 80808e431e ("Bluetooth: Add l2cap_chan_ops abstraction")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 8d836d71e2 ("Bluetooth: Access sk_sndtimeo indirectly in l2cap_core.c")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 89bc500e41 ("Bluetooth: Add state tracking to struct l2cap_chan")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a BLE peripheral sends an L2CAP Connection Parameter Update Request
the processing path is:
process_pending_rx() [takes conn->lock]
l2cap_le_sig_channel()
l2cap_conn_param_update_req()
hci_le_conn_update() [takes hdev->lock]
Meanwhile other code paths take the locks in the opposite order:
l2cap_chan_connect() [takes hdev->lock]
...
mutex_lock(&conn->lock)
l2cap_conn_ready() [hdev->lock via hci_cb_list_lock]
...
mutex_lock(&conn->lock)
This is a classic AB/BA deadlock which lockdep reports as a circular
locking dependency when connecting a BLE MIDI keyboard (Carry-On FC-49).
Fix this by making hci_le_conn_update() defer the HCI command through
hci_cmd_sync_queue() so it no longer needs to take hdev->lock in the
caller context. The sync callback uses __hci_cmd_sync_status_sk() to
wait for the HCI_EV_LE_CONN_UPDATE_COMPLETE event, then updates the
stored connection parameters (hci_conn_params) and notifies userspace
(mgmt_new_conn_param) only after the controller has confirmed the update.
A reference on hci_conn is held via hci_conn_get()/hci_conn_put() for
the lifetime of the queued work to prevent use-after-free, and
hci_conn_valid() is checked before proceeding in case the connection was
removed while the work was pending. The hci_dev_lock is held across
hci_conn_valid() and all conn field accesses to prevent a concurrent
disconnect from invalidating the connection mid-use.
Fixes: f044eb0524 ("Bluetooth: Store latency and supervision timeout in connection params")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The L2CAP specification states that if more than one channel is being
reconfigured, the MPS shall not be decreased. The current check has
two issues:
1) The comparison uses >= (greater-than-or-equal), which incorrectly
rejects reconfiguration requests where the MPS stays the same.
Since the spec says MPS "shall be greater than or equal to the
current MPS", only a strict decrease (remote_mps > mps) should be
rejected. Keeping the same MPS is valid.
2) The multi-channel guard uses `&& i` (loop index) to approximate
"more than one channel", but this incorrectly allows MPS decrease
for the first channel (i==0) even when multiple channels are being
reconfigured. Replace with `&& num_scid > 1` which correctly
checks whether the request covers more than one channel.
Fixes: 7accb1c432 ("Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In bnep_rx_frame(), the BNEP_FILTER_NET_TYPE_SET and
BNEP_FILTER_MULTI_ADDR_SET extension header parsing has two bugs:
1) The 2-byte length field is read with *(u16 *)(skb->data + 1), which
performs a native-endian read. The BNEP protocol specifies this field
in big-endian (network byte order), and the same file correctly uses
get_unaligned_be16() for the identical fields in
bnep_ctrl_set_netfilter() and bnep_ctrl_set_mcfilter().
2) The length is multiplied by 2, but unlike BNEP_SETUP_CONN_REQ where
the length byte counts UUID pairs (requiring * 2 for two UUIDs per
entry), the filter extension length field already represents the total
data size in bytes. This is confirmed by bnep_ctrl_set_netfilter()
which reads the same field as a byte count and divides by 4 to get
the number of filter entries.
The bogus * 2 means skb_pull advances twice as far as it should,
either dropping valid data from the next header or causing the pull
to fail entirely when the doubled length exceeds the remaining skb.
Fix by splitting the pull into two steps: first use skb_pull_data() to
safely pull and validate the 3-byte fixed header (ctrl type + length),
then pull the variable-length data using the properly decoded length.
Fixes: bf8b9a9cb7 ("Bluetooth: bnep: Add support to extended headers of control frames")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly.
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Cc: stable@vger.kernel.org
Signed-off-by: ZhiTao Ou <hkbinbinbin@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del().
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Cc: stable@vger.kernel.org
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_conn_ready calls sleeping functions under conn->lock spinlock.
The critical section can be reduced: conn->hcon is modified only with
hdev->lock held. It is guaranteed to be held in sco_conn_ready, so
conn->lock is not needed to guard it.
Move taking conn->lock after lock_sock(parent). This also follows the
lock ordering lock_sock() > conn->lock elsewhere in the file.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Raspberry Pi firmware driver has no compile dependencies on the
BCM2835 mailbox driver. It's just a indirect runtime dependency: the
driver only works on a Raspberry Pi.
Change the dependency from BCM2835_MBOX to ARCH_BCM2835. Also allow
compile tests. This allows drivers that have build time dependencies
on this firmware driver to be compile tested as well. More dependencies
are added to account for build time dependencies:
- depends on MAILBOX for mailbox API (not stubbed) usage
- depends on ARM || ARM64 for dsb() usage
Also make it built by default if ARCH_BCM2835, since many functions will
not work without this firmware driver.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20260427091058.2669812-1-wenst@chromium.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Merge the separate early_initcall and arch_initcall functions into a
single early_initcall. This is possible thanks to commit 6e12db376b
("base: soc: Allow early registration of a single SoC device"), which
allows soc_device_register() to be called during early_initcall by
deferring the actual registration until the soc_bus is ready.
Replace static family_id/product_id variables with a dynamically
allocated brcmstb_soc_info structure.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20260325174619.3761964-1-justin.chen@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fix __xe_pin_fb_vma_ggtt() to actually respect the GGTT alignment
specified by the display code. Misalignment can cause GTT faults
etc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260430154602.11393-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Instead of just looking at the first plane use the fb cached overall
minimum alignment.
This aligns with how the i915 version of intel_plane_pin_fb works.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
[vsyrjala: Rebase due to pin_params]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260430154602.11393-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
The main SoC TLMM (Top-Level Multiplexer) pin controller drivers are
essential for booting up SoCs and are not really optional for a given
platform. Kernel should not ask users choice of drivers when that
choice is obvious and known to the developers that answer should be
'yes' or 'module'.
Switch all Qualcomm TLMM pin controller drivers to a default 'yes' for
ARCH_QCOM. This has impact:
1. arm64 defconfig: enable PINCTRL_SM7150, PINCTRL_IPQ9650 and
PINCTRL_HAWI, which were not selected before but should be, because
these platforms need them for proper boot.
2. arm qcom_defconfig: no changes.
3. arm multi_v7 defconfig: enable drivers necessary to boot ARM 32-bit
platforms, which are already enabled on qcom_defconfig.
4. COMPILE_TEST builds: enable by default all drivers for arm or arm64
builds, whenever ARCH_QCOM is selected. This has impact on build
time and feels logical, because if one selects ARCH_QCOM then
probably by default wants to build test it entirely. Kernels with
COMPILE_TEST are not supposed to be used for booting.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[linusw@kernel.org: Split off the defconfig changes to a separate patch]
Signed-off-by: Linus Walleij <linusw@kernel.org>
The main SoC TLMM (Top-Level Multiplexer) pin controller drivers are
essential for booting up SoCs and are not really optional for a given
platform. Kernel should not ask users choice of drivers when that
choice is obvious and known to the developers that answer should be
'yes' or 'module'.
Switch all Qualcomm TLMM pin controller drivers to a default 'yes' for
ARCH_QCOM. This has impact:
1. arm64 defconfig: enable PINCTRL_SM7150, PINCTRL_IPQ9650 and
PINCTRL_HAWI, which were not selected before but should be, because
these platforms need them for proper boot.
2. arm qcom_defconfig: no changes.
3. arm multi_v7 defconfig: enable drivers necessary to boot ARM 32-bit
platforms, which are already enabled on qcom_defconfig.
4. COMPILE_TEST builds: enable by default all drivers for arm or arm64
builds, whenever ARCH_QCOM is selected. This has impact on build
time and feels logical, because if one selects ARCH_QCOM then
probably by default wants to build test it entirely. Kernels with
COMPILE_TEST are not supposed to be used for booting.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[linusw@kernel.org: split off defconfig changes to its own patch]
Signed-off-by: Linus Walleij <linusw@kernel.org>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the pin controller drivers already have this correctly placed,
so adjust the other drivers. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the pin controller drivers already have this correctly placed,
so adjust the other drivers. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Some Qualcomm pin controller drivers already have this correctly placed,
so adjust the other drivers. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Qualcomm TLMM-based pin controllers share the same gpio-hog binding
semantics across multiple SoCs. The gpio-hog pattern currently defined in
qcom,ipq4019-pinctrl.yaml and qcom,sdm845-pinctrl.yaml are not SOC specific
and applies to all TLMM controllers.
Move the gpio-hog patternProperties definition to qcom,tlmm-common.yaml so
that it can be reused by other Qualcomm TLMM pinctrl bindings and avoid
schema duplication.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use a flexible array member to combine allocations and simplify code
slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[linusw@kernel.org: add a counter and __counted_by() annotation]
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
While Ingenic is a 32-bit platform, it is still better to use the
correct type, to serve as an example.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On 64-bit platforms, "unsigned long" is 64-bit. Hence checking if all
"unsigned long" configuration values are equal should be done using an
"unsigned long" temporary.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the pin controller block on SM6350 Low Power Island.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
[linusw@kernel.org: fixed up Kconfig entry]
Signed-off-by: Linus Walleij <linusw@kernel.org>
On some platforms like SM6350 (Bitra), some pins have their slew
controlled with the SPARE_1 register. Add support for that.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Remove SDC_QDSD_PINGROUP, QUP_I3C and UFS_RESET macros as on some
platforms they are unused.
No functional impact.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver includes the legacy GPIO header <linux/gpio.h> but does not use
any symbols from it and actually wants <linux/gpio/consumer.h>, so fix this
up.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260506084858.867884-2-andriy.shevchenko@linux.intel.com
Define interrupts properly. Unfortunately, this hides a bug in the linux
driver, so it needs to be used with the driver fixed only.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251231-mpu9150-v1-2-08ecf085c4ae@kernel.org
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
The software controller requires that there is one MBM counter per monitor
group that is assigned to the event backing the software controller, as per
mba_MBps_event. When mbm_event mode is in use, it is not guaranteed that any
particular event will have an assigned counter.
Currently, only AMD systems support counter assignment, but the MBA delay
is non-linear and so the software controller is never supported anyway. On
MPAM systems, the MBA delay is linear and so the software controller could
be supported. The MPAM driver, unless a need arises, will not support the
'default' mbm_assign_mode and will always use the 'mbm_event' mode for
memory bandwidth monitoring.
Rather than develop a way to guarantee the counter assignment requirements
needed by the software controller, take the pragmatic approach. Don't allow
the software controller to be used at the same time as 'mbm_event' mode. As
MPAM is the only relevant architecture and it will use 'mbm_event' mode
whenever there are assignable MBM counters, for simplicity's sake, don't
allow the software controller when the MBM counters are assignable.
Implement this by failing the mount if the user requests the software
controller, the mba_MBps option, and the MBM counters are assignable.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
When the counter assignment mode is mbm_event resctrl assumes the MBM
events are configurable and exposes the 'event_filter' files. These files
live at info/L3_MON/event_configs/<event>/event_filter and are used to
display and set the event configuration.
The MPAM architecture has support for configuring the memory bandwidth
utilization (MBWU) counters to only count reads or only count
writes. However, in MPAM, this event filtering support is optional in the
hardware (and not yet implemented in the MPAM driver) but MBM counter
assignment is always possible for MPAM MBWU counters.
In order to support mbm_event mode with MPAM, create the 'event_filter'
files read only if the event configuration can't be changed. A user can
still chmod the file and so also return early with an error from
event_filter_write().
Introduce a new monitor property, mbm_cntr_configurable, to indicate
whether or not assignable MBM counters are configurable. On x86, set this
to true whenever mbm_cntr_assignable is true to keep existing behaviour.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
The error path in resctrl_mkdir_event_configs() is unnecessarily
complicated. Simplify it to just return directly on error.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20260506082855.3694761-1-ben.horgan@arm.com
KVM/arm64 and KVM/s390 will eventually share some code. Add me as
a cross-reviewer from the s390 team to arm64 to help to keep both
architectures in sync.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://patch.msgid.link/20260428160527.1378085-16-seiden@linux.ibm.com
[maz: rephrase commit message to use future tense, since this is
merged ahead of the code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Sashiko(locally) reports possiblity of division by zero and
out-of-bounds bitwise shift in trace_clock_update().
Although the clock update is untrusted, we should at least have some
basic checks to avoid undefined behaviours.
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://patch.msgid.link/20260430103724.2151625-1-smostafa@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the following failure to the steal_time test on arm64 by making
the timer address known to the guest.
==== Test Assertion Failure ====
steal_time.c:229: !ret
pid=18514 tid=18514 errno=22 - Invalid argument
1 0x000000000040252f: check_steal_time_uapi at steal_time.c:229 (discriminator 20)
2 (inlined by) main at steal_time.c:537 (discriminator 20)
3 0x0000ffffa23d621b: ?? ??:0
4 0x0000ffffa23d62fb: ?? ??:0
5 0x0000000000402b6f: _start at ??:?
KVM_SET_DEVICE_ATTR failed, rc: -1 errno: 22 (Invalid argument)
Fixes: 40351ed924 ("KVM: selftests: Refactor UAPI tests into dedicated function")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://patch.msgid.link/20260504112808.21276-1-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
gmem_abort() calls kvm_pgtable_stage2_map() to make changes to stage 2. It
does this for both relaxing permissions on an existing mapping and to
install a missing mapping.
kvm_pgtable_stage2_map() doesn't make changes to stage 2 if there is an
existing, valid entry and the new entry modifies only the permissions.
This is checked in:
kvm_pgtable_stage2_map()
stage2_map_walk_leaf()
stage2_map_walker_try_leaf()
stage2_pte_needs_update()
and if only the permissions differ, kvm_pgtable_stage2_map() returns
-EAGAIN and KVM returns to the guest to replay the instruction. The
assumption is that a concurrent fault on a different VCPU already mapped
the faulting IPA, and replaying the instruction will either succeed, or
cause a permission fault, which should be handled with
kvm_pgtable_stage2_relax_perms().
gmem_abort(), on a read or write fault on a system without DIC (instruction
cache invalidation required for data to instruction coherence), installs a
valid entry with read and write permissions, but without executable
permissions. On an execution fault on the same page, gmem_abort() attempts
to relax the permissions to allow execution, but calls
kvm_pgtable_stage2_map() to change the existing, valid, entry.
kvm_pgtable_stage2_map() returns -EAGAIN and KVM resumes execution from the
faulting instruction, which leads to an infinite loop of permission faults
on the same instruction.
Allow the guest to make progress by using kvm_pgtable_stage2_relax_perms()
to relax permissions.
Fixes: a7b57e0995 ("KVM: arm64: Handle guest_memfd-backed guest page faults")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260505094913.75317-1-alexandru.elisei@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When running an nVHE L1, TCR_EL2 is mapped to TCR_EL1. Writes to the
register are trapped and written to TCR_EL1 after a translation.
Booting an nVHE L1 with 52-bit VA isn't working because the translation
was ignoring the DS bit set by the guest, hence causing repeating level
0 faults. Add it in the translation function.
Signed-off-by: Wei-Lin Chang <weilin.chang@arm.com>
Link: https://patch.msgid.link/20260505144735.1496530-1-weilin.chang@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
C1-Pro cores with SME have an erratum where TLBI+DSB does not complete
all outstanding SME accesses. Instead a DSB needs to be executed on the
affected CPUs. The implication is that pages cannot be unmapped from the
host Stage 2 and then provided to a protected guest or to the
hypervisor. Host SME accesses may still complete after this point.
This erratum breaks pKVM's guarantees, and the workaround is hard to
implement as EL2 and EL1 share a security state meaning EL1 can mask
IPIs sent by EL2, leading to interrupt blackouts.
Instead, do this in EL3. This has the advantage of a separate security
state, meaning lower EL cannot mask the IPI. It is also simpler for EL3
to know about CPUs that are off or in PSCI's CPU_SUSPEND.
Add the needed hook to host_stage2_set_owner_metadata_locked(). This
covers the cases where the host loses access to a page:
__pkvm_host_donate_guest()
__pkvm_guest_unshare_host()
host_stage2_set_owner_locked() when owner_id == PKVM_ID_HYP
Since pKVM relies on the firmware call for correctness, check for the
firmware counterpart during protected KVM initialisation and fail the
pKVM initialisation if it is missing.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260505165205.2690919-1-catalin.marinas@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
bio_crypt_set_ctx(), blk_crypto_init_key(), and
blk_crypto_start_using_key() are needed to use inline encryption; see
Documentation/block/inline-encryption.rst. Export them so that
dm-inlinecrypt can use them. The only reason these weren't exported
before was that inline encryption was previously used only by fs/crypto/
which is built-in code.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Make sure to only call pick_next_entity() on an non-empty cfs_rq.
The assumption that p is always enqueued and not delayed, is only true for
wakeup. If p was moved while delayed, pick_next_entity() will dequeue it and
the cfs might become empty. Test if there are still queued tasks before trying
again to determine if p could be the next one to be picked.
There are at least 2 cases:
When cfs becomes idle, it tries to pull tasks but if those pulled tasks are
delayed, they will be dequeued when attached to cfs. attach_tasks() ->
attach_task() -> wakeup_preempt(rq, p, 0);
A misfit task running on cfs A triggers a load balance to be pulled on a better
cpu, the load balance on cfs B starts an active load balance to pulled the
running misfit task. If there is a delayed dequeue task on cfs A, it can be
pulled instead of the previously running misfit task. attach_one_task() ->
attach_task() -> wakeup_preempt(rq, p, 0);
Fixes: ac8e69e693 ("sched/fair: Fix wakeup_preempt_fair() vs delayed dequeue")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260503104503.1732682-1-vincent.guittot@linaro.org
Zhan Xusheng reported running into sporadic a s64 mult overflow in
vruntime_eligible().
When constructing a worst case scenario:
If you have cgroups, then you can have an entity of weight 2 (per
calc_group_shares()), and its vlag should then be bounded by: (slice+TICK_NSEC)
* NICE_0_LOAD, which is around 44 bits as per the comment on entity_key().
The other extreme is 100*NICE_0_LOAD, thus you get:
{key, weight}[] := {
puny: { (slice + TICK_NSEC) * NICE_0_LOAD, 2 },
max: { 0, 100*NICE_0_LOAD },
}
The avg_vruntime() would end up being very close to 0 (which is
zero_vruntime), so no real help making that more accurate.
vruntime_eligible(puny) ends up with:
avg = 2 * puny.key (+ 0)
load = 2 + 100 * NICE_0_LOAD
avg >= puny.key * load
And that is: (slice + TICK_NSEC) * NICE_0_LOAD * NICE_0_LOAD * 100, which will
overflow s64.
Zhan suggested using __builtin_mul_overflow(), however after staring at
compiler output for various architectures using godbolt, it seems that using an
__int128 multiplication often results in better code.
Specifically, a number of architectures already compute the __int128 product to
determine the overflow. Eg. arm64 already has the 'smulh' instruction used. By
explicitly doing an __int128 multiply, it will emit the 'mul; smulh' pattern,
which modern cores can fuse (armv8-a clang-22.1.0). x86_64 has less branches
(no OF handling).
Since Linux has ARCH_SUPPORTS_INT128 to gate __int128 usage, also provide the
__builtin_mul_overflow() variant as a fallback.
[peterz: Changelog and __int128 bits]
Fixes: 556146ce5e ("sched/fair: Avoid overflow in enqueue_entity()")
Reported-by: Zhan Xusheng <zhanxusheng1024@gmail.com>
Closes: https://patch.msgid.link/20260415145742.10359-1-zhanxusheng%40xiaomi.com
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260505103155.GN3102924%40noisy.programming.kicks-ass.net
